# FilamentFacts

Temperatures are copied from the cited source. Not listed means the source did not publish that value. Do not infer it.
Deal prices are not in the public pages. Those pages show brand, material, and percent off only.

## Answers

- A beginner should start with PLA. Prusa calls it one of the easiest materials to print, and the r/3Dprinting beginner threads say to learn PLA before PETG or anything filled. https://filamentfacts.com/answers/beginners
- Most PLA failures are the first layer, a wet or cheap spool, or the temperature. Clean the plate with dish soap, reset the Z offset, print around 200–220 °C, and start from a known PLA rather than a bargain spool. https://filamentfacts.com/answers/pla_print
- PLA+ is a marketing label, not a standard material. It is often a bit tougher than that brand’s plain PLA, and the brand matters more than the plus sign. https://filamentfacts.com/answers/pla_vs_plaplus
- For a part that stays outdoors, use ASA. Prusa describes ASA as the outdoor technical material because of UV and temperature resistance, and PETG is the fallback when the printer is not enclosed. https://filamentfacts.com/answers/outdoors
- Use ASA for a part that stays outdoors in the sun. PETG is the cheaper community fallback, ABS is the third option, and plain PLA softens and degrades outside. Dark colors get much hotter in the sun. https://filamentfacts.com/answers/outdoor
- For a part that sits in a car, use ASA, not PLA. Prusa rates ASA for temperature resistance up to 93 °C and for outdoor UV, which is the combination a closed cabin in the sun actually is. https://filamentfacts.com/answers/car-interior
- For heat, skip PLA. Prusa says PLA softens above about 60 °C and gives ASA temperature resistance up to 93 °C; carbon-fiber nylon is the step up when the printer can reach its listed nozzle range and a hardened nozzle is appropriate. https://filamentfacts.com/answers/heat
- For a strong functional part, use carbon-fiber nylon if the printer can reach the listed nozzle temperature and the nozzle can take an abrasive filament; otherwise use PETG or an impact-modified PLA, and do not pick ordinary PLA for a part that will be hit or heated. https://filamentfacts.com/answers/strength
- Use TPU when the part has to bend. Prusa’s material guide lists Flex as the bendable material, and the spools below are TPU records that include a nozzle temperature. https://filamentfacts.com/answers/flexible
- Print TPU 95A. On a direct drive, the community pace is 20–40 mm/s with little retraction and a dry spool. Softer than 90A struggles on a Bowden extruder. https://filamentfacts.com/answers/flex
- Print miniatures in PLA. Prusa names PLA for detailed models and figures, and the r/PrintedMinis threads about small models are about PLA and PLA+, not ABS or ASA. https://filamentfacts.com/answers/miniatures
- Print cosplay armor in PETG if it will be worn or travel in a car, use PLA for a shell that stays cool and will be sanded, and use TPU only for straps and joints. https://filamentfacts.com/answers/cosplay
- Do not pick a filament for food contact from the material name alone. Prusa says a PETG or PLA print still has layer grooves that hold bacteria, pigments that may not be reviewed, and a brass nozzle that is not food-safe, and this catalog lists no food-contact certification on the spools below. https://filamentfacts.com/answers/food-contact
- On a printer with no enclosure, use PLA or PETG. Prusa says ASA and ABS need a hotter ambient temperature or an enclosure because they warp, and a blank enclosure field on a printer page is not evidence that the machine is enclosed. https://filamentfacts.com/answers/open-printer
- Dry PETG, TPU, nylon, and PC. PLA tolerates room air and still prints better after drying. Community temperatures are PLA 45–55 °C, PETG 60–65 °C, TPU 50–55 °C, and nylon 70–80 °C, for 4–8 hours or longer, then store the spool with desiccant. https://filamentfacts.com/answers/drying
- Carbon-fiber and glass-fiber filaments are stiffer and usually matte, and they are not automatically stronger. They are abrasive, so print them with a hardened steel nozzle. Brass wears quickly. https://filamentfacts.com/answers/cf
- Watertightness is mostly walls, flow, and temperature, not a magic polymer. PETG is the usual community pick, ASA is the other rigid option, and a critical part still needs an epoxy coat. https://filamentfacts.com/answers/waterproof
- The AMS handles most rigid filaments. Keep ordinary TPU out, skip very brittle carbon-fiber grades, and do not run a bare cardboard spool. Use an adapter, respool, or a product sold for the AMS. https://filamentfacts.com/answers/ams
- Nylon is worth it when the part has to be tough and wear-resistant, and it is a poor choice if you will not keep it dry. Dry it, print from a dry box, prefer an enclosure, and expect about 250–280 °C. PA-CF is the easier community path. https://filamentfacts.com/answers/nylon
- High-speed PLA, on a hotend that can melt it, is what the community uses past 300 mm/s. Volumetric flow is the real limit. Overture High Speed PLA lists a print speed up to 300 mm/s. The other ranked spools still do not list a print speed, and none of them list volumetric flow. https://filamentfacts.com/answers/speed

## Printers

- The Bambu Lab A1 lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 100 °C, according to https://wiki.bambulab.com/en/a1/manual/faq. Checked 2026-10-14. https://filamentfacts.com/printer/bambu-lab-a1
- The Bambu Lab A1 mini lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 80 °C, according to https://bambulab.com/en/a1-mini/tech-specs. Checked 2026-10-14. https://filamentfacts.com/printer/bambu-lab-a1-mini
- The Bambu Lab P1P lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 100 °C, according to https://us.store.bambulab.com/products/p1s. Checked 2026-10-14. https://filamentfacts.com/printer/bambu-lab-p1p
- The Bambu Lab P1S lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 100 °C, according to https://wiki.bambulab.com/en/p1/manual/unboxing-p1s. Checked 2026-10-14. https://filamentfacts.com/printer/bambu-lab-p1s
- The Bambu Lab X1 Carbon lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 110 °C, according to https://public-cdn.bambulab.com/store/bambulab-X1-carbon-tech-specs.pdf. Checked 2026-10-14. https://filamentfacts.com/printer/bambu-lab-x1-carbon
- The Prusa MK4S lists a maximum nozzle temperature of 290 °C and lists a maximum bed temperature of 120 °C, according to https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/. Checked 2026-10-14. https://filamentfacts.com/printer/prusa-mk4s
- The Prusa CORE One+ lists a maximum nozzle temperature of 290 °C and lists a maximum bed temperature of 120 °C, according to https://www.prusa3d.com/product/prusa-core-one-kit/. Checked 2026-10-14. https://filamentfacts.com/printer/prusa-core-one-plus
- The Prusa XL lists a maximum nozzle temperature of 290 °C and lists a maximum bed temperature of 120 °C, according to https://www.prusa3d.com/product/original-prusa-mk4s-3d-printer-5/. Checked 2026-10-14. https://filamentfacts.com/printer/prusa-xl
- The Creality K1C lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 100 °C, according to https://www.creality.com/products/k1c-carbon-3d-printer. Checked 2026-10-14. https://filamentfacts.com/printer/creality-k1c
- The Elegoo Centauri Carbon lists a maximum nozzle temperature of 320 °C and does not list a maximum bed temperature, according to https://www.elegoo.com/products/centauri-carbon. Checked 2026-10-14. https://filamentfacts.com/printer/elegoo-centauri-carbon
- The Anycubic Kobra 3 Max lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 90 °C, according to https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-max/quick-start-guide. Checked 2026-10-14. https://filamentfacts.com/printer/anycubic-kobra-3-max
- The Qidi Q1 Pro lists a maximum nozzle temperature of 350 °C and does not list a maximum bed temperature, according to https://eu.qidi3d.com/products/q1-pro-3d-printer. Checked 2026-10-14. https://filamentfacts.com/printer/qidi-q1-pro
- The Sovol SV08 Max lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 100 °C, according to https://www.sovol3d.com/products/sovol-sv08-max-3d-printer. Checked 2026-10-14. https://filamentfacts.com/printer/sovol-sv08-max

## Filaments

- 123-3D 123-3D Filament PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/123_3d/materials/PLA/filaments/123_3d_filament_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/123-3d/123-3d-filament-pla
- 22 Network Glow PLA (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 22–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/22_network/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/22-network/glow-pla
- 22 Network Matte PLA (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 22–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/22_network/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/22-network/matte-pla
- 22 Network PLA (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 22–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/22_network/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/22-network/pla
- 22 Network Silk PLA (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 22–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/22_network/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/22-network/silk-pla
- 3D Fuel Dual-Color Silk PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/PLA/filaments/dual_color_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/dual-color-silk-pla-plus
- 3D Fuel Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/matte-pla
- 3D Fuel Pro ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/ABS/filaments/pro_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/pro-abs
- 3D Fuel Pro PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/PCTG/filaments/pro_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/pro-pctg
- 3D Fuel Pro PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/PETG/filaments/pro_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/pro-petg
- 3D Fuel Silk PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/silk-pla-plus
- 3D Fuel Standard PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/PLA/filaments/standard_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/standard-pla-plus
- 3D Fuel Tough Pro PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_fuel/materials/PLA/filaments/tough_pro_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-fuel/tough-pro-pla-plus
- 3D Prima Basic Recycle PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_prima_basic/materials/PLA/filaments/recycle_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-prima-basic/recycle-pla
- 3D Printing Canada Budget PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_printing_canada/materials/PETG/filaments/budget_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-printing-canada/budget-petg
- 3D Printing Canada Budget PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3d_printing_canada/materials/PLA/filaments/budget_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3d-printing-canada/budget-pla
- 3DE Pirate Black (ABS) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of minimum 80 °C and maximum 76 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3deksperten/materials/ABS/filaments/pirate_black/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3de/pirate-black
- 3DE Premium (PETG) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 40–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3deksperten/materials/PETG/filaments/solid_white/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3de/premium
- 3DE Premium (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 35–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3deksperten/materials/PLA/filaments/premium/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3de/premium-2
- 3DE Premium Silk (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 35–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3deksperten/materials/PLA/filaments/premium_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3de/premium-silk
- 3DEA ABS (ABS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/abs
- 3DEA ASA (ASA) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/asa
- 3DEA PA6-CF (PA/CF) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PA6/filaments/pa6_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pa6-cf
- 3DEA PC-CF (PC) has a recommended nozzle temperature of 245–270 °C and a recommended bed temperature of 110–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PC/filaments/pc_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pc-cf
- 3DEA PCTG-CF (PCTG) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PCTG/filaments/pctg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pctg-cf
- 3DEA PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 75–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/petg
- 3DEA PETG Translucent (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 75–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PETG/filaments/petg_translucent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/petg-translucent
- 3DEA PLA Basic (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pla-basic
- 3DEA PLA Marble (PLA) has a recommended nozzle temperature of 195–220 °C and a recommended bed temperature of 45–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PLA/filaments/pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pla-marble
- 3DEA PLA Matte (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pla-matte
- 3DEA PLA Silk (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pla-silk
- 3DEA PLA Translucent (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PLA/filaments/pla_translucent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pla-translucent
- 3DEA PLA Wood (PLA) has a recommended nozzle temperature of 195–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PLA/filaments/pla_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pla-wood
- 3DEA PLA+ (PLA+) has a recommended nozzle temperature of 195–230 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pla-plus
- 3DEA PMMA (PMMA) has a recommended nozzle temperature of 210–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PMMA/filaments/pmma/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pmma
- 3DEA POM (POM) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 110–130 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/POM/filaments/pom/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pom
- 3DEA PP (PP) has a recommended nozzle temperature of 225–250 °C and a recommended bed temperature of 75–85 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/pp
- 3DEA TPE 80A (TPE) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/TPE/filaments/tpe_80a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/tpe-80a
- 3DEA TPE 85A (TPE) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/TPE/filaments/tpe_85a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/tpe-85a
- 3DEA TPE 92A (TPE) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/TPE/filaments/tpe_92a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/tpe-92a
- 3DEA TPU 95A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/tpu-95a
- 3DEA TPU 95A CF (TPU) has a recommended nozzle temperature of 215–250 °C and a recommended bed temperature of 50–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/TPU/filaments/tpu_95a_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/tpu-95a-cf
- 3DEA TPU 98A (TPU) has a recommended nozzle temperature of 210–235 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dea/materials/TPU/filaments/tpu_98a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dea/tpu-98a
- 3DFOX PLA REFILL (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dfox/materials/PLA/filaments/pla_refill/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dfox/pla-refill
- 3DHoJor PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dhojor/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dhojor/pla
- 3DHoJor PLA Matte (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dhojor/materials/PLA/filaments/light_khaki/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dhojor/pla-matte
- 3DHoJor Silk (PLA) has a recommended nozzle temperature of 210–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dhojor/materials/PLA/filaments/silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dhojor/silk
- 3DJAKE ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/abs
- 3DJAKE ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/asa
- 3DJAKE Easy Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PETG/filaments/easy_matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/easy-matte-petg
- 3DJAKE easy PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PETG/filaments/easy_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/easy-petg
- 3DJAKE eco Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/eco_glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/eco-glow-pla
- 3DJAKE eco Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/eco_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/eco-matte-pla
- 3DJAKE eco PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/eco_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/eco-pla
- 3DJAKE eco Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/eco_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/eco-silk-pla
- 3DJAKE Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/glow-petg
- 3DJAKE Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/glow-pla
- 3DJAKE magic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/magic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/magic-pla
- 3DJAKE Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/matte-pla
- 3DJAKE mystery PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/mystery_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/mystery-pla
- 3DJAKE PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/pctg
- 3DJAKE PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/petg
- 3DJAKE PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/pla
- 3DJAKE Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/silk-pla
- 3DJAKE TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/tpu
- 3DJAKE TPU A95 (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3djake/materials/TPU/filaments/a95/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3djake/tpu-a95
- 3DO ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3do/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3do/asa
- 3DO PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3do/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3do/petg
- 3DO PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3do/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3do/pla
- 3DPower ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/abs
- 3DPower ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/asa
- 3DPower Basic PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PETG/filaments/basic_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/basic-petg
- 3DPower Basic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/basic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/basic-pla
- 3DPower Dual Color Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/dual_color_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/dual-color-silk-pla
- 3DPower Elasti 90A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/TPU/filaments/elasti_90a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/elasti-90a-tpu
- 3DPower HT 150 PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/ht_150_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/ht-150-pla
- 3DPower Hyper PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PA6/filaments/hyper_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/hyper-pa6
- 3DPower Hyper Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PETG/filaments/hyper_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/hyper-speed-petg
- 3DPower Hyper Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/hyper_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/hyper-speed-pla
- 3DPower Marble PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/marble-pla
- 3DPower Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/matte-pla
- 3DPower PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/pa6
- 3DPower Pastel PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/pastel_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/pastel-pla
- 3DPower PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/petg
- 3DPower PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/pla
- 3DPower Select PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PETG/filaments/select_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/select-petg
- 3DPower Select PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dpower/materials/PLA/filaments/select_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dpower/select-pla
- 3DXTech ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/abs
- 3DXTech ABS 3DXMax (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ABS/filaments/3dxmax/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/abs-3dxmax
- 3DXTech ABS 3DXStat ESD (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ABS/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/abs-3dxstat-esd
- 3DXTech ABS 3DXTech (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ABS/filaments/3dxtech/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/abs-3dxtech
- 3DXTech ABS CF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ABS/filaments/cf_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/abs-cf
- 3DXTech ABS GF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ABS/filaments/gf_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/abs-gf
- 3DXTech ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/asa
- 3DXTech ASA 3DXMax (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ASA/filaments/3dxmax/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/asa-3dxmax
- 3DXTech ASA CF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/ASA/filaments/cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/asa-cf
- 3DXTech Carbonx CF PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PC/filaments/carbonx_cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/carbonx-cf-pc
- 3DXTech EcoMax PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PLA/filaments/ecomax_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/ecomax-pla
- 3DXTech Economy PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PLA/filaments/economy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/economy-pla
- 3DXTech Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/glow-pla
- 3DXTech HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/hips
- 3DXTech HIPS 3DXMax (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/HIPS/filaments/3dxmax/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/hips-3dxmax
- 3DXTech Max G PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PCTG/filaments/max_g_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/max-g-pctg
- 3DXTech PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA12/filaments/pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pa12
- 3DXTech PA12 3DXStat ESD (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA12/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pa12-3dxstat-esd
- 3DXTech PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pa12-cf
- 3DXTech PA12 GF (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA12/filaments/gf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pa12-gf
- 3DXTech PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pa6
- 3DXTech PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pa6-cf
- 3DXTech PA6 GF (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA6/filaments/gf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pa6-gf
- 3DXTech PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pc
- 3DXTech PC 3DXMax (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PC/filaments/3dxmax/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pc-3dxmax
- 3DXTech PC 3DXStat ESD (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PC/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pc-3dxstat-esd
- 3DXTech PEEK (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEEK/filaments/peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/peek
- 3DXTech PEEK CF (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEEK/filaments/cf_peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/peek-cf
- 3DXTech PEEK GF (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEEK/filaments/gf_peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/peek-gf
- 3DXTech PEI 3DXStat ESD (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEI/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pei-3dxstat-esd
- 3DXTech PEI CF (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEI/filaments/cf_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pei-cf
- 3DXTech PEI GF (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEI/filaments/gf_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pei-gf
- 3DXTech PEKK (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEKK/filaments/pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pekk
- 3DXTech PEKK 3DXStat ESD (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEKK/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pekk-3dxstat-esd
- 3DXTech PEKK CF (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEKK/filaments/cf_pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pekk-cf
- 3DXTech PES (PES) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PES/filaments/pes/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pes
- 3DXTech PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/petg
- 3DXTech PETG 3DXStat EMI (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PETG/filaments/3dxstat_emi/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/petg-3dxstat-emi
- 3DXTech PETG 3DXStat ESD (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PETG/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/petg-3dxstat-esd
- 3DXTech PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/petg-cf
- 3DXTech PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pla
- 3DXTech PLA 3DXStat ESD (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PLA/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pla-3dxstat-esd
- 3DXTech PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pla-cf
- 3DXTech PP (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pp
- 3DXTech PP CF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PP/filaments/cf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pp-cf
- 3DXTech PP GF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PP/filaments/gf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pp-gf
- 3DXTech PPA GF (PPA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PPA/filaments/gf_ppa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/ppa-gf
- 3DXTech PPE (PPE) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PPE/filaments/ppe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/ppe
- 3DXTech PPS (PPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PPS/filaments/pps/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pps
- 3DXTech PPSU (PPSU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PPSU/filaments/ppsu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/ppsu
- 3DXTech PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pva
- 3DXTech PVDF (PVDF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PVDF/filaments/pvdf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/pvdf
- 3DXTech Thermax PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PEI/filaments/thermax_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/thermax-pei
- 3DXTech Thermax Psu (PSU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PSU/filaments/thermax_psu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/thermax-psu
- 3DXTech TPI (TPI) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/TPI/filaments/tpi/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/tpi
- 3DXTech TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/tpu
- 3DXTech TPU 3DXFlex (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/TPU/filaments/3dxflex/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/tpu-3dxflex
- 3DXTech TPU 3DXFlex GF30 (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/TPU/filaments/3dxflex_gf30/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/tpu-3dxflex-gf30
- 3DXTech TPU 3DXStat ESD (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/TPU/filaments/3dxstat_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/tpu-3dxstat-esd
- 3DXTech TPU GF (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/TPU/filaments/gf_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/tpu-gf
- 3DXTech Wearx Wear Resistant Nylon Filament PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/3dxtech/materials/PA6/filaments/wearx_wear_resistant_nylon_filament_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/3dxtech/wearx-wear-resistant-nylon-filament-pa6
- 4D-Lab PLA+ Plus (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 60–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/4d_lab/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/4d-lab/pla-plus-plus
- Aceaddity Flash PLA+ (High Speed 600mm/s) (PLA+) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aceaddity/materials/PLA/filaments/flash_pla_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aceaddity/flash-pla-plus-high-speed-600mm-s
- Aceaddity Marble PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aceaddity/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aceaddity/marble-pla
- Aceaddity Matte PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aceaddity/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aceaddity/matte-pla
- Aceaddity PLA+ (PLA+) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aceaddity/materials/PLA/filaments/pla_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aceaddity/pla-plus
- Aceaddity Silk Magic PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aceaddity/materials/PLA/filaments/silk_magic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aceaddity/silk-magic-pla
- Aceaddity Wood PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aceaddity/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aceaddity/wood-pla
- Add-North ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/abs
- Add-North E PLA (PLA) has a recommended nozzle temperature of 215 °C and a recommended bed temperature of 60 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/e-pla
- Add-North ESD PETG (PETG) has a recommended nozzle temperature of 260 °C and a recommended bed temperature of 80 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/esd-petg
- Add-North Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/glow-pla
- Add-North High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/high-speed-pla
- Add-North HT-PLA Pro Matte (PLA) has a recommended nozzle temperature of 220 °C and a recommended bed temperature of 70 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/ht-pla-pro-matte
- Add-North Matte High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/matte_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/matte-high-speed-pla
- Add-North Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PETG/filaments/matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/matte-petg
- Add-North Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/matte-pla
- Add-North Matte TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/TPU/filaments/matte_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/matte-tpu
- Add-North PA12 Addbor N25 (PA12) has a recommended nozzle temperature of 255–275 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PA12/filaments/addbor_n25/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/add-north/pa12-addbor-n25
- Add-North PA12 Addlantis (PA12) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PA12/filaments/addlantis/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pa12-addlantis
- Add-North PA12 Adura (PA12) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PA12/filaments/adura/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://storage.googleapis.com/addnorth-com.appspot.com/imgix/assets/production/Adura_TDS_KRM71m.pdf. https://filamentfacts.com/brand/add-north/pa12-adura
- Add-North PA12 Adura FDA (PA12) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PA12/filaments/adura_fda/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://storage.googleapis.com/addnorth-com.appspot.com/imgix/assets/production/adura_fda_tds_krynwK.pdf. https://filamentfacts.com/brand/add-north/pa12-adura-fda
- Add-North PA12 Adura X (PA12) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PA12/filaments/adura_x/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://storage.googleapis.com/addnorth-com.appspot.com/imgix/assets/production/AduraX_TDS_mZ8KLl.pdf. https://filamentfacts.com/brand/add-north/pa12-adura-x
- Add-North PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pa6
- Add-North PC Blend HT LCF (PC) has a recommended nozzle temperature of 280 °C and a recommended bed temperature of 110 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/pc-blend-ht-lcf
- Add-North PC CF (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PC/filaments/cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pc-cf
- Add-North PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/petg
- Add-North PETG Economy (PETG) has a recommended nozzle temperature of 245 °C and a recommended bed temperature of 70 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/petg-economy
- Add-North PETG Flame Retardant V0 (PETG) has a recommended nozzle temperature of 245 °C and a recommended bed temperature of 70 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/petg-flame-retardant-v0
- Add-North PETG Koltron G1 (PETG) has a recommended nozzle temperature of 280–295 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PETG/filaments/koltron_g1/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/add-north/petg-koltron-g1
- Add-North PETG PRO Matte (PETG) has a recommended nozzle temperature of 245 °C and a recommended bed temperature of 70 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/petg-pro-matte
- Add-North PETG Rigid X (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PETG/filaments/rigid_x/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://storage.googleapis.com/addnorth-com.appspot.com/imgix/assets/production/TDS_rigidX_10waLr.pdf. https://filamentfacts.com/brand/add-north/petg-rigid-x
- Add-North PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pla
- Add-North PLA CF (PLA) has a recommended nozzle temperature of 200 °C and a recommended bed temperature of 60 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/pla-cf
- Add-North PLA Economy (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/pla_economy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pla-economy
- Add-North PLA Matte Textura (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/matte_textura/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://storage.googleapis.com/addnorth-com.appspot.com/imgix/assets/production/Textura_TDS_aqYE3N.pdf. https://filamentfacts.com/brand/add-north/pla-matte-textura
- Add-North PLA Premium Silk (PLA) has a recommended nozzle temperature of 230 °C and a recommended bed temperature of 60 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/pla-premium-silk
- Add-North PLA Textura Flare (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/textura_flare/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pla-textura-flare
- Add-North PLA Wood (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/pla_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pla-wood
- Add-North PVDF (PVDF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PVDF/filaments/pvdf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/pvdf
- Add-North PVDF Adamant S1 (PVDF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PVDF/filaments/adamant_s1/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://storage.googleapis.com/addnorth-com.appspot.com/imgix/assets/production/AdamantS1_TDS_nH7jU9.pdf. https://filamentfacts.com/brand/add-north/pvdf-adamant-s1
- Add-North rABS (ABS) has a recommended nozzle temperature of 245 °C and a recommended bed temperature of 105 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/rabs
- Add-North rPETG Matte (PETG) has a recommended nozzle temperature of 245 °C and a recommended bed temperature of 70 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/rpetg-matte
- Add-North rPLA RE-ADD (PLA) has a recommended nozzle temperature of 215 °C and a recommended bed temperature of 60 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/rpla-re-add
- Add-North Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/silk-pla
- Add-North TPU EasyFlex (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/TPU/filaments/easyflex/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/add-north/tpu-easyflex
- Add-North TPU Pro Matte 85A (TPU) has a recommended nozzle temperature of 230–250 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/TPU/filaments/tpu_pro_matte_85a/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/add-north/tpu-pro-matte-85a
- Add-North TPU Pro Matte 95A (TPU) has a recommended nozzle temperature of 230–250 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/add_north/materials/TPU/filaments/tpu_pro_matte_95a/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/add-north/tpu-pro-matte-95a
- Add-North X-PLA (PLA) has a recommended nozzle temperature of 200 °C and a recommended bed temperature of 60 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/x-pla
- Add-North X-PLA High Speed (PLA) has a recommended nozzle temperature of 200 °C and a recommended bed temperature of 60 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/addnorth.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/add-north/x-pla-high-speed
- Alzament ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/161246. https://filamentfacts.com/brand/alzament/abs
- Alzament ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/161245. https://filamentfacts.com/brand/alzament/asa
- Alzament Hyper PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PLA/filaments/hyper_pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/alzament/hyper-pla-plus
- Alzament PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/alzament/petg
- Alzament PETG Hyper (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PETG/filaments/petg_hyper/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/149499. https://filamentfacts.com/brand/alzament/petg-hyper
- Alzament PETG-CF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/161247. https://filamentfacts.com/brand/alzament/petg-cf
- Alzament PLA Basic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/alzament/pla-basic
- Alzament PLA Chameleon (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PLA/filaments/pla_chameleon/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/149500. https://filamentfacts.com/brand/alzament/pla-chameleon
- Alzament PLA Matte (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/alzament/pla-matte
- Alzament PLA Silk (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/alzament/pla-silk
- Alzament PLA-CF (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/161248. https://filamentfacts.com/brand/alzament/pla-cf
- Alzament PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/148632. https://filamentfacts.com/brand/alzament/pla-plus
- Alzament TPU 95A (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/alzament/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://dwn.alza.cz/manual/161249. https://filamentfacts.com/brand/alzament/tpu-95a
- AmazonBasics Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amazonbasics/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amazonbasics/silk-pla
- Ambrosia ABS Matte (ABS) has a recommended nozzle temperature of 230–265 °C and a recommended bed temperature of 75–115 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/ABS/filaments/matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/abs-matte
- Ambrosia ASA (ASA) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 100–115 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/ASA/filaments/standard/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/asa
- Ambrosia ASA Dolos Color Shifting (ASA) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 100–115 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/ASA/filaments/dolos/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/asa-dolos-color-shifting
- Ambrosia ASA Galactic (ASA) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 100–115 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/ASA/filaments/galactic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/asa-galactic
- Ambrosia ASA-CF (ASA) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/ASA/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/asa-cf
- Ambrosia ASA-GF (ASA) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/ASA/filaments/gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/asa-gf
- Ambrosia PC-ABS (PC) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 100–115 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PC/filaments/pc_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/pc-abs
- Ambrosia PC-CF (PC) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 100–115 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PC/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/pc-cf
- Ambrosia PETG (PETG) has a recommended nozzle temperature of 225–260 °C and a recommended bed temperature of 65–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PETG/filaments/standard/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/petg
- Ambrosia PHA (PHA) has a recommended nozzle temperature of 185–205 °C and a recommended bed temperature of 0 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PHA/filaments/standard/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/pha
- Ambrosia PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/pla
- Ambrosia PLA Dolos Color Shifting (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PLA/filaments/dolos/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/pla-dolos-color-shifting
- Ambrosia PLA Galactic (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PLA/filaments/galactic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/pla-galactic
- Ambrosia PLA Silk (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/PLA/filaments/silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/pla-silk
- Ambrosia TPU (TPU) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/TPU/filaments/standard/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/tpu
- Ambrosia Über ABS (ABS) has a recommended nozzle temperature of 225–250 °C and a recommended bed temperature of 75–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ambrosia/materials/ABS/filaments/uber/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ambrosia/ber-abs
- AmeLeis PLA (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ameleis/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ameleis/pla
- American Filament Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/american_filament/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/american-filament/matte-pla
- American Filament PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/american_filament/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/american-filament/pctg
- American Filament PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/american_filament/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/american-filament/pla
- American Filament Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/american_filament/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/american-filament/silk-pla
- Amolen 90A Flexible PEBA (PEBA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PEBA/filaments/90a_flexible_peba/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/90a-flexible-peba
- Amolen Basic Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/basic_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/basic-matte-pla
- Amolen Basic Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/basic_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/basic-silk-pla
- Amolen Conductive PLA (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/conductive_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/conductive-pla
- Amolen Crystal Transparent PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/crystal_transparent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/crystal-transparent-pla
- Amolen Dual Color Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/dual_color_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/dual-color-matte-pla
- Amolen Dual Color Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/dual_color_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/dual-color-silk-pla
- Amolen Galaxy Sparkle Shiny Galaxy Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/pla_silk_galaxy_sparkle_shiny/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Amolen Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/glow-pla
- Amolen Glow TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/TPU/filaments/glow_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/glow-tpu
- Amolen High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/high-speed-pla
- Amolen Marble PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/marble-pla
- Amolen Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/matte-pla
- Amolen PEBA (PEBA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PEBA/filaments/peba/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/peba
- Amolen PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/petg
- Amolen PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/pla
- Amolen PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/pla-cf
- Amolen PLA Metal (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/pla_metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/pla-metal
- Amolen Quad Color Silk PLA (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/quad_color_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/quad-color-silk-pla
- Amolen Rainbow Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/rainbow_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/rainbow-silk-pla
- Amolen S-Series Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/s_series_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/s-series-silk-pla
- Amolen Shiny Glitter Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/shiny_glitter_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/shiny-glitter-silk-pla
- Amolen Shiny Gradient Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/shiny_gradient_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/shiny-gradient-silk-pla
- Amolen Silk GF PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/silk_gf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/silk-gf-pla
- Amolen Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/silk-pla
- Amolen Temperature Color Change PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/temperature_color_change_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/temperature-color-change-pla
- Amolen TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/tpu
- Amolen Transparent PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/transparent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/transparent-pla
- Amolen Triple Color Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/triple_color_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/triple-color-matte-pla
- Amolen Triple Color Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/triple_color_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/triple-color-silk-pla
- Amolen UV Color Change PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/uv_color_change_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/uv-color-change-pla
- Amolen Wood PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/amolen/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/amolen/wood-pla
- Anycubic ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_ABS_V3.0.pdf?v=1757562279. https://filamentfacts.com/brand/anycubic/abs
- Anycubic ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0245/5519/2380/files/ANYCUBIC_TDS_ASA_V3.0.pdf?v=1758535865. https://filamentfacts.com/brand/anycubic/asa
- Anycubic High-Speed PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PLA_HS_V3.0.pdf?v=1757558773. https://filamentfacts.com/brand/anycubic/high-speed-pla
- Anycubic PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0698/1235/5357/files/ANYCUBIC_TDS_PETG_V3.0.pdf?v=1757584046. https://filamentfacts.com/brand/anycubic/petg
- Anycubic PLA Basic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 55–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/anycubic/pla-basic
- Anycubic PLA Galaxy (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/anycubic/pla-galaxy
- Anycubic PLA Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/anycubic/pla-marble
- Anycubic PLA Matte (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PLA_Matte_V3.0.pdf?v=1757562867. https://filamentfacts.com/brand/anycubic/pla-matte
- Anycubic PLA Metal (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/anycubic/pla-metal
- Anycubic PLA Plus (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_plus/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0698/1235/5357/files/ANYCUBIC_TDS_PLA__V3.0.pdf?v=1757589534. https://filamentfacts.com/brand/anycubic/pla-plus
- Anycubic PLA Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PETG_V3.0.pdf?v=1757557068. https://filamentfacts.com/brand/anycubic/pla-silk
- Anycubic PLA Silk Dual-Tricolor (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_silk_dual_tricolor/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PLA_silk_V3.0.pdf?v=1757561075. https://filamentfacts.com/brand/anycubic/pla-silk-dual-tricolor
- Anycubic PLA Special (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PLA/filaments/pla_special/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PLA_V3.0_d5a11606-9321-44e9-b3a0-270fcf13fc35.pdf?v=1757560320. https://filamentfacts.com/brand/anycubic/pla-special
- Anycubic TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_TPU_V3.0.pdf?v=1757560611. https://filamentfacts.com/brand/anycubic/tpu
- Anycubic Translucent PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/anycubic/materials/PETG/filaments/translucent_petg/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0698/1235/5357/files/ANYCUBIC_TDS_PETG_V3.0.pdf?v=1757584046. https://filamentfacts.com/brand/anycubic/translucent-petg
- Arianeplast Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/arianeplast/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/arianeplast/glow-pla
- Arianeplast PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/arianeplast/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/arianeplast/pla
- Arianeplast PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/arianeplast/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/arianeplast/pla-cf
- Arianeplast Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/arianeplast/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/arianeplast/silk-pla
- Artillery Artillery Basic PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/artillery/materials/PLA/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/artillery/artillery-basic-pla
- ATARAXIA ART Flexible 89A PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ataraxia_art/materials/PLA/filaments/flexible_89a_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ataraxia-art/flexible-89a-pla
- ATARAXIA ART High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ataraxia_art/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ataraxia-art/high-speed-pla
- ATARAXIA ART Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ataraxia_art/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ataraxia-art/matte-pla
- ATARAXIA ART PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ataraxia_art/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ataraxia-art/petg
- ATARAXIA ART PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ataraxia_art/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ataraxia-art/pla
- ATARAXIA ART Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ataraxia_art/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ataraxia-art/silk-pla
- Atomic Filament ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/abs
- Atomic Filament ABS CF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/ABS/filaments/cf_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/abs-cf
- Atomic Filament ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/asa
- Atomic Filament ASA CF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/ASA/filaments/cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/asa-cf
- Atomic Filament PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/petg
- Atomic Filament PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/petg-cf
- Atomic Filament PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/pla
- Atomic Filament PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/pla-cf
- Atomic Filament Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/atomic-filament/silk-pla
- AURAPOL ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/abs
- AURAPOL ARMY PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/PETG/filaments/army_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/army-petg
- AURAPOL ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/asa
- AURAPOL L-EGO PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/PLA/filaments/l_ego_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/l-ego-pla
- AURAPOL Metallic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/PLA/filaments/metallic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/metallic-pla
- AURAPOL PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/petg
- AURAPOL PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/pla
- AURAPOL PLA HT110 (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/PLA/filaments/ht110/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/pla-ht110
- AURAPOL Wood PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/aurapol/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/aurapol/wood-pla
- AzureFilm ABS Plus (ABS) has a recommended nozzle temperature of 250 °C and a recommended bed temperature of 110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/ABS/filaments/plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/abs-plus
- AzureFilm ABS Prime (ABS) has a recommended nozzle temperature of 250 °C and a recommended bed temperature of 90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/ABS/filaments/prime/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/abs-prime
- AzureFilm ASA Original (ASA) has a recommended nozzle temperature of 250 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/ASA/filaments/original/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/asa-original
- AzureFilm ASA Prime (ASA) has a recommended nozzle temperature of 245 °C and a recommended bed temperature of 90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/ASA/filaments/prime/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/asa-prime
- AzureFilm Carbonfiber PET (PET) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PET/filaments/carbonfiber_pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/carbonfiber-pet
- AzureFilm Glitter PLA (PLA) has a recommended nozzle temperature of 225 °C and a recommended bed temperature of 55 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PLA/filaments/glitter_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/glitter-pla
- AzureFilm Matte HS PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PLA/filaments/pla_matte_hs/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://azurefilm.com/technical-data-sheets/. https://filamentfacts.com/brand/azurefilm/matte-hs-pla
- AzureFilm PA6 Carbonfiber nylon (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PA6/filaments/carbonfiber_nylon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/pa6-carbonfiber-nylon
- AzureFilm PC-ABS (PC) has a recommended nozzle temperature of 270 °C and a recommended bed temperature of 110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PC/filaments/pc_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/pc-abs
- AzureFilm PCTG (PCTG) has a recommended nozzle temperature of 250 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/pctg
- AzureFilm PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/petg
- AzureFilm PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/pla
- AzureFilm PLA Original (PLA) has a recommended nozzle temperature of 195–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PLA/filaments/pla_original/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/pla-original
- AzureFilm PLA Prime (PLA) has a recommended nozzle temperature of 230 °C and a recommended bed temperature of 60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PLA/filaments/prime_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/pla-prime
- AzureFilm Silk PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/silk-pla
- AzureFilm TPU 85A (TPU) has a recommended nozzle temperature of 230 °C and a recommended bed temperature of 60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/TPU/filaments/tpu_85a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/tpu-85a
- AzureFilm TPU/TPE (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/TPU/filaments/tpu_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/tpu-tpe
- AzureFilm Wood PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/azurefilm/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/azurefilm/wood-pla
- Bambu Lab ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/abs
- Bambu Lab ABS-GF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/ABS/filaments/abs_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/abs-gf
- Bambu Lab ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/asa
- Bambu Lab ASA Aero (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/ASA/filaments/aero/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_ASA_Aero_Technical_Data_Sheet.pdf?v=1712823163. https://filamentfacts.com/brand/bambu-lab/asa-aero
- Bambu Lab ASA-CF (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/ASA/filaments/asa_cf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_ASA-CF_Technical_Data_Sheet.pdf?v=1726741601. https://filamentfacts.com/brand/bambu-lab/asa-cf
- Bambu Lab Matte ASA CF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/ASA/filaments/asa_matte_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/matte-asa-cf
- Bambu Lab PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pa12-cf
- Bambu Lab PA6-CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PA6/filaments/pa6_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pa6-cf
- Bambu Lab PA6-GF (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PA6/filaments/pa6_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pa6-gf
- Bambu Lab PAHT-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PA6/filaments/paht_cf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PAHT-CF_Technical_Data_Sheet_V2.pdf. https://filamentfacts.com/brand/bambu-lab/paht-cf
- Bambu Lab PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pc
- Bambu Lab PC FR (PC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PC/filaments/pc_fr/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PC_FR_Technical_Data_Sheet.pdf?v=1734509576. https://filamentfacts.com/brand/bambu-lab/pc-fr
- Bambu Lab PET-CF (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PET/filaments/pet_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pet-cf
- Bambu Lab PETG Basic (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PETG/filaments/petg_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/petg-basic
- Bambu Lab PETG HF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PETG/filaments/hf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://store.bblcdn.com/ce12d65176a94f1086e6aefa238e62e2.pdf. https://filamentfacts.com/brand/bambu-lab/petg-hf
- Bambu Lab PETG Matte (PETG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 65–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PETG/filaments/petg_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/petg-matte
- Bambu Lab PETG Translucent (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PETG/filaments/translucent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/petg-translucent
- Bambu Lab PETG-CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/petg-cf
- Bambu Lab PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pla
- Bambu Lab PLA Aero (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/aero/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_PLA_Aero_Technical_Data_Sheet.pdf?v=1715335547. https://filamentfacts.com/brand/bambu-lab/pla-aero
- Bambu Lab PLA Basic (PLA) lists a nozzle temperature of 190–230 °C, a bed temperature of 35–45 °C, drying in a blast oven at 50 °C for 8 h, and a print speed under 300 mm/s, according to Bambu Filament Technical Data Sheet V3.0 (https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943, checked 2026-10-14). The US store page (https://us.store.bambulab.com/products/pla-basic-filament) does not list those temperatures. It does say the filament is AMS compatible and that parameters are stored in RFID. The Open Filament Database left nozzle and bed empty (dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pla-basic
- Bambu Lab PLA Basic Gradient (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/basic_gradient/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Gradient_Technical_Data_Sheet.pdf. https://filamentfacts.com/brand/bambu-lab/pla-basic-gradient
- Bambu Lab PLA Galaxy (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/galaxy/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Galaxy_Technical_Data_Sheet.pdf?v=1709278402. https://filamentfacts.com/brand/bambu-lab/pla-galaxy
- Bambu Lab PLA Glow (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pla-glow
- Bambu Lab PLA Lite (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/pla_lite/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://www.bigdipper.com.ar/File/hojas-de-datos/BL-A18-D0-1.75-1000-SPL.pdf. https://filamentfacts.com/brand/bambu-lab/pla-lite
- Bambu Lab PLA Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/marble/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_PLA_Marble_Technical_Data_Sheet.pdf. https://filamentfacts.com/brand/bambu-lab/pla-marble
- Bambu Lab PLA Matte (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pla-matte
- Bambu Lab PLA Metal (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/metal/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_PLA_Metal_Technical_Data_Sheet.pdf?v=1695182427. https://filamentfacts.com/brand/bambu-lab/pla-metal
- Bambu Lab PLA Pure (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/pla_pure/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pla-pure
- Bambu Lab PLA Silk Dual Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/silk_dual_color/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Silk_Dual_Color_Technical_Data_Sheet.pdf?v=1709276099. https://filamentfacts.com/brand/bambu-lab/pla-silk-dual-color
- Bambu Lab PLA Silk Multi-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/pla_silk_multi_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pla-silk-multi-color
- Bambu Lab PLA Silk+ (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/silk+/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Silk__Technical_Data_Sheet.pdf?v=1733472353. https://filamentfacts.com/brand/bambu-lab/pla-silk-plus
- Bambu Lab PLA Sparkle (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/sparkle/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopifycdn.net/s/files/1/0584/7236/6216/files/Bambu_PLA_Sparkle-Technical_Data_Sheet.pdf. https://filamentfacts.com/brand/bambu-lab/pla-sparkle
- Bambu Lab PLA Tough+ (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/tough+/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://store.bblcdn.eu/s8/default/f0d6e1c73b9e42c3abeb9540f3433225/new_Bambu_PLA_Tough_Technical_Data_Sheet.pdf. https://filamentfacts.com/brand/bambu-lab/pla-tough-plus
- Bambu Lab PLA Translucent (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/translucent/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://store.bblcdn.com/s7/default/729a8bf233e9474db25c8d5be1e64a00/Bambu_PLA_Translucent_Technical_Data_Sheet.pdf. https://filamentfacts.com/brand/bambu-lab/pla-translucent
- Bambu Lab PLA Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/wood/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_PLA_Wood_Technical_Data_Sheet.pdf?v=1731406725. https://filamentfacts.com/brand/bambu-lab/pla-wood
- Bambu Lab PLA-CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pla-cf
- Bambu Lab PPA-CF (PPA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PPA/filaments/ppa_cf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_PPA-CF_Technical_Data_Sheet_2ab26420-79f5-4692-888e-090006814050.pdf?v=1724815044. https://filamentfacts.com/brand/bambu-lab/ppa-cf
- Bambu Lab PPS-CF (PPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PPS/filaments/pps_cf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_PPS-CF_Technical_Data_Sheet.pdf?v=1724381950. https://filamentfacts.com/brand/bambu-lab/pps-cf
- Bambu Lab PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/pva
- Bambu Lab Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/silk-pla
- Bambu Lab Support for ABS (PVA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PVA/filaments/for_abs/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_Support_for_ABS_Technical_Data_Sheet.pdf?v=1721786140. https://filamentfacts.com/brand/bambu-lab/support-for-abs
- Bambu Lab Support for PA/PET (PVA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PVA/filaments/for_pa_pet/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopifycdn.net/s/files/1/0584/7236/6216/files/Bambu_Support_for_PA_and_PET_Technical_Data_Sheet.pdf. https://filamentfacts.com/brand/bambu-lab/support-for-pa-pet
- Bambu Lab Support for PLA (PVA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PVA/filaments/for_pla/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://store.bblcdn.com/s2/default/200ef29f5cd04b20ba6c2c86f0cc3ec0/Bambus_Support_for_PLA_Technical_Data_Sheet.pdf. https://filamentfacts.com/brand/bambu-lab/support-for-pla
- Bambu Lab Support for PLA/PETG (PVA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/PVA/filaments/for_pla_petg/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_Support_for_PLA_PETG_Technical_Data_Sheet.pdf?v=1721103305. https://filamentfacts.com/brand/bambu-lab/support-for-pla-petg
- Bambu Lab TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/tpu
- Bambu Lab TPU 85A (TPU) has a recommended nozzle temperature of 200–250 °C and a recommended bed temperature of 30–35 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/TPU/filaments/85a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/tpu-85a
- Bambu Lab TPU 90A (TPU) has a recommended nozzle temperature of 200–250 °C and a recommended bed temperature of 30–35 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/TPU/filaments/90a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/bambu-lab/tpu-90a
- Bambu Lab TPU 95A HF (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/TPU/filaments/95a_hf/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_TPU_95A_HF_Technical_Data_Sheet.pdf?v=1700101819. https://filamentfacts.com/brand/bambu-lab/tpu-95a-hf
- Bambu Lab TPU for AMS (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/bambu_lab/materials/TPU/filaments/for_ams/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_TPU_for_AMS_Technical_Data_Sheet.pdf?v=1730944629. https://filamentfacts.com/brand/bambu-lab/tpu-for-ams
- BIQU PLA GO (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 55–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/biqu/materials/PLA/filaments/pla_go_blue/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/biqu/pla-go
- Buddy3D ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/buddy3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/buddy3d/abs
- Buddy3D ASA (ASA) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/buddy3d/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/buddy3d/asa
- Buddy3D Glow PLA (PLA) has a recommended nozzle temperature of 205–225 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/buddy3d/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/buddy3d/glow-pla
- Buddy3D Matte ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/buddy3d/materials/ABS/filaments/matte_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/buddy3d/matte-abs
- Buddy3D PETG (PETG) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/buddy3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/buddy3d/petg
- Buddy3D PLA (PLA) has a recommended nozzle temperature of 205–225 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/buddy3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/buddy3d/pla
- Buddy3D Silk PLA (PLA) has a recommended nozzle temperature of 205–225 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/buddy3d/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/buddy3d/silk-pla
- CC3D ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/abs
- CC3D Dual Color Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PLA/filaments/dual_color_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/dual-color-matte-pla
- CC3D Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/glow-petg
- CC3D Matte HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/HIPS/filaments/matte_hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/matte-hips
- CC3D PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/pc
- CC3D PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/petg
- CC3D PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/petg-cf
- CC3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/pla
- CC3D PLA Max (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PLA/filaments/max/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/pla-max
- CC3D Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/silk-pla
- CC3D Silk TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/TPU/filaments/silk_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/silk-tpu
- CC3D TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cc3d/materials/TPE/filaments/tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cc3d/tpe
- CHCKX PETG (PETG) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/chckx/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/chckx/petg
- COEX 3D ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/abs
- COEX 3D ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/asa
- COEX 3D Coexflex 30D TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/TPE/filaments/coexflex_30d_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/coexflex-30d-tpe
- COEX 3D Coexflex 40D TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/TPE/filaments/coexflex_40d_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/coexflex-40d-tpe
- COEX 3D Coexflex 60A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/TPU/filaments/coexflex_60a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/coexflex-60a-tpu
- COEX 3D Coexflex 60D TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/TPE/filaments/coexflex_60d_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/coexflex-60d-tpe
- COEX 3D Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/glow-pla
- COEX 3D Hytrel 3D4000FL TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/TPU/filaments/hytrel_3d4000fl_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/hytrel-3d4000fl-tpu
- COEX 3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/pla
- COEX 3D PLA VO3D High Impact (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/PLA/filaments/vo3d_high_impact/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/pla-vo3d-high-impact
- COEX 3D Silk ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/ASA/filaments/silk_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/silk-asa
- COEX 3D Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/silk-pla
- COEX 3D TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/TPE/filaments/tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/tpe
- COEX 3D TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/coex_3d/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/coex-3d/tpu
- colorFabb ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/asa
- colorFabb CPE (CPE) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/CPE/filaments/cpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/cpe
- colorFabb Economy PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/economy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/economy-pla
- colorFabb Glow PHA (PHA) has a recommended nozzle temperature of 195–220 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PHA/filaments/glow_pha/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/glow-pha
- colorFabb High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/high-speed-pla
- colorFabb LW-HT PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/lw_ht_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/lw-ht-pla
- colorFabb Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/matte-pla
- colorFabb PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/petg
- colorFabb PHA (PHA) has a recommended nozzle temperature of 195–220 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PHA/filaments/pha/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/pha
- colorFabb PHA PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/pha_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/pha-pla
- colorFabb PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/pla
- colorFabb r-Semi PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/r_semi_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/r-semi-pla
