{
  "compare": {
    "slug": "pla-vs-petg",
    "a": "polymaker/polylite-pla",
    "b": "polymaker/polylite-petg",
    "title": "PLA vs PETG",
    "citation": "Polymaker Polylite PLA lists a nozzle of 190–230 °C (374–446 °F), a bed of 25–60 °C (77–140 °F), and drying at 55 °C (131 °F) for 6 h on the US product page checked 2026-10-14. Polymaker Polylite PETG lists a nozzle of 220–250 °C (428–482 °F), a bed of 70–90 °C (158–194 °F), and drying at 65 °C (149 °F) for 6 h. Both records leave enclosure required blank. The US PolyLite PLA page lists a glass transition temperature of 61 °C (142 °F) and a heat deflection temperature of 60 °C (140 °F) at 0.45 MPa. The PolyLite PETG record does not list glass transition, heat deflection, or an impact figure. The catalog has no UV rating for either row.",
    "reading": "Nozzle, bed, and drying in the table are the catalog cells for these two Polymaker rows. Enclosure required is blank on both, so this page does not mark either spool as enclosure-required. Outdoor UV is not a column. The outdoor guide ranks ASA for sun, PETG as the cheaper fallback, and PLA as the material that softens outside. That ranking is community process, not a UV-hours test on these spools. Toughness is not a stored test here. PolyLite PLA’s page lists glass transition 61 °C and heat deflection 60 °C at 0.45 MPa. PolyLite PETG does not list glass transition, heat deflection, or impact."
  },
  "left": {
    "slug": "polylite-pla",
    "brand": "Polymaker",
    "brandSlug": "polymaker",
    "product": "Polylite PLA",
    "material": "PLA",
    "materialSlug": "pla",
    "materialLabel": "PLA",
    "nozzleTempC": {
      "min": 190,
      "max": 230,
      "singleValue": false
    },
    "bedTempC": {
      "min": 25,
      "max": 60,
      "singleValue": false
    },
    "speeds": {
      "printMmS": {
        "min": 40,
        "max": 60
      },
      "volumetricMm3S": {
        "min": null,
        "max": null
      }
    },
    "drying": {
      "maxTempC": 55,
      "hours": 6,
      "source": "filament"
    },
    "enclosure": {
      "required": null,
      "chamberTempC": {
        "min": null,
        "ideal": null,
        "max": null
      }
    },
    "hardenedNozzle": null,
    "hardenedNozzleBasis": null,
    "traits": {
      "variantCount": 39,
      "abrasiveVariants": 0,
      "carbonFiberVariants": 0,
      "glassFiberVariants": 0
    },
    "spoolWeightsG": [
      1000,
      3000,
      5000
    ],
    "emptySpoolWeightsG": [],
    "diametersMm": [
      1.75,
      2.85
    ],
    "densityGCm3": 1.17,
    "diameterToleranceMm": 0.02,
    "minNozzleDiameterMm": null,
    "shoreHardnessA": null,
    "certifications": [],
    "colors": [
      {
        "name": "Aqua Blue",
        "hex": "#39B9DB",
        "discontinued": false
      },
      {
        "name": "Army Green",
        "hex": "#857C00",
        "discontinued": false
      },
      {
        "name": "Azure Blue",
        "hex": "#0066D9",
        "discontinued": false
      },
      {
        "name": "Beige",
        "hex": "#D8CF8C",
        "discontinued": false
      },
      {
        "name": "Black",
        "hex": "#000000",
        "discontinued": false
      },
      {
        "name": "Blue",
        "hex": "#0266BB",
        "discontinued": false
      },
      {
        "name": "Blue Green",
        "hex": "#00272F",
        "discontinued": false
      },
      {
        "name": "Brown",
        "hex": "#7E472A",
        "discontinued": false
      },
      {
        "name": "Cold White",
        "hex": "#EAECF5",
        "discontinued": false
      },
      {
        "name": "Cos Version A",
        "hex": "#B2B8B8",
        "discontinued": false
      },
      {
        "name": "Cos Version B",
