{
  "slug": "slic3d",
  "name": "Slic3D",
  "website": "https://www.jaycar.co.nz/3d-printing/filament-3d-printing/3d-printer-filament/c/10AC?brand=SLIC3D",
  "origin": "NZ",
  "priority": false,
  "ofdSlug": "slic3d",
  "filaments": [
    {
      "slug": "petg-basic",
      "brand": "Slic3D",
      "brandSlug": "slic3d",
      "product": "PETG Basic",
      "material": "PETG",
      "materialSlug": "petg",
      "materialLabel": "PETG",
      "nozzleTempC": {
        "min": 230,
        "max": 260,
        "singleValue": false
      },
      "bedTempC": {
        "min": 65,
        "max": 75,
        "singleValue": false
      },
      "speeds": {
        "printMmS": {
          "min": null,
          "max": null
        },
        "volumetricMm3S": {
          "min": null,
          "max": null
        }
      },
      "drying": {
        "maxTempC": 75,
        "hours": null,
        "source": "filament"
      },
      "enclosure": {
        "required": null,
        "chamberTempC": {
          "min": null,
          "ideal": null,
          "max": null
        }
      },
      "hardenedNozzle": null,
      "hardenedNozzleBasis": null,
      "traits": {
        "variantCount": 11,
        "abrasiveVariants": 0,
        "carbonFiberVariants": 0,
        "glassFiberVariants": 0
      },
      "spoolWeightsG": [
        1000
      ],
      "emptySpoolWeightsG": [
        115
      ],
      "diametersMm": [
        1.75
      ],
      "densityGCm3": 1.24,
      "diameterToleranceMm": 0.02,
      "minNozzleDiameterMm": null,
      "shoreHardnessA": null,
      "certifications": [],
      "colors": [
        {
          "name": "Black",
          "hex": "#000000",
          "discontinued": false
        },
        {
          "name": "Blue",
          "hex": "#022CAC",
          "discontinued": false
        },
        {
          "name": "Brown",
          "hex": "#522100",
          "discontinued": false
        },
        {
          "name": "Green",
          "hex": "#008000",
          "discontinued": false
        },
        {
          "name": "Grey",
          "hex": "#ADAEB1",
          "discontinued": false
        },
        {
          "name": "Orange",
          "hex": "#FF7214",
          "discontinued": false
        },
        {
          "name": "Red",
          "hex": "#FF0000",
          "discontinued": false
        },
        {
          "name": "Space Grey",
          "hex": "#4F4F4F",
          "discontinued": false
        },
        {
          "name": "Transparent",
          "hex": "#D6D6D6",
          "discontinued": false
        },
        {
          "name": "White",
          "hex": "#FFFFFF",
          "discontinued": false
        },
        {
          "name": "Yellow",
          "hex": "#FFFF00",
          "discontinued": false
        }
      ],
      "colorCount": 11,
      "discontinued": false,
      "pricePerKg": null,
      "priceCurrency": null,
      "sourceUrl": "https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PETG/filaments/petg_basic/index.json",
      "datasheetUrl": null,
      "safetySheetUrl": null,
      "brandWebsite": "https://www.jaycar.co.nz/3d-printing/filament-3d-printing/3d-printer-filament/c/10AC?brand=SLIC3D",
      "verifiedDate": "2026-10-13",
      "fieldSources": {
        "nozzleTempC": "open-filament-database",
        "bedTempC": "open-filament-database",
        "drying.maxTempC": "open-filament-database"
      },
      "provenance": [
        {
          "source": "Open Filament Database",
          "license": "MIT",
          "repository": "https://github.com/SimplyPrint/open-filament-database",
          "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
          "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
          "dumpVersion": "2026.10.13",
          "generatedAt": "2026-10-13T03:01:57Z",
          "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PETG/filaments/petg_basic/index.json",
          "fields": [
            "bedTempC",
            "brand",
            "colors",
            "densityGCm3",
            "diameterToleranceMm",
            "diametersMm",
            "drying.maxTempC",
            "material",
            "nozzleTempC",
            "product",
            "spoolWeightsG"
          ]
        }
      ],
      "ofd": {
        "brandSlug": "slic3d",
        "material": "PETG",
        "filamentSlug": "petg_basic",
        "uuid": "520755bf-fcfe-4471-9266-09d9237ef83f"
      },
      "spoolman": null,
      "citation": "Slic3D PETG Basic (PETG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 65–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PETG/filaments/petg_basic/index.json; dataset imported 2026-10-13).",
      "faq": [
        {
          "q": "What nozzle temperature does Slic3D PETG Basic recommend?",
          "a": "Slic3D PETG Basic lists a recommended nozzle temperature of 230–260 °C."
        },
        {
          "q": "What bed temperature does Slic3D PETG Basic recommend?",
          "a": "Slic3D PETG Basic lists a recommended bed temperature of 65–75 °C."
        },
        {
          "q": "What print speed does Slic3D PETG Basic list?",
          "a": "Print speed and volumetric flow are not in our current sources in the imported sources."
        },
        {
          "q": "Does Slic3D PETG Basic require an enclosure?",
          "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
        },
        {
          "q": "Does Slic3D PETG Basic require a hardened nozzle?",
          "a": "A hardened-nozzle requirement is not in our current sources."
        },
        {
          "q": "How should Slic3D PETG Basic be dried?",
          "a": "Slic3D PETG Basic lists a maximum drying temperature of 75 °C. Drying time is not in our current sources."
        },
        {
          "q": "What spool weights does Slic3D PETG Basic come in?",
          "a": "Listed spool weights: 1 kg (1000 g)."
        },
        {
          "q": "What is the price per kilogram of Slic3D PETG Basic?",
          "a": "Price per kilogram is not in our current sources."