- colorFabb Semi PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/semi_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/semi-pla
- colorFabb Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/silk-pla
- colorFabb StoneFill PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/PLA/filaments/stonefill_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/stonefill-pla
- colorFabb TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/colorfabb/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/colorfabb/tpu
- Cookiecad ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/abs
- Cookiecad ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/asa
- Cookiecad PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/petg
- Cookiecad PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/pla
- Cookiecad PLA Mermaid (purple (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/PLA/filaments/mermaid_purple/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/pla-mermaid-purple
- Cookiecad PLA Mermaid Fast Change (purple (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/PLA/filaments/mermaid_fast_change_purple/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/pla-mermaid-fast-change-purple
- Cookiecad PLA Unicorn Fast Change (purple (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/PLA/filaments/unicorn_fast_change_purple/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/pla-unicorn-fast-change-purple
- Cookiecad Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/silk-pla
- Cookiecad TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/cookiecad/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/cookiecad/tpu
- Copymaster PLA (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/copymaster/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/copymaster/pla
- Creality 95A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/TPU/filaments/95a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/95a-tpu
- Creality ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/abs
- Creality CR-PETG (PETG) has a recommended nozzle temperature of 230–250 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PETG/filaments/cr_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/cr-petg
- Creality CR-PLA Carbon (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/cr_pla_carbon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/cr-pla-carbon
- Creality Ender Fast PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/ender_fast_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/ender-fast-pla
- Creality Ender PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 60–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/ender_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/ender-pla-plus
- Creality HP ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/ASA/filaments/hp_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hp-asa
- Creality HP-TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/TPU/filaments/hp_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hp-tpu
- Creality Hyper ABS (ABS) has a recommended nozzle temperature of 260 °C and a recommended bed temperature of 80 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/creality.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/creality/hyper-abs
- Creality Hyper Luminous PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/hyper_luminous_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hyper-luminous-pla
- Creality Hyper PA6-CF (PA/CF) has a recommended nozzle temperature of 280–300 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PA6/filaments/hyper_pa6_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hyper-pa6-cf
- Creality Hyper PC (PC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PC/filaments/hyper_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hyper-pc
- Creality Hyper PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PETG/filaments/hyper_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hyper-petg
- Creality Hyper PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/hyper_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hyper-pla
- Creality Hyper PLA-CF (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/hyper_pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hyper-pla-cf
- Creality Hyper Rainbow PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/hyper_rainbow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/hyper-rainbow-pla
- Creality PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/petg
- Creality PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/pla
- Creality PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/pla-cf
- Creality PLA CR-Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/cr_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/pla-cr-wood
- Creality PPA-CF (PPA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PPA/filaments/ppa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/ppa-cf
- Creality Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/creality/silk-pla
- Creality Soleyin Basic PETG (PETG) has a recommended nozzle temperature of 230–250 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PETG/filaments/soleyin_basic_petg/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/creality/soleyin-basic-petg
- Creality Soleyin Ultra PLA (PLA) has a recommended nozzle temperature of 190–220 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/creality/materials/PLA/filaments/soleyin_ultra_pla/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/creality/soleyin-ultra-pla
- Dancyn 3D Prints PETG HF (PETG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dancyn_3d_prints/materials/PETG/filaments/petg_hf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dancyn-3d-prints/petg-hf
- Dancyn 3D Prints PLA Basic (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dancyn_3d_prints/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dancyn-3d-prints/pla-basic
- Dancyn 3D Prints PLA Metal Series (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dancyn_3d_prints/materials/PLA/filaments/pla_metal_series/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dancyn-3d-prints/pla-metal-series
- Dancyn 3D Prints PLA+ High Speed (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dancyn_3d_prints/materials/PLA/filaments/pla_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dancyn-3d-prints/pla-plus-high-speed
- Das Filament Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/das_filament/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/das-filament/glow-pla
- Das Filament Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/das_filament/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/das-filament/matte-pla
- Das Filament PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/das_filament/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/das-filament/petg
- Das Filament PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/das_filament/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/das-filament/pla
- Das Filament PLA Toms3D (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/das_filament/materials/PLA/filaments/toms3d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/das-filament/pla-toms3d
- Das Filament TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/das_filament/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/das-filament/tpu
- Das Filament TPU V2 Flexibel (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/das_filament/materials/TPU/filaments/v2_flexibel/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/das-filament/tpu-v2-flexibel
- Devil Design ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/abs
- Devil Design ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/asa
- Devil Design Galaxy PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/PETG/filaments/galaxy_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/galaxy-petg
- Devil Design Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/glow-pla
- Devil Design HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/hips
- Devil Design PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/PA12/filaments/pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/pa12
- Devil Design PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/petg
- Devil Design PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/pla
- Devil Design Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/silk-pla
- Devil Design TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/devil_design/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/devil-design/tpu
- Dremel Df PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PLA/filaments/df_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/df-pla
- Dremel Digilab Eco PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PLA/filaments/digilab_eco_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/digilab-eco-pla
- Dremel Digilab PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PETG/filaments/digilab_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/digilab-petg
- Dremel Digilab PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PLA/filaments/digilab_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/digilab-pla
- Dremel Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/matte-pla
- Dremel PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/petg
- Dremel PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/pla
- Dremel Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/silk-pla
- Dremel TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/dremel/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/dremel/tpu
- DuramiC 3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/duramic_3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/duramic-3d/pla
- EasyPrint Flex 95A TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/easyprint/materials/TPU/filaments/flex_95a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/easyprint/flex-95a-tpu
- EasyPrint PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/easyprint/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/easyprint/petg
- EasyPrint PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/easyprint/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/easyprint/pla
- EasyPrint PVB (PVB) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/easyprint/materials/PVB/filaments/pvb/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/easyprint/pvb
- EconoFil Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/econofil/materials/PLA/filaments/pla_glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/econofil/glow-pla
- EconoFil Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/econofil/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/econofil/matte-pla
- EconoFil PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/econofil/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/econofil/petg
- EconoFil PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/econofil/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/econofil/petg-cf
- EconoFil PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/econofil/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/econofil/pla
- EconoFil Standard PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/econofil/materials/PLA/filaments/standard_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/econofil/standard-pla
- EconoFil Standard Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/econofil/materials/PLA/filaments/standard_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/econofil/standard-silk-pla
- ELEGOO ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/abs
- ELEGOO ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/asa
- ELEGOO Galaxy PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/galaxy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/galaxy-pla
- ELEGOO PAHT-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PA12/filaments/paht_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/paht-cf
- ELEGOO PC (PC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pc
- ELEGOO PC-FR (PC) has a recommended nozzle temperature of 260–280 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PC/filaments/pc_fr/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pc-fr
- ELEGOO PET-CF (PET) has a recommended nozzle temperature of 260–290 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PET/filaments/pet_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pet-cf
- ELEGOO PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/petg
- ELEGOO PETG PRO (PETG) has a recommended nozzle temperature of 235 °C and a recommended bed temperature of 75 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/elegoo.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/elegoo/petg-pro
- ELEGOO PETG Translucent (PETG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 65–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PETG/filaments/petg_translucent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/petg-translucent
- ELEGOO PETG-CF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/petg-cf
- ELEGOO PETG-GF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PETG/filaments/petg_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/petg-gf
- ELEGOO PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla
- ELEGOO PLA Basic (PLA) lists a nozzle temperature of 190–230 °C, a bed temperature of 35–65 °C, drying at 50 °C for 8 h (the page states 50 ± 5 °C), density 1.2 g/cm³, and a print speed under 270 mm/s, according to the ELEGOO US 10 kg product page (https://us.elegoo.com/products/pla-basic-filament-1-75-mm-colored-10kg, checked 2026-10-14). The Open Filament Database listed a nozzle of 190–220 °C and density 1.24 (dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-basic
- ELEGOO PLA Glow (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-glow
- ELEGOO PLA Marble (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 35–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-marble
- ELEGOO PLA MATTE (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-matte
- ELEGOO PLA Metallic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_metallic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-metallic
- ELEGOO PLA Plus (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-plus
- ELEGOO PLA PRO (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-pro
- ELEGOO PLA Sparkle (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_sparkle/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-sparkle
- ELEGOO PLA Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-wood
- ELEGOO PLA-CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/pla-cf
- ELEGOO RAPID PETG (PETG) has a recommended nozzle temperature of 245 °C and a recommended bed temperature of 80 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/elegoo.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/elegoo/rapid-petg
- ELEGOO RAPID PLA Plus (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/rapid_pla_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/rapid-pla-plus
- ELEGOO Rapid TPU 95A (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/TPU/filaments/rapid_tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/rapid-tpu-95a
- ELEGOO Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/silk-pla
- ELEGOO TPU 95A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/elegoo/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/elegoo/tpu-95a
- Eolas Prints ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/abs
- Eolas Prints ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/asa
- Eolas Prints Flex 93A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/TPU/filaments/flex_93a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/flex-93a-tpu
- Eolas Prints Flex D53 TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/TPU/filaments/flex_d53_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/flex-d53-tpu
- Eolas Prints Flex D60 UV Resistant TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/TPU/filaments/flex_d60_uv_resistant_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/flex-d60-uv-resistant-tpu
- Eolas Prints High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/high-speed-pla
- Eolas Prints Ingeo 850 PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/PLA/filaments/ingeo_850_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/ingeo-850-pla
- Eolas Prints Ingeo 870 PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/PLA/filaments/ingeo_870_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/ingeo-870-pla
- Eolas Prints Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/matte-pla
- Eolas Prints PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/petg
- Eolas Prints PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/pla
- Eolas Prints Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/silk-pla
- Eolas Prints TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eolas_prints/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eolas-prints/tpu
- EPAX 95A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/epax/materials/TPU/filaments/95a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/epax/95a-tpu
- EPAX ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/epax/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/epax/asa
- EPAX High Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/epax/materials/PETG/filaments/high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/epax/high-speed-petg
- EPAX High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/epax/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/epax/high-speed-pla
- EPAX Luminous High Speed Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/epax/materials/PLA/filaments/luminous_high_speed_glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/epax/luminous-high-speed-glow-pla
- EPAX Matte High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/epax/materials/PLA/filaments/matte_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/epax/matte-high-speed-pla
- EPAX Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/epax/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/epax/silk-pla
- Eryone ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/abs
- Eryone ABS High-Speed (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ABS/filaments/abs_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/abs-high-speed
- Eryone ABS-CF (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ABS/filaments/abs_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/abs-cf
- Eryone ABS-GF (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ABS/filaments/abs_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/abs-gf
- Eryone ABS-PC (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ABS/filaments/abs_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/abs-pc
- Eryone ABS+ (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ABS/filaments/abs+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/abs-plus
- Eryone ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/asa
- Eryone ASA High-Speed (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ASA/filaments/asa_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/asa-high-speed
- Eryone ASA Light-Weight (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ASA/filaments/asa_light_weight/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/asa-light-weight
- Eryone ASA-CF (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ASA/filaments/asa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/asa-cf
- Eryone ASA-GF (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/ASA/filaments/asa_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/asa-gf
- Eryone PA12 Nylon (PA12) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PA12/filaments/nylon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pa12-nylon
- Eryone PA12-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PA12/filaments/pa12_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pa12-cf
- Eryone PA12-GF (PA12) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PA12/filaments/pa12_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pa12-gf
- Eryone PA6-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PA6/filaments/pa6_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pa6-cf
- Eryone PA6-GF (PA6) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PA6/filaments/pa6_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pa6-gf
- Eryone PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/petg
- Eryone PETG-CF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/petg-cf
- Eryone PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla
- Eryone PLA Burnt Titanium (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_burnt_titanium/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-burnt-titanium
- Eryone PLA Burnt Titanium Dual-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_burnt_titanium_dual_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-burnt-titanium-dual-color
- Eryone PLA Burnt Titanium Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_burnt_titanium_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-burnt-titanium-rainbow
- Eryone PLA Burnt Titanium Triple Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_burnt_titanium_triple_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-burnt-titanium-triple-color
- Eryone PLA Galaxy (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-galaxy
- Eryone PLA High-Speed (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-high-speed
- Eryone PLA Light Weight (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_light_weight/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-light-weight
- Eryone PLA Luminous (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_luminous/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-luminous
- Eryone PLA Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-marble
- Eryone PLA Matte (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte
- Eryone PLA Matte Dual-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte_dual_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte-dual-color
- Eryone PLA Matte Gradient (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte_gradient/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte-gradient
- Eryone PLA Matte High Speed (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte-high-speed
- Eryone PLA Matte High Speed Gradient Multi-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte_high_speed_gradient_multi_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte-high-speed-gradient-multi-color
- Eryone PLA Matte High Speed Rock Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte_high_speed_rock_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte-high-speed-rock-rainbow
- Eryone PLA Matte High Speed Triple-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte_high_speed_triple_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte-high-speed-triple-color
- Eryone PLA Matte Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_matte_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-matte-rainbow
- Eryone PLA Metallic (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_metallic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-metallic
- Eryone PLA Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-rainbow
- Eryone PLA Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-silk
- Eryone PLA Silk High-Speed Dual-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_silk_high_speed_dual_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-silk-high-speed-dual-color
- Eryone PLA Silk High-Speed Quadruple (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_silk_high_speed_quadruple/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-silk-high-speed-quadruple
- Eryone PLA Silk High-Speed Triple-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_silk_high_speed_triple_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-silk-high-speed-triple-color
- Eryone PLA Silk Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_silk_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-silk-rainbow
- Eryone PLA Ultra Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_ultra_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-ultra-silk
- Eryone PLA Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-wood
- Eryone PLA-CF (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-cf
- Eryone PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-plus
- Eryone PLA+ High-Speed (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PLA/filaments/pla+_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pla-plus-high-speed
- Eryone PP (PP) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pp
- Eryone PP-CF (PP) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/PP/filaments/pp_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/pp-cf
- Eryone TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/tpu
- Eryone TPU 90A (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/TPU/filaments/tpu_90a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/tpu-90a
- Eryone TPU High-Speed (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/TPU/filaments/tpu_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/tpu-high-speed
- Eryone TPU Rainbow (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eryone/materials/TPU/filaments/tpu_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eryone/tpu-rainbow
- eSUN 3D ABS+ (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/ABS/filaments/abs+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/abs-plus
- eSUN 3D ABS+CF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/ABS/filaments/abs+cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/abs-pluscf
- eSUN 3D ABS+HS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/ABS/filaments/abs+hs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/abs-plushs
- eSUN 3D ASA+ (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/ASA/filaments/asa+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/asa-plus
- eSUN 3D Dark Twinkling PLA Magic (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/dark_twinkling_pla_magic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/dark-twinkling-pla-magic
- eSUN 3D ePAHT-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PA12/filaments/epaht_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/epaht-cf
- eSUN 3D ePLA+HS (PLA+) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/epla_hs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/epla-plushs
- eSUN 3D ESUN PETG Matte (PETG) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 60–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PETG/filaments/esun_petg_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/esun-petg-matte
- eSUN 3D Mystic Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_silk_mystic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/mystic-silk-pla
- eSUN 3D PA12-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PA12/filaments/pa12_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pa12-cf
- eSUN 3D PA6 PA (PA6) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PA6/filaments/pa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pa6-pa
- eSUN 3D PA6 PA-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PA6/filaments/pa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pa6-pa-cf
- eSUN 3D Peak PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_peak/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/peak-pla
- eSUN 3D PET (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PET/filaments/pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pet
- eSUN 3D PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/petg
- eSUN 3D PETG-Basic (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PETG/filaments/petg_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/petg-basic
- eSUN 3D PETG-Matte (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PETG/filaments/petg_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/petg-matte
- eSUN 3D PETG+CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PETG/filaments/petg+cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/petg-pluscf
- eSUN 3D PETG+HS (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PETG/filaments/petg+hs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/petg-plushs
- eSUN 3D PLA-Basic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-basic
- eSUN 3D PLA-CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-cf
- eSUN 3D PLA-Chameleon (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_chameleon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-chameleon
- eSUN 3D PLA-HS (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_hs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-hs
- eSUN 3D PLA-Lite (PLA) has a recommended nozzle temperature of 220 °C and a recommended bed temperature of 60 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/esun.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/esun-3d/pla-lite
- eSUN 3D PLA-Luminous (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_luminous/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-luminous
- eSUN 3D PLA-Luminous Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_luminous_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-luminous-rainbow
- eSUN 3D PLA-LW (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_lw/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-lw
- eSUN 3D PLA-Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-marble
- eSUN 3D PLA-Matte (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-matte
- eSUN 3D PLA-Metal (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-metal
- eSUN 3D PLA-Silk (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-silk
- eSUN 3D PLA-Silk Candy (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_silk_candy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-silk-candy
- eSUN 3D PLA-Silk Magic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_silk_magic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-silk-magic
- eSUN 3D PLA-Silk Metal (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_silk_metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-silk-metal
- eSUN 3D PLA-Silk Rainbow (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_silk_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-silk-rainbow
- eSUN 3D PLA-ST (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_st/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-st
- eSUN 3D PLA-Stars (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_stars/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-stars
- eSUN 3D PLA-Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-wood
- eSUN 3D PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-plus
- eSUN 3D PLA+ CMYK (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/pla+_cmyk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pla-plus-cmyk
- eSUN 3D PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/pva
- eSUN 3D Silk PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PETG/filaments/petg_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/silk-petg
- eSUN 3D TPE-83A (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/TPE/filaments/tpe_83a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/tpe-83a
- eSUN 3D TPU-95A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/tpu-95a
- eSUN 3D TPU-LW (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/TPU/filaments/tpu_lw/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/tpu-lw
- eSUN 3D UV Change PLA UV Color Change (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/esun_3d/materials/PLA/filaments/uv_change_pla_uv_color_change/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/esun-3d/uv-change-pla-uv-color-change
- EUMAKERS Fluorescent PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/fluorescent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/fluorescent-pla
- EUMAKERS Iridescent PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/iridescent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/iridescent-pla
- EUMAKERS Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/matte-pla
- EUMAKERS Metallic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/metallic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/metallic-pla
- EUMAKERS Pearl PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/pearl_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/pearl-pla
- EUMAKERS PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/pla
- EUMAKERS Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/silk-pla
- EUMAKERS Silver Glitter PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/silver_glitter_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/silver-glitter-pla
- EUMAKERS UV Reactive Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/eumakers/materials/PLA/filaments/uv_reactive_glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/eumakers/uv-reactive-glow-pla
- extrudr Basic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/basic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/basic-pla
- extrudr BioFusion PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/biofusion_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/biofusion-pla
- extrudr BioFusion Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/biofusion_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/biofusion-silk-pla
- extrudr DuraPro ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/ABS/filaments/durapro_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/durapro-abs
- extrudr DuraPro ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/ASA/filaments/durapro_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/durapro-asa
- extrudr DuraPro CF PA12 (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PA12/filaments/durapro_cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/durapro-cf-pa12
- extrudr DuraPro Matte ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/ASA/filaments/durapro_matte_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/durapro-matte-asa
- extrudr DuraPro PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PA12/filaments/durapro_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/durapro-pa12
- extrudr DuraPro PBT PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PC/filaments/durapro_pbt_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/durapro-pbt-pc
- extrudr Flax PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/flax_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/flax-pla
- extrudr FLEX Hard CF TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/TPU/filaments/flex_hard_cf_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/flex-hard-cf-tpu
- extrudr FLEX Hard TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/TPU/filaments/flex_hard_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/flex-hard-tpu
- extrudr FLEX Medium TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/TPU/filaments/flex_medium_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/flex-medium-tpu
- extrudr FLEX Semisoft TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/TPU/filaments/flex_semisoft_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/flex-semisoft-tpu
- extrudr Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/glow-petg
- extrudr GreenTEC Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/greentec_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/greentec-matte-pla
- extrudr GreenTEC PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/greentec_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/greentec-pla
- extrudr PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/pctg
- extrudr Pearl PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/pearl_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/pearl-pla
- extrudr PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/petg
- extrudr PLA NX2 Matt (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/nx2_matt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/pla-nx2-matt
- extrudr Wood PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/extrudr/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/extrudr/wood-pla
- Fiberlogy 9085 PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PEI/filaments/9085_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/9085-pei
- Fiberlogy ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/abs
- Fiberlogy ABS ESD (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ABS/filaments/abs_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/abs-esd
- Fiberlogy ABS PLUS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ABS/filaments/abs_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/abs-plus
- Fiberlogy ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/asa
- Fiberlogy BVOH (BVOH) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/BVOH/filaments/bvoh/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/bvoh
- Fiberlogy CPE (CPE) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/CPE/filaments/cpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/cpe
- Fiberlogy CPE HT (CPE) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/CPE/filaments/cpe_ht/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/cpe-ht
- Fiberlogy EASY ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ABS/filaments/easy_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/easy-abs
- Fiberlogy Easy PET-G (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/easy_pet_g/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/easy-pet-g
- Fiberlogy Easy PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/easy_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/easy-petg
- Fiberlogy Easy PLA (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/easy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/easy-pla
- Fiberlogy Fibersilk Metallic Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/fibersilk_metallic_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/fibersilk-metallic-silk-pla
- Fiberlogy Fibersmooth PVB (PVB) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PVB/filaments/fibersmooth_pvb/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/fibersmooth-pvb
- Fiberlogy Gf10 GF PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PCTG/filaments/gf10_gf_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/gf10-gf-pctg
- Fiberlogy HD PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/hd_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/hd-pla
- Fiberlogy HIPS (HIPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/hips
- Fiberlogy HS Clear High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/hs_clear_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/hs-clear-high-speed-pla
- Fiberlogy Impact PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/impact_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/impact-pla
- Fiberlogy Matt PET G Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/matt_pet_g_matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/matt-pet-g-matte-petg
- Fiberlogy Matte ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ASA/filaments/matte_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/matte-asa
- Fiberlogy Matte HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/HIPS/filaments/matte_hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/matte-hips
- Fiberlogy Mattflex 40D Matte TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/TPU/filaments/mattflex_40d_matte_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/mattflex-40d-matte-tpu
- Fiberlogy Nylon Gf15 GF PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA12/filaments/nylon_gf15_gf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/nylon-gf15-gf-pa12
- Fiberlogy Nylon PA12 (PA12) has a recommended nozzle temperature of 255–270 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA12/filaments/nylon_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/nylon-pa12
- Fiberlogy Nylon PA12+CF15 (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA12/filaments/nylon_pa12+cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/nylon-pa12-pluscf15
- Fiberlogy Nylon PA12+CF5 (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA12/filaments/nylon_pa12+cf5/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/nylon-pa12-pluscf5
- Fiberlogy Nylon PA12+GF15 (PA12) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA12/filaments/nylon_pa12+gf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/nylon-pa12-plusgf15
- Fiberlogy PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA12/filaments/pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pa12
- Fiberlogy PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pa12-cf
- Fiberlogy PA6 R NYLON (PA6) has a recommended nozzle temperature of 255–270 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PA6/filaments/r_nylon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pa6-r-nylon
- Fiberlogy PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pc
- Fiberlogy PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pctg
- Fiberlogy PCTG CF (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PCTG/filaments/pctg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pctg-cf
- Fiberlogy PET-G (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/pet_g/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pet-g
- Fiberlogy PET-G ESD (PETG) has a recommended nozzle temperature of 250–265 °C and a recommended bed temperature of 85 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/pet_g_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pet-g-esd
- Fiberlogy PET-G V0 PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/pet_g_v0_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pet-g-v0-petg
- Fiberlogy PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/petg
- Fiberlogy PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/petg-cf
- Fiberlogy PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pla
- Fiberlogy PLA FiberSatin (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/fibersatin/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pla-fibersatin
- Fiberlogy PLA FiberSilk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/fibersilk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pla-fibersilk
- Fiberlogy PLA FiberWood (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/fiberwood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pla-fiberwood
- Fiberlogy PLA Mineral (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/pla_mineral/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pla-mineral
- Fiberlogy PP (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/pp
- Fiberlogy R ABS (ABS) has a recommended nozzle temperature of 250–265 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ABS/filaments/r_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/r-abs
- Fiberlogy R PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/r_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/r-pla
- Fiberlogy R PP (PP) has a recommended nozzle temperature of 220–250 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PP/filaments/r_pp/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/fiberlogy/r-pp
- Fiberlogy Refill ABS (ABS) has a recommended nozzle temperature of 250–265 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ABS/filaments/refill_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/refill-abs
- Fiberlogy Refill Easy PET-G (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PETG/filaments/refill_easy_pet_g/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/refill-easy-pet-g
- Fiberlogy Refill Easy PLA (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/refill_easy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/refill-easy-pla
- Fiberlogy Refill PCTG (PCTG) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PCTG/filaments/refill_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/refill-pctg
- Fiberlogy Refill R ABS (ABS) has a recommended nozzle temperature of 250–265 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/ABS/filaments/refill_r_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/refill-r-abs
- Fiberlogy Refill R PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/PLA/filaments/refill_r_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/refill-r-pla
- Fiberlogy TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/tpu
- Fiberlogy TPU CF (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/TPU/filaments/cf_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/tpu-cf
- Fiberlogy TPU FiberFlex 30D (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/TPU/filaments/fiberflex_30d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/tpu-fiberflex-30d
- Fiberlogy TPU FiberFlex 40D (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/TPU/filaments/fiberflex_40d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/tpu-fiberflex-40d
- Fiberlogy TPU MattFlex 40D (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberlogy/materials/TPU/filaments/mattflex_40d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberlogy/tpu-mattflex-40d
- Fiberon Fiberon ASA-CF 08 (ASA) has a recommended nozzle temperature of 260–270 °C and a recommended bed temperature of 90–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/ASA/filaments/fiberon_asa_cf_08/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/fiberon-asa-cf-08
- Fiberon PA12-CF10 (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PA12/filaments/pa12_cf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pa12-cf10
- Fiberon PA6-CF20 (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PA6/filaments/pa6_cf20/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pa6-cf20
- Fiberon PA6-GF25 (PA6) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PA6/filaments/pa6_gf25/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pa6-gf25
- Fiberon PA612-CF15 (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PA6/filaments/pa612_cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pa612-cf15
- Fiberon PA612-ESD (PA6) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PA6/filaments/pa612_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pa612-esd
- Fiberon PET-CF17 (PET) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PET/filaments/pet_cf17/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pet-cf17
- Fiberon PETG-ESD (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PETG/filaments/petg_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/petg-esd
- Fiberon PETG-rCF08 (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PETG/filaments/petg_rcf08/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/petg-rcf08
- Fiberon PPS-CF10 (PPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PPS/filaments/pps_cf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pps-cf10
- Fiberon PPS-GF20 (PPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberon/materials/PPS/filaments/pps_gf20/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberon/pps-gf20
- FiberThree F3 CF 150 (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PC/filaments/f3_cf_150/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-cf-150
- FiberThree F3 GF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PLA/filaments/f3_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-gf
- FiberThree F3 GF 25 (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PP/filaments/f3_gf_25/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-gf-25
- FiberThree F3 PA CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/f3_pa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-cf
- FiberThree F3 PA CF Lite (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA12/filaments/f3_pa_cf_lite/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-cf-lite
- FiberThree F3 PA ESD (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/f3_pa_esd/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-esd
- FiberThree F3 PA GF (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/f3_pa_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-gf
- FiberThree F3 PA Ortho (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/f3_pa_ortho/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-ortho
- FiberThree F3 PA Pure (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/f3_pa_pure/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-pure
- FiberThree F3 PA Pure Lite (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA12/filaments/f3_pa_pure_lite/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-pure-lite
- FiberThree F3 PA-GF30 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/f3_pa_gf30/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/f3-pa-gf30
- FiberThree PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA12/filaments/pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pa12
- FiberThree PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pa12-cf
- FiberThree PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pa6
- FiberThree PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pa6-cf
- FiberThree PA6 GF (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PA6/filaments/gf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pa6-gf
- FiberThree PC CF (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PC/filaments/cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pc-cf
- FiberThree PLA GF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PLA/filaments/gf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pla-gf
- FiberThree PP GF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/PP/filaments/gf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/pp-gf
- FiberThree TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/tpu
- FiberThree TPU F3 80A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/TPU/filaments/f3_80a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/tpu-f3-80a
- FiberThree TPU F3 98A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fiberthree/materials/TPU/filaments/f3_98a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fiberthree/tpu-f3-98a
- FilaCube PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filacube/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filacube/pla
- FilaCube PLA Greenery (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filacube/materials/PLA/filaments/greenery_yellowish_green_shade/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filacube/pla-greenery
- Filamentive PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentive/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentive/pla
- FilamentPM ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/abs
- FilamentPM Army Edition PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/army_edition_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/army-edition-pla
- FilamentPM ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/asa
- FilamentPM ASA CF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/ASA/filaments/cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/asa-cf
- FilamentPM CPE CF (CPE) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/CPE/filaments/cf_cpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/cpe-cf
- FilamentPM Crystal Clear PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/crystal_clear_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/crystal-clear-pla
- FilamentPM ESD PETG (PETG) has a recommended nozzle temperature of 270–290 °C and a recommended bed temperature of 80–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PETG/filaments/esd_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/esd-petg
- FilamentPM Extrafill HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/HIPS/filaments/extrafill_hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/extrafill-hips
- FilamentPM Extrafill PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/extrafill_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/extrafill-pla
- FilamentPM Flexfill 90A Peba (PEBA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PEBA/filaments/flexfill_90a_peba/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/flexfill-90a-peba
- FilamentPM Flexfill TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/TPE/filaments/flexfill_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/flexfill-tpe
- FilamentPM Flexfill TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/TPU/filaments/flexfill_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/flexfill-tpu
- FilamentPM Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/glow-pla
- FilamentPM Hg100 Cpe (CPE) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/CPE/filaments/hg100_cpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/hg100-cpe
- FilamentPM MarbleJet PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/marblejet_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/marblejet-pla
- FilamentPM Matte HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/HIPS/filaments/matte_hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/matte-hips
- FilamentPM Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/matte-pla
- FilamentPM PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PA12/filaments/pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pa12
- FilamentPM PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pa12-cf
- FilamentPM PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pa6
- FilamentPM PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pa6-cf
- FilamentPM Pastel Edition PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/pastel_edition_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pastel-edition-pla
- FilamentPM PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pc
- FilamentPM Pearl PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/pearl_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pearl-pla
- FilamentPM PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PEI/filaments/pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pei
- FilamentPM PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/petg
- FilamentPM PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/petg-cf
- FilamentPM PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pla
- FilamentPM PP (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/pp
- FilamentPM Silk PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PETG/filaments/silk_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/silk-petg
- FilamentPM Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/silk-pla
- FilamentPM Skin Edition PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/skin_edition_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/skin-edition-pla
- FilamentPM Timberfill PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PLA/filaments/timberfill_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/timberfill-pla
- FilamentPM TPE 32 Rubberjet Flex (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/TPE/filaments/32_rubberjet_flex/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/tpe-32-rubberjet-flex
- FilamentPM TPE 88 Rubberjet Flex (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/TPE/filaments/88_rubberjet_flex/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/tpe-88-rubberjet-flex
- FilamentPM TPU 96 (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/TPU/filaments/96/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/tpu-96
- FilamentPM Vinyl 303 Pvc (PVC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentpm/materials/PVC/filaments/vinyl_303_pvc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentpm/vinyl-303-pvc
- Filamentree Blaster PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentree/materials/PLA/filaments/blaster_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentree/blaster-pla
- Filamentree PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentree/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentree/petg
- Filamentree PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentree/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentree/petg-cf
- Filamentree PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentree/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentree/pla
- Filamentree PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentree/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentree/pla-cf
- Filamentree Plus PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentree/materials/PLA/filaments/plus_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentree/plus-pla
- Filamentworld ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentworld/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentworld/abs
- Filamentworld Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentworld/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentworld/matte-pla
- Filamentworld Metallic Silk PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentworld/materials/PETG/filaments/metallic_silk_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentworld/metallic-silk-petg
- Filamentworld PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentworld/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentworld/petg
- Filamentworld PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentworld/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentworld/pla
- Filamentworld Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filamentworld/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filamentworld/silk-pla
- Filatech ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filatech/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filatech/abs
- Filatech PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filatech/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filatech/pla
- Filkemp PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filkemp/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filkemp/petg
- Filkemp PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/filkemp/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/filkemp/pla
- Fillamentum ASA Extrafill (ASA) has a recommended nozzle temperature of 240–255 °C and a recommended bed temperature of 80–105 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fillamentum/materials/ASA/filaments/extrafill/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fillamentum/asa-extrafill
- Fillamentum CPE HG100 (CPE) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fillamentum/materials/CPE/filaments/cpe_hg100/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fillamentum/cpe-hg100
- Fillamentum PLA Crystal Clear (PLA) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 0–55 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fillamentum/materials/PLA/filaments/pla_crystal_clear/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fillamentum/pla-crystal-clear
- Fillamentum PLA Extrafill (PLA) has a recommended nozzle temperature of 190–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fillamentum/materials/PLA/filaments/extrafill/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fillamentum/pla-extrafill
- FLASHFORGE ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/abs
- FLASHFORGE ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/asa
- FLASHFORGE ASA Basic (ASA) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/ASA/filaments/asa_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/asa-basic
- FLASHFORGE Chameleon PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PETG/filaments/chameleon_high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/chameleon-petg
- FLASHFORGE D Series ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/ABS/filaments/d_series_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/d-series-abs
- FLASHFORGE Gradient Rapid Chameleon PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/gradient_rapid_chameleon_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/gradient-rapid-chameleon-pla
- FLASHFORGE High Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PETG/filaments/high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/high-speed-petg
- FLASHFORGE High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/high-speed-pla
- FLASHFORGE Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/matte-pla
- FLASHFORGE Metallic Rapid Silk PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PETG/filaments/metallic_rapid_silk_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/metallic-rapid-silk-petg
- FLASHFORGE PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/petg
- FLASHFORGE PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/petg-cf
- FLASHFORGE PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/pla
- FLASHFORGE PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/pla-cf
- FLASHFORGE Rapid Chameleon PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/rapid_chameleon_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/rapid-chameleon-pla
- FLASHFORGE Rapid Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/rapid_glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/rapid-glow-pla
- FLASHFORGE Rapid PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PETG/filaments/rapid_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/rapid-petg
- FLASHFORGE Rapid PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/rapid_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/rapid-pla
- FLASHFORGE Silk PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PETG/filaments/silk_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/silk-petg
- FLASHFORGE Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/flashforge/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/flashforge/silk-pla
- FormFutura ABSpro (ABS) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/abspro
- FormFutura ABSpro Flame Retardant (ABS) has a recommended nozzle temperature of 240–265 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ABS/filaments/flame_retardant_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/abspro-flame-retardant
- FormFutura ASA ApolloX (ASA) has a recommended nozzle temperature of 230–280 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/asa-apollox
- FormFutura ASA ApolloX CF10 (ASA) has a recommended nozzle temperature of 240–265 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ASA/filaments/asa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/asa-apollox-cf10
- FormFutura ASA ApolloX Flame Retardant (ASA) has a recommended nozzle temperature of 230–280 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ASA/filaments/apollox_flame_retardant/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/asa-apollox-flame-retardant
- FormFutura ASA ApolloX Foaming (ASA) has a recommended nozzle temperature of 220–285 °C and a recommended bed temperature of 60–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ASA/filaments/apollox_foaming/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/asa-apollox-foaming
- FormFutura ASA ApolloX Kevlar (ASA) has a recommended nozzle temperature of 255–265 °C and a recommended bed temperature of 85–95 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ASA/filaments/apollox_kevlar/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/asa-apollox-kevlar
- FormFutura ASA ReForm – rApollo (ASA) has a recommended nozzle temperature of 230–270 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ASA/filaments/reform_rapollo/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/asa-reform-rapollo
- FormFutura AthenaX (PCTG) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 85–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PCTG/filaments/athenax_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/athenax
- FormFutura AthenaX CF10 (PCTG) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 85–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PCTG/filaments/pctg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/athenax-cf10
- FormFutura AthenaX GF10 (PCTG) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 85–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PCTG/filaments/athena_gf10_gf_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/athenax-gf10
- FormFutura BioFil - PCL (PCL) has a recommended nozzle temperature of 95–130 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PCL/filaments/pcl/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/biofil-pcl
- FormFutura BioFil - Wood (PCL) has a recommended nozzle temperature of 180–200 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PCL/filaments/biofil_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/biofil-wood
- FormFutura Bulk PETG (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 80–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/bulk_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/bulk-petg
- FormFutura Bulk PLA (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/bulk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/bulk-pla
- FormFutura BVOH (BVOH) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 65–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/BVOH/filaments/bvoh/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/bvoh
- FormFutura CarbonFil (PETG) has a recommended nozzle temperature of 230–275 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/petg_carbonfil/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/carbonfil
- FormFutura CarbonFil CF03 (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/carbonfil_cf03/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://www.formfutura.com/web/content/256494?download=true. https://filamentfacts.com/brand/formfutura/carbonfil-cf03
- FormFutura EasyFil ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ABS/filaments/easyfil_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-abs
- FormFutura EasyFil ABS - Glow in the Dark (ABS) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ABS/filaments/glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-abs-glow-in-the-dark
- FormFutura EasyFil e Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/easyfil_e_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-e-matte-pla
- FormFutura EasyFil ePETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/easyfil_e_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-epetg
- FormFutura EasyFil ePLA (PLA) has a recommended nozzle temperature of 200–275 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/easyfil_e_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-epla
- FormFutura EasyFil HIPS (HIPS) has a recommended nozzle temperature of 230–245 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/HIPS/filaments/easyfil_hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-hips
- FormFutura EasyFil PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/easyfil_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-pla
- FormFutura EasyFil PLA - Glow in the Dark (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/easyfil_pla_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-pla-glow-in-the-dark
- FormFutura EasyFil PLA - Glow in the Dark (PLA) has a recommended nozzle temperature of 195–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easyfil-pla-glow-in-the-dark-2
- FormFutura EasyWood (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/easywood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/easywood
- FormFutura Flexifil Tpc (TPC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/TPC/filaments/flexifil_tpc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/flexifil-tpc
- FormFutura Galaxy PLA (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/galaxy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/galaxy-pla
- FormFutura Hdglass (PETG) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 80–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/petg_hdglass/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/hdglass
- FormFutura High Gloss PLA (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/high_gloss_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/high-gloss-pla
- FormFutura High Precision PET (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PET/filaments/high_precision_pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/high-precision-pet
- FormFutura High Precision PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/high_precision_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/high-precision-pla
- FormFutura Kratos PC (PC) has a recommended nozzle temperature of 290–320 °C and a recommended bed temperature of 100–130 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PC/filaments/kratos_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/kratos-pc
- FormFutura Kratos PC CF10 (PC) has a recommended nozzle temperature of 270–310 °C and a recommended bed temperature of 100–130 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PC/filaments/pc_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/kratos-pc-cf10
- FormFutura LUVOCOM 3F PAHT 9825 (PA6) has a recommended nozzle temperature of 255–275 °C and a recommended bed temperature of 60–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/luvocom_3f_paht_9825/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-paht-9825
- FormFutura LUVOCOM 3F PAHT 9936 (PA6) has a recommended nozzle temperature of 255–275 °C and a recommended bed temperature of 60–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/luvocom_3f_paht_9936/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-paht-9936
- FormFutura LUVOCOM 3F PAHT CF 9742 (PA/CF) has a recommended nozzle temperature of 260–290 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/luvocom_3f_paht_cf_9742/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-paht-cf-9742
- FormFutura LUVOCOM 3F PAHT CF 9891 (PA/CF) has a recommended nozzle temperature of 260–270 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/luvocom_3f_paht_cf_9891/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-paht-cf-9891
- FormFutura LUVOCOM 3F PAHT KK 50056 FR (PA6) has a recommended nozzle temperature of 270–300 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/luvocom_3f_paht_kk_50056_fr/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-paht-kk-50056-fr
- FormFutura LUVOCOM 3F PEEK 9581 (PEEK) has a recommended nozzle temperature of 370–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PEEK/filaments/peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-peek-9581
- FormFutura LUVOCOM 3F PEEK CF 9676 (PEEK) has a recommended nozzle temperature of 400–450 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PEEK/filaments/cf_peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-peek-cf-9676
- FormFutura LUVOCOM 3F PEI 50236 (PEI) has a recommended nozzle temperature of 400–450 °C and a recommended bed temperature of 130–150 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PEI/filaments/luvocom_3f_pei_50236/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-pei-50236
- FormFutura LUVOCOM 3F PEKK 50082 (PEKK) has a recommended nozzle temperature of 320–360 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PEKK/filaments/pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/luvocom-3f-pekk-50082
- FormFutura Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/matte-pla
- FormFutura MetalFil PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/metalfil_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/metalfil-pla
- FormFutura PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pa6-cf
- FormFutura PC CF (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PC/filaments/cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pc-cf
- FormFutura PCTG CF (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PCTG/filaments/cf_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pctg-cf
- FormFutura PEI ULTEM 1010 (PEI) has a recommended nozzle temperature of 360–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PEI/filaments/ultem_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pei-ultem-1010
- FormFutura PEI ULTEM 9085 (PEI) has a recommended nozzle temperature of 350–390 °C and a recommended bed temperature of at least 120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PEI/filaments/pei_ultem_9085/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pei-ultem-9085
- FormFutura PET (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PET/filaments/pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pet
- FormFutura PETG CarbonFil (PETG) has a recommended nozzle temperature of 230–275 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/carbonfil_cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/petg-carbonfil
- FormFutura PETG Hdglass (PETG) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 80–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/hdglass_silk_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/petg-hdglass
- FormFutura PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pla
- FormFutura PP CF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PP/filaments/cf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pp-cf
- FormFutura PPS CF (PPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PPS/filaments/cf_pps/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pps-cf
- FormFutura PPSU (PPSU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PPSU/filaments/ppsu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/ppsu
- FormFutura Premium ABS Medical (ABS) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ABS/filaments/premium_abs_medical/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/premium-abs-medical
- FormFutura Premium PETG Flame Retardant (PETG) has a recommended nozzle temperature of 225–270 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/premium_petg_flame_retardant/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/premium-petg-flame-retardant
- FormFutura Premium PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/premium_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/premium-pla
- FormFutura PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/pva
- FormFutura Python Flex TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/TPU/filaments/python_flex_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/python-flex-tpu
- FormFutura ReFill PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 75–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PETG/filaments/refill_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/refill-petg
- FormFutura ReForm - rPET (PET) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PET/filaments/reform_r_pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/reform-rpet
