{
  "compare": {
    "slug": "bambu-lab-pla-basic-vs-polymaker-polylite-pla",
    "a": "bambu-lab/pla-basic",
    "b": "polymaker/polylite-pla",
    "title": "Bambu Lab PLA Basic vs Polymaker Polylite PLA",
    "citation": "Bambu Lab PLA Basic lists a nozzle of 190–230 °C and a bed of 35–45 °C. Polymaker Polylite PLA lists a nozzle of 190–230 °C and a bed of 25–60 °C. Manufacturer checks dated 2026-10-14 are on the filament pages. Where a source leaves a value blank, this comparison leaves it blank."
  },
  "left": {
    "slug": "pla-basic",
    "brand": "Bambu Lab",
    "brandSlug": "bambu-lab",
    "product": "PLA Basic",
    "material": "PLA",
    "materialSlug": "pla",
    "materialLabel": "PLA",
    "nozzleTempC": {
      "min": 190,
      "max": 230,
      "singleValue": false
    },
    "bedTempC": {
      "min": 35,
      "max": 45,
      "singleValue": false
    },
    "speeds": {
      "printMmS": {
        "min": null,
        "max": 300
      },
      "volumetricMm3S": {
        "min": null,
        "max": null
      }
    },
    "drying": {
      "maxTempC": 50,
      "hours": 8,
      "source": "filament"
    },
    "enclosure": {
      "required": null,
      "chamberTempC": {
        "min": null,
        "ideal": null,
        "max": null
      }
    },
    "hardenedNozzle": null,
    "hardenedNozzleBasis": null,
    "traits": {
      "variantCount": 31,
      "abrasiveVariants": 0,
      "carbonFiberVariants": 0,
      "glassFiberVariants": 0
    },
    "spoolWeightsG": [
      1000
    ],
    "emptySpoolWeightsG": [],
    "diametersMm": [
      1.75
    ],
    "densityGCm3": 1.24,
    "diameterToleranceMm": 0.03,
    "minNozzleDiameterMm": null,
    "shoreHardnessA": null,
    "certifications": [],
    "colors": [
      {
        "name": "Bambu Green",
        "hex": "#00AE42",
        "discontinued": false
      },
      {
        "name": "Beige",
        "hex": "#F7E6DE",
        "discontinued": false
      },
      {
        "name": "Black",
        "hex": "#000000",
        "discontinued": false
      },
      {
        "name": "Blue",
        "hex": "#0A2989",
        "discontinued": false
      },
      {
        "name": "Blue Gray",
        "hex": "#5B6579",
        "discontinued": false
      },
      {
        "name": "Bright Green",
        "hex": "#BECF00",
        "discontinued": false
      },
      {
        "name": "Bronze",
        "hex": "#847D48",
        "discontinued": false
      },
      {
        "name": "Brown",
        "hex": "#9D432C",
        "discontinued": false
      },
      {
        "name": "Cobalt Blue",
        "hex": "#0056B8",
        "discontinued": false
      },
      {
        "name": "Cocoa Brown",
        "hex": "#6F5034",
        "discontinued": false
      },
      {
        "name": "Cyan",
        "hex": "#0086D6",
        "discontinued": false
      },
      {
        "name": "Dark Gray",
        "hex": "#545454",
        "discontinued": false
      },
      {
        "name": "Gold",
        "hex": "#E4BD68",
        "discontinued": false
      },
      {
        "name": "Gray",
        "hex": "#8E9089",
        "discontinued": false
      },
      {
        "name": "Green",
        "hex": "#003B44",
        "discontinued": false
      },
      {
        "name": "Hot Pink",
        "hex": "#F5547C",
        "discontinued": false
      },
      {
        "name": "Indigo Purple",
        "hex": "#482960",
        "discontinued": false
      },
      {
        "name": "Jade White",
        "hex": "#FFFFFF",
        "discontinued": false
      },
      {
        "name": "Light Gray",
        "hex": "#D1D3D5",
        "discontinued": false
      },
      {
        "name": "Magenta",
        "hex": "#EC008C",
        "discontinued": false
      },
      {
        "name": "Maroon Red",
        "hex": "#9D2235",
        "discontinued": false
      },
      {
        "name": "Mistletoe Green",
        "hex": "#3F8E43",
        "discontinued": false
      },
      {