        "hex": "#B2B8B8",
        "discontinued": false
      },
      {
        "name": "Cream",
        "hex": "#E9CB9B",
        "discontinued": false
      },
      {
        "name": "Dark Blue",
        "hex": "#033877",
        "discontinued": false
      },
      {
        "name": "Dark Grey",
        "hex": "#6A6C6E",
        "discontinued": false
      },
      {
        "name": "Dark Grey Green",
        "hex": "#4C5E46",
        "discontinued": false
      },
      {
        "name": "Dark Purple",
        "hex": "#292036",
        "discontinued": false
      },
      {
        "name": "Green",
        "hex": "#06924D",
        "discontinued": false
      },
      {
        "name": "Grey",
        "hex": "#B1B3C5",
        "discontinued": false
      },
      {
        "name": "Jungle Green",
        "hex": "#446B20",
        "discontinued": false
      },
      {
        "name": "Lemon Yellow",
        "hex": "#FADB24",
        "discontinued": false
      },
      {
        "name": "Light Blue",
        "hex": "#8CC6E4",
        "discontinued": false
      },
      {
        "name": "Light Green",
        "hex": "#BCD69B",
        "discontinued": false
      },
      {
        "name": "Light Red",
        "hex": "#F54053",
        "discontinued": false
      },
      {
        "name": "Light Yellow",
        "hex": "#FCE575",
        "discontinued": false
      },
      {
        "name": "Lime Green",
        "hex": "#DEDE00",
        "discontinued": false
      },
      {
        "name": "Lw",
        "hex": "#EF3340",
        "discontinued": false
      },
      {
        "name": "Magenta",
        "hex": "#F2306E",
        "discontinued": false
      },
      {
        "name": "Natural",
        "hex": "#DFDFD3",
        "discontinued": false
      },
      {
        "name": "Olive Brown",
        "hex": "#A99465",
        "discontinued": false
      },
      {
        "name": "Olive Green",
        "hex": "#857C00",
        "discontinued": false
      },
      {
        "name": "Orange",
        "hex": "#FD9106",
        "discontinued": false
      },
      {
        "name": "Pink",
        "hex": "#F09BB5",
        "discontinued": false
      },
      {
        "name": "Polymaker Teal",
        "hex": "#00B4BC",
        "discontinued": false
      },
      {
        "name": "Purple",
        "hex": "#6C47B2",
        "discontinued": false
      },
      {
        "name": "Red",
        "hex": "#E72F1D",
        "discontinued": false
      },
      {
        "name": "Steel Grey",
        "hex": "#616469",
        "discontinued": false
      },
      {
        "name": "Stone Blue",
        "hex": "#40719A",
        "discontinued": false
      },
      {
        "name": "White",
        "hex": "#E2DEDB",
        "discontinued": false
      },
      {
        "name": "Yellow",
        "hex": "#FBE200",
        "discontinued": false
      }
    ],
    "colorCount": 39,
    "discontinued": false,
    "pricePerKg": null,
    "priceCurrency": null,
    "sourceUrl": "https://us.polymaker.com/products/polylite-pla",
    "datasheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA_TDS_EN_V5.4.pdf",
    "safetySheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA_SDS_US_EN_V1.pdf",
    "brandWebsite": "https://polymaker.com/",
    "verifiedDate": "2026-10-13",
    "fieldSources": {
      "nozzleTempC": "open-filament-database",
      "bedTempC": "polymaker-product-page",
      "speeds.printMmS": "polymaker-product-page",
      "drying": "polymaker-product-page",
      "densityGCm3": "polymaker-product-page"
    },
    "provenance": [
      {
        "source": "Open Filament Database",
        "license": "MIT",
        "repository": "https://github.com/SimplyPrint/open-filament-database",