- FormFutura ReForm - rTitan (ABS) has a recommended nozzle temperature of 245–265 °C and a recommended bed temperature of 80–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ABS/filaments/reform_rtitan_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/reform-rtitan
- FormFutura ReForm r PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/reform_r_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/reform-r-pla
- FormFutura StoneFil PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/stonefil_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/stonefil-pla
- FormFutura STYX PA6 (PA6) has a recommended nozzle temperature of 255–285 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/styx-pa6
- FormFutura STYX PA6-CF15 (PA/CF) has a recommended nozzle temperature of 255–295 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/pa6_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/styx-pa6-cf15
- FormFutura Styx PA6-GF30 (PA6) has a recommended nozzle temperature of 255–295 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PA6/filaments/styx_gf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/styx-pa6-gf30
- FormFutura TitanX (ABS) has a recommended nozzle temperature of 245–270 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ABS/filaments/titanx_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/titanx
- FormFutura Volcano Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/PLA/filaments/volcano_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/formfutura/volcano-matte-pla
- Francofil 88A TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/TPE/filaments/88a_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/88a-tpe
- Francofil 95A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/TPU/filaments/95a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/95a-tpu
- Francofil 98A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/TPU/filaments/98a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/98a-tpu
- Francofil ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/abs
- Francofil ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/asa
- Francofil Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/glow-pla
- Francofil PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/petg
- Francofil PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/petg-cf
- Francofil PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/pla
- Francofil TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/francofil/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/francofil/tpu
- Fremover PLA+ High Speed (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 55–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/fremover/materials/PLA/filaments/pla_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/fremover/pla-plus-high-speed
- Geeetech ABS+ (ABS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 95–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/ABS/filaments/abs_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/abs-plus
- Geeetech Luminous Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PLA/filaments/luminous_glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/luminous-glow-pla
- Geeetech Matte PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/matte-pla
- Geeetech PETG (PETG) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/petg
- Geeetech PLA (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/pla
- Geeetech PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/pla-cf
- Geeetech PLA Marble (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/pla-marble
- Geeetech PLA Wood (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/pla-wood
- Geeetech Silk PLA (PLA) has a recommended nozzle temperature of 195–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/silk-pla
- Geeetech TPU (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/tpu
- Geeetech Upgrade ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/geeetech/materials/ABS/filaments/upgrade_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/geeetech/upgrade-abs
- GIANTARM Glow in the Dark PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/giantarm/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/giantarm/glow-in-the-dark-pla
- GIANTARM PLA Silk (PLA) has a recommended nozzle temperature of 195–230 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/giantarm/materials/PLA/filaments/giantarm/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/giantarm/pla-silk
- Gizmo Dorks ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/abs
- Gizmo Dorks ABS CF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/ABS/filaments/cf_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/abs-cf
- Gizmo Dorks Acetal POM (POM) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/POM/filaments/acetal_pom/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/acetal-pom
- Gizmo Dorks Color Change ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/ABS/filaments/color_change_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/color-change-abs
- Gizmo Dorks Color Change PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PLA/filaments/color_change_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/color-change-pla
- Gizmo Dorks Fluorescent ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/ABS/filaments/fluorescent_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/fluorescent-abs
- Gizmo Dorks Fluorescent PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PLA/filaments/fluorescent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/fluorescent-pla
- Gizmo Dorks Glitter Sparkle PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PLA/filaments/glitter_sparkle_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/glitter-sparkle-pla
- Gizmo Dorks Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/ABS/filaments/glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/glow-abs
- Gizmo Dorks Glow HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/HIPS/filaments/glow_hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/glow-hips
- Gizmo Dorks Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/glow-pla
- Gizmo Dorks HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/hips
- Gizmo Dorks Low Odor ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/ABS/filaments/low_odor_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/low-odor-abs
- Gizmo Dorks PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/pc
- Gizmo Dorks PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/petg
- Gizmo Dorks PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/pla
- Gizmo Dorks PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/pva
- Gizmo Dorks Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/silk-pla
- Gizmo Dorks Thermochromic ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/ABS/filaments/thermochromic_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/thermochromic-abs
- Gizmo Dorks Thermochromic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/PLA/filaments/thermochromic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/thermochromic-pla
- Gizmo Dorks TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gizmo_dorks/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gizmo-dorks/tpu
- GST3D ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/abs
- GST3D ASA 900Grs (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/ASA/filaments/asa_900grs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/asa-900grs
- GST3D Bright Pla+ Space (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PLA/filaments/bright_pla+_space/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/bright-pla-plus-space
- GST3D PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/petg
- GST3D PETG translucent (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PETG/filaments/petg_translucent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/petg-translucent
- GST3D PETG-CF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/petg-cf
- GST3D PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/pla-plus
- GST3D PLA+ Military (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PLA/filaments/pla+_military/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/pla-plus-military
- GST3D PLA+ SILK (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PLA/filaments/pla+_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/pla-plus-silk
- GST3D PLA+ Special (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/PLA/filaments/pla+_special/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/pla-plus-special
- GST3D TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/gst3d/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/gst3d/tpu
- Hatchbox ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/abs
- Hatchbox Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/ABS/filaments/glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/glow-abs
- Hatchbox Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/glow-pla
- Hatchbox Metallic Finish PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/metallic_finish_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/metallic-finish-pla
- Hatchbox PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/petg
- Hatchbox PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/pla
- Hatchbox PLA Basic (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/pla-basic
- Hatchbox PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/pla-cf
- Hatchbox PLA Matte (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/pla-matte
- Hatchbox PLA Max (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/max/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/pla-max
- Hatchbox PLA Metal (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/pla-metal
- Hatchbox PLA Pro (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/pla-pro
- Hatchbox Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/silk-pla
- Hatchbox TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/tpu
- Hatchbox Transparent PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/transparent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/transparent-pla
- Hatchbox UV Color Changing PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/uv_color_changing_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/uv-color-changing-pla
- Hatchbox Wood PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hatchbox/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/hatchbox/wood-pla
- Hobby Lobby Candyblack/Silver (PLA) has a recommended nozzle temperature of 200–220 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hobby_lobby/materials/PLA/filaments/candyblack_silver/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/hobby-lobby/candyblack-silver
- Hobby Lobby PLA (PLA) has a recommended nozzle temperature of 200–220 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hobby_lobby/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/hobby-lobby/pla
- Hobby Lobby PLA Silk (PLA) has a recommended nozzle temperature of 200–220 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/hobby_lobby/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/hobby-lobby/pla-silk
- iBOSS 3D Light Gray (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 50–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iboss_3d/materials/PETG/filaments/light_gray/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iboss-3d/light-gray
- iBOSS 3D PLA+/Pro Silk Triple Red Blue Green (PLA+) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iboss_3d/materials/PLA/filaments/pla_pro_silk_triple_red_blue_green/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iboss-3d/pla-plus-pro-silk-triple-red-blue-green
- IC3D ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ic3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ic3d/abs
- IC3D Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ic3d/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ic3d/matte-pla
- IC3D PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ic3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ic3d/petg
- IC3D PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ic3d/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ic3d/petg-cf
- IC3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ic3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ic3d/pla
- IC3D Recycled Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ic3d/materials/PETG/filaments/recycled_matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ic3d/recycled-matte-petg
- IEMAI ABS (ABS) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/abs
- IEMAI ASA (ASA) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/asa
- IEMAI CF-ABS (ABS) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/ABS/filaments/cf_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-abs
- IEMAI CF-ASA (ASA) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/ASA/filaments/cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-asa
- IEMAI CF-PA12 (PA/CF) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 80–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-pa12
- IEMAI CF-PA6 (PA/CF) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 80–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-pa6
- IEMAI CF-PC (PC) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PC/filaments/cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-pc
- IEMAI CF-PETG (PETG) has a recommended nozzle temperature of 230–250 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-petg
- IEMAI CF-PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-pla
- IEMAI CF-PPS (PPS) has a recommended nozzle temperature of 300–340 °C and a recommended bed temperature of 120–150 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PPS/filaments/cf_pps/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/cf-pps
- IEMAI ESD-ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/ABS/filaments/esd_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/esd-abs
- IEMAI GF-PA12 (PA12) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 80–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PA12/filaments/gf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/gf-pa12
- IEMAI PA12 (PA12) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PA12/filaments/pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/pa12
- IEMAI PC (PC) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/pc
- IEMAI PEEK (PEEK) has a recommended nozzle temperature of 360–410 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PEEK/filaments/peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/peek
- IEMAI PEI 1010 (PEI) has a recommended nozzle temperature of 330–370 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PEI/filaments/pei_1010/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/pei-1010
- IEMAI PEI 9085 (PEI) has a recommended nozzle temperature of 330–370 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PEI/filaments/pei_9085/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/pei-9085
- IEMAI PEKK (PEKK) has a recommended nozzle temperature of 360–410 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PEKK/filaments/pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/pekk
- IEMAI PETG (PETG) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/petg
- IEMAI PLA (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/pla
- IEMAI PP (PP) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 50–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/pp
- IEMAI PPSU (PPSU) has a recommended nozzle temperature of 320–370 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/PPSU/filaments/ppsu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/ppsu
- IEMAI TPU (TPU) has a recommended nozzle temperature of 200–240 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iemai/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iemai/tpu
- IIID MAX PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/iiid_max/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/iiid-max/pla
- Inland ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/abs
- Inland Carbon Fiber Nylon (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PA6/filaments/carbon_fiber_nylon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/carbon-fiber-nylon
- Inland Galaxy PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/galaxy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/galaxy-pla
- Inland Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/ABS/filaments/glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/glow-abs
- Inland High Speed PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/high_speed_pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/high-speed-pla-plus
- Inland PETG+ (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PETG/filaments/petg+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/petg-plus
- Inland PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla
- Inland PLA Basic (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla-basic
- Inland PLA Chameleon (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla_chameleon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla-chameleon
- Inland Pla Glitter Rainbow (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla_glitter_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla-glitter-rainbow
- Inland PLA Matte (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla-matte
- Inland PLA Mystic Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla_mystic_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla-mystic-silk
- Inland Pla Silk Rainbow (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla_silk_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla-silk-rainbow
- Inland PLA+ (PLA+) has a recommended nozzle temperature of 205–225 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/pla-plus
- Inland Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/silk-pla
- Inland TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inland/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inland/tpu
- Insignia PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/insignia/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/insignia/petg
- Insignia PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/insignia/materials/PLA/filaments/insignia/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/insignia/pla
- Insignia Silk_PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/insignia/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/insignia/silk-pla
- Inslogic ABS FR V0 (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/ABS/filaments/abs_fr_v0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/abs-fr-v0
- Inslogic ABS GF10 (ABS) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/ABS/filaments/abs_gf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/abs-gf10
- Inslogic ASA (ASA) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/asa
- Inslogic High Speed Marble PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PLA/filaments/high_speed_marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/high-speed-marble-pla
- Inslogic High Speed PLA Pro (PLA) has a recommended nozzle temperature of 190–260 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PLA/filaments/high_speed_pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/high-speed-pla-pro
- Inslogic Matte PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/matte-pla
- Inslogic Multicolor Silk PLA (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PLA/filaments/multicolor_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/multicolor-silk-pla
- Inslogic Nylon PA6/66 (PA6) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PA6/filaments/nylon_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/nylon-pa6-66
- Inslogic PA12-CF (PA/CF) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PA12/filaments/pa12_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/pa12-cf
- Inslogic PA6-CF (PA/CF) has a recommended nozzle temperature of 260–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PA6/filaments/pa6_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/pa6-cf
- Inslogic PA6-GF25 (PA6) has a recommended nozzle temperature of 260–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PA6/filaments/pa6_gf25/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/pa6-gf25
- Inslogic PC-ABS (PC) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PC/filaments/pc_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/pc-abs
- Inslogic PEEK (PEEK) has a recommended nozzle temperature of 380–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PEEK/filaments/peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/peek
- Inslogic PETG CF10 (PETG) has a recommended nozzle temperature of 230–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PETG/filaments/petg_cf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/petg-cf10
- Inslogic PETG Pro (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PETG/filaments/petg_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/petg-pro
- Inslogic PLA CF15 (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PLA/filaments/pla_cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/pla-cf15
- Inslogic PLA Pro (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PLA/filaments/pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/pla-pro
- Inslogic PP (PP) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/pp
- Inslogic TPU 90A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/TPU/filaments/tpu_90a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/tpu-90a
- Inslogic TPU 95A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/tpu-95a
- Inslogic WoodFill PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/inslogic/materials/PLA/filaments/woodfill_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/inslogic/woodfill-pla
- iSangHu Gradiant ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/isanghu/materials/ASA/filaments/gradiant_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/isanghu/gradiant-asa
- iSangHu High Speed Translucent PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/isanghu/materials/PETG/filaments/high_speed_translucent_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/isanghu/high-speed-translucent-petg
- iSANMATE ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/isanmate/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/isanmate/asa
- iSANMATE iSANMATE Matte PLA (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 35–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/isanmate/materials/PLA/filaments/isanmate_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/isanmate/isanmate-matte-pla
- iSANMATE iSANMATE violet (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/isanmate/materials/PLA/filaments/isanmate_violet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/isanmate/isanmate-violet
- iSANMATE PETG Clear Glitter (PETG) has a recommended nozzle temperature of 260–280 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/isanmate/materials/PETG/filaments/clear_glitter_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/isanmate/petg-clear-glitter
- iSANMATE pink (PETG) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/isanmate/materials/PETG/filaments/pink/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/isanmate/pink
- JAYO High Speed Matte PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jayo/materials/PLA/filaments/high_speed_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jayo/high-speed-matte-pla
- JAYO Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jayo/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jayo/matte-pla
- JAYO PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jayo/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jayo/petg
- JAYO PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jayo/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jayo/pla
- JAYO PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jayo/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jayo/pla-plus
- JAYO Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jayo/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jayo/silk-pla
- JAYO TPU (TPU) has a recommended nozzle temperature of 190–231 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jayo/materials/TPU/filaments/red/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jayo/tpu
- Jessie PLA Premium Elixir (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jessie/materials/PLA/filaments/premium_elixir/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jessie/pla-premium-elixir
- Jessie Premium PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jessie/materials/PLA/filaments/premium_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jessie/premium-pla
- Jessie Premium PLA Glitter (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/jessie/materials/PLA/filaments/premium_pla_glitter/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/jessie/premium-pla-glitter
- kexcelled The K5 ABS T (ABS) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kexcelled/materials/ABS/filaments/the_k5_abs_t/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kexcelled/the-k5-abs-t
- kexcelled The K8 TPU 64D (TPU) has a recommended nozzle temperature of 215–235 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kexcelled/materials/TPU/filaments/the_k8_tpu_64d/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/kexcelled/the-k8-tpu-64d
- Kimya PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kimya/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kimya/petg
- Kingroon ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/abs
- Kingroon Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/glow-pla
- Kingroon High Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PETG/filaments/high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/high-speed-petg
- Kingroon High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/high-speed-pla
- Kingroon Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/matte-pla
- Kingroon PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/petg
- Kingroon PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/petg-cf
- Kingroon PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/pla
- Kingroon PLA Basic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PLA/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/pla-basic
- Kingroon PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/pla-cf
- Kingroon Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/silk-pla
- Kingroon TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kingroon/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kingroon/tpu
- KiwiFil PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/petg
- KiwiFil PETG Rainbow "Dark Green Ocean" (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PETG/filaments/rainbow_dark_green_ocean/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/petg-rainbow-dark-green-ocean
- KiwiFil PETG Rainbow "Dark Purple Galaxy" (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PETG/filaments/rainbow_dark_purple_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/petg-rainbow-dark-purple-galaxy
- KiwiFil PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/pla
- KiwiFil PLA "Sparkly Green Ocean" (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PLA/filaments/sparkly_green_ocean/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/pla-sparkly-green-ocean
- KiwiFil PLA Rainbow "Sparkly Green Ocean" (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PLA/filaments/rainbow_sparkly_green_ocean/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/pla-rainbow-sparkly-green-ocean
- KiwiFil PLA Rainbow "Sparkly Purple Galaxy" (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PLA/filaments/rainbow_sparkly_purple_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/pla-rainbow-sparkly-purple-galaxy
- KiwiFil PLA Rustic Rainbow (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PLA/filaments/rustic_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/pla-rustic-rainbow
- KiwiFil Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/kiwifil/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/kiwifil/silk-pla
- L3D PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/l3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/l3d/petg
- L3D PLA Basic (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/l3d/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/l3d/pla-basic
- L3D PLA Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/l3d/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/l3d/pla-silk
- Landu PLA Metal (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 45–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/landu/materials/PLA/filaments/pla_metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/landu/pla-metal
- Landu PLA Silk (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/landu/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/landu/pla-silk
- LayerWorks Solutions LayerWorks WORKS series (PLA) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 20–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/layerworks_solutions/materials/PLA/filaments/layerworks_works_series/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/layerworks-solutions/layerworks-works-series
- LDO ABS (ABS) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ldo/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ldo/abs
- LDO ASA (ASA) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ldo/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ldo/asa
- LDO ASA-CF (ASA) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ldo/materials/ASA/filaments/asa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ldo/asa-cf
- LOCYFENS Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/locyfens/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/locyfens/silk-pla
- LOVOON Silk Magic Color (PLA) has a recommended nozzle temperature of 190–220 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/lovoon/materials/PLA/filaments/silk_magic_color/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/lovoon/silk-magic-color
- MarsWork PLA Basic (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/marswork/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/marswork/pla-basic
- MarsWork PLA Matte (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/marswork/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/marswork/pla-matte
- Matter3D Inc Glitter Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matter3d_inc/materials/PLA/filaments/glitter_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matter3d-inc/glitter-silk-pla
- Matter3D Inc Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matter3d_inc/materials/PETG/filaments/matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matter3d-inc/matte-petg
- Matter3D Inc Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matter3d_inc/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matter3d-inc/matte-pla
- Matter3D Inc Performance PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matter3d_inc/materials/PLA/filaments/performance_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matter3d-inc/performance-pla
- Matter3D Inc PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matter3d_inc/materials/PETG/filaments/high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matter3d-inc/petg
- Matter3D Inc PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matter3d_inc/materials/PETG/filaments/high_speed_cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matter3d-inc/petg-cf
- Matter3D Inc PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matter3d_inc/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matter3d-inc/pla
- MatterHackers ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/abs
- MatterHackers CPE (CPE) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/CPE/filaments/cpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/cpe
- MatterHackers Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/glow-pla
- MatterHackers Mh Build Series Flexible TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/TPU/filaments/mh_build_series_flexible_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/mh-build-series-flexible-tpu
- MatterHackers PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/pa12-cf
- MatterHackers PA12 GF (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PA12/filaments/gf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/pa12-gf
- MatterHackers PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/pa6
- MatterHackers PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/petg
- MatterHackers PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/pla
- MatterHackers Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/silk-pla
- MatterHackers TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/matterhackers/tpu
- Mika3D Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/mika3d/materials/PLA/filaments/silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/mika3d/silk
- Mosaic ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/mosaic/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/mosaic/abs
- Mosaic ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/mosaic/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/mosaic/asa
- Mosaic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/mosaic/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/mosaic/pla
- Nebula ABS Art Glowing (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/ABS/filaments/abs_art_glowing/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-ABS-GLOWING.pdf. https://filamentfacts.com/brand/nebula/abs-art-glowing
- Nebula ABS Art Marble Gray (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/ABS/filaments/abs_art_marble_gray/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-ABS-MARBLE-GRAY.pdf. https://filamentfacts.com/brand/nebula/abs-art-marble-gray
- Nebula ABS Art Thermo (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/ABS/filaments/abs_art_thermo/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-ABS-THERMO.pdf. https://filamentfacts.com/brand/nebula/abs-art-thermo
- Nebula ABS Tech 702 (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/ABS/filaments/abs_tech_702/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2024/12/TDS-ABS-702.pdf. https://filamentfacts.com/brand/nebula/abs-tech-702
- Nebula ASA Tech 301 (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/ASA/filaments/asa_tech_301/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-ASA-301.pdf. https://filamentfacts.com/brand/nebula/asa-tech-301
- Nebula HIPS Tech 404 (HIPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/HIPS/filaments/hips_tech_404/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-HIPS-404.pdf. https://filamentfacts.com/brand/nebula/hips-tech-404
- Nebula PETG Art Chameleon (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PETG/filaments/petg_art_chameleon/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2024/12/TDS-PETG-CHAMELEON.pdf. https://filamentfacts.com/brand/nebula/petg-art-chameleon
- Nebula PETG Premium (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PETG/filaments/petg_premium/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2024/12/TDS-PETG.pdf. https://filamentfacts.com/brand/nebula/petg-premium
- Nebula PLA Art Glitter (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_art_glitter/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-GLITTER.pdf. https://filamentfacts.com/brand/nebula/pla-art-glitter
- Nebula PLA Art Glowing (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_art_glowing/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-GLOWING.pdf. https://filamentfacts.com/brand/nebula/pla-art-glowing
- Nebula PLA Art Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_art_marble/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-MARBLE-GRAY.pdf. https://filamentfacts.com/brand/nebula/pla-art-marble
- Nebula PLA Art Mystic Green (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_art_mystic_green/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-MYSTIC-GREEN.pdf. https://filamentfacts.com/brand/nebula/pla-art-mystic-green
- Nebula PLA Art Thermo (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_art_thermo/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-THERMOACTIVE.pdf. https://filamentfacts.com/brand/nebula/pla-art-thermo
- Nebula PLA Premium (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_premium/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2024/12/TDS-PLA.pdf. https://filamentfacts.com/brand/nebula/pla-premium
- Nebula PLA Premium Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_premium_silk/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/07/TDS-PLA-SILK-POL.pdf. https://filamentfacts.com/brand/nebula/pla-premium-silk
- Nebula PLA Tech 607 (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_tech_607/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-607.pdf. https://filamentfacts.com/brand/nebula/pla-tech-607
- Nebula PLA Tech 609 HD (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nebula/materials/PLA/filaments/pla_tech_609_hd/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://api.nebulafilaments.com/wp-content/uploads/2025/02/TDS-PLA-609-HD.pdf. https://filamentfacts.com/brand/nebula/pla-tech-609-hd
- Nexaforge PLA Basic (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nexaforge/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nexaforge/pla-basic
- NinjaTek Cheetah TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ninjatek/materials/TPU/filaments/cheetah_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ninjatek/cheetah-tpu
- NinjaTek Chinchilla TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ninjatek/materials/TPU/filaments/chinchilla_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ninjatek/chinchilla-tpu
- NinjaTek Edge TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ninjatek/materials/TPU/filaments/edge_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ninjatek/edge-tpu
- NinjaTek Glow TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ninjatek/materials/TPU/filaments/glow_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ninjatek/glow-tpu
- NinjaTek NinjaFlex TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ninjatek/materials/TPU/filaments/ninjaflex_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ninjatek/ninjaflex-tpu
- NinjaTek TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ninjatek/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ninjatek/tpu
- Nobufil ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/abs
- Nobufil ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/asa
- Nobufil Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ABS/filaments/glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/glow-abs
- Nobufil Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/glow-petg
- Nobufil Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/PETG/filaments/matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/matte-petg
- Nobufil PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/pctg
- Nobufil PCTG CF (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/PCTG/filaments/pctg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/pctg-cf
- Nobufil PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/petg
- Nobufil PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/petg-cf
- Nobufil PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/pla-cf
- Nobufil X Astro ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ABS/filaments/x_astro_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/x-astro-abs
- Nobufil X Candy ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ABS/filaments/x_candy_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/x-candy-abs
- Nobufil X CF CF ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ASA/filaments/x_cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/x-cf-cf-asa
- Nobufil X Industrial ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ABS/filaments/x_industrial_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/x-industrial-abs
- Nobufil X Matt Matte ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ABS/filaments/x_matt_matte_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/x-matt-matte-abs
- Nobufil X Neon ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/nobufil/materials/ABS/filaments/x_neon_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/nobufil/x-neon-abs
- Numakers Glow PLA (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/numakers/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/numakers/glow-pla
- Numakers PETG HS (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/numakers/materials/PLA/filaments/petg_hs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/numakers/petg-hs
- Numakers PLA Marble (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/numakers/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/numakers/pla-marble
- Numakers PLA Wood (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/numakers/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/numakers/pla-wood
- Numakers PLA-CF (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/numakers/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/numakers/pla-cf
- Numakers PLA+ (PLA+) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/numakers/materials/PLA/filaments/pla_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/numakers/pla-plus
- Numakers Silk PLA (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/numakers/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/numakers/silk-pla
- Overture ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/abs
- Overture ABS Basic (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/ABS/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/abs-basic
- Overture ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/asa
- Overture ASA Basic (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/ASA/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/asa-basic
- Overture Easy Nylon (PA6) has a recommended nozzle temperature of 245–260 °C and a recommended bed temperature of 50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PA6/filaments/easy_nylon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/easy-nylon
- Overture Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/ABS/filaments/abs_glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/glow-abs
- Overture Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/glow-pla
- Overture High Speed PETG Refill has no listed nozzle or bed temperature. It is not in the Open Filament Database dump dated 2026-10-13. The product page names a 1 kg refill and 1.75 mm filament. https://filamentfacts.com/brand/overture/high-speed-petg
- Overture High Speed PLA (PLA) lists a nozzle temperature of 190–220 °C, a bed temperature of 25–60 °C, drying at 50 °C for 7 h, and a print speed up to 300 mm/s, with the cooling fan turned on, according to the Overture product page (https://overture3d.com/products/overture-pla, checked 2026-10-14). Density and spool weight are not listed there. This product is not the Open Filament Database Overture PLA row. https://filamentfacts.com/brand/overture/high-speed-pla
- Overture High Speed TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/TPU/filaments/high_speed_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/high-speed-tpu
- Overture Luminous High Speed Glow TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/TPU/filaments/luminous_high_speed_glow_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/luminous-high-speed-glow-tpu
- Overture Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/matte-pla
- Overture PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pc
- Overture PC Professional (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PC/filaments/professional/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pc-professional
- Overture PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/petg
- Overture PETG Basic (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PETG/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/petg-basic
- Overture PETG Refill (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PETG/filaments/petg_refill/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/petg-refill
- Overture PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla
- Overture PLA Air (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/air/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-air
- Overture PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-cf
- Overture PLA Cream (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/cream/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-cream
- Overture PLA Easy (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/easy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-easy
- Overture PLA Easy Glow (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/easy_glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-easy-glow
- Overture PLA Plus (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/pla_plus/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-plus
- Overture PLA Professional (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/professional/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-professional
- Overture PLA Refill (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/pla_refill/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-refill
- Overture PLA Rock (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/pla_rock/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-rock
- Overture PLA Super (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/super/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-super
- Overture PLA Turbo Rapid (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/turbo_rapid/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/pla-turbo-rapid
- Overture Shimmer PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/shimmer_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/shimmer-pla
- Overture Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/silk-pla
- Overture TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/overture/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/overture/tpu
- OVV3D Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ovv3d/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ovv3d/matte-pla
- OVV3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ovv3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ovv3d/pla
- OVV3D Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ovv3d/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ovv3d/silk-pla
- Panchroma Basic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/basic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/basic-pla
- Panchroma Celestial PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/celestial_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/celestial-pla
- Panchroma Dual Matte PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/dual_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/dual-matte-pla
- Panchroma Dual Silk PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/dual_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/dual-silk-pla
- Panchroma Dual Special PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/dual_special_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/dual-special-pla
- Panchroma Galaxy PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/galaxy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/galaxy-pla
- Panchroma Glow PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/glow-pla
- Panchroma Gradient Galaxy (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/gradient_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/gradient-galaxy
- Panchroma Gradient Matte PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/gradient_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/gradient-matte-pla
- Panchroma Gradient Satin PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/gradient_satin_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/gradient-satin-pla
- Panchroma Gradient Translucent PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/gradient_translucent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/gradient-translucent-pla
- Panchroma Luminous PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/luminous_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/luminous-pla
- Panchroma Marble PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/marble-pla
- Panchroma Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/matte-pla
- Panchroma Metallic PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/metallic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/metallic-pla
- Panchroma Neon PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/neon_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/neon-pla
- Panchroma PET CoPE (PET) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PET/filaments/cope/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/pet-cope
- Panchroma PLA Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/pla-silk
- Panchroma Satin PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/satin_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/satin-pla
- Panchroma Starlight PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/starlight_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/starlight-pla
- Panchroma Temp Shift PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/temp_shift_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/temp-shift-pla
- Panchroma Translucent PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/translucent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/translucent-pla
- Panchroma UV Shift PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/panchroma/materials/PLA/filaments/uv_shift_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/panchroma/uv-shift-pla
- Paramount 3D ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/abs
- Paramount 3D ABS CF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/ABS/filaments/abs_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/abs-cf
- Paramount 3D ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/asa
- Paramount 3D Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/matte-pla
- Paramount 3D PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/pa6-cf
- Paramount 3D PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/petg
- Paramount 3D PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/petg-cf
- Paramount 3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/pla
- Paramount 3D PLA Flex (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PLA/filaments/flex/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/pla-flex
- Paramount 3D PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/pva
- Paramount 3D Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/silk-pla
- Paramount 3D TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/paramount_3d/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/paramount-3d/tpu
- Patron EG Marble PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 60–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/patron_eg/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/patron-eg/marble-pla
- Patron EG Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 60–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/patron_eg/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/patron-eg/matte-pla
- Patron EG PETG HS (PETG) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 75–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/patron_eg/materials/PETG/filaments/petg_hs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/patron-eg/petg-hs
- Patron EG PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 60–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/patron_eg/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/patron-eg/pla-plus
- Phrozen PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/phrozen/materials/PLA/filaments/pla_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/phrozen/pla
- Polar Filament ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polar_filament/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polar-filament/asa
- Polar Filament Biodegradable Flexible 95A Soft TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polar_filament/materials/TPU/filaments/biodegradable_flexible_95a_soft_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polar-filament/biodegradable-flexible-95a-soft-tpu
- Polar Filament Biodegradable Pha (PHA) has a recommended nozzle temperature of 195–210 °C and a recommended bed temperature of 0 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polar_filament/materials/PHA/filaments/biodegradable_pha/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polar-filament/biodegradable-pha
- Polar Filament PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polar_filament/materials/PA12/filaments/pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polar-filament/pa12
- Polar Filament PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polar_filament/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polar-filament/petg
- Polar Filament PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polar_filament/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polar-filament/pla
- Polar Filament TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polar_filament/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polar-filament/tpu
- PolyFlex TPU90 (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polyflex/materials/TPU/filaments/tpu90/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polyflex/tpu90
- PolyFlex TPU95 (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polyflex/materials/TPU/filaments/tpu95/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polyflex/tpu95
- PolyFlex TPU95-HF (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polyflex/materials/TPU/filaments/tpu95_hf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polyflex/tpu95-hf
- PolyLite ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/abs
- PolyLite ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/asa
- PolyLite CosPLA Version A (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PLA/filaments/cospla_version_a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/cospla-version-a
- PolyLite CosPLA Version B (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PLA/filaments/cospla_version_b/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/cospla-version-b
- PolyLite Galaxy ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/ABS/filaments/galaxy_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/galaxy-abs
- PolyLite Galaxy ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/ASA/filaments/galaxy_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/galaxy-asa
- PolyLite LW-PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PLA/filaments/lw_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/lw-pla
- PolyLite Metallic ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/ABS/filaments/metallic_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/metallic-abs
- PolyLite Metallic PLA Pro (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PLA/filaments/metallic_pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/metallic-pla-pro
- PolyLite Neon ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/ABS/filaments/neon_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/neon-abs
- PolyLite PC (PC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/pc
- PolyLite PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/petg
- PolyLite PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/pla
- PolyLite PLA Pro (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PLA/filaments/pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/pla-pro
- PolyLite PLA-CF (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/pla-cf
- PolyLite Translucent PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polylite/materials/PETG/filaments/translucent_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polylite/translucent-petg
- Polymaker ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/abs
- Polymaker ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/asa
- Polymaker CPE (CPE) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/CPE/filaments/cpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/cpe
- Polymaker Creator Special Edition PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/creator_special_edition_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/creator-special-edition-pla
- Polymaker Draft PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/draft_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/draft-pla
- Polymaker Dual Panchroma Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/dual_panchroma_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/dual-panchroma-matte-pla
- Polymaker For Production Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/for_production_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/for-production-matte-pla
- Polymaker Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/glow-pla
- Polymaker Gradient Panchroma PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/gradient_panchroma_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/gradient-panchroma-pla
- Polymaker HT PLA PRO (PLA) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 25–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/ht_pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/ht-pla-pro
- Polymaker HT-PLA (PLA) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/ht_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/ht-pla
- Polymaker HT-PLA-GF (PLA) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/ht_pla_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/ht-pla-gf
- Polymaker LW PolyLite PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/lw_polylite_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/lw-polylite-pla
- Polymaker Metallic PolyLite PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/metallic_polylite_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/metallic-polylite-pla
- Polymaker Metallic Polylite Silk ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/ABS/filaments/metallic_polylite_silk_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/metallic-polylite-silk-abs
- Polymaker Metallic Polylite Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/metallic_polylite_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/metallic-polylite-silk-pla
- Polymaker Muted Panchroma Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/muted_panchroma_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/muted-panchroma-matte-pla
- Polymaker Neon Panchroma PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/neon_panchroma_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/neon-panchroma-pla
- Polymaker PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pa12-cf
- Polymaker PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pa6-cf
- Polymaker PA6 GF (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PA6/filaments/gf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pa6-gf
- Polymaker Panchroma CoPE has no listed nozzle or bed temperature. It is not in the Open Filament Database dump dated 2026-10-13. CoPE is the material named on the retailer page. Diameter, colors, and a datasheet are not listed. https://filamentfacts.com/brand/polymaker/panchroma-cope
- Polymaker Panchroma Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/panchroma_glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/panchroma-glow-pla
- Polymaker Panchroma PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/panchroma_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/panchroma-pla
- Polymaker Panchroma Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/panchroma_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/panchroma-silk-pla
- Polymaker PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pc
- Polymaker PC-ABS (PC) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 90–105 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PC/filaments/pc_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pc-abs
- Polymaker PC-PBT (PC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PC/filaments/pc_pbt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pc-pbt
- Polymaker PET CF (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PET/filaments/cf_pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pet-cf
- Polymaker PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/petg
- Polymaker PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/petg-cf
- Polymaker PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pla
- Polymaker PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pla-cf
- Polymaker PLA PolyCast (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 25–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polycast/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pla-polycast
- Polymaker Polyflex 95 Hf High Speed TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/TPU/filaments/polyflex_95_hf_high_speed_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polyflex-95-hf-high-speed-tpu
- Polymaker Polyflex TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/TPU/filaments/polyflex_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polyflex-tpu
- Polymaker Polylite ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/ABS/filaments/polylite_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polylite-abs
- Polymaker Polylite ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/ASA/filaments/polylite_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polylite-asa
- Polymaker Polylite PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PC/filaments/polylite_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polylite-pc
- Polymaker Polylite PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PETG/filaments/polylite_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polylite-petg
- Polymaker Polylite PLA (PLA) lists a nozzle temperature of 190–230 °C, a bed temperature of 25–60 °C, a print speed of 40–60 mm/s, and drying at 55 °C for 6 h, according to the Polymaker US product page (https://us.polymaker.com/products/polylite-pla, checked 2026-10-14). The properties table lists density 1.17 g/cm³; the page copy says 1.19 g/cm³. The Open Filament Database record listed a bed of 50–70 °C and density 1.24 (dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polylite-pla
- Polymaker Polylite PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polylite_cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polylite-pla-cf
- Polymaker Polymaker PLA Pro (PLA) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polymaker_pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polymaker-pla-pro
- Polymaker Polymax PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PC/filaments/polymax_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polymax-pc
- Polymaker Polymax PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PETG/filaments/polymax_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polymax-petg
- Polymaker PolyMax PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polymax_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polymax-pla
- Polymaker Polymide Copa PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PA6/filaments/polymide_copa_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polymide-copa-pa6
- Polymaker PolySmooth (PVB) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 25–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PVB/filaments/polysmooth_pvb/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polysmooth
- Polymaker Polysonic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/polysonic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polysonic-pla
- Polymaker PolySupport for PLA (PVA) has a recommended nozzle temperature of 220–230 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PVA/filaments/polysupport_for_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/polysupport-for-pla
- Polymaker PPS CF (PPS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PPS/filaments/cf_pps/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pps-cf
- Polymaker PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pva
- Polymaker PVA PolyDissolve S1 (PVA) has a recommended nozzle temperature of 215–225 °C and a recommended bed temperature of 25–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PVA/filaments/polydissolve_s1/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pva-polydissolve-s1
- Polymaker PVA PolySupport for PA12 (PVA) has a recommended nozzle temperature of 270–300 °C and a recommended bed temperature of 50–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PVA/filaments/polysupport_for_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pva-polysupport-for-pa12
- Polymaker PVB (PVB) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PVB/filaments/pvb/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/pvb
- Polymaker Satin Panchroma PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/satin_panchroma_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/satin-panchroma-pla
- Polymaker Silk ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/ABS/filaments/silk_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/silk-abs
- Polymaker Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/silk-pla
- Polymaker Wood PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymaker/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymaker/wood-pla
- PolyMide PA6 CoPa (PA6) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 25–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polymide/materials/PA6/filaments/copa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polymide/pa6-copa
- PolySonic PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polysonic/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polysonic/pla
- PolySonic PLA Pro (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/polysonic/materials/PLA/filaments/pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/polysonic/pla-pro
- Precision 3D Filament Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/precision_3d_filament/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/precision-3d-filament/glow-pla
- Precision 3D Filament PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/precision_3d_filament/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/precision-3d-filament/pla
- PrimaCreator ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/abs
- PrimaCreator ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/asa
- PrimaCreator BVOH (BVOH) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/BVOH/filaments/bvoh/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/bvoh
- PrimaCreator Easyprint Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/easyprint_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/easyprint-matte-pla
- PrimaCreator Easyprint PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PETG/filaments/easyprint_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/easyprint-petg
- PrimaCreator Easyprint PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/easyprint_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/easyprint-pla
- PrimaCreator Flame Retardant PrimaSelect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/flame_retardant_primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/flame-retardant-primaselect-pla
- PrimaCreator Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/ABS/filaments/glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/glow-abs
- PrimaCreator Gradient PrimaSelect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/gradient_primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/gradient-primaselect-pla
- PrimaCreator High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/high-speed-pla
- PrimaCreator Marble PrimaSelect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/marble_primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/marble-primaselect-pla
- PrimaCreator Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/matte-pla
- PrimaCreator Metal Shine PrimaSelect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/metal_shine_primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/metal-shine-primaselect-pla
- PrimaCreator Metal Shine Primaselect Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/metal_shine_primaselect_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/metal-shine-primaselect-silk-pla
- PrimaCreator Nylonpower Glass Primaselect GF PA12 (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA12/filaments/nylonpower_glass_primaselect_gf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/nylonpower-glass-primaselect-gf-pa12
- PrimaCreator Nylonpower PA Primaselect PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA6/filaments/nylonpower_pa_primaselect_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/nylonpower-pa-primaselect-pa6
- PrimaCreator PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pa12-cf
- PrimaCreator PA12 GF (PA12) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA12/filaments/gf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pa12-gf
- PrimaCreator PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pa6
- PrimaCreator PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pa6-cf
- PrimaCreator Pastel PrimaSelect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/pastel_primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pastel-primaselect-pla
- PrimaCreator PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pc
- PrimaCreator PC CF (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PC/filaments/cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pc-cf
- PrimaCreator PEEK (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEEK/filaments/peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/peek
- PrimaCreator PEEK CF (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEEK/filaments/cf_peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/peek-cf
- PrimaCreator PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEI/filaments/pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pei
- PrimaCreator PEKK (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEKK/filaments/pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pekk
- PrimaCreator PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/petg
- PrimaCreator PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pla
- PrimaCreator PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pla-cf
- PrimaCreator PPSU (PPSU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PPSU/filaments/ppsu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/ppsu
- PrimaCreator Primaselect ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/ABS/filaments/primaselect_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-abs
- PrimaCreator Primaselect BVOH (BVOH) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/BVOH/filaments/primaselect_bvoh/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-bvoh
- PrimaCreator Primaselect Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/ABS/filaments/primaselect_glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-glow-abs
- PrimaCreator Primaselect Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/primaselect_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-matte-pla
- PrimaCreator Primaselect PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA12/filaments/primaselect_cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pa12-cf
- PrimaCreator Primaselect PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PA6/filaments/primaselect_cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pa6-cf
- PrimaCreator Primaselect PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PC/filaments/primaselect_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pc
- PrimaCreator Primaselect PC CF (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PC/filaments/primaselect_cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pc-cf
- PrimaCreator Primaselect PEEK (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEEK/filaments/primaselect_peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-peek
- PrimaCreator Primaselect PEEK CF (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEEK/filaments/primaselect_cf_peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-peek-cf
- PrimaCreator Primaselect PEKK (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEKK/filaments/primaselect_pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pekk
- PrimaCreator Primaselect PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PETG/filaments/primaselect_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-petg
- PrimaCreator Primaselect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pla
- PrimaCreator Primaselect PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/primaselect_cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pla-cf
- PrimaCreator Primaselect PPSU (PPSU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PPSU/filaments/primaselect_ppsu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-ppsu
- PrimaCreator Primaselect PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PVA/filaments/primaselect_pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-pva
- PrimaCreator Primaselect TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/TPU/filaments/primaselect_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primaselect-tpu
- PrimaCreator Primavalue ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/ABS/filaments/primavalue_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primavalue-abs
- PrimaCreator Primavalue High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/primavalue_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primavalue-high-speed-pla
- PrimaCreator Primavalue Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/primavalue_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primavalue-matte-pla
- PrimaCreator Primavalue PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PETG/filaments/primavalue_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primavalue-petg
- PrimaCreator Primavalue PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/primavalue_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/primavalue-pla
- PrimaCreator PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/pva