        "name": "Orange",
        "hex": "#FF6A13",
        "discontinued": false
      },
      {
        "name": "Pink",
        "hex": "#F55A74",
        "discontinued": false
      },
      {
        "name": "Pumpkin Orange",
        "hex": "#FF9016",
        "discontinued": false
      },
      {
        "name": "Purple",
        "hex": "#5E43B7",
        "discontinued": false
      },
      {
        "name": "Red",
        "hex": "#C12E1F",
        "discontinued": false
      },
      {
        "name": "Silver",
        "hex": "#A6A9AA",
        "discontinued": false
      },
      {
        "name": "Sunflower Yellow",
        "hex": "#FEC600",
        "discontinued": false
      },
      {
        "name": "Turquoise",
        "hex": "#00B1B7",
        "discontinued": false
      },
      {
        "name": "Yellow",
        "hex": "#F4EE2A",
        "discontinued": false
      }
    ],
    "colorCount": 31,
    "discontinued": false,
    "pricePerKg": null,
    "priceCurrency": null,
    "sourceUrl": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943",
    "datasheetUrl": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943",
    "safetySheetUrl": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_MSDS.pdf",
    "brandWebsite": "https://bambulab.com",
    "verifiedDate": "2026-10-13",
    "fieldSources": {
      "nozzleTempC": "bambu-pla-basic-tds",
      "bedTempC": "bambu-pla-basic-tds",
      "speeds.printMmS": "bambu-pla-basic-tds",
      "drying": "bambu-pla-basic-tds"
    },
    "provenance": [
      {
        "source": "Open Filament Database",
        "license": "MIT",
        "repository": "https://github.com/SimplyPrint/open-filament-database",
        "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
        "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
        "dumpVersion": "2026.10.13",
        "generatedAt": "2026-10-13T03:01:57Z",
        "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/basic/index.json",
        "fields": [
          "brand",
          "colors",
          "densityGCm3",
          "diameterToleranceMm",
          "diametersMm",
          "material",
          "product",
          "spoolWeightsG"
        ]
      },
      {
        "source": "Bambu PLA Basic technical data sheet V3.0",
        "license": "",
        "repository": "",
        "recordUrl": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943",
        "fields": [
          "nozzleTempC",
          "bedTempC",
          "speeds.printMmS",
          "drying"
        ]
      },
      {
        "source": "Bambu Lab US store PLA Basic page",
        "license": "",
        "repository": "",
        "recordUrl": "https://us.store.bambulab.com/products/pla-basic-filament",
        "fields": []
      }
    ],
    "ofd": {
      "brandSlug": "bambu_lab",
      "material": "PLA",
      "filamentSlug": "basic",
      "uuid": "7aaea8e5-c6c2-4858-87b3-7d2c64aa9bdd"
    },
    "spoolman": null,
    "citation": "Bambu Lab PLA Basic (PLA) lists a nozzle temperature of 190–230 °C, a bed temperature of 35–45 °C, drying in a blast oven at 50 °C for 8 h, and a print speed under 300 mm/s, according to Bambu Filament Technical Data Sheet V3.0 (https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943, checked 2026-10-14). The US store page (https://us.store.bambulab.com/products/pla-basic-filament) does not list those temperatures. It does say the filament is AMS compatible and that parameters are stored in RFID. The Open Filament Database left nozzle and bed empty (dataset verified date 2026-10-13).",
    "faq": [
      {
        "q": "What nozzle temperature does Bambu Lab PLA Basic recommend?",
        "a": "Bambu Lab PLA Basic lists a recommended nozzle temperature of 190–230 °C on technical data sheet V3.0."
      },
      {
        "q": "What bed temperature does Bambu Lab PLA Basic recommend?",
        "a": "Bambu Lab PLA Basic lists a recommended bed temperature of 35–45 °C on technical data sheet V3.0."