        }
      ],
      "missing": [
        "speeds.printMmS",
        "speeds.volumetricMm3S",
        "enclosure",
        "hardenedNozzle",
        "pricePerKg"
      ],
      "brandPriority": false
    },
    {
      "slug": "pla-basic",
      "brand": "Slic3D",
      "brandSlug": "slic3d",
      "product": "PLA Basic",
      "material": "PLA",
      "materialSlug": "pla",
      "materialLabel": "PLA",
      "nozzleTempC": {
        "min": 190,
        "max": 230,
        "singleValue": false
      },
      "bedTempC": {
        "min": 35,
        "max": 65,
        "singleValue": false
      },
      "speeds": {
        "printMmS": {
          "min": null,
          "max": null
        },
        "volumetricMm3S": {
          "min": null,
          "max": null
        }
      },
      "drying": {
        "maxTempC": 60,
        "hours": null,
        "source": "filament"
      },
      "enclosure": {
        "required": null,
        "chamberTempC": {
          "min": null,
          "ideal": null,
          "max": null
        }
      },
      "hardenedNozzle": null,
      "hardenedNozzleBasis": null,
      "traits": {
        "variantCount": 10,
        "abrasiveVariants": 0,
        "carbonFiberVariants": 0,
        "glassFiberVariants": 0
      },
      "spoolWeightsG": [
        1000
      ],
      "emptySpoolWeightsG": [
        0
      ],
      "diametersMm": [
        1.75
      ],
      "densityGCm3": 1.24,
      "diameterToleranceMm": 0.02,
      "minNozzleDiameterMm": null,
      "shoreHardnessA": null,
      "certifications": [],
      "colors": [
        {
          "name": "Apple Green",
          "hex": "#C8FD77",
          "discontinued": false
        },
        {
          "name": "Beige",
          "hex": "#F6E2C4",
          "discontinued": false
        },
        {
          "name": "Black",
          "hex": "#000000",
          "discontinued": false
        },
        {
          "name": "Cocoa Brown",
          "hex": "#322F2F",
          "discontinued": false
        },
        {
          "name": "Green",
          "hex": "#00FF44",
          "discontinued": false
        },
        {
          "name": "Grey",
          "hex": "#666666",
          "discontinued": false
        },
        {
          "name": "Pink",
          "hex": "#FFB0D8",
          "discontinued": false
        },
        {
          "name": "Red",
          "hex": "#C80000",
          "discontinued": false
        },
        {
          "name": "White",
          "hex": "#FFFFFF",
          "discontinued": false
        },
        {
          "name": "Yellow",
          "hex": "#FFFF00",
          "discontinued": false
        }
      ],
      "colorCount": 10,
      "discontinued": false,
      "pricePerKg": null,
      "priceCurrency": null,
      "sourceUrl": "https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PLA/filaments/pla_basic/index.json",
      "datasheetUrl": null,
      "safetySheetUrl": null,
      "brandWebsite": "https://www.jaycar.co.nz/3d-printing/filament-3d-printing/3d-printer-filament/c/10AC?brand=SLIC3D",
      "verifiedDate": "2026-10-13",
      "fieldSources": {
        "nozzleTempC": "open-filament-database",
        "bedTempC": "open-filament-database",
        "drying.maxTempC": "open-filament-database"
      },
      "provenance": [
        {
          "source": "Open Filament Database",
          "license": "MIT",
          "repository": "https://github.com/SimplyPrint/open-filament-database",
          "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
          "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
          "dumpVersion": "2026.10.13",
          "generatedAt": "2026-10-13T03:01:57Z",
          "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PLA/filaments/pla_basic/index.json",
          "fields": [
            "bedTempC",
            "brand",
            "colors",
            "densityGCm3",
            "diameterToleranceMm",
            "diametersMm",
            "drying.maxTempC",
            "material",
            "nozzleTempC",
            "product",
            "spoolWeightsG"
          ]
        }
      ],
      "ofd": {
        "brandSlug": "slic3d",
        "material": "PLA",
        "filamentSlug": "pla_basic",
        "uuid": "32827cb9-a4e2-478d-8b4c-f760a7ed9d0d"
      },
      "spoolman": null,
      "citation": "Slic3D PLA Basic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PLA/filaments/pla_basic/index.json; dataset imported 2026-10-13).",
      "faq": [
        {
          "q": "What nozzle temperature does Slic3D PLA Basic recommend?",
          "a": "Slic3D PLA Basic lists a recommended nozzle temperature of 190–230 °C."
        },
        {
          "q": "What bed temperature does Slic3D PLA Basic recommend?",
          "a": "Slic3D PLA Basic lists a recommended bed temperature of 35–65 °C."
        },
        {
          "q": "What print speed does Slic3D PLA Basic list?",
          "a": "Print speed and volumetric flow are not in our current sources in the imported sources."
        },
        {
          "q": "Does Slic3D PLA Basic require an enclosure?",
          "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
        },
        {
          "q": "Does Slic3D PLA Basic require a hardened nozzle?",
          "a": "A hardened-nozzle requirement is not in our current sources."
        },
        {
          "q": "How should Slic3D PLA Basic be dried?",
          "a": "Slic3D PLA Basic lists a maximum drying temperature of 60 °C. Drying time is not in our current sources."
        },
        {
          "q": "What spool weights does Slic3D PLA Basic come in?",
          "a": "Listed spool weights: 1 kg (1000 g)."
        },
        {
          "q": "What is the price per kilogram of Slic3D PLA Basic?",
          "a": "Price per kilogram is not in our current sources."
        }
      ],
      "missing": [
        "speeds.printMmS",
        "speeds.volumetricMm3S",
        "enclosure",
        "hardenedNozzle",
        "pricePerKg"
      ],
      "brandPriority": false
    }
  ]
}