- PrimaCreator Satin PrimaSelect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/satin_primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/satin-primaselect-pla
- PrimaCreator Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/silk-pla
- PrimaCreator Sparkle PrimaSelect PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PLA/filaments/sparkle_primaselect_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/sparkle-primaselect-pla
- PrimaCreator TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/tpu
- PrimaCreator Ultem Primaselect PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primacreator/materials/PEI/filaments/ultem_primaselect_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primacreator/ultem-primaselect-pei
- PrimaSelect ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/abs
- PrimaSelect ASA+ (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/ASA/filaments/asa+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/asa-plus
- PrimaSelect PA6 NylonPower (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PA6/filaments/nylonpower/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pa6-nylonpower
- PrimaSelect PA6 NylonPower Glass Fibre (PA6) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PA6/filaments/nylonpower_glass_fibre/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pa6-nylonpower-glass-fibre
- PrimaSelect PETG CARBON (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PETG/filaments/carbon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/petg-carbon
- PrimaSelect PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pla
- PrimaSelect PLA Glossy (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/pla_glossy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pla-glossy
- PrimaSelect PLA Matt (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/pla_matt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pla-matt
- PrimaSelect PLA METAL (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pla-metal
- PrimaSelect PLA PRO (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/pla_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pla-pro
- PrimaSelect PLA Satin (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/pla_satin/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pla-satin
- PrimaSelect PLA Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pla-wood
- PrimaSelect PP (PP) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pp
- PrimaSelect PVA+ (PVA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PVA/filaments/pva+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/pva-plus
- PrimaSelect Solid PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PETG/filaments/solid_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/solid-petg
- PrimaSelect Tough PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/PLA/filaments/tough_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/tough-pla
- PrimaSelect TPU Flex (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primaselect/materials/TPU/filaments/flex/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primaselect/tpu-flex
- PrimaValue ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primavalue/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primavalue/abs
- PrimaValue PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primavalue/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primavalue/pla
- PrimaValue PLA+ (PLA+) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 75–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/primavalue/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/primavalue/pla-plus
- Print With Smile ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/abs
- Print With Smile ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/asa
- Print With Smile Bicolor Metallic PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PETG/filaments/bicolor_metallic_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/bicolor-metallic-petg
- Print With Smile PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/pa12-cf
- Print With Smile PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/petg
- Print With Smile PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/petg-cf
- Print With Smile PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/pla
- Print With Smile PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/pla-cf
- Print With Smile RE PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PETG/filaments/re_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/re-petg
- Print With Smile Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/print_with_smile/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/print-with-smile/silk-pla
- PrintedSolid ABS CF (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/ABS/filaments/cf_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/abs-cf
- PrintedSolid Bicolor Magic Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/bicolor_magic_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/bicolor-magic-silk-pla
- PrintedSolid Elixir Jessie Premium Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/elixir_jessie_premium_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/elixir-jessie-premium-silk-pla
- PrintedSolid Elixir Jessie Premium Silk TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/TPU/filaments/elixir_jessie_premium_silk_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/elixir-jessie-premium-silk-tpu
- PrintedSolid Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/glow-pla
- PrintedSolid Gradient Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/gradient_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/gradient-silk-pla
- PrintedSolid Jessie Premium PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PETG/filaments/jessie_premium_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/jessie-premium-petg
- PrintedSolid Jessie Premium PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/jessie_premium_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/jessie-premium-pla
- PrintedSolid Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/matte-pla
- PrintedSolid PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/petg
- PrintedSolid PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/petg-cf
- PrintedSolid PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/pla
- PrintedSolid PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/pla-cf
- PrintedSolid Rainbow Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/rainbow_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/rainbow-silk-pla
- PrintedSolid Shiny Gradient Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/shiny_gradient_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/shiny-gradient-silk-pla
- PrintedSolid Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/silk-pla
- PrintedSolid Silk TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/TPU/filaments/silk_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/silk-tpu
- PrintedSolid TPU PS Imports (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/TPU/filaments/ps_imports/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/tpu-ps-imports
- PrintedSolid TriColor Magic Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/printedsolid/materials/PLA/filaments/tricolor_magic_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/printedsolid/tricolor-magic-silk-pla
- Professional LAB ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/abs
- Professional LAB ASA (ASA) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/asa
- Professional LAB HS-PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/hs_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/hs-pla
- Professional LAB PA12-CF15 (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PA12/filaments/pa12_cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pa12-cf15
- Professional LAB PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/petg
- Professional LAB PETG Matte (PETG) has a recommended nozzle temperature of 240–255 °C and a recommended bed temperature of 75–85 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PETG/filaments/petg_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/petg-matte
- Professional LAB PETG Transparent (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PETG/filaments/petg_transparent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/petg-transparent
- Professional LAB PETG-CF (PETG) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 60–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/petg-cf
- Professional LAB PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla
- Professional LAB PLA Galaxy (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-galaxy
- Professional LAB PLA Glow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-glow
- Professional LAB PLA Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-marble
- Professional LAB PLA Matte (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-matte
- Professional LAB PLA Meta (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_meta/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-meta
- Professional LAB PLA Pastel (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_pastel/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-pastel
- Professional LAB PLA Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-silk
- Professional LAB PLA Silk Dual (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_silk_dual/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-silk-dual
- Professional LAB PLA Silk Tri (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_silk_tri/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-silk-tri
- Professional LAB PLA Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-wood
- Professional LAB PLA-CF (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-cf
- Professional LAB PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/pla-plus
- Professional LAB TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/professional_lab/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/professional-lab/tpu
- Prografen PETG Graphene Light (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prografen/materials/PETG/filaments/graphene_light/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prografen/petg-graphene-light
- Prografen PETG Graphene Strong (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prografen/materials/PETG/filaments/graphene_strong/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prografen/petg-graphene-strong
- Prografen PLA Graphene Light (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prografen/materials/PLA/filaments/graphene_light/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prografen/pla-graphene-light
- Prografen PLA Graphene Strong (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prografen/materials/PLA/filaments/graphene_strong/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prografen/pla-graphene-strong
- Proteor Print CPX-KyronMax (PP) has a recommended nozzle temperature of at most 310 °C and a recommended bed temperature of at most 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/proteor_print/materials/PP/filaments/cpx_kyronmax/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/proteor-print/cpx-kyronmax
- Proteor Print CPX-PP (PP) has a recommended nozzle temperature of at most 260 °C and a recommended bed temperature of at most 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/proteor_print/materials/PP/filaments/cpx_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/proteor-print/cpx-pp
- Proteor Print EVA-FORM (EVA) has a recommended nozzle temperature of at most 240 °C and a recommended bed temperature of at most 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/proteor_print/materials/EVA/filaments/eva_form/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/proteor-print/eva-form
- Proteor Print EVA+ (EVA) has a recommended nozzle temperature of at most 265 °C and a recommended bed temperature of at most 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/proteor_print/materials/EVA/filaments/eva+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/proteor-print/eva-plus
- Proteor Print PETG (PETG) has a recommended nozzle temperature of at most 260 °C and a recommended bed temperature of at most 90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/proteor_print/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/proteor-print/petg
- Protopasta Basic PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/basic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/basic-pla
- Protopasta Conductive PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/conductive_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/conductive-pla
- Protopasta Fiber HT Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/fiber_ht_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/fiber-ht-matte-pla
- Protopasta Fluorescent PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/fluorescent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/fluorescent-pla
- Protopasta Glitter PETG (PETG) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/glitter_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/glitter-petg
- Protopasta Glitter PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/glitter_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/glitter-pla
- Protopasta Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/glow-pla
- Protopasta High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/high-speed-pla
- Protopasta Iron Metal Composite PLA (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/iron_metal_composite_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/iron-metal-composite-pla
- Protopasta Marble PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/marble-pla
- Protopasta Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/matte-pla
- Protopasta Metal Composite PLA (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/metal_composite_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/metal-composite-pla
- Protopasta Metallic PETG (PETG) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/metallic_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/metallic-petg
- Protopasta Metallic PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/metallic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/metallic-pla
- Protopasta Multicolor PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/multicolor_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/multicolor-pla
- Protopasta Nebula PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/nebula_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/nebula-pla
- Protopasta Opaque PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/opaque_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/opaque-pla
- Protopasta Pearl PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/pearl_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/pearl-pla
- Protopasta PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/petg
- Protopasta PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/petg-cf
- Protopasta PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/pla
- Protopasta PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/pla-cf
- Protopasta PLA Green Glow-in-the-Dark (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/green_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/pla-green-glow-in-the-dark
- Protopasta Recycled PETG (PETG) has a recommended nozzle temperature of 235–275 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/recycled_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/recycled-petg
- Protopasta Recycled PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/recycled_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/recycled-pla
- Protopasta Satin PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/satin_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/satin-pla
- Protopasta Silk PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/silk_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/silk-petg
- Protopasta Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/silk-pla
- Protopasta Simply PETG (PETG) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/simply_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/simply-petg
- Protopasta Stainless Steel Metal Composite PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/stainless_steel_metal_composite_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/stainless-steel-metal-composite-pla
- Protopasta Static Dissipative Carbon Fiber PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/static_dissipative_cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/static-dissipative-carbon-fiber-pla
- Protopasta Static Dissipative PETG (PETG) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/static_dissipative_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/static-dissipative-petg
- Protopasta Static Dissipative PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/static_dissipative_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/static-dissipative-pla
- Protopasta Steel Metal Composite PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/steel_metal_composite_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/steel-metal-composite-pla
- Protopasta Still Colorful Recycled PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/still_colorful_recycled_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/still-colorful-recycled-pla
- Protopasta Thermochromic PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/thermochromic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/thermochromic-pla
- Protopasta TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/TPE/filaments/tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/tpe
- Protopasta TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/tpu
- Protopasta Translucent PETG (PETG) has a recommended nozzle temperature of 200–220 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PETG/filaments/translucent_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/translucent-petg
- Protopasta Translucent PLA (PLA) has a recommended nozzle temperature of 195–225 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/protopasta/materials/PLA/filaments/translucent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/protopasta/translucent-pla
- Prusament ASA (ASA) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/asa
- Prusament Blend Silk PLA (PLA) has a recommended nozzle temperature of 205–225 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PLA/filaments/blend_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/blend-silk-pla
- Prusament Matte PETG (PETG) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PETG/filaments/matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/matte-petg
- Prusament Mystic Premium PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PLA/filaments/mystic_premium_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/mystic-premium-pla
- Prusament PA11-CF (PA/CF) has a recommended nozzle temperature of 275–295 °C and a recommended bed temperature of 95–115 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PA11/filaments/pa11_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pa11-cf
- Prusament PC (PC) has a recommended nozzle temperature of 265–285 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pc
- Prusament PC Blend (PC) has a recommended nozzle temperature of 265–285 °C and a recommended bed temperature of 100–120 °C, according to SpoolmanDB (file https://github.com/Donkie/SpoolmanDB/blob/8f1a99f9cda7a58ca3118d6bd28c707647caa3db/filaments/prusament.json; commit 8f1a99f9cda7; dataset verified date 2026-09-12). https://filamentfacts.com/brand/prusament/pc-blend
- Prusament PC-CF (PC) has a recommended nozzle temperature of 275–295 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PC/filaments/pc_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pc-cf
- Prusament PEI (PEI) has a recommended nozzle temperature of 400–420 °C and a recommended bed temperature of 140–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PEI/filaments/pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pei
- Prusament PEI 1010 (PEI) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PEI/filaments/pei_1010/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pei-1010
- Prusament PETG (PETG) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/petg
- Prusament PETG CF (PETG) has a recommended nozzle temperature of 255–275 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/petg-cf
- Prusament PETG Magnetite (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PETG/filaments/petg_magnetite/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/petg-magnetite
- Prusament PETG Tungsten (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PETG/filaments/petg_tungsten/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/petg-tungsten
- Prusament PETG V0 (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PETG/filaments/petg_v0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/petg-v0
- Prusament PLA (PLA) has a recommended nozzle temperature of 205–225 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pla
- Prusament PLA Recycled (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PLA/filaments/pla_recycled/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pla-recycled
- Prusament PLA Woodfill (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PLA/filaments/woodfill/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pla-woodfill
- Prusament PP-CF (PP) has a recommended nozzle temperature of 260–280 °C and a recommended bed temperature of 65–85 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PP/filaments/pp_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pp-cf
- Prusament PP-GF (PP) has a recommended nozzle temperature of 240–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PP/filaments/pp_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pp-gf
- Prusament PVB (PVB) has a recommended nozzle temperature of 205–225 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PVB/filaments/pvb/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/pvb
- Prusament rPLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/PLA/filaments/rpla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/rpla
- Prusament TPU 95A (TPU) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 55–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/prusament/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/prusament/tpu-95a
- Push Plastic ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/abs
- Push Plastic ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/asa
- Push Plastic CF ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/ABS/filaments/cf_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/cf-abs
- Push Plastic High Heat PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PLA/filaments/high_heat_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/high-heat-pla
- Push Plastic HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/hips
- Push Plastic Matte ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/ABS/filaments/matte_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/matte-abs
- Push Plastic PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/pc
- Push Plastic PC CF (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PC/filaments/cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/pc-cf
- Push Plastic PC PBT (PBT) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PBT/filaments/pc_pbt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/pc-pbt
- Push Plastic PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/pctg
- Push Plastic PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PEI/filaments/pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/pei
- Push Plastic PEI 1010 (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PEI/filaments/pei_1010/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/pei-1010
- Push Plastic PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/petg
- Push Plastic PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/petg-cf
- Push Plastic PMMA (PMMA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/PMMA/filaments/pmma/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/pmma
- Push Plastic TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/push_plastic/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/push-plastic/tpu
- QIDI Tech ABS Metal Rapido (ABS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/ABS/filaments/metal_rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/abs-metal-rapido
- QIDI Tech ABS Rapido (ABS) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/ABS/filaments/rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/abs-rapido
- QIDI Tech ABS-GF25 (ABS) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/ABS/filaments/gf25/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/abs-gf25
- QIDI Tech ASA (ASA) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/asa
- QIDI Tech ASA-Aero (ASA) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 80–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/ASA/filaments/aero/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/asa-aero
- QIDI Tech Odorless ABS Rapido (ABS) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/ABS/filaments/odorless_rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/odorless-abs-rapido
- QIDI Tech PA12 S-White Support (PA12) has a recommended nozzle temperature of 280–300 °C and a recommended bed temperature of 40–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PA12/filaments/s_white_support/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pa12-s-white-support
- QIDI Tech PA12-CF (PA/CF) has a recommended nozzle temperature of 280–300 °C and a recommended bed temperature of 40–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PA12/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pa12-cf
- QIDI Tech PAHT-CF (PPA) has a recommended nozzle temperature of 300–320 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PPA/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/paht-cf
- QIDI Tech PAHT-GF (PPA) has a recommended nozzle temperature of 300–320 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PPA/filaments/gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/paht-gf
- QIDI Tech PC/ABS-FR (PC) has a recommended nozzle temperature of 260–280 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PC/filaments/abs_fr/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pc-abs-fr
- QIDI Tech PEBA 95A (PEBA) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 35–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PEBA/filaments/95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/peba-95a
- QIDI Tech PET-CF (PET) has a recommended nozzle temperature of 280–320 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PET/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pet-cf
- QIDI Tech PET-GF (PET) has a recommended nozzle temperature of 260–320 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PET/filaments/gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pet-gf
- QIDI Tech PETG Basic (PETG) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PETG/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/petg-basic
- QIDI Tech PETG Rapido (PETG) has a recommended nozzle temperature of 240–275 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PETG/filaments/rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/petg-rapido
- QIDI Tech PETG Translucent (PETG) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PETG/filaments/translucent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/petg-translucent
- QIDI Tech PETG-CF (PETG) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PETG/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/petg-cf
- QIDI Tech PETG-GF (PETG) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PETG/filaments/gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/petg-gf
- QIDI Tech PETG-Tough (PETG) has a recommended nozzle temperature of 240–280 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PETG/filaments/petg_tough/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/petg-tough
- QIDI Tech PLA Basic (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-basic
- QIDI Tech PLA Matte Basic (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/matte_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-matte-basic
- QIDI Tech PLA Matte Rapido (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/matte_rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-matte-rapido
- QIDI Tech PLA Metal Rapido (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/metal_rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-metal-rapido
- QIDI Tech PLA Rapido (PLA) has a recommended nozzle temperature of 200–240 °C and a recommended bed temperature of 35–55 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-rapido
- QIDI Tech PLA Silk Rapido (PLA) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/silk_rapido/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-silk-rapido
- QIDI Tech PLA Wood (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-wood
- QIDI Tech PLA-CF (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PLA/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pla-cf
- QIDI Tech PPS-CF (PPS) has a recommended nozzle temperature of 310–350 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PPS/filaments/cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pps-cf
- QIDI Tech PPS-GF20 (PPS) has a recommended nozzle temperature of 300–350 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PPS/filaments/gf20/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/pps-gf20
- QIDI Tech TPU 95A HF (TPU) has a recommended nozzle temperature of 220–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/TPU/filaments/95a_hf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/tpu-95a-hf
- QIDI Tech TPU-Aero (TPU) has a recommended nozzle temperature of 230–270 °C and a recommended bed temperature of 30–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/TPU/filaments/aero/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/tpu-aero
- QIDI Tech UltraPA (PPA) has a recommended nozzle temperature of 260–280 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PPA/filaments/ultrapa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/ultrapa
- QIDI Tech UltraPA-CF25 (PPA) has a recommended nozzle temperature of 300–340 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/qidi_tech/materials/PPA/filaments/cf25/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/qidi-tech/ultrapa-cf25
- Recreus Balena Filaflex TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/balena_filaflex_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/balena-filaflex-tpu
- Recreus Conductive Filaflex TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/conductive_filaflex_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/conductive-filaflex-tpu
- Recreus Filaflex TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/filaflex_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/filaflex-tpu
- Recreus PET G Hf High Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/PETG/filaments/pet_g_hf_high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/pet-g-hf-high-speed-petg
- Recreus PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/petg
- Recreus PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/petg-cf
- Recreus PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/pla
- Recreus PP (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/pp
- Recreus PP 3D (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/PP/filaments/3d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/pp-3d
- Recreus PP GF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/PP/filaments/pp_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/pp-gf
- Recreus Sebs Filaflex TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPE/filaments/sebs_filaflex_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/sebs-filaflex-tpe
- Recreus TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPE/filaments/tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/tpe
- Recreus TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/tpu
- Recreus TPU FilaFlex 60A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/filaflex_60a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/tpu-filaflex-60a
- Recreus TPU FilaFlex 70A Ultra Soft (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/filaflex_70a_ultra_soft/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/tpu-filaflex-70a-ultra-soft
- Recreus TPU FilaFlex 82A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/filaflex_82a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/tpu-filaflex-82a
- Recreus TPU FilaFlex 95 Foamy (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/filaflex_95_foamy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/tpu-filaflex-95-foamy
- Recreus TPU FilaFlex 95A Medium Flex (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recreus/materials/TPU/filaments/filaflex_95a_medium_flex/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recreus/tpu-filaflex-95a-medium-flex
- RecyclingFabrik Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recyclingfabrik/matte-pla
- RecyclingFabrik PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recyclingfabrik/petg
- RecyclingFabrik PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recyclingfabrik/pla
- RecyclingFabrik Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/recyclingfabrik/silk-pla
- Renkforce PETG (PETG) has a recommended nozzle temperature of 230–270 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/renkforce/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/renkforce/petg
- ROSA3D Filaments 10Gf GF PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PCTG/filaments/10gf_gf_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/10gf-gf-pctg
- ROSA3D Filaments ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/abs
- ROSA3D Filaments ABS V0 FR (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/ABS/filaments/v0_fr/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/abs-v0-fr
- ROSA3D Filaments ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/asa
- ROSA3D Filaments ASA 5Kevlar (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/ASA/filaments/5kevlar/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/asa-5kevlar
- ROSA3D Filaments ASA CF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/ASA/filaments/cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/asa-cf
- ROSA3D Filaments ASA GF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/ASA/filaments/gf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/asa-gf
- ROSA3D Filaments Galaxy PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/galaxy_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/galaxy-pla
- ROSA3D Filaments Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/glow-pla
- ROSA3D Filaments Glow TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/TPU/filaments/glow_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/glow-tpu
- ROSA3D Filaments High Speed Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/high_speed_glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/high-speed-glow-petg
- ROSA3D Filaments High Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/high-speed-petg
- ROSA3D Filaments Impact Abrasive Uv H2O Microbe Resistant ROSA TPU HardTech+ 83D (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/TPU/filaments/impact_abrasive_uv_h2o_microbe_resistant_rosa_tpu_hardtech_83d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/impact-abrasive-uv-h2o-microbe-resistant-rosa-tpu-hardtech-plus-83d
- ROSA3D Filaments LW AERO PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/lw_aero_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/lw-aero-pla
- ROSA3D Filaments Magic PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/magic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/magic-pla
- ROSA3D Filaments Magic Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/magic_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/magic-silk-pla
- ROSA3D Filaments Matte ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/ABS/filaments/matte_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/matte-abs
- ROSA3D Filaments Matte PC CF (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PC/filaments/matte_cf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/matte-pc-cf
- ROSA3D Filaments Matte PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/matte_cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/matte-petg-cf
- ROSA3D Filaments Matte PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/matte_cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/matte-pla-cf
- ROSA3D Filaments Multicolour Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/multicolour_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/multicolour-silk-pla
- ROSA3D Filaments PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pa12-cf
- ROSA3D Filaments Pastel PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/pastel_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pastel-pla
- ROSA3D Filaments PBT 15Gf HT UV Impact GF PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PC/filaments/pbt_15gf_ht_uv_impact_gf_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pbt-15gf-ht-uv-impact-gf-pc
- ROSA3D Filaments PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pc
- ROSA3D Filaments PCTG (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PCTG/filaments/pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pctg
- ROSA3D Filaments PCTG CF (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PCTG/filaments/cf_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pctg-cf
- ROSA3D Filaments Pet G Galaxy Hs PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/pet_g_galaxy_hs_high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pet-g-galaxy-hs-petg
- ROSA3D Filaments Pet G Hs PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/pet_g_hs_high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pet-g-hs-petg
- ROSA3D Filaments Pet G Structure Hs PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/pet_g_structure_hs_high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pet-g-structure-hs-petg
- ROSA3D Filaments PET-G MDT (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/pet_g_mdt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pet-g-mdt
- ROSA3D Filaments PET-G Standard Neon Green Glow in the Dark (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/pet_g_standard_neon_green_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pet-g-standard-neon-green-glow-in-the-dark
- ROSA3D Filaments PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/petg
- ROSA3D Filaments PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/petg-cf
- ROSA3D Filaments PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pla
- ROSA3D Filaments PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pla-cf
- ROSA3D Filaments PLA Starter Neon Green Glow in the Dark (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/pla_starter_neon_green_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pla-starter-neon-green-glow-in-the-dark
- ROSA3D Filaments Plus ProSpeed Impact PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/plus_prospeedimpact_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/plus-prospeed-impact-pla
- ROSA3D Filaments PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pva
- ROSA3D Filaments PVA 2 (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PVA/filaments/2/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/pva-2
- ROSA3D Filaments Rainbow Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/rainbow_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/rainbow-silk-pla
- ROSA3D Filaments ReFill PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/refill_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/refill-pla
- ROSA3D Filaments ReFill Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/refill_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/refill-silk-pla
- ROSA3D Filaments Rosa Flex Glow TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/TPU/filaments/rosa_flex_glow_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/rosa-flex-glow-tpu
- ROSA3D Filaments Rosa Flex TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/TPU/filaments/rosa_flex_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/rosa-flex-tpu
- ROSA3D Filaments Rosa Tpu Automotive 15 Glass Fiber (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/TPU/filaments/rosa_tpu_automotive_15_glass_fiber/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/rosa-tpu-automotive-15-glass-fiber
- ROSA3D Filaments ROSA TPU HardTech+ 83D (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/TPU/filaments/rosa_tpu_hardtech_83d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/rosa-tpu-hardtech-plus-83d
- ROSA3D Filaments Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/silk-pla
- ROSA3D Filaments Speed Matt Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/speed_matt_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/speed-matt-matte-pla
- ROSA3D Filaments Starter PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/PLA/filaments/starter_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/starter-pla
- ROSA3D Filaments TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/rosa3d_filaments/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/rosa3d-filaments/tpu
- SainSmart ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/abs
- SainSmart ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/ASA/filaments/high_speed_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/asa
- SainSmart ASA CF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/ASA/filaments/cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/asa-cf
- SainSmart Flexible 87A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/flexible_87a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/flexible-87a-tpu
- SainSmart Flexible 95A Gt 3 TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/flexible_95a_gt_3_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/flexible-95a-gt-3-tpu
- SainSmart Flexible 95A Matte TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/flexible_95a_matte_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/flexible-95a-matte-tpu
- SainSmart Flexible Tpu (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/flexible_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/flexible-tpu
- SainSmart Glossy Gt 3 Silk High Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PETG/filaments/glossy_gt_3_silk_high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/glossy-gt-3-silk-high-speed-petg
- SainSmart Glossy Gt 3 Silk High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/glossy_gt_3_silk_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/glossy-gt-3-silk-high-speed-pla
- SainSmart Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/glow-petg
- SainSmart Gt 3 ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/ASA/filaments/gt_3_high_speed_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/gt-3-asa
- SainSmart Gt 3 High Speed TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/gt_3_high_speed_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/gt-3-high-speed-tpu
- SainSmart Gt 3 Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/gt_3_matte_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/gt-3-matte-pla
- SainSmart Gt 3 TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/gt_3_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/gt-3-tpu
- SainSmart High Flowability Flexible Gt 3 PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/high_flowability_flexible_gt_3_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/high-flowability-flexible-gt-3-pla
- SainSmart High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/high-speed-pla
- SainSmart High Speed TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/high_speed_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/high-speed-tpu
- SainSmart Lite Gt 3 High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/lite_gt_3_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/lite-gt-3-high-speed-pla
- SainSmart Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/matte_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/matte-pla
- SainSmart Matte TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/matte_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/matte-tpu
- SainSmart Neon Cyberpunk Color TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/neon_cyberpunk_color_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/neon-cyberpunk-color-tpu
- SainSmart PA12 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PA12/filaments/cf_pa12/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/pa12-cf
- SainSmart PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/pa6
- SainSmart PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/pa6-cf
- SainSmart Pastel 92A Flexible TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/pastel_92a_flexible_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/pastel-92a-flexible-tpu
- SainSmart PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/petg
- SainSmart PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/petg-cf
- SainSmart PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/pla
- SainSmart PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/pva
- SainSmart Silk PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PETG/filaments/silk_high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/silk-petg
- SainSmart Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/PLA/filaments/silk_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/silk-pla
- SainSmart Small Spool Flexible TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/small_spool_flexible_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/small-spool-flexible-tpu
- SainSmart Temperature Sensitive Flexible 95A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/temperature_sensitive_flexible_95a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/temperature-sensitive-flexible-95a-tpu
- SainSmart TPU Liquid Luster (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/liquid_luster/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/tpu-liquid-luster
- SainSmart TPU Luminous Glow In The Dark (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/luminous_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/tpu-luminous-glow-in-the-dark
- SainSmart TPU Mango Mojito (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sainsmart/materials/TPU/filaments/mango_mojito/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sainsmart/tpu-mango-mojito
- Sakata 3D ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/abs
- Sakata 3D ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/asa
- Sakata 3D Go&Print PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/goprint_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/go-print-pla
- Sakata 3D High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/high-speed-pla
- Sakata 3D HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/hips
- Sakata 3D HR-870 PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/hr_870_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/hr-870-pla
- Sakata 3D Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/matte-pla
- Sakata 3D PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/petg
- Sakata 3D PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/petg-cf
- Sakata 3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/pla
- Sakata 3D PLA 700 (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/700/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/pla-700
- Sakata 3D PLA 850 (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/850/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/pla-850
- Sakata 3D PLA Silk 850 (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/silk_850/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/pla-silk-850
- Sakata 3D Sakata 3D FleX-920 (TPE) has a recommended nozzle temperature of 220–245 °C and a recommended bed temperature of at most 40 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/TPE/filaments/sakata_3d_flex_920_blanco/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/sakata-3d-flex-920
- Sakata 3D Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/silk-pla
- Sakata 3D Wood PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sakata_3d/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sakata-3d/wood-pla
- Siddament Siddament (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siddament/materials/PLA/filaments/siddament/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siddament/siddament
- Siraya Tech Fibreheart ABS HT HF (ABS) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/ABS/filaments/fibreheart_abs_ht_hf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-abs-ht-hf
- Siraya Tech Fibreheart ABS-CF Core (ABS) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/ABS/filaments/fibreheart_abs_cf_core/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-abs-cf-core
- Siraya Tech Fibreheart ABS-GF (ABS) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/ABS/filaments/fibreheart_abs_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-abs-gf
- Siraya Tech Fibreheart ASA-GF (ASA) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/ASA/filaments/fibreheart_asa_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-asa-gf
- Siraya Tech Fibreheart PET-CF (PET) has a recommended nozzle temperature of 280–320 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PET/filaments/fibreheart_pet_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-pet-cf
- Siraya Tech Fibreheart PET-GF (PET) has a recommended nozzle temperature of 300–320 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PET/filaments/fibreheart_pet_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-pet-gf
- Siraya Tech Fibreheart PETG-CF Pro (PETG) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PETG/filaments/fibreheart_petg_cf_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-petg-cf-pro
- Siraya Tech Fibreheart PPA (PPA) has a recommended nozzle temperature of 280–300 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PPA/filaments/fibreheart_ppa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-ppa
- Siraya Tech Fibreheart PPA-CF (PPA) has a recommended nozzle temperature of 280–320 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PPA/filaments/fibreheart_ppa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-ppa-cf
- Siraya Tech Fibreheart PPA-CF Core (PPA) has a recommended nozzle temperature of 280–320 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PPA/filaments/fibreheart_ppa_cf_core/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-ppa-cf-core
- Siraya Tech Fibreheart TPU-GF (TPU) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/TPU/filaments/fibreheart_tpu_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/fibreheart-tpu-gf
- Siraya Tech Flex TPU 64D (TPU) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/TPU/filaments/flex_tpu_64d/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/flex-tpu-64d
- Siraya Tech Flex TPU 85A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 20–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/TPU/filaments/flex_tpu_85a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/flex-tpu-85a
- Siraya Tech Flex TPU Air 85A (TPU) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/TPU/filaments/flex_tpu_air/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/flex-tpu-air-85a
- Siraya Tech Rebound PEBA 85A (PEBA) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PEBA/filaments/rebound_peba_85a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/rebound-peba-85a
- Siraya Tech Rebound PEBA 95A (PEBA) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 60–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PEBA/filaments/rebound_peba_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/rebound-peba-95a
- Siraya Tech Rebound PEBA Air 95A (PEBA) has a recommended nozzle temperature of 230–270 °C and a recommended bed temperature of 60–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/PEBA/filaments/rebound_peba_air_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/rebound-peba-air-95a
- Siraya Tech Roamr TPU Air HR 80A (TPU) has a recommended nozzle temperature of 235–270 °C and a recommended bed temperature of 35–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/TPU/filaments/roamr_tpu_air_hr_80a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/roamr-tpu-air-hr-80a
- Siraya Tech Roamr TPU Air HR 85A (TPU) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 35–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/siraya_tech/materials/TPU/filaments/roamr_tpu_air_hr_85a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/siraya-tech/roamr-tpu-air-hr-85a
- Slic3D PETG Basic (PETG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 65–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PETG/filaments/petg_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/slic3d/petg-basic
- Slic3D PLA Basic (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/slic3d/materials/PLA/filaments/pla_basic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/slic3d/pla-basic
- SMART MATERIALS 3D ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/abs
- SMART MATERIALS 3D ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/asa
- SMART MATERIALS 3D ASA GF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/ASA/filaments/gf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/asa-gf
- SMART MATERIALS 3D Crystal PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/crystal_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/crystal-pla
- SMART MATERIALS 3D Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/glow-pla
- SMART MATERIALS 3D Glow TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/TPU/filaments/glow_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/glow-tpu
- SMART MATERIALS 3D HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/hips
- SMART MATERIALS 3D Matte PP CF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PP/filaments/matte_cf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/matte-pp-cf
- SMART MATERIALS 3D Neon PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/neon_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/neon-pla
- SMART MATERIALS 3D PA6 (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PA6/filaments/pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pa6
- SMART MATERIALS 3D Pastel PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/pastel_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pastel-pla
- SMART MATERIALS 3D PEEK (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PEEK/filaments/peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/peek
- SMART MATERIALS 3D PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PEI/filaments/pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pei
- SMART MATERIALS 3D PET (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PET/filaments/pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pet
- SMART MATERIALS 3D PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/petg
- SMART MATERIALS 3D PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/petg-cf
- SMART MATERIALS 3D PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pla
- SMART MATERIALS 3D PLA 3D850 (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/3d850/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pla-3d850
- SMART MATERIALS 3D PLA 3D870 (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/3d870/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pla-3d870
- SMART MATERIALS 3D PLA EP Easy Print (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/ep_easy_print/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pla-ep-easy-print
- SMART MATERIALS 3D PLA Iris (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/iris/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pla-iris
- SMART MATERIALS 3D PP (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pp
- SMART MATERIALS 3D PP GF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PP/filaments/gf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pp-gf
- SMART MATERIALS 3D PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pva
- SMART MATERIALS 3D PVB (PVB) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PVB/filaments/pvb/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pvb
- SMART MATERIALS 3D PVDF (PVDF) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PVDF/filaments/pvdf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/pvdf
- SMART MATERIALS 3D Recycled PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/recycled_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/recycled-pla
- SMART MATERIALS 3D Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/silk-pla
- SMART MATERIALS 3D TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/tpu
- SMART MATERIALS 3D TPU CF (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/TPU/filaments/cf_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/tpu-cf
- SMART MATERIALS 3D Wood PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smart_materials_3d/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smart-materials-3d/wood-pla
- SmartPrint ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/abs
- SmartPrint ASA (ASA) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/asa
- SmartPrint HS-PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/hs_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/hs-pla
- SmartPrint PA12-CF15 (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PA12/filaments/pa12_cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pa12-cf15
- SmartPrint PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/petg
- SmartPrint PETG Transparent (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PETG/filaments/petg_transparent/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/petg-transparent
- SmartPrint PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla
- SmartPrint PLA Galaxy (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-galaxy
- SmartPrint PLA Glow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-glow
- SmartPrint PLA Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-marble
- SmartPrint PLA Matte (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-matte
- SmartPrint PLA Meta (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_meta/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-meta
- SmartPrint PLA Silk (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-silk
- SmartPrint PLA Silk Dual (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_silk_dual/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-silk-dual
- SmartPrint PLA Silk Tri (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_silk_tri/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-silk-tri
- SmartPrint PLA Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-wood
- SmartPrint PLA-CF (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-cf
- SmartPrint PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/pla-plus
- SmartPrint TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/smartprint/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/smartprint/tpu
- Snapmaker ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/abs
- Snapmaker Basic PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/basic_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/basic-pla
- Snapmaker Breakaway Support for PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/breakaway_support/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/breakaway-support-for-pla
- Snapmaker Glow-in-the-dark PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/glow-in-the-dark-pla
- Snapmaker High Flow TPU95 (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/TPU/filaments/high_flow_tpu95/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/high-flow-tpu95
- Snapmaker Matte PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/matte-pla
- Snapmaker Nylon (PA6) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PA6/filaments/nylon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/nylon
- Snapmaker PETG (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/petg
- Snapmaker PETG HF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PETG/filaments/petg_hf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/petg-hf
- Snapmaker PLA Full Spectrum (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 25–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/pla_full_spectrum/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/pla-full-spectrum
- Snapmaker PLA-CF (PLA) has a recommended nozzle temperature of 200–250 °C and a recommended bed temperature of 35–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/pla-cf
- Snapmaker PVA (PVA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/pva
- Snapmaker Silk Dual-Color PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/silk_dual_color_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/silk-dual-color-pla
- Snapmaker Silk PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/silk-pla
- Snapmaker SnapSpeed PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/snapspeed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/snapspeed-pla
- Snapmaker TPU (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/tpu
- Snapmaker TPU 90A (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/TPU/filaments/tpu_90a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/tpu-90a
- Snapmaker TPU 95A HF (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/TPU/filaments/tpu_95a_hf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/tpu-95a-hf
- Snapmaker Wood PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/snapmaker/materials/PLA/filaments/wood_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/snapmaker/wood-pla
- SOVB 3D Fil ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sovb_3d/materials/ABS/filaments/fil_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sovb-3d/fil-abs
- SOVB 3D Fil PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sovb_3d/materials/PLA/filaments/fil_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sovb-3d/fil-pla
- SOVB 3D Glow ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sovb_3d/materials/ABS/filaments/glow_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sovb-3d/glow-abs
- Spectrum ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/abs
- Spectrum ABS FR V0 (ABS) has a recommended nozzle temperature of 240–265 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ABS/filaments/abs_fr_v0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/abs-fr-v0
- Spectrum ABS GP450 (ABS) has a recommended nozzle temperature of 235–255 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ABS/filaments/abs_gp450/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/abs-gp450
- Spectrum ABS Kevlar (ABS) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ABS/filaments/abs_kevlar/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/abs-kevlar
- Spectrum ABS Medical (ABS) has a recommended nozzle temperature of 235–255 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ABS/filaments/abs_medical/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/abs-medical
- Spectrum ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/asa
- Spectrum ASA 275 (ASA) has a recommended nozzle temperature of 200–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ASA/filaments/asa_275/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/asa-275
- Spectrum ASA CF (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ASA/filaments/cf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/asa-cf
- Spectrum ASA Kevlar (ASA) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ASA/filaments/asa_kevlar/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/asa-kevlar
- Spectrum ASA-X CF10 (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ASA/filaments/asa_x_cf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/asa-x-cf10
- Spectrum ASA-X GF10 (ASA) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ASA/filaments/asa_x_gf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/asa-x-gf10
- Spectrum Crystal Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/crystal_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/crystal-silk-pla
- Spectrum FlameGuard PLA (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/flameguard_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/flameguard-pla
- Spectrum FlameGuard Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/flameguard_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/flameguard-silk-pla
- Spectrum Fr V0 PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PC/filaments/fr_v0_pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/fr-v0-pc
- Spectrum Glitter Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/glitter_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/glitter-silk-pla
- Spectrum Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/glow-petg
- Spectrum Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/glow-pla
- Spectrum High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 0–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/high-speed-pla
- Spectrum HIPS (HIPS) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/HIPS/filaments/hips/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/hips
- Spectrum HIPS-X (HIPS) has a recommended nozzle temperature of 230–245 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/HIPS/filaments/hips_x/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/hips-x
- Spectrum Huracan PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/huracan_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/huracan-pla
- Spectrum Huracan Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/huracan_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/huracan-silk-pla
- Spectrum LW-PLA UltraFoam (PLA) has a recommended nozzle temperature of 190–250 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/lw_pla_ultrafoam/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/lw-pla-ultrafoam
- Spectrum Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/matte-pla
- Spectrum Metal Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/metal_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/metal-silk-pla
- Spectrum PA12 CF15 (PA/CF) has a recommended nozzle temperature of 255–290 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA12/filaments/pa12_cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa12-cf15
- Spectrum PA6 CF15 (PA/CF) has a recommended nozzle temperature of 260–290 °C and a recommended bed temperature of 80–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-cf15
- Spectrum PA6 CS20 FR V0 (PA6) has a recommended nozzle temperature of 265–290 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_cs20_fr_v0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-cs20-fr-v0
- Spectrum PA6 GK10 (PA6) has a recommended nozzle temperature of 260–290 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_gk10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-gk10
- Spectrum PA6 Low Warp (PA6) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_low_warp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-low-warp
- Spectrum PA6 Low Warp CF15S (PA/CF) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_low_warp_cf15s/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-low-warp-cf15s
- Spectrum PA6 Low Warp GF30 (PA6) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_low_warp_gf30/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-low-warp-gf30
- Spectrum PA6 Neat BK (PA6) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_neat_bk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-neat-bk
- Spectrum Pa6 Neat Nt (PA6) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/pa6_neat_nt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pa6-neat-nt
- Spectrum Pastello PLA (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pastello_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pastello-pla
- Spectrum PC 275 (PC) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 90–130 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PC/filaments/pc_275/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pc-275
- Spectrum PCTG CF (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PCTG/filaments/cf_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pctg-cf
- Spectrum PCTG CF10 (PCTG) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PCTG/filaments/pctg_cf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pctg-cf10
- Spectrum PCTG GF (PCTG) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PCTG/filaments/gf_pctg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pctg-gf
- Spectrum PCTG GF10 (PCTG) has a recommended nozzle temperature of 250–270 °C and a recommended bed temperature of 50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PCTG/filaments/pctg_gf10/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pctg-gf10
- Spectrum PCTG Premium (PCTG) has a recommended nozzle temperature of 230–270 °C and a recommended bed temperature of 60–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PCTG/filaments/pctg_premium/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pctg-premium
- Spectrum PET CF15 (PET) has a recommended nozzle temperature of 245–270 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PET/filaments/pet_cf15/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pet-cf15
- Spectrum PET G Matt Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/pet_g_matt_matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pet-g-matt-matte-petg
- Spectrum PET-G FR V0 PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/pet_g_fr_v0_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pet-g-fr-v0-petg
- Spectrum PET-G Glitter PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/pet_g_glitter_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pet-g-glitter-petg
- Spectrum PET-G Premium PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/pet_g_premium_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pet-g-premium-petg
- Spectrum PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg
- Spectrum PETG Carbon (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_carbon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-carbon
- Spectrum PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-cf
- Spectrum PETG FR V0 (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_fr_v0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-fr-v0
- Spectrum PETG FX120 (PETG) has a recommended nozzle temperature of 240–260 °C and a recommended bed temperature of 80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_fx120/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-fx120
- Spectrum PETG Glitter (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_glitter/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-glitter
- Spectrum PETG Glow in the Dark (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-glow-in-the-dark
- Spectrum PETG HT100 (PETG) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 100–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_ht100/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-ht100
- Spectrum PETG MATT (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_matt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-matt
- Spectrum PETG Premium (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_premium/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-premium
- Spectrum PETG Premium High Speed (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/petg_premium_high_speed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/petg-premium-high-speed
- Spectrum PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla
- Spectrum PLA AquaPrint (PLA) has a recommended nozzle temperature of 190–215 °C and a recommended bed temperature of 25–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/aquaprint/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-aquaprint
- Spectrum PLA Carbon (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_carbon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-carbon
- Spectrum PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-cf
- Spectrum PLA Crystal (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_crystal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-crystal
- Spectrum PLA Electrically Conductive (PLA) has a recommended nozzle temperature of 210–230 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_electrically_conductive/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-electrically-conductive
- Spectrum PLA Glitter (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_glitter/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-glitter
- Spectrum PLA Glow in the Dark (PLA) has a recommended nozzle temperature of 185–225 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-glow-in-the-dark
- Spectrum PLA GreenyHT (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/greenyht/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-greenyht
- Spectrum PLA GreenyPro (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/greenypro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-greenypro
- Spectrum PLA Magic SILK (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_magic_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-magic-silk
- Spectrum PLA MATT (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_matt/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-matt
- Spectrum PLA Metal (PLA) has a recommended nozzle temperature of 195–230 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_metal/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-metal
- Spectrum PLA Nature (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_nature/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-nature
- Spectrum PLA Premium (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_premium/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-premium
- Spectrum PLA Premium HighSpeed (PLA) has a recommended nozzle temperature of 190–250 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_premium_highspeed/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-premium-highspeed