      },
      {
        "q": "What print speed does Bambu Lab PLA Basic list?",
        "a": "Bambu Lab PLA Basic lists a print speed under 300 mm/s. Volumetric flow is not listed."
      },
      {
        "q": "Does Bambu Lab PLA Basic require an enclosure?",
        "a": "An enclosure requirement is not listed. No chamber temperature is listed either."
      },
      {
        "q": "Does Bambu Lab PLA Basic require a hardened nozzle?",
        "a": "A hardened-nozzle requirement is not listed."
      },
      {
        "q": "How should Bambu Lab PLA Basic be dried?",
        "a": "The data sheet lists blast-oven drying at 50 °C for 8 h, and X1 heatbed drying at 60–70 °C for 12 h."
      },
      {
        "q": "What spool weights does Bambu Lab PLA Basic come in?",
        "a": "Listed spool weights: 1 kg (1000 g)."
      },
      {
        "q": "What is the price per kilogram of Bambu Lab PLA Basic?",
        "a": "Price per kilogram is not listed."
      }
    ],
    "missing": [
      "nozzleTempC",
      "bedTempC",
      "speeds.volumetricMm3S",
      "enclosure",
      "hardenedNozzle",
      "pricePerKg"
    ],
    "checked": {
      "verifiedAt": "2026-10-14",
      "sourceUrl": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943",
      "sourceLabel": "Bambu PLA Basic technical data sheet V3.0",
      "incomplete": false,
      "densityNote": null,
      "notes": [
        "The US store page does not list a numeric nozzle or bed temperature. The numbers are from the technical data sheet.",
        "The store page says the filament is compatible with all AMS series and that print parameters are embedded in RFID.",
        "Drying on the data sheet is a blast oven at 50 °C for 8 h. The same sheet also lists the X1 heatbed at 60–70 °C for 12 h.",
        "Glass transition temperature 60 °C. Heat deflection temperature 57 °C at 0.45 MPa and 54 °C at 1.8 MPa."
      ]
    },
    "brandPriority": true
  },
  "right": {
    "slug": "polylite-pla",
    "brand": "Polymaker",
    "brandSlug": "polymaker",
    "product": "Polylite PLA",
    "material": "PLA",
    "materialSlug": "pla",
    "materialLabel": "PLA",
    "nozzleTempC": {
      "min": 190,
      "max": 230,
      "singleValue": false
    },
    "bedTempC": {
      "min": 25,
      "max": 60,
      "singleValue": false
    },
    "speeds": {
      "printMmS": {
        "min": 40,
        "max": 60
      },
      "volumetricMm3S": {
        "min": null,
        "max": null
      }
    },
    "drying": {
      "maxTempC": 55,
      "hours": 6,
      "source": "filament"
    },
    "enclosure": {
      "required": null,
      "chamberTempC": {
        "min": null,
        "ideal": null,
        "max": null
      }
    },
    "hardenedNozzle": null,
    "hardenedNozzleBasis": null,
    "traits": {
      "variantCount": 39,
      "abrasiveVariants": 0,
      "carbonFiberVariants": 0,
      "glassFiberVariants": 0
    },
    "spoolWeightsG": [
      1000,
      3000,
      5000
    ],
    "emptySpoolWeightsG": [],
    "diametersMm": [
      1.75,
      2.85
    ],
    "densityGCm3": 1.17,
    "diameterToleranceMm": 0.02,
    "minNozzleDiameterMm": null,
    "shoreHardnessA": null,
    "certifications": [],
    "colors": [
      {
        "name": "Aqua Blue",
        "hex": "#39B9DB",
        "discontinued": false
      },
      {
        "name": "Army Green",
        "hex": "#857C00",
        "discontinued": false
      },
      {
        "name": "Azure Blue",
        "hex": "#0066D9",
        "discontinued": false
      },
      {
        "name": "Beige",
        "hex": "#D8CF8C",
        "discontinued": false
      },
      {
        "name": "Black",
        "hex": "#000000",
        "discontinued": false
      },
      {
        "name": "Blue",
        "hex": "#0266BB",
        "discontinued": false
      },
      {
        "name": "Blue Green",
        "hex": "#00272F",
        "discontinued": false