        "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
        "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
        "dumpVersion": "2026.10.13",
        "generatedAt": "2026-10-13T03:01:57Z",
        "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polylite_pla/index.json",
        "fields": [
          "bedTempC",
          "brand",
          "colors",
          "densityGCm3",
          "diameterToleranceMm",
          "diametersMm",
          "material",
          "nozzleTempC",
          "product",
          "spoolWeightsG"
        ]
      },
      {
        "source": "Polymaker US product page",
        "license": "",
        "repository": "",
        "recordUrl": "https://us.polymaker.com/products/polylite-pla",
        "fields": [
          "bedTempC",
          "speeds.printMmS",
          "drying",
          "densityGCm3"
        ]
      }
    ],
    "ofd": {
      "brandSlug": "polymaker",
      "material": "PLA",
      "filamentSlug": "polylite_pla",
      "uuid": "72cd30b9-3549-422c-8385-a273c8fbcd53"
    },
    "spoolman": null,
    "citation": "Polymaker Polylite PLA (PLA) lists a nozzle temperature of 190–230 °C (374–446 °F), a bed temperature of 25–60 °C (77–140 °F), a print speed of 40–60 mm/s, and drying at 55 °C (131 °F) for 6 h, according to the Polymaker US product page (https://us.polymaker.com/products/polylite-pla, checked 2026-10-14). The properties table lists density 1.17 g/cm³; the page copy says 1.19 g/cm³. The Open Filament Database record listed a bed of 50–70 °C (122–158 °F) and density 1.24 (dataset imported 2026-10-13).",
    "faq": [
      {
        "q": "What nozzle temperature does Polymaker Polylite PLA recommend?",
        "a": "Polymaker Polylite PLA lists a recommended nozzle temperature of 190–230 °C (374–446 °F)."
      },
      {
        "q": "What bed temperature does Polymaker Polylite PLA recommend?",
        "a": "Polymaker Polylite PLA lists a recommended bed temperature of 25–60 °C (77–140 °F) on the US product page checked 2026-10-14."
      },
      {
        "q": "What print speed does Polymaker Polylite PLA list?",
        "a": "Polymaker Polylite PLA lists a print speed of 40–60 mm/s. Volumetric flow is not in our current sources."
      },
      {
        "q": "Does Polymaker Polylite PLA require an enclosure?",
        "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
      },
      {
        "q": "Does Polymaker Polylite PLA require a hardened nozzle?",
        "a": "A hardened-nozzle requirement is not in our current sources."
      },
      {
        "q": "How should Polymaker Polylite PLA be dried?",
        "a": "Dry Polymaker Polylite PLA at 55 °C (131 °F) for 6 h if it has absorbed moisture, according to the US product page."
      },
      {
        "q": "What spool weights does Polymaker Polylite PLA come in?",
        "a": "Listed spool weights: 1 kg (1000 g), 3 kg (3000 g), and 5 kg (5000 g)."
      },
      {
        "q": "What is the price per kilogram of Polymaker Polylite PLA?",
        "a": "Price per kilogram is not in our current sources."
      }
    ],
    "missing": [
      "speeds.volumetricMm3S",
      "enclosure",
      "hardenedNozzle",
      "pricePerKg"
    ],
    "checked": {
      "verifiedAt": "2026-10-14",
      "sourceUrl": "https://us.polymaker.com/products/polylite-pla",
      "sourceLabel": "Polymaker US PolyLite PLA product page",
      "incomplete": false,
      "densityNote": "The page copy says 1.19 g/cm³. The properties table lists 1.17 g/cm³ (ISO 1183). This record uses 1.17. The Open Filament Database listed 1.24.",
      "notes": [
        "Glass transition temperature 61 °C (ISO 11357). Heat deflection temperature 60 °C at 0.45 MPa (ISO 75).",
        "Cooling fan on."