- Spectrum PLA SILK (PLA) has a recommended nozzle temperature of 190–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-silk
- Spectrum PLA SILK Rainbow (PLA) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_silk_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-silk-rainbow
- Spectrum PLA Thermoactive (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_thermoactive/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-thermoactive
- Spectrum PLA Tough (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/pla_tough/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-tough
- Spectrum PLA WOOD (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pla-wood
- Spectrum PP (PP) has a recommended nozzle temperature of 265–295 °C and a recommended bed temperature of 95–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pp
- Spectrum PPS AM230 (PPS) has a recommended nozzle temperature of 300–330 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PPS/filaments/pps_am230/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/pps-am230
- Spectrum PTFE (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/ptfe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/ptfe
- Spectrum R PETG (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PETG/filaments/r_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/r-petg
- Spectrum R PLA (PLA) has a recommended nozzle temperature of 190–215 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/r_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/r-pla
- Spectrum SafeGuard PLA (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 0–45 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/safeguard_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/safeguard-pla
- Spectrum smart ABS (ABS) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ABS/filaments/smart_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/smart-abs
- Spectrum Stone Age PLA (PLA) has a recommended nozzle temperature of 185–230 °C and a recommended bed temperature of 0–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PLA/filaments/stone_age_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/stone-age-pla
- Spectrum ThermaTech PA (PA6) has a recommended nozzle temperature of 250–280 °C and a recommended bed temperature of 60–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/PA6/filaments/thermatech_pa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/thermatech-pa
- Spectrum TPU S-Flex 85A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/TPU/filaments/s_flex_85a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/tpu-s-flex-85a
- Spectrum TPU S-Flex 90A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/TPU/filaments/s_flex_90a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/tpu-s-flex-90a
- Spectrum TPU S-Flex 98A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/TPU/filaments/s_flex_98a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/tpu-s-flex-98a
- Spectrum TPU S-Flex Carbon (TPU) has a recommended nozzle temperature of 210–245 °C and a recommended bed temperature of 45–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/TPU/filaments/s_flex_carbon/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/tpu-s-flex-carbon
- Spectrum X Gf10 GF ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/spectrum/materials/ASA/filaments/x_gf10_gf_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/spectrum/x-gf10-gf-asa
- StrongHero3D N2 N3 Multi Color (PLA) has a recommended nozzle temperature of 200–245 °C and a recommended bed temperature of 55–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/stronghero3d/materials/PLA/filaments/n2_silver_forge_black/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/stronghero3d/n2-n3-multi-color
- SUNLU 95A High Speed TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/TPU/filaments/95a_high_speed_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/95a-high-speed-tpu
- SUNLU ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/abs
- SUNLU ABS-FR (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/ABS/filaments/abs_fr/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/abs-fr
- SUNLU APLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/apla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/apla
- SUNLU ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/asa
- SUNLU Fluorescent PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/fluorescent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/fluorescent-pla
- SUNLU Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/glow-petg
- SUNLU Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/glow-pla
- SUNLU High Speed ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/ABS/filaments/high_speed_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/high-speed-abs
- SUNLU High Speed Matte PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/high_speed_matte_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/high-speed-matte-petg
- SUNLU High Speed Matte PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/high_speed_matte_pla/index.json; dataset verified date 2026-10-13). The source record links a manufacturer data sheet at https://cdn.shopify.com/s/files/1/0909/3450/9859/files/PLA_TDS.pdf?v=1758968249. https://filamentfacts.com/brand/sunlu/high-speed-matte-pla
- SUNLU High Speed PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/high-speed-petg
- SUNLU High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/high-speed-pla
- SUNLU High Speed PLA Marble (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/high_speed_pla_marble/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/high-speed-pla-marble
- SUNLU High Speed PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/high_speed_pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/high-speed-pla-plus
- SUNLU Luminous Glow In The Dark PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/luminous_glow_in_the_dark_glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/luminous-glow-in-the-dark-petg
- SUNLU Matte PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/petg_matte_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/matte-petg-cf
- SUNLU PA12-CF (PA/CF) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PA12/filaments/pa12_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pa12-cf
- SUNLU PA6 Easy PA (PA6) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PA6/filaments/easy_pa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pa6-easy-pa
- SUNLU PA6-CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PA6/filaments/pa6_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pa6-cf
- SUNLU PA6-GF (PA6) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PA6/filaments/pa6_gf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pa6-gf
- SUNLU PC (PC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pc
- SUNLU PC-ABS (ABS) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/ABS/filaments/pc_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pc-abs
- SUNLU PCL (PCL) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PCL/filaments/pcl/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pcl
- SUNLU PEEK (PEEK) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PEEK/filaments/peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/peek
- SUNLU PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/petg
- SUNLU PETG 2.0 (PETG) has a recommended nozzle temperature of 230–270 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/petg_2_0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/petg-2-0
- SUNLU PETG Carbon Fiber (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/petg_carbon_fiber/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/petg-carbon-fiber
- SUNLU PETG Glow In The Dark Filament (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PETG/filaments/petg_glow_in_the_dark_filament/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/petg-glow-in-the-dark-filament
- SUNLU PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla
- SUNLU PLA Carbon Fiber (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_carbon_fiber/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-carbon-fiber
- SUNLU PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-cf
- SUNLU PLA Classic (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_classic/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-classic
- SUNLU PLA Galaxy (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_galaxy/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-galaxy
- SUNLU PLA Glow In The Dark (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_glow_in_the_dark/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-glow-in-the-dark
- SUNLU PLA Matte (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-matte
- SUNLU PLA Matte Dual-Color (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_matte_dual_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-matte-dual-color
- SUNLU PLA Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-rainbow
- SUNLU PLA Silk (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-silk
- SUNLU PLA Transparent Rainbow (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_transparent_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-transparent-rainbow
- SUNLU PLA Twinkling (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_twinkling/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-twinkling
- SUNLU PLA Wood (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/wood/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-wood
- SUNLU PLA-Meta (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla_meta/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-meta
- SUNLU PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-plus
- SUNLU PLA+ 2.0 (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/pla+_20/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pla-plus-2-0
- SUNLU PP (PP) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pp
- SUNLU PVA (PVA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pva
- SUNLU PVB (PVB) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PVB/filaments/pvb/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/pvb
- SUNLU Real Wood Fiber PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/real_wood_fiber_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/real-wood-fiber-pla
- SUNLU Silk 2.0 (PLA) has a recommended nozzle temperature of 205–235 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/silk_2_0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/silk-2-0
- SUNLU Silk PLA+ (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/silk_pla+/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/silk-pla-plus
- SUNLU Silk PLA+ Dual-Color (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/silk_pla+_dual_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/silk-pla-plus-dual-color
- SUNLU Silk PLA+ Four-Color (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/silk_pla+_four_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/silk-pla-plus-four-color
- SUNLU Silk PLA+ Rainbow (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/silk_pla+_rainbow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/silk-pla-plus-rainbow
- SUNLU Silk PLA+ Tri-Color (PLA+) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/silk_pla+_tri_color/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/silk-pla-plus-tri-color
- SUNLU Temperature Color Change PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/temperature_color_change_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/temperature-color-change-pla
- SUNLU TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/tpu
- SUNLU TPU Silk (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/TPU/filaments/tpu_silk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/tpu-silk
- SUNLU TPU90A (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/TPU/filaments/tpu90a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/tpu90a
- SUNLU TPU95A (TPU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/TPU/filaments/tpu95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/tpu95a
- SUNLU Transparent Clear PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/transparent_clear_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/transparent-clear-pla
- SUNLU Upgrade PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/sunlu/materials/PLA/filaments/upgrade_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/sunlu/upgrade-pla
- TECBEARS 95A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tecbears/materials/TPU/filaments/95a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tecbears/95a-tpu
- TECBEARS Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tecbears/materials/PETG/filaments/glow_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tecbears/glow-petg
- TECBEARS Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tecbears/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tecbears/glow-pla
- TECBEARS PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tecbears/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tecbears/petg
- TECBEARS PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tecbears/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tecbears/pla
- TECBEARS Plus High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tecbears/materials/PLA/filaments/plus_high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tecbears/plus-high-speed-pla
- TECBEARS Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tecbears/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tecbears/silk-pla
- Tectonic 3D Anasa Tpc (TPC) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/TPC/filaments/anasa_tpc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/anasa-tpc
- Tectonic 3D Atar FST1 PPE (PPE) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PPE/filaments/atar_fst1_ppe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/atar-fst1-ppe
- Tectonic 3D Aura ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/ABS/filaments/aura_abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/aura-abs
- Tectonic 3D Aura ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/ASA/filaments/aura_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/aura-asa
- Tectonic 3D Aura Co Polyester Cpe (CPE) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/CPE/filaments/aura_co_polyester_cpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/aura-co-polyester-cpe
- Tectonic 3D Aura PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PETG/filaments/aura_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/aura-petg
- Tectonic 3D Aura PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PLA/filaments/aura_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/aura-pla
- Tectonic 3D PA11 CF (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PA11/filaments/cf_pa11/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pa11-cf
- Tectonic 3D PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pa6-cf
- Tectonic 3D PC (PC) has a recommended nozzle temperature of 260–300 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PC/filaments/pc/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pc
- Tectonic 3D PEEK CF (PEEK) has a recommended nozzle temperature of 360–420 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PEEK/filaments/cf_peek/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/peek-cf
- Tectonic 3D PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PEI/filaments/pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pei
- Tectonic 3D PEKK (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PEKK/filaments/pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pekk
- Tectonic 3D PET CF (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PET/filaments/cf_pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pet-cf
- Tectonic 3D PP CF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PP/filaments/cf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pp-cf
- Tectonic 3D PPE (PPE) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PPE/filaments/ppe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/ppe
- Tectonic 3D PPSU (PPSU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PPSU/filaments/ppsu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/ppsu
- Tectonic 3D PVA (PVA) has a recommended nozzle temperature of 180–210 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PVA/filaments/pva/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/pva
- Tectonic 3D TPI (TPI) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/TPI/filaments/tpi/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/tpi
- Tectonic 3D Vulcan 1010 PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PEI/filaments/vulcan_1010_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/vulcan-1010-pei
- Tectonic 3D Vulcan 9085 PEI (PEI) has a recommended nozzle temperature of 340–380 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PEI/filaments/vulcan_9085_pei/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/vulcan-9085-pei
- Tectonic 3D Vulcan A PEKK (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PEKK/filaments/vulcan_a_pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/vulcan-a-pekk
- Tectonic 3D Vulcan Pi TPI (TPI) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/TPI/filaments/vulcan_pi_tpi/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/vulcan-pi-tpi
- Tectonic 3D Vulcan PPSU (PPSU) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PPSU/filaments/vulcan_ppsu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/vulcan-ppsu
- Tectonic 3D Vulcan SC PEKK (PEKK) has a recommended nozzle temperature of 350–400 °C and a recommended bed temperature of 120–160 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PEKK/filaments/vulcan_sc_pekk/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/vulcan-sc-pekk
- Tectonic 3D Zephyr CF MC CF PA11 (PA/CF) has a recommended nozzle temperature of 240–270 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tectonic_3d/materials/PA11/filaments/zephyr_cf_mc_cf_pa11/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tectonic-3d/zephyr-cf-mc-cf-pa11
- TEQStone ABS (ABS) has a recommended nozzle temperature of 210–250 °C and a recommended bed temperature of 100–120 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/abs
- TEQStone ASA (ASA) has a recommended nozzle temperature of 260–280 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/asa
- TEQStone Glow PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/glow-pla
- TEQStone Marble PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/marble-pla
- TEQStone PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 60–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/petg
- TEQStone PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/pla
- TEQStone PLA CF (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/pla-cf
- TEQStone Silk PLA (PLA) has a recommended nozzle temperature of 190–225 °C and a recommended bed temperature of 0–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/silk-pla
- TEQStone TPU 95A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 40–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/teqstone/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/teqstone/tpu-95a
- The Filament ASA (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/asa
- The Filament ASA CF (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/ASA/filaments/asa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/asa-cf
- The Filament HT-PLA (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PLA/filaments/ht_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/ht-pla
- The Filament PETG (PETG) has a recommended nozzle temperature of 230–255 °C and a recommended bed temperature of 60–75 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/petg
- The Filament PETG CF (PETG) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PETG/filaments/petg_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/petg-cf
- The Filament PETG Lite (PETG) has a recommended nozzle temperature of 235–255 °C and a recommended bed temperature of 60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PETG/filaments/petg_lite/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/petg-lite
- The Filament PLA (PLA) has a recommended nozzle temperature of 185–215 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/pla
- The Filament PLA CF (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/pla-cf
- The Filament PLA HS (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PLA/filaments/pla_hs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/pla-hs
- The Filament PLA Lite (PLA) has a recommended nozzle temperature of 195–220 °C and a recommended bed temperature of 40–50 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PLA/filaments/pla_lite/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/pla-lite
- The Filament PLA Matte (PLA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/pla-matte
- The Filament TPU-82A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/TPU/filaments/tpu_82a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/tpu-82a
- The Filament TPU-87A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/TPU/filaments/tpu_87a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/tpu-87a
- The Filament TPU-95A (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 40–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/the_filament/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/the-filament/tpu-95a
- TINMORRY 95A TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/TPU/filaments/95a_tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/95a-tpu
- TINMORRY ABS Pro (ABS) has a recommended nozzle temperature of 220–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/ABS/filaments/abs_pro/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/abs-pro
- TINMORRY ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/asa
- TINMORRY Frosted GF PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/frosted_gf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/frosted-gf-petg
- TINMORRY Galaxy PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/galaxy_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/galaxy-petg
- TINMORRY Glow PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/petg_glow/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/glow-petg
- TINMORRY Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/glow-pla
- TINMORRY Marble PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/marble_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/marble-petg
- TINMORRY Matte PET CF (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PET/filaments/matte_cf_pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/matte-pet-cf
- TINMORRY Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/matte-pla
- TINMORRY Matte PP CF (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PP/filaments/matte_cf_pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/matte-pp-cf
- TINMORRY Metallic PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/metallic_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/metallic-petg
- TINMORRY PA6 CF (PA/CF) has a recommended nozzle temperature of 250–290 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PA6/filaments/cf_pa6/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/pa6-cf
- TINMORRY PET GF (PET) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PET/filaments/gf_pet/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/pet-gf
- TINMORRY PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/petg
- TINMORRY PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/petg-cf
- TINMORRY PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/pla
- TINMORRY PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/pla-cf
- TINMORRY Rapid-Eco PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PETG/filaments/rapid_eco_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/rapid-eco-petg
- TINMORRY Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/tinmorry/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/tinmorry/silk-pla
- UniTak3D PLA Matte (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–65 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/unitak3d/materials/PLA/filaments/pla_matte/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/unitak3d/pla-matte
- Verbatim ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/verbatim/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/verbatim/abs
- Verbatim BVOH (BVOH) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/verbatim/materials/BVOH/filaments/bvoh/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/verbatim/bvoh
- Verbatim PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/verbatim/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/verbatim/petg
- Verbatim PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/verbatim/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/verbatim/pla
- Verbatim PP (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/verbatim/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/verbatim/pp
- Verbatim Tefabloc TPE (TPE) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/verbatim/materials/TPE/filaments/tefabloc_tpe/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/verbatim/tefabloc-tpe
- Voxel PLA PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/voxel_pla/materials/PETG/filaments/high_speed_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/voxel-pla/petg
- Voxel PLA PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/voxel_pla/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/voxel-pla/pla
- Voxelab ASA-CF (ASA) has no listed nozzle or bed temperature in the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/voxelab/materials/ASA/filaments/asa_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/voxelab/asa-cf
- Winkle ABS (ABS) has a recommended nozzle temperature of 230–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/ABS/filaments/abs/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/abs
- Winkle ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/asa
- Winkle Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/glow-pla
- Winkle HD PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PLA/filaments/hd_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/hd-pla
- Winkle High Speed PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PLA/filaments/high_speed_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/high-speed-pla
- Winkle Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/matte-pla
- Winkle PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/petg
- Winkle PETG CF (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PETG/filaments/cf_petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/petg-cf
- Winkle PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/pla
- Winkle PLA UL94 V0 (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PLA/filaments/ul94_v0/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/pla-ul94-v0
- Winkle PP (PP) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 80–100 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PP/filaments/pp/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/pp
- Winkle Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/winkle/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/winkle/silk-pla
- XZN Glow PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/glow-pla
- XZN Gradient PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PLA/filaments/gradient_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/gradient-pla
- XZN Marble PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PLA/filaments/marble_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/marble-pla
- XZN PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–80 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/petg
- XZN PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/pla
- XZN PLA CF (PLA) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PLA/filaments/pla_cf/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/pla-cf
- XZN Silk PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/silk-pla
- XZN TPU 95A (TPU) has a recommended nozzle temperature of 200–230 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/TPU/filaments/tpu_95a/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/tpu-95a
- XZN Transparent PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 20–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/xzn/materials/PLA/filaments/transparent_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/xzn/transparent-pla
- YooPai Matte PLA+ (PLA+) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 35–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/yoopai/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/yoopai/matte-pla-plus
- ZIRO 3D Fluorescence PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ziro_3d/materials/PLA/filaments/fluorescence_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ziro-3d/fluorescence-pla
- ZIRO 3D Glitter Diamond PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 50–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ziro_3d/materials/PLA/filaments/diamond_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ziro-3d/glitter-diamond-pla
- ZIRO 3D Gradiant Matte PLA (PLA) has a recommended nozzle temperature of 190–220 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ziro_3d/materials/PLA/filaments/gradiant_matte_pla/index.json; dataset verified date 2026-10-13). It has no listed bed temperature in the imported sources. https://filamentfacts.com/brand/ziro-3d/gradiant-matte-pla
- ZIRO 3D Gradient Color PLA Silk (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ziro_3d/materials/PLA/filaments/gradient_color_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ziro-3d/gradient-color-pla-silk
- ZIRO 3D Gradient Twinkling PLA (PLA) has a recommended nozzle temperature of 190–220 °C and a recommended bed temperature of 45–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/ziro_3d/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/ziro-3d/gradient-twinkling-pla
- Zyltech ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/ASA/filaments/asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/asa
- Zyltech Glow PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/glow_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/glow-pla
- Zyltech Matte ASA (ASA) has a recommended nozzle temperature of 235–260 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/ASA/filaments/matte_asa/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/matte-asa
- Zyltech Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/matte-pla
- Zyltech PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PETG/filaments/petg/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/petg
- Zyltech PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/pla
- Zyltech PLA CF (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/cf_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/pla-cf
- Zyltech Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/silk-pla
- Zyltech Texas Twister Series Multi Color Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/texas_twister_series_multi_color_matte_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/texas-twister-series-multi-color-matte-pla
- Zyltech Texas Twister Series Multi Color PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/texas_twister_series_multi_color_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/texas-twister-series-multi-color-pla
- Zyltech Texas Twister Series Multi Color Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/PLA/filaments/texas_twister_series_multi_color_silk_pla/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/texas-twister-series-multi-color-silk-pla
- Zyltech TPU (TPU) has a recommended nozzle temperature of 210–240 °C and a recommended bed temperature of 30–60 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/zyltech/materials/TPU/filaments/tpu/index.json; dataset verified date 2026-10-13). https://filamentfacts.com/brand/zyltech/tpu

## Printer and filament

- Bambu Lab A1 with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/90a-flexible-peba
- Bambu Lab A1 with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/basic-matte-pla
- Bambu Lab A1 with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/basic-silk-pla
- Bambu Lab A1 with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/conductive-pla
- Bambu Lab A1 with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/crystal-transparent-pla
- Bambu Lab A1 with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/dual-color-matte-pla
- Bambu Lab A1 with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/dual-color-silk-pla
- Bambu Lab A1 with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Bambu Lab A1 with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/glow-pla
- Bambu Lab A1 with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/glow-tpu
- Bambu Lab A1 with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/high-speed-pla
- Bambu Lab A1 with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/marble-pla
- Bambu Lab A1 with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/matte-pla
- Bambu Lab A1 with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/peba
- Bambu Lab A1 with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/petg
- Bambu Lab A1 with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/pla
- Bambu Lab A1 with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/amolen/pla-cf
- Bambu Lab A1 with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/pla-metal
- Bambu Lab A1 with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/quad-color-silk-pla
- Bambu Lab A1 with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/rainbow-silk-pla
- Bambu Lab A1 with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/s-series-silk-pla
- Bambu Lab A1 with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/shiny-glitter-silk-pla
- Bambu Lab A1 with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/shiny-gradient-silk-pla
- Bambu Lab A1 with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/amolen/silk-gf-pla
- Bambu Lab A1 with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/silk-pla
- Bambu Lab A1 with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/temperature-color-change-pla
- Bambu Lab A1 with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/tpu
- Bambu Lab A1 with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/transparent-pla
- Bambu Lab A1 with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/triple-color-matte-pla
- Bambu Lab A1 with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/triple-color-silk-pla
- Bambu Lab A1 with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/uv-color-change-pla
- Bambu Lab A1 with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/amolen/wood-pla
- Bambu Lab A1 with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/abs
- Bambu Lab A1 with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/asa
- Bambu Lab A1 with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/high-speed-pla
- Bambu Lab A1 with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/petg
- Bambu Lab A1 with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-basic
- Bambu Lab A1 with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-galaxy
- Bambu Lab A1 with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-marble
- Bambu Lab A1 with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-matte
- Bambu Lab A1 with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-metal
- Bambu Lab A1 with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-plus
- Bambu Lab A1 with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-silk
- Bambu Lab A1 with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-silk-dual-tricolor
- Bambu Lab A1 with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/pla-special
- Bambu Lab A1 with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/tpu
- Bambu Lab A1 with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/anycubic/translucent-petg
- Bambu Lab A1 with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/abs
- Bambu Lab A1 with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/abs-gf
- Bambu Lab A1 with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/asa
- Bambu Lab A1 with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/asa-aero
- Bambu Lab A1 with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/asa-cf
- Bambu Lab A1 with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/matte-asa-cf
- Bambu Lab A1 with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pa12-cf
- Bambu Lab A1 with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pa6-cf
- Bambu Lab A1 with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pa6-gf
- Bambu Lab A1 with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/paht-cf
- Bambu Lab A1 with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pc
- Bambu Lab A1 with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pc-fr
- Bambu Lab A1 with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pet-cf
- Bambu Lab A1 with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/petg-basic
- Bambu Lab A1 with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/petg-hf
- Bambu Lab A1 with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/petg-matte
- Bambu Lab A1 with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/petg-translucent
- Bambu Lab A1 with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/petg-cf
- Bambu Lab A1 with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla
- Bambu Lab A1 with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-aero
- Bambu Lab A1 with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-basic
- Bambu Lab A1 with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-basic-gradient
- Bambu Lab A1 with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-galaxy
- Bambu Lab A1 with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-glow
- Bambu Lab A1 with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-lite
- Bambu Lab A1 with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-marble
- Bambu Lab A1 with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-matte
- Bambu Lab A1 with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-metal
- Bambu Lab A1 with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-pure
- Bambu Lab A1 with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-silk-dual-color
- Bambu Lab A1 with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-silk-multi-color
- Bambu Lab A1 with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-silk-plus
- Bambu Lab A1 with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-sparkle
- Bambu Lab A1 with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-tough-plus
- Bambu Lab A1 with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-translucent
- Bambu Lab A1 with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-wood
- Bambu Lab A1 with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pla-cf
- Bambu Lab A1 with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/ppa-cf
- Bambu Lab A1 with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pps-cf
- Bambu Lab A1 with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/pva
- Bambu Lab A1 with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/silk-pla
- Bambu Lab A1 with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/support-for-abs
- Bambu Lab A1 with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/support-for-pa-pet
- Bambu Lab A1 with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/support-for-pla
- Bambu Lab A1 with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/support-for-pla-petg
- Bambu Lab A1 with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/tpu
- Bambu Lab A1 with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/tpu-85a
- Bambu Lab A1 with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/tpu-90a
- Bambu Lab A1 with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/tpu-95a-hf
- Bambu Lab A1 with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/bambu-lab/tpu-for-ams
- Bambu Lab A1 with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/asa
- Bambu Lab A1 with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/cpe
- Bambu Lab A1 with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/economy-pla
- Bambu Lab A1 with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/glow-pha
- Bambu Lab A1 with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/high-speed-pla
- Bambu Lab A1 with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/lw-ht-pla
- Bambu Lab A1 with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/matte-pla
- Bambu Lab A1 with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/petg
- Bambu Lab A1 with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/pha
- Bambu Lab A1 with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/pha-pla
- Bambu Lab A1 with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/pla
- Bambu Lab A1 with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/r-semi-pla
- Bambu Lab A1 with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/semi-pla
- Bambu Lab A1 with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/silk-pla
- Bambu Lab A1 with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/stonefill-pla
- Bambu Lab A1 with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/colorfabb/tpu
- Bambu Lab A1 with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/95a-tpu
- Bambu Lab A1 with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/abs
- Bambu Lab A1 with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/cr-petg
- Bambu Lab A1 with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/cr-pla-carbon
- Bambu Lab A1 with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/ender-fast-pla
- Bambu Lab A1 with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/ender-pla-plus
- Bambu Lab A1 with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hp-asa
- Bambu Lab A1 with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hp-tpu
- Bambu Lab A1 with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-abs
- Bambu Lab A1 with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-luminous-pla
- Bambu Lab A1 with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-pa6-cf
- Bambu Lab A1 with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-pc
- Bambu Lab A1 with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-petg
- Bambu Lab A1 with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-pla
- Bambu Lab A1 with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-pla-cf
- Bambu Lab A1 with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/hyper-rainbow-pla
- Bambu Lab A1 with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/petg
- Bambu Lab A1 with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/pla
- Bambu Lab A1 with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/creality/pla-cf
- Bambu Lab A1 with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/pla-cr-wood
- Bambu Lab A1 with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/creality/ppa-cf
- Bambu Lab A1 with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/silk-pla
- Bambu Lab A1 with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/soleyin-basic-petg
- Bambu Lab A1 with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/creality/soleyin-ultra-pla
- Bambu Lab A1 with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/abs
- Bambu Lab A1 with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/asa
- Bambu Lab A1 with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/galaxy-pla
- Bambu Lab A1 with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/paht-cf
- Bambu Lab A1 with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pc
- Bambu Lab A1 with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pc-fr
- Bambu Lab A1 with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pet-cf
- Bambu Lab A1 with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/petg
- Bambu Lab A1 with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/petg-pro
- Bambu Lab A1 with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/petg-translucent
- Bambu Lab A1 with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/petg-cf
- Bambu Lab A1 with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/petg-gf
- Bambu Lab A1 with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla
- Bambu Lab A1 with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-basic
- Bambu Lab A1 with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-glow
- Bambu Lab A1 with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-marble
- Bambu Lab A1 with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-matte
- Bambu Lab A1 with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-metallic
- Bambu Lab A1 with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-plus
- Bambu Lab A1 with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-pro
- Bambu Lab A1 with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-sparkle
- Bambu Lab A1 with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-wood
- Bambu Lab A1 with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/pla-cf
- Bambu Lab A1 with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/rapid-petg
- Bambu Lab A1 with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/rapid-pla-plus
- Bambu Lab A1 with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/rapid-tpu-95a
- Bambu Lab A1 with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/silk-pla
- Bambu Lab A1 with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/elegoo/tpu-95a
- Bambu Lab A1 with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/abs
- Bambu Lab A1 with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/abs-high-speed
- Bambu Lab A1 with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/abs-cf
- Bambu Lab A1 with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/abs-gf
- Bambu Lab A1 with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/abs-pc
- Bambu Lab A1 with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/abs-plus
- Bambu Lab A1 with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/asa
- Bambu Lab A1 with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/asa-high-speed
- Bambu Lab A1 with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/asa-light-weight
- Bambu Lab A1 with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/asa-cf
- Bambu Lab A1 with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/asa-gf
- Bambu Lab A1 with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pa12-nylon
- Bambu Lab A1 with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pa12-cf
- Bambu Lab A1 with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pa12-gf
- Bambu Lab A1 with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pa6-cf
- Bambu Lab A1 with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pa6-gf
- Bambu Lab A1 with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/petg
- Bambu Lab A1 with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/petg-cf
- Bambu Lab A1 with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla
- Bambu Lab A1 with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-burnt-titanium
- Bambu Lab A1 with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-burnt-titanium-dual-color
- Bambu Lab A1 with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-burnt-titanium-rainbow
- Bambu Lab A1 with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-burnt-titanium-triple-color
- Bambu Lab A1 with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-galaxy
- Bambu Lab A1 with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-high-speed
- Bambu Lab A1 with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-light-weight
- Bambu Lab A1 with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-luminous
- Bambu Lab A1 with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-marble
- Bambu Lab A1 with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte
- Bambu Lab A1 with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte-dual-color
- Bambu Lab A1 with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte-gradient
- Bambu Lab A1 with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte-high-speed
- Bambu Lab A1 with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte-high-speed-gradient-multi-color
- Bambu Lab A1 with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte-high-speed-rock-rainbow
- Bambu Lab A1 with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte-high-speed-triple-color
- Bambu Lab A1 with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-matte-rainbow
- Bambu Lab A1 with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-metallic
- Bambu Lab A1 with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-rainbow
- Bambu Lab A1 with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-silk
- Bambu Lab A1 with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-silk-high-speed-dual-color
- Bambu Lab A1 with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-silk-high-speed-quadruple
- Bambu Lab A1 with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-silk-high-speed-triple-color
- Bambu Lab A1 with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-silk-rainbow
- Bambu Lab A1 with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-ultra-silk
- Bambu Lab A1 with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-wood
- Bambu Lab A1 with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-cf
- Bambu Lab A1 with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-plus
- Bambu Lab A1 with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pla-plus-high-speed
- Bambu Lab A1 with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pp
- Bambu Lab A1 with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/eryone/pp-cf
- Bambu Lab A1 with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/tpu
- Bambu Lab A1 with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/tpu-90a
- Bambu Lab A1 with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/tpu-high-speed
- Bambu Lab A1 with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/eryone/tpu-rainbow
- Bambu Lab A1 with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/abs-plus
- Bambu Lab A1 with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/abs-pluscf
- Bambu Lab A1 with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/abs-plushs
- Bambu Lab A1 with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/asa-plus
- Bambu Lab A1 with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/dark-twinkling-pla-magic
- Bambu Lab A1 with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/epaht-cf
- Bambu Lab A1 with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/epla-plushs
- Bambu Lab A1 with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/esun-petg-matte
- Bambu Lab A1 with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/mystic-silk-pla
- Bambu Lab A1 with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pa12-cf
- Bambu Lab A1 with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pa6-pa
- Bambu Lab A1 with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pa6-pa-cf
- Bambu Lab A1 with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/peak-pla
- Bambu Lab A1 with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pet
- Bambu Lab A1 with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/petg
- Bambu Lab A1 with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/petg-basic
- Bambu Lab A1 with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/petg-matte
- Bambu Lab A1 with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/petg-pluscf
- Bambu Lab A1 with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/petg-plushs
- Bambu Lab A1 with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-basic
- Bambu Lab A1 with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-cf
- Bambu Lab A1 with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-chameleon
- Bambu Lab A1 with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-hs
- Bambu Lab A1 with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-lite
- Bambu Lab A1 with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-luminous
- Bambu Lab A1 with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-luminous-rainbow
- Bambu Lab A1 with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-lw
- Bambu Lab A1 with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-marble
- Bambu Lab A1 with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-matte
- Bambu Lab A1 with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-metal
- Bambu Lab A1 with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-silk
- Bambu Lab A1 with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-silk-candy
- Bambu Lab A1 with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-silk-magic
- Bambu Lab A1 with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-silk-metal
- Bambu Lab A1 with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-silk-rainbow
- Bambu Lab A1 with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-st
- Bambu Lab A1 with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-stars
- Bambu Lab A1 with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-wood
- Bambu Lab A1 with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-plus
- Bambu Lab A1 with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pla-plus-cmyk
- Bambu Lab A1 with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/pva
- Bambu Lab A1 with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/silk-petg
- Bambu Lab A1 with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/tpe-83a
- Bambu Lab A1 with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/tpu-95a
- Bambu Lab A1 with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/tpu-lw
- Bambu Lab A1 with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/esun-3d/uv-change-pla-uv-color-change
- Bambu Lab A1 with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/basic-pla
- Bambu Lab A1 with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/biofusion-pla
- Bambu Lab A1 with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/biofusion-silk-pla
- Bambu Lab A1 with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/durapro-abs
- Bambu Lab A1 with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/durapro-asa
- Bambu Lab A1 with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/durapro-cf-pa12
- Bambu Lab A1 with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/durapro-matte-asa
- Bambu Lab A1 with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/durapro-pa12
- Bambu Lab A1 with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/durapro-pbt-pc
- Bambu Lab A1 with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/flax-pla
- Bambu Lab A1 with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/flex-hard-cf-tpu
- Bambu Lab A1 with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/flex-hard-tpu
- Bambu Lab A1 with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/flex-medium-tpu
- Bambu Lab A1 with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/flex-semisoft-tpu
- Bambu Lab A1 with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/glow-petg
- Bambu Lab A1 with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/greentec-matte-pla
- Bambu Lab A1 with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/greentec-pla
- Bambu Lab A1 with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/pctg
- Bambu Lab A1 with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/pearl-pla
- Bambu Lab A1 with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/petg
- Bambu Lab A1 with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/pla-nx2-matt
- Bambu Lab A1 with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/extrudr/wood-pla
- Bambu Lab A1 with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/fillamentum/asa-extrafill
- Bambu Lab A1 with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/fillamentum/cpe-hg100
- Bambu Lab A1 with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/fillamentum/pla-crystal-clear
- Bambu Lab A1 with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/fillamentum/pla-extrafill
- Bambu Lab A1 with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/abs
- Bambu Lab A1 with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/glow-abs
- Bambu Lab A1 with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/glow-pla
- Bambu Lab A1 with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/metallic-finish-pla
- Bambu Lab A1 with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/petg
- Bambu Lab A1 with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/pla
- Bambu Lab A1 with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/pla-basic
- Bambu Lab A1 with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/pla-cf
- Bambu Lab A1 with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/pla-matte
- Bambu Lab A1 with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/pla-max
- Bambu Lab A1 with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/pla-metal
- Bambu Lab A1 with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/pla-pro
- Bambu Lab A1 with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/silk-pla
- Bambu Lab A1 with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/tpu
- Bambu Lab A1 with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/transparent-pla
- Bambu Lab A1 with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/uv-color-changing-pla
- Bambu Lab A1 with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/hatchbox/wood-pla
- Bambu Lab A1 with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/abs
- Bambu Lab A1 with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/carbon-fiber-nylon
- Bambu Lab A1 with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/galaxy-pla
- Bambu Lab A1 with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/glow-abs
- Bambu Lab A1 with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/high-speed-pla-plus
- Bambu Lab A1 with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/petg-plus
- Bambu Lab A1 with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla
- Bambu Lab A1 with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla-basic
- Bambu Lab A1 with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla-chameleon
- Bambu Lab A1 with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla-glitter-rainbow
- Bambu Lab A1 with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla-matte
- Bambu Lab A1 with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla-mystic-silk
- Bambu Lab A1 with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla-silk-rainbow
- Bambu Lab A1 with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/pla-plus
- Bambu Lab A1 with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/silk-pla
- Bambu Lab A1 with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/inland/tpu
- Bambu Lab A1 with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/jayo/high-speed-matte-pla
- Bambu Lab A1 with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/jayo/matte-pla
- Bambu Lab A1 with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/jayo/petg
- Bambu Lab A1 with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/jayo/pla
- Bambu Lab A1 with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/jayo/pla-plus
- Bambu Lab A1 with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/jayo/silk-pla
- Bambu Lab A1 with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/jayo/tpu
- Bambu Lab A1 with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/abs
- Bambu Lab A1 with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/glow-pla
- Bambu Lab A1 with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/high-speed-petg
- Bambu Lab A1 with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/high-speed-pla
- Bambu Lab A1 with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/matte-pla
- Bambu Lab A1 with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/petg
- Bambu Lab A1 with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/petg-cf
- Bambu Lab A1 with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/pla
- Bambu Lab A1 with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/pla-basic
- Bambu Lab A1 with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/pla-cf
- Bambu Lab A1 with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/silk-pla
- Bambu Lab A1 with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/kingroon/tpu
- Bambu Lab A1 with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/abs
- Bambu Lab A1 with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/abs-basic
- Bambu Lab A1 with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/asa
- Bambu Lab A1 with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/asa-basic
- Bambu Lab A1 with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/easy-nylon
- Bambu Lab A1 with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/glow-abs
- Bambu Lab A1 with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/glow-pla
- Bambu Lab A1 with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/high-speed-petg
- Bambu Lab A1 with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/high-speed-pla
- Bambu Lab A1 with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/high-speed-tpu
- Bambu Lab A1 with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/luminous-high-speed-glow-tpu
- Bambu Lab A1 with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/matte-pla
- Bambu Lab A1 with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pc
- Bambu Lab A1 with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pc-professional
- Bambu Lab A1 with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/petg
- Bambu Lab A1 with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/petg-basic
- Bambu Lab A1 with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/petg-refill
- Bambu Lab A1 with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla
- Bambu Lab A1 with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-air
- Bambu Lab A1 with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-cf
- Bambu Lab A1 with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-cream
- Bambu Lab A1 with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-easy
- Bambu Lab A1 with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-easy-glow
- Bambu Lab A1 with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-plus
- Bambu Lab A1 with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-professional
- Bambu Lab A1 with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-refill
- Bambu Lab A1 with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-rock
- Bambu Lab A1 with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-super
- Bambu Lab A1 with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/pla-turbo-rapid
- Bambu Lab A1 with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/shimmer-pla
- Bambu Lab A1 with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/silk-pla
- Bambu Lab A1 with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/overture/tpu
- Bambu Lab A1 with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/abs
- Bambu Lab A1 with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/asa
- Bambu Lab A1 with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/cpe
- Bambu Lab A1 with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/creator-special-edition-pla
- Bambu Lab A1 with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/draft-pla
- Bambu Lab A1 with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/dual-panchroma-matte-pla
- Bambu Lab A1 with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/for-production-matte-pla
- Bambu Lab A1 with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/glow-pla
- Bambu Lab A1 with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/gradient-panchroma-pla
- Bambu Lab A1 with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/ht-pla-pro
- Bambu Lab A1 with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/ht-pla
- Bambu Lab A1 with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/ht-pla-gf
- Bambu Lab A1 with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/lw-polylite-pla
- Bambu Lab A1 with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/metallic-polylite-pla
- Bambu Lab A1 with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/metallic-polylite-silk-abs
- Bambu Lab A1 with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/metallic-polylite-silk-pla
- Bambu Lab A1 with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/muted-panchroma-matte-pla
- Bambu Lab A1 with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/neon-panchroma-pla
- Bambu Lab A1 with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pa12-cf
- Bambu Lab A1 with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pa6-cf
- Bambu Lab A1 with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pa6-gf
- Bambu Lab A1 with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/panchroma-cope
- Bambu Lab A1 with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/panchroma-glow-pla
- Bambu Lab A1 with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/panchroma-pla
- Bambu Lab A1 with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/panchroma-silk-pla
- Bambu Lab A1 with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pc
- Bambu Lab A1 with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pc-abs
- Bambu Lab A1 with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pc-pbt
- Bambu Lab A1 with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pet-cf
- Bambu Lab A1 with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/petg
- Bambu Lab A1 with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/petg-cf
- Bambu Lab A1 with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pla
- Bambu Lab A1 with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pla-cf
- Bambu Lab A1 with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pla-polycast
- Bambu Lab A1 with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polyflex-95-hf-high-speed-tpu
- Bambu Lab A1 with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polyflex-tpu
- Bambu Lab A1 with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polylite-abs
- Bambu Lab A1 with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polylite-asa
- Bambu Lab A1 with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polylite-pc
- Bambu Lab A1 with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polylite-petg
- Bambu Lab A1 with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polylite-pla
- Bambu Lab A1 with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polylite-pla-cf
- Bambu Lab A1 with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polymaker-pla-pro
- Bambu Lab A1 with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polymax-pc
- Bambu Lab A1 with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polymax-petg
- Bambu Lab A1 with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polymax-pla
- Bambu Lab A1 with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polymide-copa-pa6
- Bambu Lab A1 with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polysmooth
- Bambu Lab A1 with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polysonic-pla
- Bambu Lab A1 with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/polysupport-for-pla
- Bambu Lab A1 with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pps-cf
- Bambu Lab A1 with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pva
- Bambu Lab A1 with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pva-polydissolve-s1
- Bambu Lab A1 with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pva-polysupport-for-pa12
- Bambu Lab A1 with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/pvb
- Bambu Lab A1 with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/satin-panchroma-pla
- Bambu Lab A1 with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/silk-abs
- Bambu Lab A1 with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/silk-pla
- Bambu Lab A1 with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/polymaker/wood-pla
- Bambu Lab A1 with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/basic-pla
- Bambu Lab A1 with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/conductive-pla
- Bambu Lab A1 with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/fiber-ht-matte-pla
- Bambu Lab A1 with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/fluorescent-pla
- Bambu Lab A1 with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/glitter-petg
- Bambu Lab A1 with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/glitter-pla
- Bambu Lab A1 with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/glow-pla
- Bambu Lab A1 with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/high-speed-pla
- Bambu Lab A1 with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/iron-metal-composite-pla
- Bambu Lab A1 with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/marble-pla
- Bambu Lab A1 with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/matte-pla
- Bambu Lab A1 with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/metal-composite-pla
- Bambu Lab A1 with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/metallic-petg
- Bambu Lab A1 with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/metallic-pla
- Bambu Lab A1 with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/multicolor-pla
- Bambu Lab A1 with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/nebula-pla
- Bambu Lab A1 with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/opaque-pla
- Bambu Lab A1 with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/pearl-pla
- Bambu Lab A1 with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/petg
- Bambu Lab A1 with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/petg-cf
- Bambu Lab A1 with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/pla
- Bambu Lab A1 with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/pla-cf
- Bambu Lab A1 with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/pla-green-glow-in-the-dark
- Bambu Lab A1 with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/recycled-petg
- Bambu Lab A1 with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/recycled-pla
- Bambu Lab A1 with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/satin-pla
- Bambu Lab A1 with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/silk-petg
- Bambu Lab A1 with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/silk-pla
- Bambu Lab A1 with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/simply-petg
- Bambu Lab A1 with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/stainless-steel-metal-composite-pla
- Bambu Lab A1 with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/static-dissipative-carbon-fiber-pla
- Bambu Lab A1 with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/static-dissipative-petg
- Bambu Lab A1 with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/static-dissipative-pla
- Bambu Lab A1 with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/steel-metal-composite-pla
- Bambu Lab A1 with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/still-colorful-recycled-pla
- Bambu Lab A1 with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/thermochromic-pla
- Bambu Lab A1 with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/tpe
- Bambu Lab A1 with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/tpu
- Bambu Lab A1 with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/translucent-petg
- Bambu Lab A1 with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/protopasta/translucent-pla
- Bambu Lab A1 with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/asa
- Bambu Lab A1 with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/blend-silk-pla
- Bambu Lab A1 with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/matte-petg
- Bambu Lab A1 with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/mystic-premium-pla
- Bambu Lab A1 with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 115 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pa11-cf
- Bambu Lab A1 with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pc
- Bambu Lab A1 with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pc-blend
- Bambu Lab A1 with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pc-cf
- Bambu Lab A1 with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pei
- Bambu Lab A1 with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pei-1010
- Bambu Lab A1 with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/petg
- Bambu Lab A1 with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/prusament/petg-cf
- Bambu Lab A1 with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/petg-magnetite
- Bambu Lab A1 with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/petg-tungsten
- Bambu Lab A1 with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/petg-v0
- Bambu Lab A1 with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pla
- Bambu Lab A1 with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pla-recycled
- Bambu Lab A1 with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pla-woodfill
- Bambu Lab A1 with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pp-cf
- Bambu Lab A1 with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pp-gf
- Bambu Lab A1 with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/pvb
- Bambu Lab A1 with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/rpla
- Bambu Lab A1 with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/prusament/tpu-95a
- Bambu Lab A1 with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-abs-ht-hf
- Bambu Lab A1 with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-abs-cf-core
- Bambu Lab A1 with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-abs-gf
- Bambu Lab A1 with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-asa-gf
- Bambu Lab A1 with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-pet-cf
- Bambu Lab A1 with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-pet-gf
- Bambu Lab A1 with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-petg-cf-pro
- Bambu Lab A1 with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-ppa
- Bambu Lab A1 with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-ppa-cf
- Bambu Lab A1 with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-ppa-cf-core