      },
      {
        "name": "Brown",
        "hex": "#7E472A",
        "discontinued": false
      },
      {
        "name": "Cold White",
        "hex": "#EAECF5",
        "discontinued": false
      },
      {
        "name": "Cos Version A",
        "hex": "#B2B8B8",
        "discontinued": false
      },
      {
        "name": "Cos Version B",
        "hex": "#B2B8B8",
        "discontinued": false
      },
      {
        "name": "Cream",
        "hex": "#E9CB9B",
        "discontinued": false
      },
      {
        "name": "Dark Blue",
        "hex": "#033877",
        "discontinued": false
      },
      {
        "name": "Dark Grey",
        "hex": "#6A6C6E",
        "discontinued": false
      },
      {
        "name": "Dark Grey Green",
        "hex": "#4C5E46",
        "discontinued": false
      },
      {
        "name": "Dark Purple",
        "hex": "#292036",
        "discontinued": false
      },
      {
        "name": "Green",
        "hex": "#06924D",
        "discontinued": false
      },
      {
        "name": "Grey",
        "hex": "#B1B3C5",
        "discontinued": false
      },
      {
        "name": "Jungle Green",
        "hex": "#446B20",
        "discontinued": false
      },
      {
        "name": "Lemon Yellow",
        "hex": "#FADB24",
        "discontinued": false
      },
      {
        "name": "Light Blue",
        "hex": "#8CC6E4",
        "discontinued": false
      },
      {
        "name": "Light Green",
        "hex": "#BCD69B",
        "discontinued": false
      },
      {
        "name": "Light Red",
        "hex": "#F54053",
        "discontinued": false
      },
      {
        "name": "Light Yellow",
        "hex": "#FCE575",
        "discontinued": false
      },
      {
        "name": "Lime Green",
        "hex": "#DEDE00",
        "discontinued": false
      },
      {
        "name": "Lw",
        "hex": "#EF3340",
        "discontinued": false
      },
      {
        "name": "Magenta",
        "hex": "#F2306E",
        "discontinued": false
      },
      {
        "name": "Natural",
        "hex": "#DFDFD3",
        "discontinued": false
      },
      {
        "name": "Olive Brown",
        "hex": "#A99465",
        "discontinued": false
      },
      {
        "name": "Olive Green",
        "hex": "#857C00",
        "discontinued": false
      },
      {
        "name": "Orange",
        "hex": "#FD9106",
        "discontinued": false
      },
      {
        "name": "Pink",
        "hex": "#F09BB5",
        "discontinued": false
      },
      {
        "name": "Polymaker Teal",
        "hex": "#00B4BC",
        "discontinued": false
      },
      {
        "name": "Purple",
        "hex": "#6C47B2",
        "discontinued": false
      },
      {
        "name": "Red",
        "hex": "#E72F1D",
        "discontinued": false
      },
      {
        "name": "Steel Grey",
        "hex": "#616469",
        "discontinued": false
      },
      {
        "name": "Stone Blue",
        "hex": "#40719A",
        "discontinued": false
      },
      {
        "name": "White",
        "hex": "#E2DEDB",
        "discontinued": false
      },
      {
        "name": "Yellow",
        "hex": "#FBE200",
        "discontinued": false
      }
    ],
    "colorCount": 39,
    "discontinued": false,
    "pricePerKg": null,
    "priceCurrency": null,
    "sourceUrl": "https://us.polymaker.com/products/polylite-pla",
    "datasheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA_TDS_EN_V5.4.pdf",
    "safetySheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA_SDS_US_EN_V1.pdf",
    "brandWebsite": "https://polymaker.com/",
    "verifiedDate": "2026-10-13",
    "fieldSources": {
      "nozzleTempC": "open-filament-database",
      "bedTempC": "polymaker-product-page",
      "speeds.printMmS": "polymaker-product-page",
      "drying": "polymaker-product-page",