      ]
    },
    "brandPriority": true
  },
  "right": {
    "slug": "polylite-petg",
    "brand": "Polymaker",
    "brandSlug": "polymaker",
    "product": "Polylite PETG",
    "material": "PETG",
    "materialSlug": "petg",
    "materialLabel": "PETG",
    "nozzleTempC": {
      "min": 220,
      "max": 250,
      "singleValue": false
    },
    "bedTempC": {
      "min": 70,
      "max": 90,
      "singleValue": false
    },
    "speeds": {
      "printMmS": {
        "min": null,
        "max": null
      },
      "volumetricMm3S": {
        "min": null,
        "max": null
      }
    },
    "drying": {
      "maxTempC": 65,
      "hours": 6,
      "source": "filament"
    },
    "enclosure": {
      "required": null,
      "chamberTempC": {
        "min": null,
        "ideal": null,
        "max": null
      }
    },
    "hardenedNozzle": null,
    "hardenedNozzleBasis": null,
    "traits": {
      "variantCount": 24,
      "abrasiveVariants": 0,
      "carbonFiberVariants": 0,
      "glassFiberVariants": 0
    },
    "spoolWeightsG": [
      1000,
      3000
    ],
    "emptySpoolWeightsG": [],
    "diametersMm": [
      1.75
    ],
    "densityGCm3": 1.25,
    "diameterToleranceMm": 0.02,
    "minNozzleDiameterMm": null,
    "shoreHardnessA": null,
    "certifications": [],
    "colors": [
      {
        "name": "Blue",
        "hex": "#0E21AE",
        "discontinued": false
      },
      {
        "name": "Clear",
        "hex": "#E4E7E5",
        "discontinued": false
      },
      {
        "name": "Dark Blue",
        "hex": "#1E2F5A",
        "discontinued": false
      },
      {
        "name": "Dark Green",
        "hex": "#404720",
        "discontinued": false
      },
      {
        "name": "Dark Grey",
        "hex": "#6A6C6E",
        "discontinued": false
      },
      {
        "name": "Dark Purple",
        "hex": "#492972",
        "discontinued": false
      },
      {
        "name": "Electric Blue",
        "hex": "#0378D0",
        "discontinued": false
      },
      {
        "name": "Gold",
        "hex": "#CE8D00",
        "discontinued": false
      },
      {
        "name": "Green",
        "hex": "#60AB61",
        "discontinued": false
      },
      {
        "name": "Grey",
        "hex": "#B1B3C5",
        "discontinued": false
      },
      {
        "name": "Lime",
        "hex": "#DEDE00",
        "discontinued": false
      },
      {
        "name": "Magenta",
        "hex": "#EB0075",
        "discontinued": false
      },
      {
        "name": "Orange",
        "hex": "#F97429",
        "discontinued": false
      },
      {
        "name": "Pink",
        "hex": "#F09BB5",
        "discontinued": false
      },
      {
        "name": "Polymaker Teal",
        "hex": "#36DBE7",
        "discontinued": false
      },
      {
        "name": "Purple",
        "hex": "#6C5BB1",
        "discontinued": false
      },
      {
        "name": "Red",
        "hex": "#E20010",
        "discontinued": false
      },
      {
        "name": "Silver",
        "hex": "#999AA0",
        "discontinued": false
      },
      {
        "name": "Translucent",
        "hex": "#E4E7E5",
        "discontinued": false
      },
      {
        "name": "Translucent Blue",
        "hex": "#003287",
        "discontinued": false
      },
      {
        "name": "Translucent Green",
        "hex": "#06924D",
        "discontinued": false
      },
      {
        "name": "Translucent Red",
        "hex": "#E20010",
        "discontinued": false
      },
      {
        "name": "White",
        "hex": "#FFFFFF",
        "discontinued": false
      },
      {
        "name": "Yellow",
        "hex": "#F3B400",
        "discontinued": false
      }
    ],
    "colorCount": 24,
    "discontinued": false,
    "pricePerKg": null,
    "priceCurrency": null,
    "sourceUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PETG_TDS_EN_V5.4.pdf",