- Bambu Lab A1 with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/fibreheart-tpu-gf
- Bambu Lab A1 with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/flex-tpu-64d
- Bambu Lab A1 with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/flex-tpu-85a
- Bambu Lab A1 with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/flex-tpu-air-85a
- Bambu Lab A1 with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/rebound-peba-85a
- Bambu Lab A1 with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/rebound-peba-95a
- Bambu Lab A1 with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/rebound-peba-air-95a
- Bambu Lab A1 with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/roamr-tpu-air-hr-80a
- Bambu Lab A1 with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/siraya-tech/roamr-tpu-air-hr-85a
- Bambu Lab A1 with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/95a-high-speed-tpu
- Bambu Lab A1 with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/abs
- Bambu Lab A1 with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/abs-fr
- Bambu Lab A1 with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/apla
- Bambu Lab A1 with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/asa
- Bambu Lab A1 with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/fluorescent-pla
- Bambu Lab A1 with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/glow-petg
- Bambu Lab A1 with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/glow-pla
- Bambu Lab A1 with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/high-speed-abs
- Bambu Lab A1 with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/high-speed-matte-petg
- Bambu Lab A1 with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/high-speed-matte-pla
- Bambu Lab A1 with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/high-speed-petg
- Bambu Lab A1 with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/high-speed-pla
- Bambu Lab A1 with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/high-speed-pla-marble
- Bambu Lab A1 with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/high-speed-pla-plus
- Bambu Lab A1 with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/luminous-glow-in-the-dark-petg
- Bambu Lab A1 with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/matte-petg-cf
- Bambu Lab A1 with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pa12-cf
- Bambu Lab A1 with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pa6-easy-pa
- Bambu Lab A1 with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pa6-cf
- Bambu Lab A1 with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pa6-gf
- Bambu Lab A1 with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pc
- Bambu Lab A1 with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pc-abs
- Bambu Lab A1 with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pcl
- Bambu Lab A1 with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/peek
- Bambu Lab A1 with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/petg
- Bambu Lab A1 with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/petg-2-0
- Bambu Lab A1 with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/petg-carbon-fiber
- Bambu Lab A1 with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/petg-glow-in-the-dark-filament
- Bambu Lab A1 with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla
- Bambu Lab A1 with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-carbon-fiber
- Bambu Lab A1 with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-cf
- Bambu Lab A1 with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-classic
- Bambu Lab A1 with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-galaxy
- Bambu Lab A1 with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-glow-in-the-dark
- Bambu Lab A1 with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-matte
- Bambu Lab A1 with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-matte-dual-color
- Bambu Lab A1 with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-rainbow
- Bambu Lab A1 with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-silk
- Bambu Lab A1 with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-transparent-rainbow
- Bambu Lab A1 with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-twinkling
- Bambu Lab A1 with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-wood
- Bambu Lab A1 with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-meta
- Bambu Lab A1 with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-plus
- Bambu Lab A1 with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pla-plus-2-0
- Bambu Lab A1 with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pp
- Bambu Lab A1 with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pva
- Bambu Lab A1 with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/pvb
- Bambu Lab A1 with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/real-wood-fiber-pla
- Bambu Lab A1 with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/silk-2-0
- Bambu Lab A1 with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/silk-pla-plus
- Bambu Lab A1 with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/silk-pla-plus-dual-color
- Bambu Lab A1 with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/silk-pla-plus-four-color
- Bambu Lab A1 with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/silk-pla-plus-rainbow
- Bambu Lab A1 with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/silk-pla-plus-tri-color
- Bambu Lab A1 with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/temperature-color-change-pla
- Bambu Lab A1 with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/tpu
- Bambu Lab A1 with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/tpu-silk
- Bambu Lab A1 with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/tpu90a
- Bambu Lab A1 with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/tpu95a
- Bambu Lab A1 with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/transparent-clear-pla
- Bambu Lab A1 with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1/sunlu/upgrade-pla
- Bambu Lab A1 mini with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/90a-flexible-peba
- Bambu Lab A1 mini with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/basic-matte-pla
- Bambu Lab A1 mini with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/basic-silk-pla
- Bambu Lab A1 mini with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/conductive-pla
- Bambu Lab A1 mini with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/crystal-transparent-pla
- Bambu Lab A1 mini with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/dual-color-matte-pla
- Bambu Lab A1 mini with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/dual-color-silk-pla
- Bambu Lab A1 mini with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Bambu Lab A1 mini with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/glow-pla
- Bambu Lab A1 mini with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/glow-tpu
- Bambu Lab A1 mini with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/high-speed-pla
- Bambu Lab A1 mini with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/marble-pla
- Bambu Lab A1 mini with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/matte-pla
- Bambu Lab A1 mini with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/peba
- Bambu Lab A1 mini with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/petg
- Bambu Lab A1 mini with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/pla
- Bambu Lab A1 mini with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/pla-cf
- Bambu Lab A1 mini with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/pla-metal
- Bambu Lab A1 mini with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/quad-color-silk-pla
- Bambu Lab A1 mini with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/rainbow-silk-pla
- Bambu Lab A1 mini with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/s-series-silk-pla
- Bambu Lab A1 mini with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/shiny-glitter-silk-pla
- Bambu Lab A1 mini with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/shiny-gradient-silk-pla
- Bambu Lab A1 mini with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/silk-gf-pla
- Bambu Lab A1 mini with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/silk-pla
- Bambu Lab A1 mini with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/temperature-color-change-pla
- Bambu Lab A1 mini with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/tpu
- Bambu Lab A1 mini with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/transparent-pla
- Bambu Lab A1 mini with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/triple-color-matte-pla
- Bambu Lab A1 mini with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/triple-color-silk-pla
- Bambu Lab A1 mini with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/uv-color-change-pla
- Bambu Lab A1 mini with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/amolen/wood-pla
- Bambu Lab A1 mini with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/abs
- Bambu Lab A1 mini with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/asa
- Bambu Lab A1 mini with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/high-speed-pla
- Bambu Lab A1 mini with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/petg
- Bambu Lab A1 mini with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-basic
- Bambu Lab A1 mini with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-galaxy
- Bambu Lab A1 mini with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-marble
- Bambu Lab A1 mini with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-matte
- Bambu Lab A1 mini with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-metal
- Bambu Lab A1 mini with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-plus
- Bambu Lab A1 mini with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-silk
- Bambu Lab A1 mini with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-silk-dual-tricolor
- Bambu Lab A1 mini with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/pla-special
- Bambu Lab A1 mini with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/tpu
- Bambu Lab A1 mini with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/anycubic/translucent-petg
- Bambu Lab A1 mini with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/abs
- Bambu Lab A1 mini with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/abs-gf
- Bambu Lab A1 mini with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/asa
- Bambu Lab A1 mini with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/asa-aero
- Bambu Lab A1 mini with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/asa-cf
- Bambu Lab A1 mini with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/matte-asa-cf
- Bambu Lab A1 mini with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pa12-cf
- Bambu Lab A1 mini with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pa6-cf
- Bambu Lab A1 mini with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pa6-gf
- Bambu Lab A1 mini with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/paht-cf
- Bambu Lab A1 mini with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pc
- Bambu Lab A1 mini with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pc-fr
- Bambu Lab A1 mini with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pet-cf
- Bambu Lab A1 mini with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/petg-basic
- Bambu Lab A1 mini with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/petg-hf
- Bambu Lab A1 mini with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/petg-matte
- Bambu Lab A1 mini with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/petg-translucent
- Bambu Lab A1 mini with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/petg-cf
- Bambu Lab A1 mini with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla
- Bambu Lab A1 mini with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-aero
- Bambu Lab A1 mini with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-basic
- Bambu Lab A1 mini with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-basic-gradient
- Bambu Lab A1 mini with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-galaxy
- Bambu Lab A1 mini with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-glow
- Bambu Lab A1 mini with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-lite
- Bambu Lab A1 mini with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-marble
- Bambu Lab A1 mini with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-matte
- Bambu Lab A1 mini with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-metal
- Bambu Lab A1 mini with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-pure
- Bambu Lab A1 mini with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-silk-dual-color
- Bambu Lab A1 mini with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-silk-multi-color
- Bambu Lab A1 mini with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-silk-plus
- Bambu Lab A1 mini with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-sparkle
- Bambu Lab A1 mini with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-tough-plus
- Bambu Lab A1 mini with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-translucent
- Bambu Lab A1 mini with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-wood
- Bambu Lab A1 mini with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pla-cf
- Bambu Lab A1 mini with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/ppa-cf
- Bambu Lab A1 mini with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pps-cf
- Bambu Lab A1 mini with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/pva
- Bambu Lab A1 mini with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/silk-pla
- Bambu Lab A1 mini with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/support-for-abs
- Bambu Lab A1 mini with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/support-for-pa-pet
- Bambu Lab A1 mini with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/support-for-pla
- Bambu Lab A1 mini with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/support-for-pla-petg
- Bambu Lab A1 mini with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/tpu
- Bambu Lab A1 mini with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/tpu-85a
- Bambu Lab A1 mini with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/tpu-90a
- Bambu Lab A1 mini with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/tpu-95a-hf
- Bambu Lab A1 mini with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/bambu-lab/tpu-for-ams
- Bambu Lab A1 mini with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/asa
- Bambu Lab A1 mini with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/cpe
- Bambu Lab A1 mini with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/economy-pla
- Bambu Lab A1 mini with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/glow-pha
- Bambu Lab A1 mini with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/high-speed-pla
- Bambu Lab A1 mini with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/lw-ht-pla
- Bambu Lab A1 mini with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/matte-pla
- Bambu Lab A1 mini with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/petg
- Bambu Lab A1 mini with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/pha
- Bambu Lab A1 mini with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/pha-pla
- Bambu Lab A1 mini with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/pla
- Bambu Lab A1 mini with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/r-semi-pla
- Bambu Lab A1 mini with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/semi-pla
- Bambu Lab A1 mini with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/silk-pla
- Bambu Lab A1 mini with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/stonefill-pla
- Bambu Lab A1 mini with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/colorfabb/tpu
- Bambu Lab A1 mini with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/95a-tpu
- Bambu Lab A1 mini with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/abs
- Bambu Lab A1 mini with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/cr-petg
- Bambu Lab A1 mini with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/cr-pla-carbon
- Bambu Lab A1 mini with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/ender-fast-pla
- Bambu Lab A1 mini with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/ender-pla-plus
- Bambu Lab A1 mini with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hp-asa
- Bambu Lab A1 mini with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hp-tpu
- Bambu Lab A1 mini with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-abs
- Bambu Lab A1 mini with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-luminous-pla
- Bambu Lab A1 mini with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-pa6-cf
- Bambu Lab A1 mini with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-pc
- Bambu Lab A1 mini with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-petg
- Bambu Lab A1 mini with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-pla
- Bambu Lab A1 mini with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-pla-cf
- Bambu Lab A1 mini with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/hyper-rainbow-pla
- Bambu Lab A1 mini with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/petg
- Bambu Lab A1 mini with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/pla
- Bambu Lab A1 mini with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/pla-cf
- Bambu Lab A1 mini with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/pla-cr-wood
- Bambu Lab A1 mini with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/ppa-cf
- Bambu Lab A1 mini with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/silk-pla
- Bambu Lab A1 mini with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/soleyin-basic-petg
- Bambu Lab A1 mini with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/creality/soleyin-ultra-pla
- Bambu Lab A1 mini with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/abs
- Bambu Lab A1 mini with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/asa
- Bambu Lab A1 mini with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/galaxy-pla
- Bambu Lab A1 mini with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/paht-cf
- Bambu Lab A1 mini with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pc
- Bambu Lab A1 mini with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pc-fr
- Bambu Lab A1 mini with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pet-cf
- Bambu Lab A1 mini with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/petg
- Bambu Lab A1 mini with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/petg-pro
- Bambu Lab A1 mini with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/petg-translucent
- Bambu Lab A1 mini with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/petg-cf
- Bambu Lab A1 mini with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/petg-gf
- Bambu Lab A1 mini with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla
- Bambu Lab A1 mini with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-basic
- Bambu Lab A1 mini with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-glow
- Bambu Lab A1 mini with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-marble
- Bambu Lab A1 mini with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-matte
- Bambu Lab A1 mini with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-metallic
- Bambu Lab A1 mini with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-plus
- Bambu Lab A1 mini with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-pro
- Bambu Lab A1 mini with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-sparkle
- Bambu Lab A1 mini with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-wood
- Bambu Lab A1 mini with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/pla-cf
- Bambu Lab A1 mini with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/rapid-petg
- Bambu Lab A1 mini with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/rapid-pla-plus
- Bambu Lab A1 mini with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/rapid-tpu-95a
- Bambu Lab A1 mini with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/silk-pla
- Bambu Lab A1 mini with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/elegoo/tpu-95a
- Bambu Lab A1 mini with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/abs
- Bambu Lab A1 mini with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/abs-high-speed
- Bambu Lab A1 mini with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/abs-cf
- Bambu Lab A1 mini with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/abs-gf
- Bambu Lab A1 mini with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/abs-pc
- Bambu Lab A1 mini with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/abs-plus
- Bambu Lab A1 mini with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/asa
- Bambu Lab A1 mini with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/asa-high-speed
- Bambu Lab A1 mini with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/asa-light-weight
- Bambu Lab A1 mini with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/asa-cf
- Bambu Lab A1 mini with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/asa-gf
- Bambu Lab A1 mini with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pa12-nylon
- Bambu Lab A1 mini with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pa12-cf
- Bambu Lab A1 mini with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pa12-gf
- Bambu Lab A1 mini with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pa6-cf
- Bambu Lab A1 mini with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pa6-gf
- Bambu Lab A1 mini with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/petg
- Bambu Lab A1 mini with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/petg-cf
- Bambu Lab A1 mini with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla
- Bambu Lab A1 mini with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-burnt-titanium
- Bambu Lab A1 mini with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-burnt-titanium-dual-color
- Bambu Lab A1 mini with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-burnt-titanium-rainbow
- Bambu Lab A1 mini with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-burnt-titanium-triple-color
- Bambu Lab A1 mini with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-galaxy
- Bambu Lab A1 mini with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-high-speed
- Bambu Lab A1 mini with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-light-weight
- Bambu Lab A1 mini with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-luminous
- Bambu Lab A1 mini with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-marble
- Bambu Lab A1 mini with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte
- Bambu Lab A1 mini with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte-dual-color
- Bambu Lab A1 mini with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte-gradient
- Bambu Lab A1 mini with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte-high-speed
- Bambu Lab A1 mini with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte-high-speed-gradient-multi-color
- Bambu Lab A1 mini with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte-high-speed-rock-rainbow
- Bambu Lab A1 mini with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte-high-speed-triple-color
- Bambu Lab A1 mini with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-matte-rainbow
- Bambu Lab A1 mini with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-metallic
- Bambu Lab A1 mini with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-rainbow
- Bambu Lab A1 mini with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-silk
- Bambu Lab A1 mini with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-silk-high-speed-dual-color
- Bambu Lab A1 mini with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-silk-high-speed-quadruple
- Bambu Lab A1 mini with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-silk-high-speed-triple-color
- Bambu Lab A1 mini with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-silk-rainbow
- Bambu Lab A1 mini with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-ultra-silk
- Bambu Lab A1 mini with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-wood
- Bambu Lab A1 mini with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-cf
- Bambu Lab A1 mini with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-plus
- Bambu Lab A1 mini with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pla-plus-high-speed
- Bambu Lab A1 mini with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pp
- Bambu Lab A1 mini with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/pp-cf
- Bambu Lab A1 mini with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/tpu
- Bambu Lab A1 mini with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/tpu-90a
- Bambu Lab A1 mini with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/tpu-high-speed
- Bambu Lab A1 mini with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/eryone/tpu-rainbow
- Bambu Lab A1 mini with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/abs-plus
- Bambu Lab A1 mini with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/abs-pluscf
- Bambu Lab A1 mini with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/abs-plushs
- Bambu Lab A1 mini with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/asa-plus
- Bambu Lab A1 mini with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/dark-twinkling-pla-magic
- Bambu Lab A1 mini with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/epaht-cf
- Bambu Lab A1 mini with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/epla-plushs
- Bambu Lab A1 mini with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/esun-petg-matte
- Bambu Lab A1 mini with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/mystic-silk-pla
- Bambu Lab A1 mini with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pa12-cf
- Bambu Lab A1 mini with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pa6-pa
- Bambu Lab A1 mini with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pa6-pa-cf
- Bambu Lab A1 mini with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/peak-pla
- Bambu Lab A1 mini with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pet
- Bambu Lab A1 mini with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/petg
- Bambu Lab A1 mini with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/petg-basic
- Bambu Lab A1 mini with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/petg-matte
- Bambu Lab A1 mini with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/petg-pluscf
- Bambu Lab A1 mini with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/petg-plushs
- Bambu Lab A1 mini with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-basic
- Bambu Lab A1 mini with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-cf
- Bambu Lab A1 mini with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-chameleon
- Bambu Lab A1 mini with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-hs
- Bambu Lab A1 mini with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-lite
- Bambu Lab A1 mini with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-luminous
- Bambu Lab A1 mini with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-luminous-rainbow
- Bambu Lab A1 mini with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-lw
- Bambu Lab A1 mini with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-marble
- Bambu Lab A1 mini with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-matte
- Bambu Lab A1 mini with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-metal
- Bambu Lab A1 mini with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-silk
- Bambu Lab A1 mini with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-silk-candy
- Bambu Lab A1 mini with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-silk-magic
- Bambu Lab A1 mini with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-silk-metal
- Bambu Lab A1 mini with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-silk-rainbow
- Bambu Lab A1 mini with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-st
- Bambu Lab A1 mini with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-stars
- Bambu Lab A1 mini with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-wood
- Bambu Lab A1 mini with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-plus
- Bambu Lab A1 mini with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pla-plus-cmyk
- Bambu Lab A1 mini with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/pva
- Bambu Lab A1 mini with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/silk-petg
- Bambu Lab A1 mini with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/tpe-83a
- Bambu Lab A1 mini with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/tpu-95a
- Bambu Lab A1 mini with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/tpu-lw
- Bambu Lab A1 mini with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/esun-3d/uv-change-pla-uv-color-change
- Bambu Lab A1 mini with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/basic-pla
- Bambu Lab A1 mini with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/biofusion-pla
- Bambu Lab A1 mini with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/biofusion-silk-pla
- Bambu Lab A1 mini with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/durapro-abs
- Bambu Lab A1 mini with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/durapro-asa
- Bambu Lab A1 mini with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/durapro-cf-pa12
- Bambu Lab A1 mini with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/durapro-matte-asa
- Bambu Lab A1 mini with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/durapro-pa12
- Bambu Lab A1 mini with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/durapro-pbt-pc
- Bambu Lab A1 mini with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/flax-pla
- Bambu Lab A1 mini with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/flex-hard-cf-tpu
- Bambu Lab A1 mini with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/flex-hard-tpu
- Bambu Lab A1 mini with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/flex-medium-tpu
- Bambu Lab A1 mini with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/flex-semisoft-tpu
- Bambu Lab A1 mini with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/glow-petg
- Bambu Lab A1 mini with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/greentec-matte-pla
- Bambu Lab A1 mini with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/greentec-pla
- Bambu Lab A1 mini with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/pctg
- Bambu Lab A1 mini with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/pearl-pla
- Bambu Lab A1 mini with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/petg
- Bambu Lab A1 mini with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/pla-nx2-matt
- Bambu Lab A1 mini with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/extrudr/wood-pla
- Bambu Lab A1 mini with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/fillamentum/asa-extrafill
- Bambu Lab A1 mini with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/fillamentum/cpe-hg100
- Bambu Lab A1 mini with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/fillamentum/pla-crystal-clear
- Bambu Lab A1 mini with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/fillamentum/pla-extrafill
- Bambu Lab A1 mini with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/abs
- Bambu Lab A1 mini with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/glow-abs
- Bambu Lab A1 mini with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/glow-pla
- Bambu Lab A1 mini with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/metallic-finish-pla
- Bambu Lab A1 mini with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/petg
- Bambu Lab A1 mini with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/pla
- Bambu Lab A1 mini with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/pla-basic
- Bambu Lab A1 mini with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/pla-cf
- Bambu Lab A1 mini with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/pla-matte
- Bambu Lab A1 mini with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/pla-max
- Bambu Lab A1 mini with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/pla-metal
- Bambu Lab A1 mini with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/pla-pro
- Bambu Lab A1 mini with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/silk-pla
- Bambu Lab A1 mini with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/tpu
- Bambu Lab A1 mini with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/transparent-pla
- Bambu Lab A1 mini with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/uv-color-changing-pla
- Bambu Lab A1 mini with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/hatchbox/wood-pla
- Bambu Lab A1 mini with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/abs
- Bambu Lab A1 mini with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/carbon-fiber-nylon
- Bambu Lab A1 mini with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/galaxy-pla
- Bambu Lab A1 mini with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/glow-abs
- Bambu Lab A1 mini with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/high-speed-pla-plus
- Bambu Lab A1 mini with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/petg-plus
- Bambu Lab A1 mini with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla
- Bambu Lab A1 mini with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla-basic
- Bambu Lab A1 mini with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla-chameleon
- Bambu Lab A1 mini with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla-glitter-rainbow
- Bambu Lab A1 mini with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla-matte
- Bambu Lab A1 mini with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla-mystic-silk
- Bambu Lab A1 mini with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla-silk-rainbow
- Bambu Lab A1 mini with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/pla-plus
- Bambu Lab A1 mini with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/silk-pla
- Bambu Lab A1 mini with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/inland/tpu
- Bambu Lab A1 mini with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/jayo/high-speed-matte-pla
- Bambu Lab A1 mini with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/jayo/matte-pla
- Bambu Lab A1 mini with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/jayo/petg
- Bambu Lab A1 mini with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/jayo/pla
- Bambu Lab A1 mini with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/jayo/pla-plus
- Bambu Lab A1 mini with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/jayo/silk-pla
- Bambu Lab A1 mini with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/jayo/tpu
- Bambu Lab A1 mini with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/abs
- Bambu Lab A1 mini with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/glow-pla
- Bambu Lab A1 mini with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/high-speed-petg
- Bambu Lab A1 mini with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/high-speed-pla
- Bambu Lab A1 mini with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/matte-pla
- Bambu Lab A1 mini with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/petg
- Bambu Lab A1 mini with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/petg-cf
- Bambu Lab A1 mini with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/pla
- Bambu Lab A1 mini with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/pla-basic
- Bambu Lab A1 mini with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/pla-cf
- Bambu Lab A1 mini with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/silk-pla
- Bambu Lab A1 mini with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/kingroon/tpu
- Bambu Lab A1 mini with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/abs
- Bambu Lab A1 mini with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/abs-basic
- Bambu Lab A1 mini with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/asa
- Bambu Lab A1 mini with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/asa-basic
- Bambu Lab A1 mini with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/easy-nylon
- Bambu Lab A1 mini with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/glow-abs
- Bambu Lab A1 mini with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/glow-pla
- Bambu Lab A1 mini with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/high-speed-petg
- Bambu Lab A1 mini with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/high-speed-pla
- Bambu Lab A1 mini with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/high-speed-tpu
- Bambu Lab A1 mini with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/luminous-high-speed-glow-tpu
- Bambu Lab A1 mini with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/matte-pla
- Bambu Lab A1 mini with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pc
- Bambu Lab A1 mini with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pc-professional
- Bambu Lab A1 mini with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/petg
- Bambu Lab A1 mini with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/petg-basic
- Bambu Lab A1 mini with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/petg-refill
- Bambu Lab A1 mini with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla
- Bambu Lab A1 mini with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-air
- Bambu Lab A1 mini with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-cf
- Bambu Lab A1 mini with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-cream
- Bambu Lab A1 mini with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-easy
- Bambu Lab A1 mini with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-easy-glow
- Bambu Lab A1 mini with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-plus
- Bambu Lab A1 mini with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-professional
- Bambu Lab A1 mini with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-refill
- Bambu Lab A1 mini with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-rock
- Bambu Lab A1 mini with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-super
- Bambu Lab A1 mini with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/pla-turbo-rapid
- Bambu Lab A1 mini with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/shimmer-pla
- Bambu Lab A1 mini with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/silk-pla
- Bambu Lab A1 mini with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/overture/tpu
- Bambu Lab A1 mini with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/abs
- Bambu Lab A1 mini with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/asa
- Bambu Lab A1 mini with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/cpe
- Bambu Lab A1 mini with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/creator-special-edition-pla
- Bambu Lab A1 mini with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/draft-pla
- Bambu Lab A1 mini with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/dual-panchroma-matte-pla
- Bambu Lab A1 mini with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/for-production-matte-pla
- Bambu Lab A1 mini with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/glow-pla
- Bambu Lab A1 mini with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/gradient-panchroma-pla
- Bambu Lab A1 mini with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/ht-pla-pro
- Bambu Lab A1 mini with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/ht-pla
- Bambu Lab A1 mini with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/ht-pla-gf
- Bambu Lab A1 mini with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/lw-polylite-pla
- Bambu Lab A1 mini with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/metallic-polylite-pla
- Bambu Lab A1 mini with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/metallic-polylite-silk-abs
- Bambu Lab A1 mini with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/metallic-polylite-silk-pla
- Bambu Lab A1 mini with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/muted-panchroma-matte-pla
- Bambu Lab A1 mini with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/neon-panchroma-pla
- Bambu Lab A1 mini with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pa12-cf
- Bambu Lab A1 mini with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pa6-cf
- Bambu Lab A1 mini with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pa6-gf
- Bambu Lab A1 mini with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/panchroma-cope
- Bambu Lab A1 mini with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/panchroma-glow-pla
- Bambu Lab A1 mini with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/panchroma-pla
- Bambu Lab A1 mini with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/panchroma-silk-pla
- Bambu Lab A1 mini with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pc
- Bambu Lab A1 mini with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pc-abs
- Bambu Lab A1 mini with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pc-pbt
- Bambu Lab A1 mini with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pet-cf
- Bambu Lab A1 mini with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/petg
- Bambu Lab A1 mini with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/petg-cf
- Bambu Lab A1 mini with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pla
- Bambu Lab A1 mini with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pla-cf
- Bambu Lab A1 mini with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pla-polycast
- Bambu Lab A1 mini with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polyflex-95-hf-high-speed-tpu
- Bambu Lab A1 mini with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polyflex-tpu
- Bambu Lab A1 mini with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polylite-abs
- Bambu Lab A1 mini with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polylite-asa
- Bambu Lab A1 mini with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polylite-pc
- Bambu Lab A1 mini with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polylite-petg
- Bambu Lab A1 mini with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polylite-pla
- Bambu Lab A1 mini with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polylite-pla-cf
- Bambu Lab A1 mini with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polymaker-pla-pro
- Bambu Lab A1 mini with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polymax-pc
- Bambu Lab A1 mini with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polymax-petg
- Bambu Lab A1 mini with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polymax-pla
- Bambu Lab A1 mini with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polymide-copa-pa6
- Bambu Lab A1 mini with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polysmooth
- Bambu Lab A1 mini with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polysonic-pla
- Bambu Lab A1 mini with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/polysupport-for-pla
- Bambu Lab A1 mini with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pps-cf
- Bambu Lab A1 mini with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pva
- Bambu Lab A1 mini with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pva-polydissolve-s1
- Bambu Lab A1 mini with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pva-polysupport-for-pa12
- Bambu Lab A1 mini with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/pvb
- Bambu Lab A1 mini with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/satin-panchroma-pla
- Bambu Lab A1 mini with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/silk-abs
- Bambu Lab A1 mini with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/silk-pla
- Bambu Lab A1 mini with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/polymaker/wood-pla
- Bambu Lab A1 mini with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/basic-pla
- Bambu Lab A1 mini with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/conductive-pla
- Bambu Lab A1 mini with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/fiber-ht-matte-pla
- Bambu Lab A1 mini with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/fluorescent-pla
- Bambu Lab A1 mini with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/glitter-petg
- Bambu Lab A1 mini with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/glitter-pla
- Bambu Lab A1 mini with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/glow-pla
- Bambu Lab A1 mini with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/high-speed-pla
- Bambu Lab A1 mini with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/iron-metal-composite-pla
- Bambu Lab A1 mini with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/marble-pla
- Bambu Lab A1 mini with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/matte-pla
- Bambu Lab A1 mini with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/metal-composite-pla
- Bambu Lab A1 mini with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/metallic-petg
- Bambu Lab A1 mini with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/metallic-pla
- Bambu Lab A1 mini with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/multicolor-pla
- Bambu Lab A1 mini with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/nebula-pla
- Bambu Lab A1 mini with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/opaque-pla
- Bambu Lab A1 mini with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/pearl-pla
- Bambu Lab A1 mini with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/petg
- Bambu Lab A1 mini with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/petg-cf
- Bambu Lab A1 mini with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/pla
- Bambu Lab A1 mini with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/pla-cf
- Bambu Lab A1 mini with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/pla-green-glow-in-the-dark
- Bambu Lab A1 mini with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/recycled-petg
- Bambu Lab A1 mini with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/recycled-pla
- Bambu Lab A1 mini with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/satin-pla
- Bambu Lab A1 mini with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/silk-petg
- Bambu Lab A1 mini with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/silk-pla
- Bambu Lab A1 mini with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/simply-petg
- Bambu Lab A1 mini with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/stainless-steel-metal-composite-pla
- Bambu Lab A1 mini with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/static-dissipative-carbon-fiber-pla
- Bambu Lab A1 mini with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/static-dissipative-petg
- Bambu Lab A1 mini with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/static-dissipative-pla
- Bambu Lab A1 mini with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/steel-metal-composite-pla
- Bambu Lab A1 mini with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/still-colorful-recycled-pla
- Bambu Lab A1 mini with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/thermochromic-pla
- Bambu Lab A1 mini with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/tpe
- Bambu Lab A1 mini with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/tpu
- Bambu Lab A1 mini with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/translucent-petg
- Bambu Lab A1 mini with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/protopasta/translucent-pla
- Bambu Lab A1 mini with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/asa
- Bambu Lab A1 mini with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/blend-silk-pla
- Bambu Lab A1 mini with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/matte-petg
- Bambu Lab A1 mini with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/mystic-premium-pla
- Bambu Lab A1 mini with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 95 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pa11-cf
- Bambu Lab A1 mini with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pc
- Bambu Lab A1 mini with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pc-blend
- Bambu Lab A1 mini with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pc-cf
- Bambu Lab A1 mini with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pei
- Bambu Lab A1 mini with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pei-1010
- Bambu Lab A1 mini with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/petg
- Bambu Lab A1 mini with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/petg-cf
- Bambu Lab A1 mini with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/petg-magnetite
- Bambu Lab A1 mini with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/petg-tungsten
- Bambu Lab A1 mini with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/petg-v0
- Bambu Lab A1 mini with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pla
- Bambu Lab A1 mini with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pla-recycled
- Bambu Lab A1 mini with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pla-woodfill
- Bambu Lab A1 mini with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 85 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pp-cf
- Bambu Lab A1 mini with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pp-gf
- Bambu Lab A1 mini with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/pvb
- Bambu Lab A1 mini with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/rpla
- Bambu Lab A1 mini with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/prusament/tpu-95a
- Bambu Lab A1 mini with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-abs-ht-hf
- Bambu Lab A1 mini with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-abs-cf-core
- Bambu Lab A1 mini with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-abs-gf
- Bambu Lab A1 mini with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-asa-gf
- Bambu Lab A1 mini with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-pet-cf
- Bambu Lab A1 mini with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-pet-gf
- Bambu Lab A1 mini with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-petg-cf-pro
- Bambu Lab A1 mini with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-ppa
- Bambu Lab A1 mini with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-ppa-cf
- Bambu Lab A1 mini with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-ppa-cf-core
- Bambu Lab A1 mini with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/fibreheart-tpu-gf
- Bambu Lab A1 mini with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/flex-tpu-64d
- Bambu Lab A1 mini with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/flex-tpu-85a
- Bambu Lab A1 mini with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/flex-tpu-air-85a
- Bambu Lab A1 mini with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/rebound-peba-85a
- Bambu Lab A1 mini with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/rebound-peba-95a
- Bambu Lab A1 mini with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/rebound-peba-air-95a
- Bambu Lab A1 mini with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/roamr-tpu-air-hr-80a
- Bambu Lab A1 mini with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/siraya-tech/roamr-tpu-air-hr-85a
- Bambu Lab A1 mini with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/95a-high-speed-tpu
- Bambu Lab A1 mini with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/abs
- Bambu Lab A1 mini with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/abs-fr
- Bambu Lab A1 mini with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/apla
- Bambu Lab A1 mini with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/asa
- Bambu Lab A1 mini with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/fluorescent-pla
- Bambu Lab A1 mini with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/glow-petg
- Bambu Lab A1 mini with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/glow-pla
- Bambu Lab A1 mini with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/high-speed-abs
- Bambu Lab A1 mini with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/high-speed-matte-petg
- Bambu Lab A1 mini with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/high-speed-matte-pla
- Bambu Lab A1 mini with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/high-speed-petg
- Bambu Lab A1 mini with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/high-speed-pla
- Bambu Lab A1 mini with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/high-speed-pla-marble
- Bambu Lab A1 mini with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/high-speed-pla-plus
- Bambu Lab A1 mini with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/luminous-glow-in-the-dark-petg
- Bambu Lab A1 mini with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/matte-petg-cf
- Bambu Lab A1 mini with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pa12-cf
- Bambu Lab A1 mini with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pa6-easy-pa
- Bambu Lab A1 mini with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pa6-cf
- Bambu Lab A1 mini with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pa6-gf
- Bambu Lab A1 mini with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pc
- Bambu Lab A1 mini with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pc-abs
- Bambu Lab A1 mini with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pcl
- Bambu Lab A1 mini with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/peek
- Bambu Lab A1 mini with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/petg
- Bambu Lab A1 mini with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/petg-2-0
- Bambu Lab A1 mini with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/petg-carbon-fiber
- Bambu Lab A1 mini with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/petg-glow-in-the-dark-filament
- Bambu Lab A1 mini with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla
- Bambu Lab A1 mini with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-carbon-fiber
- Bambu Lab A1 mini with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-cf
- Bambu Lab A1 mini with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-classic
- Bambu Lab A1 mini with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-galaxy
- Bambu Lab A1 mini with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-glow-in-the-dark
- Bambu Lab A1 mini with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-matte
- Bambu Lab A1 mini with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-matte-dual-color
- Bambu Lab A1 mini with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-rainbow
- Bambu Lab A1 mini with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-silk
- Bambu Lab A1 mini with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-transparent-rainbow
- Bambu Lab A1 mini with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-twinkling
- Bambu Lab A1 mini with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-wood
- Bambu Lab A1 mini with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-meta
- Bambu Lab A1 mini with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-plus
- Bambu Lab A1 mini with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pla-plus-2-0
- Bambu Lab A1 mini with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pp
- Bambu Lab A1 mini with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pva
- Bambu Lab A1 mini with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/pvb
- Bambu Lab A1 mini with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/real-wood-fiber-pla
- Bambu Lab A1 mini with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/silk-2-0
- Bambu Lab A1 mini with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/silk-pla-plus
- Bambu Lab A1 mini with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/silk-pla-plus-dual-color
- Bambu Lab A1 mini with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/silk-pla-plus-four-color
- Bambu Lab A1 mini with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/silk-pla-plus-rainbow
- Bambu Lab A1 mini with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/silk-pla-plus-tri-color
- Bambu Lab A1 mini with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/temperature-color-change-pla
- Bambu Lab A1 mini with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/tpu
- Bambu Lab A1 mini with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/tpu-silk
- Bambu Lab A1 mini with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/tpu90a
- Bambu Lab A1 mini with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/tpu95a
- Bambu Lab A1 mini with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/transparent-clear-pla
- Bambu Lab A1 mini with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-a1-mini/sunlu/upgrade-pla
- Bambu Lab P1P with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/90a-flexible-peba
- Bambu Lab P1P with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/basic-matte-pla
- Bambu Lab P1P with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/basic-silk-pla
- Bambu Lab P1P with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/conductive-pla
- Bambu Lab P1P with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/crystal-transparent-pla
- Bambu Lab P1P with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/dual-color-matte-pla
- Bambu Lab P1P with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/dual-color-silk-pla
- Bambu Lab P1P with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Bambu Lab P1P with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/glow-pla
- Bambu Lab P1P with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/glow-tpu
- Bambu Lab P1P with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/high-speed-pla
- Bambu Lab P1P with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/marble-pla
- Bambu Lab P1P with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/matte-pla
- Bambu Lab P1P with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/peba
- Bambu Lab P1P with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/petg
- Bambu Lab P1P with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/pla
- Bambu Lab P1P with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/pla-cf
- Bambu Lab P1P with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/pla-metal
- Bambu Lab P1P with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/quad-color-silk-pla
- Bambu Lab P1P with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/rainbow-silk-pla
- Bambu Lab P1P with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/s-series-silk-pla
- Bambu Lab P1P with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/shiny-glitter-silk-pla
- Bambu Lab P1P with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/shiny-gradient-silk-pla
- Bambu Lab P1P with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/silk-gf-pla
- Bambu Lab P1P with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/silk-pla
- Bambu Lab P1P with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/temperature-color-change-pla
- Bambu Lab P1P with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/tpu
- Bambu Lab P1P with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/transparent-pla
- Bambu Lab P1P with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/triple-color-matte-pla
- Bambu Lab P1P with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/triple-color-silk-pla
- Bambu Lab P1P with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/uv-color-change-pla
- Bambu Lab P1P with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/amolen/wood-pla
- Bambu Lab P1P with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/abs
- Bambu Lab P1P with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/asa
- Bambu Lab P1P with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/high-speed-pla
- Bambu Lab P1P with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/petg
- Bambu Lab P1P with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-basic
- Bambu Lab P1P with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-galaxy
- Bambu Lab P1P with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-marble
- Bambu Lab P1P with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-matte
- Bambu Lab P1P with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-metal
- Bambu Lab P1P with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-plus
- Bambu Lab P1P with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-silk
- Bambu Lab P1P with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-silk-dual-tricolor
- Bambu Lab P1P with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/pla-special
- Bambu Lab P1P with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/tpu
- Bambu Lab P1P with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/anycubic/translucent-petg
- Bambu Lab P1P with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/abs
- Bambu Lab P1P with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/abs-gf
- Bambu Lab P1P with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/asa
- Bambu Lab P1P with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/asa-aero
- Bambu Lab P1P with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/asa-cf
- Bambu Lab P1P with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/matte-asa-cf
- Bambu Lab P1P with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pa12-cf
- Bambu Lab P1P with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pa6-cf
- Bambu Lab P1P with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pa6-gf
- Bambu Lab P1P with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/paht-cf
- Bambu Lab P1P with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pc
- Bambu Lab P1P with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pc-fr
- Bambu Lab P1P with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pet-cf
- Bambu Lab P1P with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/petg-basic
- Bambu Lab P1P with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/petg-hf
- Bambu Lab P1P with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/petg-matte
- Bambu Lab P1P with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/petg-translucent
- Bambu Lab P1P with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/petg-cf
- Bambu Lab P1P with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla
- Bambu Lab P1P with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-aero
- Bambu Lab P1P with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-basic
- Bambu Lab P1P with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-basic-gradient
- Bambu Lab P1P with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-galaxy
- Bambu Lab P1P with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-glow
- Bambu Lab P1P with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-lite
- Bambu Lab P1P with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-marble
- Bambu Lab P1P with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-matte
- Bambu Lab P1P with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-metal
- Bambu Lab P1P with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-pure
- Bambu Lab P1P with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-silk-dual-color
- Bambu Lab P1P with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-silk-multi-color
- Bambu Lab P1P with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-silk-plus
- Bambu Lab P1P with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-sparkle
- Bambu Lab P1P with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-tough-plus
- Bambu Lab P1P with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-translucent
- Bambu Lab P1P with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-wood
- Bambu Lab P1P with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pla-cf
- Bambu Lab P1P with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/ppa-cf
- Bambu Lab P1P with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pps-cf
- Bambu Lab P1P with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/pva
- Bambu Lab P1P with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/silk-pla
- Bambu Lab P1P with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/support-for-abs
- Bambu Lab P1P with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/support-for-pa-pet
- Bambu Lab P1P with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/support-for-pla
- Bambu Lab P1P with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/support-for-pla-petg
- Bambu Lab P1P with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/tpu
- Bambu Lab P1P with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/tpu-85a
- Bambu Lab P1P with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/tpu-90a
- Bambu Lab P1P with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/tpu-95a-hf
- Bambu Lab P1P with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/bambu-lab/tpu-for-ams
- Bambu Lab P1P with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/asa
- Bambu Lab P1P with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/cpe
- Bambu Lab P1P with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/economy-pla
- Bambu Lab P1P with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/glow-pha
- Bambu Lab P1P with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/high-speed-pla
- Bambu Lab P1P with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/lw-ht-pla
- Bambu Lab P1P with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/matte-pla
- Bambu Lab P1P with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/petg
- Bambu Lab P1P with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/pha
- Bambu Lab P1P with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/pha-pla
- Bambu Lab P1P with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/pla
- Bambu Lab P1P with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/r-semi-pla
- Bambu Lab P1P with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/semi-pla
- Bambu Lab P1P with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/silk-pla
- Bambu Lab P1P with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/stonefill-pla
- Bambu Lab P1P with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/colorfabb/tpu
- Bambu Lab P1P with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/95a-tpu
- Bambu Lab P1P with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/abs
- Bambu Lab P1P with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/cr-petg
- Bambu Lab P1P with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/cr-pla-carbon
- Bambu Lab P1P with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/ender-fast-pla
- Bambu Lab P1P with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/ender-pla-plus
- Bambu Lab P1P with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hp-asa
- Bambu Lab P1P with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hp-tpu
- Bambu Lab P1P with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-abs
- Bambu Lab P1P with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-luminous-pla
- Bambu Lab P1P with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-pa6-cf
- Bambu Lab P1P with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-pc
- Bambu Lab P1P with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-petg
- Bambu Lab P1P with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-pla
- Bambu Lab P1P with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-pla-cf
- Bambu Lab P1P with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/hyper-rainbow-pla
- Bambu Lab P1P with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/petg
- Bambu Lab P1P with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/pla
- Bambu Lab P1P with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/creality/pla-cf
- Bambu Lab P1P with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/pla-cr-wood
- Bambu Lab P1P with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/creality/ppa-cf
- Bambu Lab P1P with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/silk-pla
- Bambu Lab P1P with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/soleyin-basic-petg
- Bambu Lab P1P with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/creality/soleyin-ultra-pla
- Bambu Lab P1P with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/abs
- Bambu Lab P1P with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/asa
- Bambu Lab P1P with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/galaxy-pla
- Bambu Lab P1P with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/paht-cf
- Bambu Lab P1P with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pc
- Bambu Lab P1P with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pc-fr
- Bambu Lab P1P with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pet-cf
- Bambu Lab P1P with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/petg
- Bambu Lab P1P with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/petg-pro
- Bambu Lab P1P with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/petg-translucent
- Bambu Lab P1P with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/petg-cf
- Bambu Lab P1P with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/petg-gf
- Bambu Lab P1P with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla
- Bambu Lab P1P with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-basic
- Bambu Lab P1P with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-glow
- Bambu Lab P1P with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-marble
- Bambu Lab P1P with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-matte
- Bambu Lab P1P with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-metallic
- Bambu Lab P1P with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-plus
- Bambu Lab P1P with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-pro
- Bambu Lab P1P with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-sparkle
- Bambu Lab P1P with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-wood
- Bambu Lab P1P with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/pla-cf
- Bambu Lab P1P with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/rapid-petg
- Bambu Lab P1P with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/rapid-pla-plus
- Bambu Lab P1P with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/rapid-tpu-95a
- Bambu Lab P1P with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/silk-pla
- Bambu Lab P1P with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/elegoo/tpu-95a
- Bambu Lab P1P with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/abs
- Bambu Lab P1P with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/abs-high-speed
- Bambu Lab P1P with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/abs-cf
- Bambu Lab P1P with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/abs-gf
- Bambu Lab P1P with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/abs-pc
- Bambu Lab P1P with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/abs-plus
- Bambu Lab P1P with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/asa
- Bambu Lab P1P with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/asa-high-speed
- Bambu Lab P1P with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/asa-light-weight
- Bambu Lab P1P with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/asa-cf
- Bambu Lab P1P with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/asa-gf
- Bambu Lab P1P with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pa12-nylon
- Bambu Lab P1P with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pa12-cf
- Bambu Lab P1P with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pa12-gf
- Bambu Lab P1P with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pa6-cf
- Bambu Lab P1P with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pa6-gf
- Bambu Lab P1P with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/petg
- Bambu Lab P1P with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/petg-cf
- Bambu Lab P1P with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla
- Bambu Lab P1P with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-burnt-titanium
- Bambu Lab P1P with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-burnt-titanium-dual-color
- Bambu Lab P1P with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-burnt-titanium-rainbow
- Bambu Lab P1P with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-burnt-titanium-triple-color
- Bambu Lab P1P with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-galaxy
- Bambu Lab P1P with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-high-speed
- Bambu Lab P1P with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-light-weight
- Bambu Lab P1P with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-luminous
- Bambu Lab P1P with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-marble
- Bambu Lab P1P with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte
- Bambu Lab P1P with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte-dual-color
- Bambu Lab P1P with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte-gradient
- Bambu Lab P1P with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte-high-speed
- Bambu Lab P1P with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte-high-speed-gradient-multi-color
- Bambu Lab P1P with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte-high-speed-rock-rainbow
- Bambu Lab P1P with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte-high-speed-triple-color
- Bambu Lab P1P with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-matte-rainbow
- Bambu Lab P1P with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-metallic
- Bambu Lab P1P with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-rainbow
- Bambu Lab P1P with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-silk
- Bambu Lab P1P with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-silk-high-speed-dual-color