      "densityGCm3": "polymaker-product-page"
    },
    "provenance": [
      {
        "source": "Open Filament Database",
        "license": "MIT",
        "repository": "https://github.com/SimplyPrint/open-filament-database",
        "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
        "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
        "dumpVersion": "2026.10.13",
        "generatedAt": "2026-10-13T03:01:57Z",
        "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polylite_pla/index.json",
        "fields": [
          "bedTempC",
          "brand",
          "colors",
          "densityGCm3",
          "diameterToleranceMm",
          "diametersMm",
          "material",
          "nozzleTempC",
          "product",
          "spoolWeightsG"
        ]
      },
      {
        "source": "Polymaker US product page",
        "license": "",
        "repository": "",
        "recordUrl": "https://us.polymaker.com/products/polylite-pla",
        "fields": [
          "bedTempC",
          "speeds.printMmS",
          "drying",
          "densityGCm3"
        ]
      }
    ],
    "ofd": {
      "brandSlug": "polymaker",
      "material": "PLA",
      "filamentSlug": "polylite_pla",
      "uuid": "72cd30b9-3549-422c-8385-a273c8fbcd53"
    },
    "spoolman": null,
    "citation": "Polymaker Polylite PLA (PLA) lists a nozzle temperature of 190–230 °C, a bed temperature of 25–60 °C, a print speed of 40–60 mm/s, and drying at 55 °C for 6 h, according to the Polymaker US product page (https://us.polymaker.com/products/polylite-pla, checked 2026-10-14). The properties table lists density 1.17 g/cm³; the page copy says 1.19 g/cm³. The Open Filament Database record listed a bed of 50–70 °C and density 1.24 (dataset verified date 2026-10-13).",
    "faq": [
      {
        "q": "What nozzle temperature does Polymaker Polylite PLA recommend?",
        "a": "Polymaker Polylite PLA lists a recommended nozzle temperature of 190–230 °C."
      },
      {
        "q": "What bed temperature does Polymaker Polylite PLA recommend?",
        "a": "Polymaker Polylite PLA lists a recommended bed temperature of 25–60 °C on the US product page checked 2026-10-14."
      },
      {
        "q": "What print speed does Polymaker Polylite PLA list?",
        "a": "Polymaker Polylite PLA lists a print speed of 40–60 mm/s. Volumetric flow is not listed."
      },
      {
        "q": "Does Polymaker Polylite PLA require an enclosure?",
        "a": "An enclosure requirement is not listed. No chamber temperature is listed either."
      },
      {
        "q": "Does Polymaker Polylite PLA require a hardened nozzle?",
        "a": "A hardened-nozzle requirement is not listed."
      },
      {
        "q": "How should Polymaker Polylite PLA be dried?",
        "a": "Dry Polymaker Polylite PLA at 55 °C for 6 h if it has absorbed moisture, according to the US product page."
      },
      {
        "q": "What spool weights does Polymaker Polylite PLA come in?",
        "a": "Listed spool weights: 1 kg (1000 g), 3 kg (3000 g), and 5 kg (5000 g)."
      },
      {
        "q": "What is the price per kilogram of Polymaker Polylite PLA?",
        "a": "Price per kilogram is not listed."
      }
    ],
    "missing": [
      "speeds.volumetricMm3S",
      "enclosure",
      "hardenedNozzle",
      "pricePerKg"
    ],
    "checked": {
      "verifiedAt": "2026-10-14",
      "sourceUrl": "https://us.polymaker.com/products/polylite-pla",
      "sourceLabel": "Polymaker US PolyLite PLA product page",
      "incomplete": false,
      "densityNote": "The page copy says 1.19 g/cm³. The properties table lists 1.17 g/cm³ (ISO 1183). This record uses 1.17. The Open Filament Database listed 1.24.",
      "notes": [
        "Glass transition temperature 61 °C (ISO 11357). Heat deflection temperature 60 °C at 0.45 MPa (ISO 75).",
        "Cooling fan on."
      ]
    },
    "brandPriority": true
  }
}