    "datasheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PETG_TDS_EN_V5.4.pdf",
    "safetySheetUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/Polymaker_PETG_SDS_US_EN_V1.0.pdf",
    "brandWebsite": "https://polymaker.com/",
    "verifiedDate": "2026-10-13",
    "fieldSources": {
      "nozzleTempC": "open-filament-database",
      "bedTempC": "open-filament-database"
    },
    "provenance": [
      {
        "source": "Open Filament Database",
        "license": "MIT",
        "repository": "https://github.com/SimplyPrint/open-filament-database",
        "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
        "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
        "dumpVersion": "2026.10.13",
        "generatedAt": "2026-10-13T03:01:57Z",
        "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PETG/filaments/polylite_petg/index.json",
        "fields": [
          "bedTempC",
          "brand",
          "colors",
          "densityGCm3",
          "diameterToleranceMm",
          "diametersMm",
          "material",
          "nozzleTempC",
          "product",
          "spoolWeightsG"
        ]
      },
      {
        "source": "Polymaker Polylite PETG technical data sheet",
        "license": "Manufacturer technical data sheet",
        "repository": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PETG_TDS_EN_V5.4.pdf",
        "recordUrl": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PETG_TDS_EN_V5.4.pdf",
        "fields": [
          "drying"
        ]
      }
    ],
    "ofd": {
      "brandSlug": "polymaker",
      "material": "PETG",
      "filamentSlug": "polylite_petg",
      "uuid": "11d193a7-5462-45cc-8f4a-06716a1e966b"
    },
    "spoolman": null,
    "citation": "Polymaker Polylite PETG (PETG) has a recommended nozzle temperature of 220–250 °C (428–482 °F) and a recommended bed temperature of 70–90 °C (158–194 °F), according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PETG/filaments/polylite_petg/index.json; dataset imported 2026-10-13). Polymaker Polylite PETG also lists drying 65 °C (149 °F) for 6 h, from Polymaker Polylite PETG technical data sheet (https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PETG_TDS_EN_V5.4.pdf), checked 2026-10-15.",
    "faq": [
      {
        "q": "What nozzle temperature does Polymaker Polylite PETG recommend?",
        "a": "Polymaker Polylite PETG lists a recommended nozzle temperature of 220–250 °C (428–482 °F)."
      },
      {
        "q": "What bed temperature does Polymaker Polylite PETG recommend?",
        "a": "Polymaker Polylite PETG lists a recommended bed temperature of 70–90 °C (158–194 °F)."
      },
      {
        "q": "What print speed does Polymaker Polylite PETG list?",
        "a": "Print speed and volumetric flow are not in our current sources in the imported sources."
      },
      {
        "q": "Does Polymaker Polylite PETG require an enclosure?",
        "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
      },
      {
        "q": "Does Polymaker Polylite PETG require a hardened nozzle?",
        "a": "A hardened-nozzle requirement is not in our current sources."
      },
      {
        "q": "How should Polymaker Polylite PETG be dried?",
        "a": "Dry Polymaker Polylite PETG at 65 °C (149 °F) for 6 h, from the manufacturer technical data sheet."
      },
      {
        "q": "What spool weights does Polymaker Polylite PETG come in?",
        "a": "Listed spool weights: 1 kg (1000 g) and 3 kg (3000 g)."
      },
      {
        "q": "What is the price per kilogram of Polymaker Polylite PETG?",
        "a": "Price per kilogram is not in our current sources."
      }
    ],
    "missing": [
      "speeds.printMmS",
      "speeds.volumetricMm3S",
      "enclosure",
      "hardenedNozzle",
      "pricePerKg"
    ],
    "brandPriority": true
  }
}