- Bambu Lab P1P with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-silk-high-speed-quadruple
- Bambu Lab P1P with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-silk-high-speed-triple-color
- Bambu Lab P1P with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-silk-rainbow
- Bambu Lab P1P with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-ultra-silk
- Bambu Lab P1P with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-wood
- Bambu Lab P1P with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-cf
- Bambu Lab P1P with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-plus
- Bambu Lab P1P with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pla-plus-high-speed
- Bambu Lab P1P with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pp
- Bambu Lab P1P with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/pp-cf
- Bambu Lab P1P with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/tpu
- Bambu Lab P1P with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/tpu-90a
- Bambu Lab P1P with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/tpu-high-speed
- Bambu Lab P1P with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/eryone/tpu-rainbow
- Bambu Lab P1P with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/abs-plus
- Bambu Lab P1P with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/abs-pluscf
- Bambu Lab P1P with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/abs-plushs
- Bambu Lab P1P with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/asa-plus
- Bambu Lab P1P with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/dark-twinkling-pla-magic
- Bambu Lab P1P with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/epaht-cf
- Bambu Lab P1P with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/epla-plushs
- Bambu Lab P1P with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/esun-petg-matte
- Bambu Lab P1P with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/mystic-silk-pla
- Bambu Lab P1P with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pa12-cf
- Bambu Lab P1P with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pa6-pa
- Bambu Lab P1P with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pa6-pa-cf
- Bambu Lab P1P with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/peak-pla
- Bambu Lab P1P with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pet
- Bambu Lab P1P with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/petg
- Bambu Lab P1P with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/petg-basic
- Bambu Lab P1P with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/petg-matte
- Bambu Lab P1P with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/petg-pluscf
- Bambu Lab P1P with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/petg-plushs
- Bambu Lab P1P with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-basic
- Bambu Lab P1P with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-cf
- Bambu Lab P1P with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-chameleon
- Bambu Lab P1P with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-hs
- Bambu Lab P1P with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-lite
- Bambu Lab P1P with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-luminous
- Bambu Lab P1P with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-luminous-rainbow
- Bambu Lab P1P with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-lw
- Bambu Lab P1P with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-marble
- Bambu Lab P1P with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-matte
- Bambu Lab P1P with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-metal
- Bambu Lab P1P with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-silk
- Bambu Lab P1P with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-silk-candy
- Bambu Lab P1P with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-silk-magic
- Bambu Lab P1P with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-silk-metal
- Bambu Lab P1P with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-silk-rainbow
- Bambu Lab P1P with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-st
- Bambu Lab P1P with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-stars
- Bambu Lab P1P with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-wood
- Bambu Lab P1P with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-plus
- Bambu Lab P1P with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pla-plus-cmyk
- Bambu Lab P1P with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/pva
- Bambu Lab P1P with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/silk-petg
- Bambu Lab P1P with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/tpe-83a
- Bambu Lab P1P with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/tpu-95a
- Bambu Lab P1P with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/tpu-lw
- Bambu Lab P1P with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/esun-3d/uv-change-pla-uv-color-change
- Bambu Lab P1P with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/basic-pla
- Bambu Lab P1P with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/biofusion-pla
- Bambu Lab P1P with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/biofusion-silk-pla
- Bambu Lab P1P with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/durapro-abs
- Bambu Lab P1P with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/durapro-asa
- Bambu Lab P1P with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/durapro-cf-pa12
- Bambu Lab P1P with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/durapro-matte-asa
- Bambu Lab P1P with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/durapro-pa12
- Bambu Lab P1P with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/durapro-pbt-pc
- Bambu Lab P1P with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/flax-pla
- Bambu Lab P1P with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/flex-hard-cf-tpu
- Bambu Lab P1P with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/flex-hard-tpu
- Bambu Lab P1P with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/flex-medium-tpu
- Bambu Lab P1P with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/flex-semisoft-tpu
- Bambu Lab P1P with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/glow-petg
- Bambu Lab P1P with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/greentec-matte-pla
- Bambu Lab P1P with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/greentec-pla
- Bambu Lab P1P with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/pctg
- Bambu Lab P1P with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/pearl-pla
- Bambu Lab P1P with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/petg
- Bambu Lab P1P with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/pla-nx2-matt
- Bambu Lab P1P with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/extrudr/wood-pla
- Bambu Lab P1P with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/fillamentum/asa-extrafill
- Bambu Lab P1P with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/fillamentum/cpe-hg100
- Bambu Lab P1P with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/fillamentum/pla-crystal-clear
- Bambu Lab P1P with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/fillamentum/pla-extrafill
- Bambu Lab P1P with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/abs
- Bambu Lab P1P with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/glow-abs
- Bambu Lab P1P with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/glow-pla
- Bambu Lab P1P with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/metallic-finish-pla
- Bambu Lab P1P with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/petg
- Bambu Lab P1P with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/pla
- Bambu Lab P1P with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/pla-basic
- Bambu Lab P1P with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/pla-cf
- Bambu Lab P1P with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/pla-matte
- Bambu Lab P1P with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/pla-max
- Bambu Lab P1P with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/pla-metal
- Bambu Lab P1P with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/pla-pro
- Bambu Lab P1P with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/silk-pla
- Bambu Lab P1P with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/tpu
- Bambu Lab P1P with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/transparent-pla
- Bambu Lab P1P with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/uv-color-changing-pla
- Bambu Lab P1P with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/hatchbox/wood-pla
- Bambu Lab P1P with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/abs
- Bambu Lab P1P with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/carbon-fiber-nylon
- Bambu Lab P1P with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/galaxy-pla
- Bambu Lab P1P with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/glow-abs
- Bambu Lab P1P with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/high-speed-pla-plus
- Bambu Lab P1P with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/petg-plus
- Bambu Lab P1P with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla
- Bambu Lab P1P with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla-basic
- Bambu Lab P1P with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla-chameleon
- Bambu Lab P1P with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla-glitter-rainbow
- Bambu Lab P1P with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla-matte
- Bambu Lab P1P with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla-mystic-silk
- Bambu Lab P1P with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla-silk-rainbow
- Bambu Lab P1P with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/pla-plus
- Bambu Lab P1P with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/silk-pla
- Bambu Lab P1P with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/inland/tpu
- Bambu Lab P1P with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/jayo/high-speed-matte-pla
- Bambu Lab P1P with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/jayo/matte-pla
- Bambu Lab P1P with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/jayo/petg
- Bambu Lab P1P with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/jayo/pla
- Bambu Lab P1P with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/jayo/pla-plus
- Bambu Lab P1P with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/jayo/silk-pla
- Bambu Lab P1P with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/jayo/tpu
- Bambu Lab P1P with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/abs
- Bambu Lab P1P with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/glow-pla
- Bambu Lab P1P with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/high-speed-petg
- Bambu Lab P1P with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/high-speed-pla
- Bambu Lab P1P with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/matte-pla
- Bambu Lab P1P with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/petg
- Bambu Lab P1P with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/petg-cf
- Bambu Lab P1P with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/pla
- Bambu Lab P1P with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/pla-basic
- Bambu Lab P1P with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/pla-cf
- Bambu Lab P1P with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/silk-pla
- Bambu Lab P1P with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/kingroon/tpu
- Bambu Lab P1P with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/abs
- Bambu Lab P1P with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/abs-basic
- Bambu Lab P1P with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/asa
- Bambu Lab P1P with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/asa-basic
- Bambu Lab P1P with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/easy-nylon
- Bambu Lab P1P with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/glow-abs
- Bambu Lab P1P with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/glow-pla
- Bambu Lab P1P with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/high-speed-petg
- Bambu Lab P1P with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/high-speed-pla
- Bambu Lab P1P with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/high-speed-tpu
- Bambu Lab P1P with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/luminous-high-speed-glow-tpu
- Bambu Lab P1P with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/matte-pla
- Bambu Lab P1P with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pc
- Bambu Lab P1P with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pc-professional
- Bambu Lab P1P with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/petg
- Bambu Lab P1P with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/petg-basic
- Bambu Lab P1P with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/petg-refill
- Bambu Lab P1P with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla
- Bambu Lab P1P with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-air
- Bambu Lab P1P with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-cf
- Bambu Lab P1P with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-cream
- Bambu Lab P1P with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-easy
- Bambu Lab P1P with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-easy-glow
- Bambu Lab P1P with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-plus
- Bambu Lab P1P with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-professional
- Bambu Lab P1P with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-refill
- Bambu Lab P1P with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-rock
- Bambu Lab P1P with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-super
- Bambu Lab P1P with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/pla-turbo-rapid
- Bambu Lab P1P with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/shimmer-pla
- Bambu Lab P1P with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/silk-pla
- Bambu Lab P1P with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/overture/tpu
- Bambu Lab P1P with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/abs
- Bambu Lab P1P with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/asa
- Bambu Lab P1P with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/cpe
- Bambu Lab P1P with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/creator-special-edition-pla
- Bambu Lab P1P with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/draft-pla
- Bambu Lab P1P with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/dual-panchroma-matte-pla
- Bambu Lab P1P with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/for-production-matte-pla
- Bambu Lab P1P with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/glow-pla
- Bambu Lab P1P with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/gradient-panchroma-pla
- Bambu Lab P1P with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/ht-pla-pro
- Bambu Lab P1P with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/ht-pla
- Bambu Lab P1P with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/ht-pla-gf
- Bambu Lab P1P with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/lw-polylite-pla
- Bambu Lab P1P with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/metallic-polylite-pla
- Bambu Lab P1P with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/metallic-polylite-silk-abs
- Bambu Lab P1P with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/metallic-polylite-silk-pla
- Bambu Lab P1P with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/muted-panchroma-matte-pla
- Bambu Lab P1P with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/neon-panchroma-pla
- Bambu Lab P1P with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pa12-cf
- Bambu Lab P1P with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pa6-cf
- Bambu Lab P1P with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pa6-gf
- Bambu Lab P1P with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/panchroma-cope
- Bambu Lab P1P with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/panchroma-glow-pla
- Bambu Lab P1P with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/panchroma-pla
- Bambu Lab P1P with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/panchroma-silk-pla
- Bambu Lab P1P with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pc
- Bambu Lab P1P with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pc-abs
- Bambu Lab P1P with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pc-pbt
- Bambu Lab P1P with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pet-cf
- Bambu Lab P1P with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/petg
- Bambu Lab P1P with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/petg-cf
- Bambu Lab P1P with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pla
- Bambu Lab P1P with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pla-cf
- Bambu Lab P1P with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pla-polycast
- Bambu Lab P1P with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polyflex-95-hf-high-speed-tpu
- Bambu Lab P1P with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polyflex-tpu
- Bambu Lab P1P with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polylite-abs
- Bambu Lab P1P with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polylite-asa
- Bambu Lab P1P with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polylite-pc
- Bambu Lab P1P with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polylite-petg
- Bambu Lab P1P with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polylite-pla
- Bambu Lab P1P with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polylite-pla-cf
- Bambu Lab P1P with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polymaker-pla-pro
- Bambu Lab P1P with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polymax-pc
- Bambu Lab P1P with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polymax-petg
- Bambu Lab P1P with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polymax-pla
- Bambu Lab P1P with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polymide-copa-pa6
- Bambu Lab P1P with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polysmooth
- Bambu Lab P1P with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polysonic-pla
- Bambu Lab P1P with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/polysupport-for-pla
- Bambu Lab P1P with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pps-cf
- Bambu Lab P1P with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pva
- Bambu Lab P1P with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pva-polydissolve-s1
- Bambu Lab P1P with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pva-polysupport-for-pa12
- Bambu Lab P1P with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/pvb
- Bambu Lab P1P with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/satin-panchroma-pla
- Bambu Lab P1P with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/silk-abs
- Bambu Lab P1P with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/silk-pla
- Bambu Lab P1P with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/polymaker/wood-pla
- Bambu Lab P1P with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/basic-pla
- Bambu Lab P1P with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/conductive-pla
- Bambu Lab P1P with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/fiber-ht-matte-pla
- Bambu Lab P1P with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/fluorescent-pla
- Bambu Lab P1P with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/glitter-petg
- Bambu Lab P1P with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/glitter-pla
- Bambu Lab P1P with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/glow-pla
- Bambu Lab P1P with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/high-speed-pla
- Bambu Lab P1P with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/iron-metal-composite-pla
- Bambu Lab P1P with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/marble-pla
- Bambu Lab P1P with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/matte-pla
- Bambu Lab P1P with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/metal-composite-pla
- Bambu Lab P1P with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/metallic-petg
- Bambu Lab P1P with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/metallic-pla
- Bambu Lab P1P with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/multicolor-pla
- Bambu Lab P1P with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/nebula-pla
- Bambu Lab P1P with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/opaque-pla
- Bambu Lab P1P with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/pearl-pla
- Bambu Lab P1P with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/petg
- Bambu Lab P1P with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/petg-cf
- Bambu Lab P1P with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/pla
- Bambu Lab P1P with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/pla-cf
- Bambu Lab P1P with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/pla-green-glow-in-the-dark
- Bambu Lab P1P with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/recycled-petg
- Bambu Lab P1P with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/recycled-pla
- Bambu Lab P1P with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/satin-pla
- Bambu Lab P1P with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/silk-petg
- Bambu Lab P1P with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/silk-pla
- Bambu Lab P1P with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/simply-petg
- Bambu Lab P1P with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/stainless-steel-metal-composite-pla
- Bambu Lab P1P with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/static-dissipative-carbon-fiber-pla
- Bambu Lab P1P with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/static-dissipative-petg
- Bambu Lab P1P with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/static-dissipative-pla
- Bambu Lab P1P with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/steel-metal-composite-pla
- Bambu Lab P1P with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/still-colorful-recycled-pla
- Bambu Lab P1P with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/thermochromic-pla
- Bambu Lab P1P with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/tpe
- Bambu Lab P1P with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/tpu
- Bambu Lab P1P with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/translucent-petg
- Bambu Lab P1P with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/protopasta/translucent-pla
- Bambu Lab P1P with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/asa
- Bambu Lab P1P with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/blend-silk-pla
- Bambu Lab P1P with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/matte-petg
- Bambu Lab P1P with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/mystic-premium-pla
- Bambu Lab P1P with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 115 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pa11-cf
- Bambu Lab P1P with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pc
- Bambu Lab P1P with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pc-blend
- Bambu Lab P1P with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pc-cf
- Bambu Lab P1P with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pei
- Bambu Lab P1P with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pei-1010
- Bambu Lab P1P with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/petg
- Bambu Lab P1P with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/petg-cf
- Bambu Lab P1P with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/petg-magnetite
- Bambu Lab P1P with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/petg-tungsten
- Bambu Lab P1P with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/petg-v0
- Bambu Lab P1P with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pla
- Bambu Lab P1P with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pla-recycled
- Bambu Lab P1P with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pla-woodfill
- Bambu Lab P1P with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pp-cf
- Bambu Lab P1P with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pp-gf
- Bambu Lab P1P with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/pvb
- Bambu Lab P1P with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/rpla
- Bambu Lab P1P with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/prusament/tpu-95a
- Bambu Lab P1P with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-abs-ht-hf
- Bambu Lab P1P with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-abs-cf-core
- Bambu Lab P1P with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-abs-gf
- Bambu Lab P1P with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-asa-gf
- Bambu Lab P1P with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-pet-cf
- Bambu Lab P1P with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-pet-gf
- Bambu Lab P1P with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-petg-cf-pro
- Bambu Lab P1P with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-ppa
- Bambu Lab P1P with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-ppa-cf
- Bambu Lab P1P with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-ppa-cf-core
- Bambu Lab P1P with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/fibreheart-tpu-gf
- Bambu Lab P1P with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/flex-tpu-64d
- Bambu Lab P1P with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/flex-tpu-85a
- Bambu Lab P1P with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/flex-tpu-air-85a
- Bambu Lab P1P with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/rebound-peba-85a
- Bambu Lab P1P with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/rebound-peba-95a
- Bambu Lab P1P with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/rebound-peba-air-95a
- Bambu Lab P1P with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/roamr-tpu-air-hr-80a
- Bambu Lab P1P with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/siraya-tech/roamr-tpu-air-hr-85a
- Bambu Lab P1P with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/95a-high-speed-tpu
- Bambu Lab P1P with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/abs
- Bambu Lab P1P with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/abs-fr
- Bambu Lab P1P with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/apla
- Bambu Lab P1P with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/asa
- Bambu Lab P1P with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/fluorescent-pla
- Bambu Lab P1P with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/glow-petg
- Bambu Lab P1P with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/glow-pla
- Bambu Lab P1P with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/high-speed-abs
- Bambu Lab P1P with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/high-speed-matte-petg
- Bambu Lab P1P with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/high-speed-matte-pla
- Bambu Lab P1P with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/high-speed-petg
- Bambu Lab P1P with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/high-speed-pla
- Bambu Lab P1P with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/high-speed-pla-marble
- Bambu Lab P1P with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/high-speed-pla-plus
- Bambu Lab P1P with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/luminous-glow-in-the-dark-petg
- Bambu Lab P1P with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/matte-petg-cf
- Bambu Lab P1P with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pa12-cf
- Bambu Lab P1P with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pa6-easy-pa
- Bambu Lab P1P with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pa6-cf
- Bambu Lab P1P with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pa6-gf
- Bambu Lab P1P with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pc
- Bambu Lab P1P with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pc-abs
- Bambu Lab P1P with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pcl
- Bambu Lab P1P with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/peek
- Bambu Lab P1P with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/petg
- Bambu Lab P1P with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/petg-2-0
- Bambu Lab P1P with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/petg-carbon-fiber
- Bambu Lab P1P with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/petg-glow-in-the-dark-filament
- Bambu Lab P1P with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla
- Bambu Lab P1P with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-carbon-fiber
- Bambu Lab P1P with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-cf
- Bambu Lab P1P with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-classic
- Bambu Lab P1P with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-galaxy
- Bambu Lab P1P with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-glow-in-the-dark
- Bambu Lab P1P with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-matte
- Bambu Lab P1P with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-matte-dual-color
- Bambu Lab P1P with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-rainbow
- Bambu Lab P1P with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-silk
- Bambu Lab P1P with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-transparent-rainbow
- Bambu Lab P1P with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-twinkling
- Bambu Lab P1P with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-wood
- Bambu Lab P1P with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-meta
- Bambu Lab P1P with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-plus
- Bambu Lab P1P with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pla-plus-2-0
- Bambu Lab P1P with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pp
- Bambu Lab P1P with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pva
- Bambu Lab P1P with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/pvb
- Bambu Lab P1P with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/real-wood-fiber-pla
- Bambu Lab P1P with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/silk-2-0
- Bambu Lab P1P with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/silk-pla-plus
- Bambu Lab P1P with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/silk-pla-plus-dual-color
- Bambu Lab P1P with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/silk-pla-plus-four-color
- Bambu Lab P1P with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/silk-pla-plus-rainbow
- Bambu Lab P1P with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/silk-pla-plus-tri-color
- Bambu Lab P1P with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/temperature-color-change-pla
- Bambu Lab P1P with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/tpu
- Bambu Lab P1P with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/tpu-silk
- Bambu Lab P1P with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/tpu90a
- Bambu Lab P1P with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/tpu95a
- Bambu Lab P1P with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/transparent-clear-pla
- Bambu Lab P1P with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1p/sunlu/upgrade-pla
- Bambu Lab P1S with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/90a-flexible-peba
- Bambu Lab P1S with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/basic-matte-pla
- Bambu Lab P1S with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/basic-silk-pla
- Bambu Lab P1S with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/conductive-pla
- Bambu Lab P1S with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/crystal-transparent-pla
- Bambu Lab P1S with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/dual-color-matte-pla
- Bambu Lab P1S with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/dual-color-silk-pla
- Bambu Lab P1S with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Bambu Lab P1S with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/glow-pla
- Bambu Lab P1S with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/glow-tpu
- Bambu Lab P1S with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/high-speed-pla
- Bambu Lab P1S with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/marble-pla
- Bambu Lab P1S with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/matte-pla
- Bambu Lab P1S with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/peba
- Bambu Lab P1S with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/petg
- Bambu Lab P1S with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/pla
- Bambu Lab P1S with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/pla-cf
- Bambu Lab P1S with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/pla-metal
- Bambu Lab P1S with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/quad-color-silk-pla
- Bambu Lab P1S with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/rainbow-silk-pla
- Bambu Lab P1S with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/s-series-silk-pla
- Bambu Lab P1S with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/shiny-glitter-silk-pla
- Bambu Lab P1S with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/shiny-gradient-silk-pla
- Bambu Lab P1S with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/silk-gf-pla
- Bambu Lab P1S with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/silk-pla
- Bambu Lab P1S with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/temperature-color-change-pla
- Bambu Lab P1S with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/tpu
- Bambu Lab P1S with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/transparent-pla
- Bambu Lab P1S with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/triple-color-matte-pla
- Bambu Lab P1S with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/triple-color-silk-pla
- Bambu Lab P1S with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/uv-color-change-pla
- Bambu Lab P1S with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/amolen/wood-pla
- Bambu Lab P1S with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/abs
- Bambu Lab P1S with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/asa
- Bambu Lab P1S with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/high-speed-pla
- Bambu Lab P1S with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/petg
- Bambu Lab P1S with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-basic
- Bambu Lab P1S with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-galaxy
- Bambu Lab P1S with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-marble
- Bambu Lab P1S with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-matte
- Bambu Lab P1S with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-metal
- Bambu Lab P1S with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-plus
- Bambu Lab P1S with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-silk
- Bambu Lab P1S with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-silk-dual-tricolor
- Bambu Lab P1S with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/pla-special
- Bambu Lab P1S with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/tpu
- Bambu Lab P1S with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/anycubic/translucent-petg
- Bambu Lab P1S with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/abs
- Bambu Lab P1S with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/abs-gf
- Bambu Lab P1S with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/asa
- Bambu Lab P1S with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/asa-aero
- Bambu Lab P1S with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/asa-cf
- Bambu Lab P1S with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/matte-asa-cf
- Bambu Lab P1S with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pa12-cf
- Bambu Lab P1S with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pa6-cf
- Bambu Lab P1S with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pa6-gf
- Bambu Lab P1S with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/paht-cf
- Bambu Lab P1S with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pc
- Bambu Lab P1S with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pc-fr
- Bambu Lab P1S with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pet-cf
- Bambu Lab P1S with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/petg-basic
- Bambu Lab P1S with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/petg-hf
- Bambu Lab P1S with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/petg-matte
- Bambu Lab P1S with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/petg-translucent
- Bambu Lab P1S with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/petg-cf
- Bambu Lab P1S with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla
- Bambu Lab P1S with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-aero
- Bambu Lab P1S with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-basic
- Bambu Lab P1S with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-basic-gradient
- Bambu Lab P1S with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-galaxy
- Bambu Lab P1S with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-glow
- Bambu Lab P1S with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-lite
- Bambu Lab P1S with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-marble
- Bambu Lab P1S with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-matte
- Bambu Lab P1S with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-metal
- Bambu Lab P1S with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-pure
- Bambu Lab P1S with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-silk-dual-color
- Bambu Lab P1S with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-silk-multi-color
- Bambu Lab P1S with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-silk-plus
- Bambu Lab P1S with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-sparkle
- Bambu Lab P1S with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-tough-plus
- Bambu Lab P1S with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-translucent
- Bambu Lab P1S with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-wood
- Bambu Lab P1S with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pla-cf
- Bambu Lab P1S with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/ppa-cf
- Bambu Lab P1S with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pps-cf
- Bambu Lab P1S with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/pva
- Bambu Lab P1S with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/silk-pla
- Bambu Lab P1S with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/support-for-abs
- Bambu Lab P1S with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/support-for-pa-pet
- Bambu Lab P1S with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/support-for-pla
- Bambu Lab P1S with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/support-for-pla-petg
- Bambu Lab P1S with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/tpu
- Bambu Lab P1S with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/tpu-85a
- Bambu Lab P1S with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/tpu-90a
- Bambu Lab P1S with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/tpu-95a-hf
- Bambu Lab P1S with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/bambu-lab/tpu-for-ams
- Bambu Lab P1S with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/asa
- Bambu Lab P1S with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/cpe
- Bambu Lab P1S with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/economy-pla
- Bambu Lab P1S with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/glow-pha
- Bambu Lab P1S with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/high-speed-pla
- Bambu Lab P1S with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/lw-ht-pla
- Bambu Lab P1S with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/matte-pla
- Bambu Lab P1S with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/petg
- Bambu Lab P1S with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/pha
- Bambu Lab P1S with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/pha-pla
- Bambu Lab P1S with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/pla
- Bambu Lab P1S with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/r-semi-pla
- Bambu Lab P1S with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/semi-pla
- Bambu Lab P1S with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/silk-pla
- Bambu Lab P1S with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/stonefill-pla
- Bambu Lab P1S with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/colorfabb/tpu
- Bambu Lab P1S with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/95a-tpu
- Bambu Lab P1S with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/abs
- Bambu Lab P1S with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/cr-petg
- Bambu Lab P1S with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/cr-pla-carbon
- Bambu Lab P1S with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/ender-fast-pla
- Bambu Lab P1S with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/ender-pla-plus
- Bambu Lab P1S with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hp-asa
- Bambu Lab P1S with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hp-tpu
- Bambu Lab P1S with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-abs
- Bambu Lab P1S with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-luminous-pla
- Bambu Lab P1S with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-pa6-cf
- Bambu Lab P1S with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-pc
- Bambu Lab P1S with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-petg
- Bambu Lab P1S with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-pla
- Bambu Lab P1S with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-pla-cf
- Bambu Lab P1S with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/hyper-rainbow-pla
- Bambu Lab P1S with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/petg
- Bambu Lab P1S with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/pla
- Bambu Lab P1S with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/creality/pla-cf
- Bambu Lab P1S with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/pla-cr-wood
- Bambu Lab P1S with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/creality/ppa-cf
- Bambu Lab P1S with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/silk-pla
- Bambu Lab P1S with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/soleyin-basic-petg
- Bambu Lab P1S with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/creality/soleyin-ultra-pla
- Bambu Lab P1S with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/abs
- Bambu Lab P1S with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/asa
- Bambu Lab P1S with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/galaxy-pla
- Bambu Lab P1S with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/paht-cf
- Bambu Lab P1S with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pc
- Bambu Lab P1S with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pc-fr
- Bambu Lab P1S with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pet-cf
- Bambu Lab P1S with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/petg
- Bambu Lab P1S with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/petg-pro
- Bambu Lab P1S with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/petg-translucent
- Bambu Lab P1S with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/petg-cf
- Bambu Lab P1S with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/petg-gf
- Bambu Lab P1S with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla
- Bambu Lab P1S with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-basic
- Bambu Lab P1S with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-glow
- Bambu Lab P1S with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-marble
- Bambu Lab P1S with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-matte
- Bambu Lab P1S with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-metallic
- Bambu Lab P1S with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-plus
- Bambu Lab P1S with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-pro
- Bambu Lab P1S with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-sparkle
- Bambu Lab P1S with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-wood
- Bambu Lab P1S with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/pla-cf
- Bambu Lab P1S with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/rapid-petg
- Bambu Lab P1S with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/rapid-pla-plus
- Bambu Lab P1S with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/rapid-tpu-95a
- Bambu Lab P1S with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/silk-pla
- Bambu Lab P1S with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/elegoo/tpu-95a
- Bambu Lab P1S with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/abs
- Bambu Lab P1S with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/abs-high-speed
- Bambu Lab P1S with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/abs-cf
- Bambu Lab P1S with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/abs-gf
- Bambu Lab P1S with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/abs-pc
- Bambu Lab P1S with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/abs-plus
- Bambu Lab P1S with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/asa
- Bambu Lab P1S with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/asa-high-speed
- Bambu Lab P1S with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/asa-light-weight
- Bambu Lab P1S with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/asa-cf
- Bambu Lab P1S with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/asa-gf
- Bambu Lab P1S with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pa12-nylon
- Bambu Lab P1S with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pa12-cf
- Bambu Lab P1S with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pa12-gf
- Bambu Lab P1S with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pa6-cf
- Bambu Lab P1S with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pa6-gf
- Bambu Lab P1S with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/petg
- Bambu Lab P1S with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/petg-cf
- Bambu Lab P1S with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla
- Bambu Lab P1S with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-burnt-titanium
- Bambu Lab P1S with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-burnt-titanium-dual-color
- Bambu Lab P1S with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-burnt-titanium-rainbow
- Bambu Lab P1S with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-burnt-titanium-triple-color
- Bambu Lab P1S with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-galaxy
- Bambu Lab P1S with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-high-speed
- Bambu Lab P1S with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-light-weight
- Bambu Lab P1S with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-luminous
- Bambu Lab P1S with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-marble
- Bambu Lab P1S with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte
- Bambu Lab P1S with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte-dual-color
- Bambu Lab P1S with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte-gradient
- Bambu Lab P1S with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte-high-speed
- Bambu Lab P1S with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte-high-speed-gradient-multi-color
- Bambu Lab P1S with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte-high-speed-rock-rainbow
- Bambu Lab P1S with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte-high-speed-triple-color
- Bambu Lab P1S with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-matte-rainbow
- Bambu Lab P1S with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-metallic
- Bambu Lab P1S with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-rainbow
- Bambu Lab P1S with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-silk
- Bambu Lab P1S with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-silk-high-speed-dual-color
- Bambu Lab P1S with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-silk-high-speed-quadruple
- Bambu Lab P1S with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-silk-high-speed-triple-color
- Bambu Lab P1S with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-silk-rainbow
- Bambu Lab P1S with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-ultra-silk
- Bambu Lab P1S with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-wood
- Bambu Lab P1S with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-cf
- Bambu Lab P1S with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-plus
- Bambu Lab P1S with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pla-plus-high-speed
- Bambu Lab P1S with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pp
- Bambu Lab P1S with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/pp-cf
- Bambu Lab P1S with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/tpu
- Bambu Lab P1S with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/tpu-90a
- Bambu Lab P1S with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/tpu-high-speed
- Bambu Lab P1S with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/eryone/tpu-rainbow
- Bambu Lab P1S with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/abs-plus
- Bambu Lab P1S with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/abs-pluscf
- Bambu Lab P1S with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/abs-plushs
- Bambu Lab P1S with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/asa-plus
- Bambu Lab P1S with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/dark-twinkling-pla-magic
- Bambu Lab P1S with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/epaht-cf
- Bambu Lab P1S with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/epla-plushs
- Bambu Lab P1S with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/esun-petg-matte
- Bambu Lab P1S with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/mystic-silk-pla
- Bambu Lab P1S with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pa12-cf
- Bambu Lab P1S with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pa6-pa
- Bambu Lab P1S with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pa6-pa-cf
- Bambu Lab P1S with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/peak-pla
- Bambu Lab P1S with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pet
- Bambu Lab P1S with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/petg
- Bambu Lab P1S with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/petg-basic
- Bambu Lab P1S with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/petg-matte
- Bambu Lab P1S with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/petg-pluscf
- Bambu Lab P1S with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/petg-plushs
- Bambu Lab P1S with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-basic
- Bambu Lab P1S with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-cf
- Bambu Lab P1S with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-chameleon
- Bambu Lab P1S with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-hs
- Bambu Lab P1S with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-lite
- Bambu Lab P1S with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-luminous
- Bambu Lab P1S with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-luminous-rainbow
- Bambu Lab P1S with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-lw
- Bambu Lab P1S with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-marble
- Bambu Lab P1S with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-matte
- Bambu Lab P1S with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-metal
- Bambu Lab P1S with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-silk
- Bambu Lab P1S with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-silk-candy
- Bambu Lab P1S with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-silk-magic
- Bambu Lab P1S with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-silk-metal
- Bambu Lab P1S with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-silk-rainbow
- Bambu Lab P1S with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-st
- Bambu Lab P1S with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-stars
- Bambu Lab P1S with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-wood
- Bambu Lab P1S with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-plus
- Bambu Lab P1S with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pla-plus-cmyk
- Bambu Lab P1S with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/pva
- Bambu Lab P1S with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/silk-petg
- Bambu Lab P1S with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/tpe-83a
- Bambu Lab P1S with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/tpu-95a
- Bambu Lab P1S with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/tpu-lw
- Bambu Lab P1S with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/esun-3d/uv-change-pla-uv-color-change
- Bambu Lab P1S with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/basic-pla
- Bambu Lab P1S with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/biofusion-pla
- Bambu Lab P1S with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/biofusion-silk-pla
- Bambu Lab P1S with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/durapro-abs
- Bambu Lab P1S with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/durapro-asa
- Bambu Lab P1S with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/durapro-cf-pa12
- Bambu Lab P1S with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/durapro-matte-asa
- Bambu Lab P1S with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/durapro-pa12
- Bambu Lab P1S with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/durapro-pbt-pc
- Bambu Lab P1S with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/flax-pla
- Bambu Lab P1S with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/flex-hard-cf-tpu
- Bambu Lab P1S with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/flex-hard-tpu
- Bambu Lab P1S with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/flex-medium-tpu
- Bambu Lab P1S with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/flex-semisoft-tpu
- Bambu Lab P1S with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/glow-petg
- Bambu Lab P1S with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/greentec-matte-pla
- Bambu Lab P1S with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/greentec-pla
- Bambu Lab P1S with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/pctg
- Bambu Lab P1S with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/pearl-pla
- Bambu Lab P1S with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/petg
- Bambu Lab P1S with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/pla-nx2-matt
- Bambu Lab P1S with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/extrudr/wood-pla
- Bambu Lab P1S with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/fillamentum/asa-extrafill
- Bambu Lab P1S with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/fillamentum/cpe-hg100
- Bambu Lab P1S with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/fillamentum/pla-crystal-clear
- Bambu Lab P1S with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/fillamentum/pla-extrafill
- Bambu Lab P1S with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/abs
- Bambu Lab P1S with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/glow-abs
- Bambu Lab P1S with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/glow-pla
- Bambu Lab P1S with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/metallic-finish-pla
- Bambu Lab P1S with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/petg
- Bambu Lab P1S with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/pla
- Bambu Lab P1S with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/pla-basic
- Bambu Lab P1S with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/pla-cf
- Bambu Lab P1S with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/pla-matte
- Bambu Lab P1S with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/pla-max
- Bambu Lab P1S with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/pla-metal
- Bambu Lab P1S with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/pla-pro
- Bambu Lab P1S with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/silk-pla
- Bambu Lab P1S with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/tpu
- Bambu Lab P1S with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/transparent-pla
- Bambu Lab P1S with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/uv-color-changing-pla
- Bambu Lab P1S with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/hatchbox/wood-pla
- Bambu Lab P1S with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/abs
- Bambu Lab P1S with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/carbon-fiber-nylon
- Bambu Lab P1S with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/galaxy-pla
- Bambu Lab P1S with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/glow-abs
- Bambu Lab P1S with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/high-speed-pla-plus
- Bambu Lab P1S with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/petg-plus
- Bambu Lab P1S with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla
- Bambu Lab P1S with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla-basic
- Bambu Lab P1S with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla-chameleon
- Bambu Lab P1S with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla-glitter-rainbow
- Bambu Lab P1S with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla-matte
- Bambu Lab P1S with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla-mystic-silk
- Bambu Lab P1S with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla-silk-rainbow
- Bambu Lab P1S with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/pla-plus
- Bambu Lab P1S with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/silk-pla
- Bambu Lab P1S with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/inland/tpu
- Bambu Lab P1S with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/jayo/high-speed-matte-pla
- Bambu Lab P1S with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/jayo/matte-pla
- Bambu Lab P1S with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/jayo/petg
- Bambu Lab P1S with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/jayo/pla
- Bambu Lab P1S with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/jayo/pla-plus
- Bambu Lab P1S with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/jayo/silk-pla
- Bambu Lab P1S with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/jayo/tpu
- Bambu Lab P1S with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/abs
- Bambu Lab P1S with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/glow-pla
- Bambu Lab P1S with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/high-speed-petg
- Bambu Lab P1S with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/high-speed-pla
- Bambu Lab P1S with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/matte-pla
- Bambu Lab P1S with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/petg
- Bambu Lab P1S with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/petg-cf
- Bambu Lab P1S with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/pla
- Bambu Lab P1S with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/pla-basic
- Bambu Lab P1S with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/pla-cf
- Bambu Lab P1S with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/silk-pla
- Bambu Lab P1S with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/kingroon/tpu
- Bambu Lab P1S with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/abs
- Bambu Lab P1S with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/abs-basic
- Bambu Lab P1S with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/asa
- Bambu Lab P1S with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/asa-basic
- Bambu Lab P1S with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/easy-nylon
- Bambu Lab P1S with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/glow-abs
- Bambu Lab P1S with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/glow-pla
- Bambu Lab P1S with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/high-speed-petg
- Bambu Lab P1S with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/high-speed-pla
- Bambu Lab P1S with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/high-speed-tpu
- Bambu Lab P1S with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/luminous-high-speed-glow-tpu
- Bambu Lab P1S with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/matte-pla
- Bambu Lab P1S with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pc
- Bambu Lab P1S with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pc-professional
- Bambu Lab P1S with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/petg
- Bambu Lab P1S with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/petg-basic
- Bambu Lab P1S with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/petg-refill
- Bambu Lab P1S with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla
- Bambu Lab P1S with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-air
- Bambu Lab P1S with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-cf
- Bambu Lab P1S with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-cream
- Bambu Lab P1S with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-easy
- Bambu Lab P1S with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-easy-glow
- Bambu Lab P1S with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-plus
- Bambu Lab P1S with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-professional
- Bambu Lab P1S with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-refill
- Bambu Lab P1S with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-rock
- Bambu Lab P1S with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-super
- Bambu Lab P1S with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/pla-turbo-rapid
- Bambu Lab P1S with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/shimmer-pla
- Bambu Lab P1S with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/silk-pla
- Bambu Lab P1S with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/overture/tpu
- Bambu Lab P1S with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/abs
- Bambu Lab P1S with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/asa
- Bambu Lab P1S with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/cpe
- Bambu Lab P1S with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/creator-special-edition-pla
- Bambu Lab P1S with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/draft-pla
- Bambu Lab P1S with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/dual-panchroma-matte-pla
- Bambu Lab P1S with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/for-production-matte-pla
- Bambu Lab P1S with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/glow-pla
- Bambu Lab P1S with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/gradient-panchroma-pla
- Bambu Lab P1S with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/ht-pla-pro
- Bambu Lab P1S with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/ht-pla
- Bambu Lab P1S with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/ht-pla-gf
- Bambu Lab P1S with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/lw-polylite-pla
- Bambu Lab P1S with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/metallic-polylite-pla
- Bambu Lab P1S with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/metallic-polylite-silk-abs
- Bambu Lab P1S with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/metallic-polylite-silk-pla
- Bambu Lab P1S with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/muted-panchroma-matte-pla
- Bambu Lab P1S with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/neon-panchroma-pla
- Bambu Lab P1S with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pa12-cf
- Bambu Lab P1S with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pa6-cf
- Bambu Lab P1S with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pa6-gf
- Bambu Lab P1S with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/panchroma-cope
- Bambu Lab P1S with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/panchroma-glow-pla
- Bambu Lab P1S with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/panchroma-pla
- Bambu Lab P1S with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/panchroma-silk-pla
- Bambu Lab P1S with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pc
- Bambu Lab P1S with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pc-abs
- Bambu Lab P1S with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pc-pbt
- Bambu Lab P1S with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pet-cf
- Bambu Lab P1S with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/petg
- Bambu Lab P1S with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/petg-cf
- Bambu Lab P1S with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pla
- Bambu Lab P1S with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pla-cf
- Bambu Lab P1S with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pla-polycast
- Bambu Lab P1S with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polyflex-95-hf-high-speed-tpu
- Bambu Lab P1S with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polyflex-tpu
- Bambu Lab P1S with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polylite-abs
- Bambu Lab P1S with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polylite-asa
- Bambu Lab P1S with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polylite-pc
- Bambu Lab P1S with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polylite-petg
- Bambu Lab P1S with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polylite-pla
- Bambu Lab P1S with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polylite-pla-cf
- Bambu Lab P1S with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polymaker-pla-pro
- Bambu Lab P1S with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polymax-pc
- Bambu Lab P1S with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polymax-petg
- Bambu Lab P1S with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polymax-pla
- Bambu Lab P1S with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polymide-copa-pa6
- Bambu Lab P1S with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polysmooth
- Bambu Lab P1S with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polysonic-pla
- Bambu Lab P1S with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/polysupport-for-pla
- Bambu Lab P1S with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pps-cf
- Bambu Lab P1S with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pva
- Bambu Lab P1S with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pva-polydissolve-s1
- Bambu Lab P1S with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pva-polysupport-for-pa12
- Bambu Lab P1S with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/pvb
- Bambu Lab P1S with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/satin-panchroma-pla
- Bambu Lab P1S with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/silk-abs
- Bambu Lab P1S with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/silk-pla
- Bambu Lab P1S with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/polymaker/wood-pla
- Bambu Lab P1S with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/basic-pla
- Bambu Lab P1S with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/conductive-pla
- Bambu Lab P1S with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/fiber-ht-matte-pla
- Bambu Lab P1S with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/fluorescent-pla
- Bambu Lab P1S with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/glitter-petg
- Bambu Lab P1S with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/glitter-pla
- Bambu Lab P1S with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/glow-pla
- Bambu Lab P1S with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/high-speed-pla
- Bambu Lab P1S with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/iron-metal-composite-pla
- Bambu Lab P1S with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/marble-pla
- Bambu Lab P1S with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/matte-pla
- Bambu Lab P1S with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/metal-composite-pla
- Bambu Lab P1S with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/metallic-petg
- Bambu Lab P1S with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/metallic-pla
- Bambu Lab P1S with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/multicolor-pla
- Bambu Lab P1S with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/nebula-pla
- Bambu Lab P1S with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/opaque-pla
- Bambu Lab P1S with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/pearl-pla
- Bambu Lab P1S with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/petg
- Bambu Lab P1S with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/petg-cf
- Bambu Lab P1S with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/pla
- Bambu Lab P1S with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/pla-cf
- Bambu Lab P1S with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/pla-green-glow-in-the-dark
- Bambu Lab P1S with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/recycled-petg
- Bambu Lab P1S with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/recycled-pla
- Bambu Lab P1S with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/satin-pla
- Bambu Lab P1S with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/silk-petg
- Bambu Lab P1S with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/silk-pla
- Bambu Lab P1S with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/simply-petg
- Bambu Lab P1S with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/stainless-steel-metal-composite-pla
- Bambu Lab P1S with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/static-dissipative-carbon-fiber-pla
- Bambu Lab P1S with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/static-dissipative-petg
- Bambu Lab P1S with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/static-dissipative-pla
- Bambu Lab P1S with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/steel-metal-composite-pla
- Bambu Lab P1S with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/still-colorful-recycled-pla
- Bambu Lab P1S with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/thermochromic-pla
- Bambu Lab P1S with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/tpe
- Bambu Lab P1S with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/tpu
- Bambu Lab P1S with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/translucent-petg
- Bambu Lab P1S with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/protopasta/translucent-pla
- Bambu Lab P1S with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/asa
- Bambu Lab P1S with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/blend-silk-pla
- Bambu Lab P1S with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/matte-petg
- Bambu Lab P1S with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/mystic-premium-pla
- Bambu Lab P1S with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 115 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pa11-cf
- Bambu Lab P1S with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pc
- Bambu Lab P1S with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pc-blend
- Bambu Lab P1S with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pc-cf
- Bambu Lab P1S with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pei
- Bambu Lab P1S with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pei-1010
- Bambu Lab P1S with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/petg
- Bambu Lab P1S with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/petg-cf
- Bambu Lab P1S with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/petg-magnetite
- Bambu Lab P1S with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/petg-tungsten
- Bambu Lab P1S with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/petg-v0
- Bambu Lab P1S with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pla
- Bambu Lab P1S with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pla-recycled
- Bambu Lab P1S with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pla-woodfill
- Bambu Lab P1S with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pp-cf
- Bambu Lab P1S with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pp-gf
- Bambu Lab P1S with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/pvb
- Bambu Lab P1S with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/rpla
- Bambu Lab P1S with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/prusament/tpu-95a
- Bambu Lab P1S with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-abs-ht-hf
- Bambu Lab P1S with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-abs-cf-core
- Bambu Lab P1S with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-abs-gf
- Bambu Lab P1S with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-asa-gf
- Bambu Lab P1S with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-pet-cf
- Bambu Lab P1S with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-pet-gf
