Spectrum PC 275
Search Amazon
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle250–290 °C
- Bed90–130 °C
- Speed—
- Dry—
- Density1.2 g/cm³
Spectrum PC 275, from the Open Filament Database. A blank stays blank.
Nozzle250–290 °C
Bed90–130 °C
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Bed range only partly in reach
- A1 miniBed too hot to print
- P1PBed range only partly in reach
- P1SBed range only partly in reach
- X1CBed range only partly in reach
- MK4SBed range only partly in reach
- Core One+Bed range only partly in reach
- XLBed range only partly in reach
- K1CBed range only partly in reach
- CentauriNot enough data
- Kobra 3 MaxBed range only partly in reach
- Q1 ProNot enough data
- SV08 MaxBed range only partly in reach
Colors
- Iron Grey#626868
- Lime Green#B0E056
- Lion Orange#F88F3C
- Natural#D7DCE0
- Navy Blue#4464A1
- Signal Yellow#EAC251
- Traffic Black#1C2125
- Traffic Red#EA4144
- Traffic White#D4D6D5
- Transparent Blue#0B144F
- Transparent Orange#EA3918
- Transparent Red#8B3945
- Transparent Yellow#F5A534
Related
Answers
Sources & notes
Spectrum PC 275 (PC) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 90–130 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PC/filaments/pc_275/index.json; dataset imported 2026-10-13).
Dataset imported 13 October 2026.
Source · Safety sheet · Brand site · Page JSON
Full specifications
| Material | PC |
|---|---|
| Nozzle temperature | 250–290 °C |
| Bed temperature | 90–130 °C |
| Print speed | — |
| Volumetric flow | — |
| Drying | — |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | — |
| Spool weight | 250 g and 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.02 mmRecorded by the Open Filament Database. It is a required field there, including conventional values. |
| Recorded density | 1.2 g/cm³Recorded by the Open Filament Database. It is a required field there, including conventional values. |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Dataset imported | 13 October 2026Open Filament Database generation date, not a lab test. |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 130 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab A1 mini | Outside limits | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1P | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 130 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1S | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 130 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab X1 Carbon | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 130 °C, above this printer's maximum of 110 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa MK4S | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed range reaches 130 °C, above this printer's maximum of 120 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa CORE One+ | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed range reaches 130 °C, above this printer's maximum of 120 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa XL | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed range reaches 130 °C, above this printer's maximum of 120 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Creality K1C | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 130 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Elegoo Centauri Carbon | — | The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Anycubic Kobra 3 Max | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 130 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Qidi Q1 Pro | — | The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Sovol SV08 Max | Partial | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 130 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
Questions
What nozzle temperature does Spectrum PC 275 recommend?
Spectrum PC 275 lists a recommended nozzle temperature of 250–290 °C.
What bed temperature does Spectrum PC 275 recommend?
Spectrum PC 275 lists a recommended bed temperature of 90–130 °C.
What print speed does Spectrum PC 275 list?
Print speed and volumetric flow are not in our current sources in the imported sources.
Does Spectrum PC 275 require an enclosure?
An enclosure requirement is not in our current sources. No chamber temperature is listed either.
Does Spectrum PC 275 require a hardened nozzle?
A hardened-nozzle requirement is not in our current sources.
How should Spectrum PC 275 be dried?
Drying temperature and drying time for Spectrum PC 275 are not in our current sources.
What spool weights does Spectrum PC 275 come in?
Listed spool weights: 250 g and 1 kg (1000 g).
What is the price per kilogram of Spectrum PC 275?
Price per kilogram is not in our current sources.
Provenance
Open Filament Database
License MIT. Record. Repository. Fields: bedTempC, brand, colors, densityGCm3, diameterToleranceMm, diametersMm, material, nozzleTempC, product, spoolWeightsG.