- Bambu Lab P1S with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-petg-cf-pro
- Bambu Lab P1S with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-ppa
- Bambu Lab P1S with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-ppa-cf
- Bambu Lab P1S with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-ppa-cf-core
- Bambu Lab P1S with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/fibreheart-tpu-gf
- Bambu Lab P1S with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/flex-tpu-64d
- Bambu Lab P1S with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/flex-tpu-85a
- Bambu Lab P1S with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/flex-tpu-air-85a
- Bambu Lab P1S with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/rebound-peba-85a
- Bambu Lab P1S with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/rebound-peba-95a
- Bambu Lab P1S with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/rebound-peba-air-95a
- Bambu Lab P1S with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/roamr-tpu-air-hr-80a
- Bambu Lab P1S with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/siraya-tech/roamr-tpu-air-hr-85a
- Bambu Lab P1S with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/95a-high-speed-tpu
- Bambu Lab P1S with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/abs
- Bambu Lab P1S with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/abs-fr
- Bambu Lab P1S with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/apla
- Bambu Lab P1S with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/asa
- Bambu Lab P1S with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/fluorescent-pla
- Bambu Lab P1S with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/glow-petg
- Bambu Lab P1S with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/glow-pla
- Bambu Lab P1S with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/high-speed-abs
- Bambu Lab P1S with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/high-speed-matte-petg
- Bambu Lab P1S with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/high-speed-matte-pla
- Bambu Lab P1S with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/high-speed-petg
- Bambu Lab P1S with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/high-speed-pla
- Bambu Lab P1S with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/high-speed-pla-marble
- Bambu Lab P1S with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/high-speed-pla-plus
- Bambu Lab P1S with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/luminous-glow-in-the-dark-petg
- Bambu Lab P1S with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/matte-petg-cf
- Bambu Lab P1S with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pa12-cf
- Bambu Lab P1S with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pa6-easy-pa
- Bambu Lab P1S with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pa6-cf
- Bambu Lab P1S with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pa6-gf
- Bambu Lab P1S with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pc
- Bambu Lab P1S with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pc-abs
- Bambu Lab P1S with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pcl
- Bambu Lab P1S with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/peek
- Bambu Lab P1S with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/petg
- Bambu Lab P1S with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/petg-2-0
- Bambu Lab P1S with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/petg-carbon-fiber
- Bambu Lab P1S with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/petg-glow-in-the-dark-filament
- Bambu Lab P1S with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla
- Bambu Lab P1S with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-carbon-fiber
- Bambu Lab P1S with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-cf
- Bambu Lab P1S with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-classic
- Bambu Lab P1S with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-galaxy
- Bambu Lab P1S with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-glow-in-the-dark
- Bambu Lab P1S with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-matte
- Bambu Lab P1S with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-matte-dual-color
- Bambu Lab P1S with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-rainbow
- Bambu Lab P1S with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-silk
- Bambu Lab P1S with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-transparent-rainbow
- Bambu Lab P1S with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-twinkling
- Bambu Lab P1S with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-wood
- Bambu Lab P1S with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-meta
- Bambu Lab P1S with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-plus
- Bambu Lab P1S with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pla-plus-2-0
- Bambu Lab P1S with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pp
- Bambu Lab P1S with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pva
- Bambu Lab P1S with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/pvb
- Bambu Lab P1S with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/real-wood-fiber-pla
- Bambu Lab P1S with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/silk-2-0
- Bambu Lab P1S with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/silk-pla-plus
- Bambu Lab P1S with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/silk-pla-plus-dual-color
- Bambu Lab P1S with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/silk-pla-plus-four-color
- Bambu Lab P1S with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/silk-pla-plus-rainbow
- Bambu Lab P1S with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/silk-pla-plus-tri-color
- Bambu Lab P1S with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/temperature-color-change-pla
- Bambu Lab P1S with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/tpu
- Bambu Lab P1S with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/tpu-silk
- Bambu Lab P1S with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/tpu90a
- Bambu Lab P1S with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/tpu95a
- Bambu Lab P1S with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/transparent-clear-pla
- Bambu Lab P1S with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-p1s/sunlu/upgrade-pla
- Bambu Lab X1 Carbon with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/90a-flexible-peba
- Bambu Lab X1 Carbon with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/basic-matte-pla
- Bambu Lab X1 Carbon with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/basic-silk-pla
- Bambu Lab X1 Carbon with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/conductive-pla
- Bambu Lab X1 Carbon with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/crystal-transparent-pla
- Bambu Lab X1 Carbon with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/dual-color-matte-pla
- Bambu Lab X1 Carbon with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/dual-color-silk-pla
- Bambu Lab X1 Carbon with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Bambu Lab X1 Carbon with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/glow-pla
- Bambu Lab X1 Carbon with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/glow-tpu
- Bambu Lab X1 Carbon with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/high-speed-pla
- Bambu Lab X1 Carbon with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/marble-pla
- Bambu Lab X1 Carbon with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/matte-pla
- Bambu Lab X1 Carbon with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/peba
- Bambu Lab X1 Carbon with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/petg
- Bambu Lab X1 Carbon with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/pla
- Bambu Lab X1 Carbon with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/pla-cf
- Bambu Lab X1 Carbon with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/pla-metal
- Bambu Lab X1 Carbon with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/quad-color-silk-pla
- Bambu Lab X1 Carbon with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/rainbow-silk-pla
- Bambu Lab X1 Carbon with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/s-series-silk-pla
- Bambu Lab X1 Carbon with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/shiny-glitter-silk-pla
- Bambu Lab X1 Carbon with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/shiny-gradient-silk-pla
- Bambu Lab X1 Carbon with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/silk-gf-pla
- Bambu Lab X1 Carbon with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/silk-pla
- Bambu Lab X1 Carbon with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/temperature-color-change-pla
- Bambu Lab X1 Carbon with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/tpu
- Bambu Lab X1 Carbon with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/transparent-pla
- Bambu Lab X1 Carbon with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/triple-color-matte-pla
- Bambu Lab X1 Carbon with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/triple-color-silk-pla
- Bambu Lab X1 Carbon with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/uv-color-change-pla
- Bambu Lab X1 Carbon with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/amolen/wood-pla
- Bambu Lab X1 Carbon with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/abs
- Bambu Lab X1 Carbon with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/asa
- Bambu Lab X1 Carbon with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/high-speed-pla
- Bambu Lab X1 Carbon with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/petg
- Bambu Lab X1 Carbon with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-basic
- Bambu Lab X1 Carbon with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-galaxy
- Bambu Lab X1 Carbon with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-marble
- Bambu Lab X1 Carbon with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-matte
- Bambu Lab X1 Carbon with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-metal
- Bambu Lab X1 Carbon with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-plus
- Bambu Lab X1 Carbon with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-silk
- Bambu Lab X1 Carbon with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-silk-dual-tricolor
- Bambu Lab X1 Carbon with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/pla-special
- Bambu Lab X1 Carbon with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/tpu
- Bambu Lab X1 Carbon with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/anycubic/translucent-petg
- Bambu Lab X1 Carbon with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/abs
- Bambu Lab X1 Carbon with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/abs-gf
- Bambu Lab X1 Carbon with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/asa
- Bambu Lab X1 Carbon with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/asa-aero
- Bambu Lab X1 Carbon with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/asa-cf
- Bambu Lab X1 Carbon with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/matte-asa-cf
- Bambu Lab X1 Carbon with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pa12-cf
- Bambu Lab X1 Carbon with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pa6-cf
- Bambu Lab X1 Carbon with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pa6-gf
- Bambu Lab X1 Carbon with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/paht-cf
- Bambu Lab X1 Carbon with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pc
- Bambu Lab X1 Carbon with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pc-fr
- Bambu Lab X1 Carbon with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pet-cf
- Bambu Lab X1 Carbon with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/petg-basic
- Bambu Lab X1 Carbon with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/petg-hf
- Bambu Lab X1 Carbon with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/petg-matte
- Bambu Lab X1 Carbon with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/petg-translucent
- Bambu Lab X1 Carbon with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/petg-cf
- Bambu Lab X1 Carbon with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla
- Bambu Lab X1 Carbon with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-aero
- Bambu Lab X1 Carbon with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-basic
- Bambu Lab X1 Carbon with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-basic-gradient
- Bambu Lab X1 Carbon with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-galaxy
- Bambu Lab X1 Carbon with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-glow
- Bambu Lab X1 Carbon with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-lite
- Bambu Lab X1 Carbon with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-marble
- Bambu Lab X1 Carbon with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-matte
- Bambu Lab X1 Carbon with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-metal
- Bambu Lab X1 Carbon with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-pure
- Bambu Lab X1 Carbon with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-silk-dual-color
- Bambu Lab X1 Carbon with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-silk-multi-color
- Bambu Lab X1 Carbon with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-silk-plus
- Bambu Lab X1 Carbon with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-sparkle
- Bambu Lab X1 Carbon with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-tough-plus
- Bambu Lab X1 Carbon with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-translucent
- Bambu Lab X1 Carbon with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-wood
- Bambu Lab X1 Carbon with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pla-cf
- Bambu Lab X1 Carbon with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/ppa-cf
- Bambu Lab X1 Carbon with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pps-cf
- Bambu Lab X1 Carbon with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/pva
- Bambu Lab X1 Carbon with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/silk-pla
- Bambu Lab X1 Carbon with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/support-for-abs
- Bambu Lab X1 Carbon with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/support-for-pa-pet
- Bambu Lab X1 Carbon with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/support-for-pla
- Bambu Lab X1 Carbon with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/support-for-pla-petg
- Bambu Lab X1 Carbon with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/tpu
- Bambu Lab X1 Carbon with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/tpu-85a
- Bambu Lab X1 Carbon with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/tpu-90a
- Bambu Lab X1 Carbon with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/tpu-95a-hf
- Bambu Lab X1 Carbon with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/bambu-lab/tpu-for-ams
- Bambu Lab X1 Carbon with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/asa
- Bambu Lab X1 Carbon with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/cpe
- Bambu Lab X1 Carbon with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/economy-pla
- Bambu Lab X1 Carbon with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/glow-pha
- Bambu Lab X1 Carbon with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/high-speed-pla
- Bambu Lab X1 Carbon with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/lw-ht-pla
- Bambu Lab X1 Carbon with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/matte-pla
- Bambu Lab X1 Carbon with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/petg
- Bambu Lab X1 Carbon with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/pha
- Bambu Lab X1 Carbon with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/pha-pla
- Bambu Lab X1 Carbon with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/pla
- Bambu Lab X1 Carbon with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/r-semi-pla
- Bambu Lab X1 Carbon with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/semi-pla
- Bambu Lab X1 Carbon with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/silk-pla
- Bambu Lab X1 Carbon with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/stonefill-pla
- Bambu Lab X1 Carbon with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/colorfabb/tpu
- Bambu Lab X1 Carbon with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/95a-tpu
- Bambu Lab X1 Carbon with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/abs
- Bambu Lab X1 Carbon with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/cr-petg
- Bambu Lab X1 Carbon with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/cr-pla-carbon
- Bambu Lab X1 Carbon with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/ender-fast-pla
- Bambu Lab X1 Carbon with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/ender-pla-plus
- Bambu Lab X1 Carbon with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hp-asa
- Bambu Lab X1 Carbon with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hp-tpu
- Bambu Lab X1 Carbon with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-abs
- Bambu Lab X1 Carbon with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-luminous-pla
- Bambu Lab X1 Carbon with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-pa6-cf
- Bambu Lab X1 Carbon with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-pc
- Bambu Lab X1 Carbon with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-petg
- Bambu Lab X1 Carbon with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-pla
- Bambu Lab X1 Carbon with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-pla-cf
- Bambu Lab X1 Carbon with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/hyper-rainbow-pla
- Bambu Lab X1 Carbon with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/petg
- Bambu Lab X1 Carbon with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/pla
- Bambu Lab X1 Carbon with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/pla-cf
- Bambu Lab X1 Carbon with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/pla-cr-wood
- Bambu Lab X1 Carbon with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/ppa-cf
- Bambu Lab X1 Carbon with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/silk-pla
- Bambu Lab X1 Carbon with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/soleyin-basic-petg
- Bambu Lab X1 Carbon with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/creality/soleyin-ultra-pla
- Bambu Lab X1 Carbon with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/abs
- Bambu Lab X1 Carbon with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/asa
- Bambu Lab X1 Carbon with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/galaxy-pla
- Bambu Lab X1 Carbon with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/paht-cf
- Bambu Lab X1 Carbon with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pc
- Bambu Lab X1 Carbon with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pc-fr
- Bambu Lab X1 Carbon with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pet-cf
- Bambu Lab X1 Carbon with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/petg
- Bambu Lab X1 Carbon with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/petg-pro
- Bambu Lab X1 Carbon with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/petg-translucent
- Bambu Lab X1 Carbon with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/petg-cf
- Bambu Lab X1 Carbon with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/petg-gf
- Bambu Lab X1 Carbon with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla
- Bambu Lab X1 Carbon with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-basic
- Bambu Lab X1 Carbon with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-glow
- Bambu Lab X1 Carbon with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-marble
- Bambu Lab X1 Carbon with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-matte
- Bambu Lab X1 Carbon with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-metallic
- Bambu Lab X1 Carbon with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-plus
- Bambu Lab X1 Carbon with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-pro
- Bambu Lab X1 Carbon with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-sparkle
- Bambu Lab X1 Carbon with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-wood
- Bambu Lab X1 Carbon with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/pla-cf
- Bambu Lab X1 Carbon with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/rapid-petg
- Bambu Lab X1 Carbon with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/rapid-pla-plus
- Bambu Lab X1 Carbon with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/rapid-tpu-95a
- Bambu Lab X1 Carbon with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/silk-pla
- Bambu Lab X1 Carbon with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/elegoo/tpu-95a
- Bambu Lab X1 Carbon with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/abs
- Bambu Lab X1 Carbon with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/abs-high-speed
- Bambu Lab X1 Carbon with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/abs-cf
- Bambu Lab X1 Carbon with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/abs-gf
- Bambu Lab X1 Carbon with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/abs-pc
- Bambu Lab X1 Carbon with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/abs-plus
- Bambu Lab X1 Carbon with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/asa
- Bambu Lab X1 Carbon with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/asa-high-speed
- Bambu Lab X1 Carbon with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/asa-light-weight
- Bambu Lab X1 Carbon with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/asa-cf
- Bambu Lab X1 Carbon with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/asa-gf
- Bambu Lab X1 Carbon with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pa12-nylon
- Bambu Lab X1 Carbon with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pa12-cf
- Bambu Lab X1 Carbon with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pa12-gf
- Bambu Lab X1 Carbon with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pa6-cf
- Bambu Lab X1 Carbon with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pa6-gf
- Bambu Lab X1 Carbon with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/petg
- Bambu Lab X1 Carbon with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/petg-cf
- Bambu Lab X1 Carbon with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla
- Bambu Lab X1 Carbon with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-burnt-titanium
- Bambu Lab X1 Carbon with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-burnt-titanium-dual-color
- Bambu Lab X1 Carbon with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-burnt-titanium-rainbow
- Bambu Lab X1 Carbon with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-burnt-titanium-triple-color
- Bambu Lab X1 Carbon with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-galaxy
- Bambu Lab X1 Carbon with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-high-speed
- Bambu Lab X1 Carbon with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-light-weight
- Bambu Lab X1 Carbon with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-luminous
- Bambu Lab X1 Carbon with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-marble
- Bambu Lab X1 Carbon with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte
- Bambu Lab X1 Carbon with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte-dual-color
- Bambu Lab X1 Carbon with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte-gradient
- Bambu Lab X1 Carbon with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte-high-speed
- Bambu Lab X1 Carbon with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte-high-speed-gradient-multi-color
- Bambu Lab X1 Carbon with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte-high-speed-rock-rainbow
- Bambu Lab X1 Carbon with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte-high-speed-triple-color
- Bambu Lab X1 Carbon with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-matte-rainbow
- Bambu Lab X1 Carbon with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-metallic
- Bambu Lab X1 Carbon with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-rainbow
- Bambu Lab X1 Carbon with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-silk
- Bambu Lab X1 Carbon with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-silk-high-speed-dual-color
- Bambu Lab X1 Carbon with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-silk-high-speed-quadruple
- Bambu Lab X1 Carbon with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-silk-high-speed-triple-color
- Bambu Lab X1 Carbon with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-silk-rainbow
- Bambu Lab X1 Carbon with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-ultra-silk
- Bambu Lab X1 Carbon with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-wood
- Bambu Lab X1 Carbon with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-cf
- Bambu Lab X1 Carbon with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-plus
- Bambu Lab X1 Carbon with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pla-plus-high-speed
- Bambu Lab X1 Carbon with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pp
- Bambu Lab X1 Carbon with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/pp-cf
- Bambu Lab X1 Carbon with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/tpu
- Bambu Lab X1 Carbon with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/tpu-90a
- Bambu Lab X1 Carbon with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/tpu-high-speed
- Bambu Lab X1 Carbon with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/eryone/tpu-rainbow
- Bambu Lab X1 Carbon with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/abs-plus
- Bambu Lab X1 Carbon with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/abs-pluscf
- Bambu Lab X1 Carbon with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/abs-plushs
- Bambu Lab X1 Carbon with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/asa-plus
- Bambu Lab X1 Carbon with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/dark-twinkling-pla-magic
- Bambu Lab X1 Carbon with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/epaht-cf
- Bambu Lab X1 Carbon with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/epla-plushs
- Bambu Lab X1 Carbon with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/esun-petg-matte
- Bambu Lab X1 Carbon with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/mystic-silk-pla
- Bambu Lab X1 Carbon with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pa12-cf
- Bambu Lab X1 Carbon with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pa6-pa
- Bambu Lab X1 Carbon with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pa6-pa-cf
- Bambu Lab X1 Carbon with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/peak-pla
- Bambu Lab X1 Carbon with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pet
- Bambu Lab X1 Carbon with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/petg
- Bambu Lab X1 Carbon with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/petg-basic
- Bambu Lab X1 Carbon with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/petg-matte
- Bambu Lab X1 Carbon with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/petg-pluscf
- Bambu Lab X1 Carbon with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/petg-plushs
- Bambu Lab X1 Carbon with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-basic
- Bambu Lab X1 Carbon with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-cf
- Bambu Lab X1 Carbon with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-chameleon
- Bambu Lab X1 Carbon with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-hs
- Bambu Lab X1 Carbon with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-lite
- Bambu Lab X1 Carbon with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-luminous
- Bambu Lab X1 Carbon with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-luminous-rainbow
- Bambu Lab X1 Carbon with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-lw
- Bambu Lab X1 Carbon with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-marble
- Bambu Lab X1 Carbon with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-matte
- Bambu Lab X1 Carbon with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-metal
- Bambu Lab X1 Carbon with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-silk
- Bambu Lab X1 Carbon with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-silk-candy
- Bambu Lab X1 Carbon with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-silk-magic
- Bambu Lab X1 Carbon with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-silk-metal
- Bambu Lab X1 Carbon with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-silk-rainbow
- Bambu Lab X1 Carbon with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-st
- Bambu Lab X1 Carbon with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-stars
- Bambu Lab X1 Carbon with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-wood
- Bambu Lab X1 Carbon with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-plus
- Bambu Lab X1 Carbon with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pla-plus-cmyk
- Bambu Lab X1 Carbon with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/pva
- Bambu Lab X1 Carbon with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/silk-petg
- Bambu Lab X1 Carbon with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/tpe-83a
- Bambu Lab X1 Carbon with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/tpu-95a
- Bambu Lab X1 Carbon with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/tpu-lw
- Bambu Lab X1 Carbon with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/esun-3d/uv-change-pla-uv-color-change
- Bambu Lab X1 Carbon with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/basic-pla
- Bambu Lab X1 Carbon with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/biofusion-pla
- Bambu Lab X1 Carbon with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/biofusion-silk-pla
- Bambu Lab X1 Carbon with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/durapro-abs
- Bambu Lab X1 Carbon with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/durapro-asa
- Bambu Lab X1 Carbon with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/durapro-cf-pa12
- Bambu Lab X1 Carbon with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/durapro-matte-asa
- Bambu Lab X1 Carbon with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/durapro-pa12
- Bambu Lab X1 Carbon with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/durapro-pbt-pc
- Bambu Lab X1 Carbon with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/flax-pla
- Bambu Lab X1 Carbon with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/flex-hard-cf-tpu
- Bambu Lab X1 Carbon with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/flex-hard-tpu
- Bambu Lab X1 Carbon with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/flex-medium-tpu
- Bambu Lab X1 Carbon with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/flex-semisoft-tpu
- Bambu Lab X1 Carbon with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/glow-petg
- Bambu Lab X1 Carbon with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/greentec-matte-pla
- Bambu Lab X1 Carbon with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/greentec-pla
- Bambu Lab X1 Carbon with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/pctg
- Bambu Lab X1 Carbon with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/pearl-pla
- Bambu Lab X1 Carbon with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/petg
- Bambu Lab X1 Carbon with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/pla-nx2-matt
- Bambu Lab X1 Carbon with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/extrudr/wood-pla
- Bambu Lab X1 Carbon with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 105 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/fillamentum/asa-extrafill
- Bambu Lab X1 Carbon with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/fillamentum/cpe-hg100
- Bambu Lab X1 Carbon with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/fillamentum/pla-crystal-clear
- Bambu Lab X1 Carbon with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/fillamentum/pla-extrafill
- Bambu Lab X1 Carbon with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/abs
- Bambu Lab X1 Carbon with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/glow-abs
- Bambu Lab X1 Carbon with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/glow-pla
- Bambu Lab X1 Carbon with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/metallic-finish-pla
- Bambu Lab X1 Carbon with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/petg
- Bambu Lab X1 Carbon with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/pla
- Bambu Lab X1 Carbon with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/pla-basic
- Bambu Lab X1 Carbon with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/pla-cf
- Bambu Lab X1 Carbon with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/pla-matte
- Bambu Lab X1 Carbon with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/pla-max
- Bambu Lab X1 Carbon with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/pla-metal
- Bambu Lab X1 Carbon with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/pla-pro
- Bambu Lab X1 Carbon with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/silk-pla
- Bambu Lab X1 Carbon with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/tpu
- Bambu Lab X1 Carbon with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/transparent-pla
- Bambu Lab X1 Carbon with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/uv-color-changing-pla
- Bambu Lab X1 Carbon with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/hatchbox/wood-pla
- Bambu Lab X1 Carbon with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/abs
- Bambu Lab X1 Carbon with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/carbon-fiber-nylon
- Bambu Lab X1 Carbon with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/galaxy-pla
- Bambu Lab X1 Carbon with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/glow-abs
- Bambu Lab X1 Carbon with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/high-speed-pla-plus
- Bambu Lab X1 Carbon with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/petg-plus
- Bambu Lab X1 Carbon with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla
- Bambu Lab X1 Carbon with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla-basic
- Bambu Lab X1 Carbon with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla-chameleon
- Bambu Lab X1 Carbon with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla-glitter-rainbow
- Bambu Lab X1 Carbon with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla-matte
- Bambu Lab X1 Carbon with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla-mystic-silk
- Bambu Lab X1 Carbon with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla-silk-rainbow
- Bambu Lab X1 Carbon with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/pla-plus
- Bambu Lab X1 Carbon with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/silk-pla
- Bambu Lab X1 Carbon with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/inland/tpu
- Bambu Lab X1 Carbon with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/jayo/high-speed-matte-pla
- Bambu Lab X1 Carbon with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/jayo/matte-pla
- Bambu Lab X1 Carbon with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/jayo/petg
- Bambu Lab X1 Carbon with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/jayo/pla
- Bambu Lab X1 Carbon with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/jayo/pla-plus
- Bambu Lab X1 Carbon with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/jayo/silk-pla
- Bambu Lab X1 Carbon with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/jayo/tpu
- Bambu Lab X1 Carbon with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/abs
- Bambu Lab X1 Carbon with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/glow-pla
- Bambu Lab X1 Carbon with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/high-speed-petg
- Bambu Lab X1 Carbon with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/high-speed-pla
- Bambu Lab X1 Carbon with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/matte-pla
- Bambu Lab X1 Carbon with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/petg
- Bambu Lab X1 Carbon with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/petg-cf
- Bambu Lab X1 Carbon with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/pla
- Bambu Lab X1 Carbon with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/pla-basic
- Bambu Lab X1 Carbon with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/pla-cf
- Bambu Lab X1 Carbon with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/silk-pla
- Bambu Lab X1 Carbon with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/kingroon/tpu
- Bambu Lab X1 Carbon with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/abs
- Bambu Lab X1 Carbon with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/abs-basic
- Bambu Lab X1 Carbon with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/asa
- Bambu Lab X1 Carbon with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/asa-basic
- Bambu Lab X1 Carbon with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/easy-nylon
- Bambu Lab X1 Carbon with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/glow-abs
- Bambu Lab X1 Carbon with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/glow-pla
- Bambu Lab X1 Carbon with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/high-speed-petg
- Bambu Lab X1 Carbon with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/high-speed-pla
- Bambu Lab X1 Carbon with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/high-speed-tpu
- Bambu Lab X1 Carbon with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/luminous-high-speed-glow-tpu
- Bambu Lab X1 Carbon with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/matte-pla
- Bambu Lab X1 Carbon with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pc
- Bambu Lab X1 Carbon with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pc-professional
- Bambu Lab X1 Carbon with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/petg
- Bambu Lab X1 Carbon with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/petg-basic
- Bambu Lab X1 Carbon with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/petg-refill
- Bambu Lab X1 Carbon with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla
- Bambu Lab X1 Carbon with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-air
- Bambu Lab X1 Carbon with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-cf
- Bambu Lab X1 Carbon with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-cream
- Bambu Lab X1 Carbon with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-easy
- Bambu Lab X1 Carbon with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-easy-glow
- Bambu Lab X1 Carbon with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-plus
- Bambu Lab X1 Carbon with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-professional
- Bambu Lab X1 Carbon with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-refill
- Bambu Lab X1 Carbon with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-rock
- Bambu Lab X1 Carbon with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-super
- Bambu Lab X1 Carbon with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/pla-turbo-rapid
- Bambu Lab X1 Carbon with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/shimmer-pla
- Bambu Lab X1 Carbon with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/silk-pla
- Bambu Lab X1 Carbon with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/overture/tpu
- Bambu Lab X1 Carbon with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/abs
- Bambu Lab X1 Carbon with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/asa
- Bambu Lab X1 Carbon with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/cpe
- Bambu Lab X1 Carbon with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/creator-special-edition-pla
- Bambu Lab X1 Carbon with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/draft-pla
- Bambu Lab X1 Carbon with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/dual-panchroma-matte-pla
- Bambu Lab X1 Carbon with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/for-production-matte-pla
- Bambu Lab X1 Carbon with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/glow-pla
- Bambu Lab X1 Carbon with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/gradient-panchroma-pla
- Bambu Lab X1 Carbon with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/ht-pla-pro
- Bambu Lab X1 Carbon with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/ht-pla
- Bambu Lab X1 Carbon with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/ht-pla-gf
- Bambu Lab X1 Carbon with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/lw-polylite-pla
- Bambu Lab X1 Carbon with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/metallic-polylite-pla
- Bambu Lab X1 Carbon with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/metallic-polylite-silk-abs
- Bambu Lab X1 Carbon with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/metallic-polylite-silk-pla
- Bambu Lab X1 Carbon with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/muted-panchroma-matte-pla
- Bambu Lab X1 Carbon with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/neon-panchroma-pla
- Bambu Lab X1 Carbon with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pa12-cf
- Bambu Lab X1 Carbon with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pa6-cf
- Bambu Lab X1 Carbon with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pa6-gf
- Bambu Lab X1 Carbon with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/panchroma-cope
- Bambu Lab X1 Carbon with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/panchroma-glow-pla
- Bambu Lab X1 Carbon with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/panchroma-pla
- Bambu Lab X1 Carbon with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/panchroma-silk-pla
- Bambu Lab X1 Carbon with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pc
- Bambu Lab X1 Carbon with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 105 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pc-abs
- Bambu Lab X1 Carbon with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pc-pbt
- Bambu Lab X1 Carbon with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pet-cf
- Bambu Lab X1 Carbon with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/petg
- Bambu Lab X1 Carbon with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/petg-cf
- Bambu Lab X1 Carbon with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pla
- Bambu Lab X1 Carbon with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pla-cf
- Bambu Lab X1 Carbon with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pla-polycast
- Bambu Lab X1 Carbon with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polyflex-95-hf-high-speed-tpu
- Bambu Lab X1 Carbon with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polyflex-tpu
- Bambu Lab X1 Carbon with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polylite-abs
- Bambu Lab X1 Carbon with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polylite-asa
- Bambu Lab X1 Carbon with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polylite-pc
- Bambu Lab X1 Carbon with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polylite-petg
- Bambu Lab X1 Carbon with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polylite-pla
- Bambu Lab X1 Carbon with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polylite-pla-cf
- Bambu Lab X1 Carbon with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polymaker-pla-pro
- Bambu Lab X1 Carbon with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polymax-pc
- Bambu Lab X1 Carbon with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polymax-petg
- Bambu Lab X1 Carbon with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polymax-pla
- Bambu Lab X1 Carbon with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polymide-copa-pa6
- Bambu Lab X1 Carbon with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polysmooth
- Bambu Lab X1 Carbon with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polysonic-pla
- Bambu Lab X1 Carbon with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/polysupport-for-pla
- Bambu Lab X1 Carbon with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pps-cf
- Bambu Lab X1 Carbon with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pva
- Bambu Lab X1 Carbon with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pva-polydissolve-s1
- Bambu Lab X1 Carbon with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pva-polysupport-for-pa12
- Bambu Lab X1 Carbon with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/pvb
- Bambu Lab X1 Carbon with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/satin-panchroma-pla
- Bambu Lab X1 Carbon with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/silk-abs
- Bambu Lab X1 Carbon with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/silk-pla
- Bambu Lab X1 Carbon with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/polymaker/wood-pla
- Bambu Lab X1 Carbon with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/basic-pla
- Bambu Lab X1 Carbon with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/conductive-pla
- Bambu Lab X1 Carbon with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/fiber-ht-matte-pla
- Bambu Lab X1 Carbon with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/fluorescent-pla
- Bambu Lab X1 Carbon with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/glitter-petg
- Bambu Lab X1 Carbon with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/glitter-pla
- Bambu Lab X1 Carbon with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/glow-pla
- Bambu Lab X1 Carbon with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/high-speed-pla
- Bambu Lab X1 Carbon with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/iron-metal-composite-pla
- Bambu Lab X1 Carbon with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/marble-pla
- Bambu Lab X1 Carbon with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/matte-pla
- Bambu Lab X1 Carbon with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/metal-composite-pla
- Bambu Lab X1 Carbon with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/metallic-petg
- Bambu Lab X1 Carbon with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/metallic-pla
- Bambu Lab X1 Carbon with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/multicolor-pla
- Bambu Lab X1 Carbon with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/nebula-pla
- Bambu Lab X1 Carbon with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/opaque-pla
- Bambu Lab X1 Carbon with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/pearl-pla
- Bambu Lab X1 Carbon with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/petg
- Bambu Lab X1 Carbon with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/petg-cf
- Bambu Lab X1 Carbon with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/pla
- Bambu Lab X1 Carbon with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/pla-cf
- Bambu Lab X1 Carbon with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/pla-green-glow-in-the-dark
- Bambu Lab X1 Carbon with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/recycled-petg
- Bambu Lab X1 Carbon with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/recycled-pla
- Bambu Lab X1 Carbon with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/satin-pla
- Bambu Lab X1 Carbon with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/silk-petg
- Bambu Lab X1 Carbon with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/silk-pla
- Bambu Lab X1 Carbon with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/simply-petg
- Bambu Lab X1 Carbon with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/stainless-steel-metal-composite-pla
- Bambu Lab X1 Carbon with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/static-dissipative-carbon-fiber-pla
- Bambu Lab X1 Carbon with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/static-dissipative-petg
- Bambu Lab X1 Carbon with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/static-dissipative-pla
- Bambu Lab X1 Carbon with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/steel-metal-composite-pla
- Bambu Lab X1 Carbon with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/still-colorful-recycled-pla
- Bambu Lab X1 Carbon with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/thermochromic-pla
- Bambu Lab X1 Carbon with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/tpe
- Bambu Lab X1 Carbon with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/tpu
- Bambu Lab X1 Carbon with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/translucent-petg
- Bambu Lab X1 Carbon with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/protopasta/translucent-pla
- Bambu Lab X1 Carbon with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/asa
- Bambu Lab X1 Carbon with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/blend-silk-pla
- Bambu Lab X1 Carbon with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/matte-petg
- Bambu Lab X1 Carbon with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/mystic-premium-pla
- Bambu Lab X1 Carbon with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 115 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pa11-cf
- Bambu Lab X1 Carbon with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pc
- Bambu Lab X1 Carbon with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pc-blend
- Bambu Lab X1 Carbon with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pc-cf
- Bambu Lab X1 Carbon with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pei
- Bambu Lab X1 Carbon with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pei-1010
- Bambu Lab X1 Carbon with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/petg
- Bambu Lab X1 Carbon with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/petg-cf
- Bambu Lab X1 Carbon with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/petg-magnetite
- Bambu Lab X1 Carbon with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/petg-tungsten
- Bambu Lab X1 Carbon with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/petg-v0
- Bambu Lab X1 Carbon with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pla
- Bambu Lab X1 Carbon with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pla-recycled
- Bambu Lab X1 Carbon with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pla-woodfill
- Bambu Lab X1 Carbon with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pp-cf
- Bambu Lab X1 Carbon with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pp-gf
- Bambu Lab X1 Carbon with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/pvb
- Bambu Lab X1 Carbon with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/rpla
- Bambu Lab X1 Carbon with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/prusament/tpu-95a
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-abs-ht-hf
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-abs-cf-core
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-abs-gf
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-asa-gf
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-pet-cf
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-pet-gf
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-petg-cf-pro
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-ppa
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-ppa-cf
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-ppa-cf-core
- Bambu Lab X1 Carbon with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/fibreheart-tpu-gf
- Bambu Lab X1 Carbon with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/flex-tpu-64d
- Bambu Lab X1 Carbon with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/flex-tpu-85a
- Bambu Lab X1 Carbon with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/flex-tpu-air-85a
- Bambu Lab X1 Carbon with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/rebound-peba-85a
- Bambu Lab X1 Carbon with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/rebound-peba-95a
- Bambu Lab X1 Carbon with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/rebound-peba-air-95a
- Bambu Lab X1 Carbon with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/roamr-tpu-air-hr-80a
- Bambu Lab X1 Carbon with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/siraya-tech/roamr-tpu-air-hr-85a
- Bambu Lab X1 Carbon with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/95a-high-speed-tpu
- Bambu Lab X1 Carbon with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/abs
- Bambu Lab X1 Carbon with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/abs-fr
- Bambu Lab X1 Carbon with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/apla
- Bambu Lab X1 Carbon with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/asa
- Bambu Lab X1 Carbon with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/fluorescent-pla
- Bambu Lab X1 Carbon with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/glow-petg
- Bambu Lab X1 Carbon with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/glow-pla
- Bambu Lab X1 Carbon with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/high-speed-abs
- Bambu Lab X1 Carbon with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/high-speed-matte-petg
- Bambu Lab X1 Carbon with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/high-speed-matte-pla
- Bambu Lab X1 Carbon with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/high-speed-petg
- Bambu Lab X1 Carbon with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/high-speed-pla
- Bambu Lab X1 Carbon with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/high-speed-pla-marble
- Bambu Lab X1 Carbon with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/high-speed-pla-plus
- Bambu Lab X1 Carbon with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/luminous-glow-in-the-dark-petg
- Bambu Lab X1 Carbon with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/matte-petg-cf
- Bambu Lab X1 Carbon with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pa12-cf
- Bambu Lab X1 Carbon with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pa6-easy-pa
- Bambu Lab X1 Carbon with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pa6-cf
- Bambu Lab X1 Carbon with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pa6-gf
- Bambu Lab X1 Carbon with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pc
- Bambu Lab X1 Carbon with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pc-abs
- Bambu Lab X1 Carbon with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pcl
- Bambu Lab X1 Carbon with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/peek
- Bambu Lab X1 Carbon with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/petg
- Bambu Lab X1 Carbon with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/petg-2-0
- Bambu Lab X1 Carbon with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/petg-carbon-fiber
- Bambu Lab X1 Carbon with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/petg-glow-in-the-dark-filament
- Bambu Lab X1 Carbon with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla
- Bambu Lab X1 Carbon with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-carbon-fiber
- Bambu Lab X1 Carbon with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-cf
- Bambu Lab X1 Carbon with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-classic
- Bambu Lab X1 Carbon with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-galaxy
- Bambu Lab X1 Carbon with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-glow-in-the-dark
- Bambu Lab X1 Carbon with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-matte
- Bambu Lab X1 Carbon with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-matte-dual-color
- Bambu Lab X1 Carbon with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-rainbow
- Bambu Lab X1 Carbon with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-silk
- Bambu Lab X1 Carbon with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-transparent-rainbow
- Bambu Lab X1 Carbon with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-twinkling
- Bambu Lab X1 Carbon with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-wood
- Bambu Lab X1 Carbon with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-meta
- Bambu Lab X1 Carbon with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-plus
- Bambu Lab X1 Carbon with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pla-plus-2-0
- Bambu Lab X1 Carbon with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pp
- Bambu Lab X1 Carbon with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pva
- Bambu Lab X1 Carbon with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/pvb
- Bambu Lab X1 Carbon with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/real-wood-fiber-pla
- Bambu Lab X1 Carbon with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/silk-2-0
- Bambu Lab X1 Carbon with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/silk-pla-plus
- Bambu Lab X1 Carbon with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/silk-pla-plus-dual-color
- Bambu Lab X1 Carbon with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/silk-pla-plus-four-color
- Bambu Lab X1 Carbon with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/silk-pla-plus-rainbow
- Bambu Lab X1 Carbon with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/silk-pla-plus-tri-color
- Bambu Lab X1 Carbon with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/temperature-color-change-pla
- Bambu Lab X1 Carbon with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/tpu
- Bambu Lab X1 Carbon with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/tpu-silk
- Bambu Lab X1 Carbon with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/tpu90a
- Bambu Lab X1 Carbon with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/tpu95a
- Bambu Lab X1 Carbon with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/transparent-clear-pla
- Bambu Lab X1 Carbon with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/bambu-lab-x1-carbon/sunlu/upgrade-pla
- Prusa MK4S with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/90a-flexible-peba
- Prusa MK4S with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/basic-matte-pla
- Prusa MK4S with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/basic-silk-pla
- Prusa MK4S with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/conductive-pla
- Prusa MK4S with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/crystal-transparent-pla
- Prusa MK4S with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/dual-color-matte-pla
- Prusa MK4S with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/dual-color-silk-pla
- Prusa MK4S with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Prusa MK4S with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/glow-pla
- Prusa MK4S with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/glow-tpu
- Prusa MK4S with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/high-speed-pla
- Prusa MK4S with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/marble-pla
- Prusa MK4S with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/matte-pla
- Prusa MK4S with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/peba
- Prusa MK4S with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/petg
- Prusa MK4S with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/pla
- Prusa MK4S with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/amolen/pla-cf
- Prusa MK4S with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/pla-metal
- Prusa MK4S with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/quad-color-silk-pla
- Prusa MK4S with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/rainbow-silk-pla
- Prusa MK4S with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/s-series-silk-pla
- Prusa MK4S with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/shiny-glitter-silk-pla
- Prusa MK4S with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/shiny-gradient-silk-pla
- Prusa MK4S with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/amolen/silk-gf-pla
- Prusa MK4S with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/silk-pla
- Prusa MK4S with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/temperature-color-change-pla
- Prusa MK4S with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/tpu
- Prusa MK4S with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/transparent-pla
- Prusa MK4S with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/triple-color-matte-pla
- Prusa MK4S with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/triple-color-silk-pla
- Prusa MK4S with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/uv-color-change-pla
- Prusa MK4S with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/amolen/wood-pla
- Prusa MK4S with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/abs
- Prusa MK4S with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/asa
- Prusa MK4S with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/high-speed-pla
- Prusa MK4S with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/petg
- Prusa MK4S with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-basic
- Prusa MK4S with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-galaxy
- Prusa MK4S with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-marble
- Prusa MK4S with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-matte
- Prusa MK4S with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-metal
- Prusa MK4S with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-plus
- Prusa MK4S with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-silk
- Prusa MK4S with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-silk-dual-tricolor
- Prusa MK4S with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/pla-special
- Prusa MK4S with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/tpu
- Prusa MK4S with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/anycubic/translucent-petg
- Prusa MK4S with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/abs
- Prusa MK4S with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/abs-gf
- Prusa MK4S with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/asa
- Prusa MK4S with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/asa-aero
- Prusa MK4S with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/asa-cf
- Prusa MK4S with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/matte-asa-cf
- Prusa MK4S with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pa12-cf
- Prusa MK4S with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pa6-cf
- Prusa MK4S with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pa6-gf
- Prusa MK4S with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/paht-cf
- Prusa MK4S with Bambu Lab PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pc
- Prusa MK4S with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pc-fr
- Prusa MK4S with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pet-cf
- Prusa MK4S with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/petg-basic
- Prusa MK4S with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/petg-hf
- Prusa MK4S with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/petg-matte
- Prusa MK4S with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/petg-translucent
- Prusa MK4S with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/petg-cf
- Prusa MK4S with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla
- Prusa MK4S with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-aero
- Prusa MK4S with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 45 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-basic
- Prusa MK4S with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-basic-gradient
- Prusa MK4S with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-galaxy
- Prusa MK4S with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-glow
- Prusa MK4S with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-lite
- Prusa MK4S with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-marble
- Prusa MK4S with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-matte
- Prusa MK4S with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-metal
- Prusa MK4S with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-pure
- Prusa MK4S with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-silk-dual-color
- Prusa MK4S with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-silk-multi-color
- Prusa MK4S with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-silk-plus
- Prusa MK4S with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-sparkle
- Prusa MK4S with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-tough-plus
- Prusa MK4S with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-translucent
- Prusa MK4S with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-wood
- Prusa MK4S with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pla-cf
- Prusa MK4S with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/ppa-cf
- Prusa MK4S with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pps-cf
- Prusa MK4S with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/pva
- Prusa MK4S with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/silk-pla
- Prusa MK4S with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/support-for-abs
- Prusa MK4S with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/support-for-pa-pet
- Prusa MK4S with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/support-for-pla
- Prusa MK4S with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/support-for-pla-petg
- Prusa MK4S with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/tpu
- Prusa MK4S with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 35 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/tpu-85a
- Prusa MK4S with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 35 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/tpu-90a
- Prusa MK4S with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/tpu-95a-hf
- Prusa MK4S with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/bambu-lab/tpu-for-ams
- Prusa MK4S with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/asa
- Prusa MK4S with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/cpe
- Prusa MK4S with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/economy-pla
- Prusa MK4S with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/glow-pha
- Prusa MK4S with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/high-speed-pla
- Prusa MK4S with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/lw-ht-pla
- Prusa MK4S with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/matte-pla
- Prusa MK4S with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/petg
- Prusa MK4S with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/pha
- Prusa MK4S with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/pha-pla
- Prusa MK4S with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/pla
- Prusa MK4S with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/r-semi-pla
- Prusa MK4S with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/semi-pla
- Prusa MK4S with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/silk-pla
- Prusa MK4S with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/stonefill-pla
- Prusa MK4S with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/colorfabb/tpu
- Prusa MK4S with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/95a-tpu
- Prusa MK4S with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/abs
- Prusa MK4S with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/cr-petg
- Prusa MK4S with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/cr-pla-carbon
- Prusa MK4S with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/ender-fast-pla
- Prusa MK4S with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/ender-pla-plus
- Prusa MK4S with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hp-asa
- Prusa MK4S with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hp-tpu
- Prusa MK4S with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-abs
- Prusa MK4S with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-luminous-pla
- Prusa MK4S with Creality Hyper PA6-CF: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-pa6-cf
- Prusa MK4S with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-pc
- Prusa MK4S with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-petg
- Prusa MK4S with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-pla
- Prusa MK4S with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-pla-cf
- Prusa MK4S with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/hyper-rainbow-pla
- Prusa MK4S with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/petg
- Prusa MK4S with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/pla
- Prusa MK4S with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/creality/pla-cf
- Prusa MK4S with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/pla-cr-wood
- Prusa MK4S with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/creality/ppa-cf
- Prusa MK4S with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/silk-pla
- Prusa MK4S with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/soleyin-basic-petg
- Prusa MK4S with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/creality/soleyin-ultra-pla
- Prusa MK4S with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/abs
- Prusa MK4S with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/asa
- Prusa MK4S with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/galaxy-pla
- Prusa MK4S with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/elegoo/paht-cf
- Prusa MK4S with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pc
- Prusa MK4S with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pc-fr
- Prusa MK4S with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pet-cf
- Prusa MK4S with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/petg
- Prusa MK4S with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/petg-pro
- Prusa MK4S with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/petg-translucent
- Prusa MK4S with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/petg-cf
- Prusa MK4S with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/elegoo/petg-gf
- Prusa MK4S with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla
- Prusa MK4S with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-basic
- Prusa MK4S with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-glow
- Prusa MK4S with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-marble
- Prusa MK4S with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-matte
- Prusa MK4S with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-metallic
- Prusa MK4S with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-plus
- Prusa MK4S with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-pro
- Prusa MK4S with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-sparkle
- Prusa MK4S with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-wood
- Prusa MK4S with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/elegoo/pla-cf
- Prusa MK4S with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/rapid-petg
- Prusa MK4S with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/rapid-pla-plus
- Prusa MK4S with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/rapid-tpu-95a
- Prusa MK4S with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/silk-pla
- Prusa MK4S with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/elegoo/tpu-95a
- Prusa MK4S with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/abs
- Prusa MK4S with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/abs-high-speed
- Prusa MK4S with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/abs-cf
- Prusa MK4S with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/abs-gf
- Prusa MK4S with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/abs-pc
- Prusa MK4S with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/abs-plus
- Prusa MK4S with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/asa
- Prusa MK4S with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/asa-high-speed
- Prusa MK4S with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/asa-light-weight
- Prusa MK4S with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/asa-cf
- Prusa MK4S with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/asa-gf
- Prusa MK4S with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pa12-nylon
- Prusa MK4S with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/pa12-cf
- Prusa MK4S with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/pa12-gf
- Prusa MK4S with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/pa6-cf
- Prusa MK4S with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/pa6-gf
- Prusa MK4S with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/petg
- Prusa MK4S with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/petg-cf
- Prusa MK4S with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla
- Prusa MK4S with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-burnt-titanium
- Prusa MK4S with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-burnt-titanium-dual-color
- Prusa MK4S with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-burnt-titanium-rainbow
- Prusa MK4S with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-burnt-titanium-triple-color
- Prusa MK4S with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-galaxy
- Prusa MK4S with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-high-speed
- Prusa MK4S with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-light-weight
- Prusa MK4S with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-luminous
- Prusa MK4S with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-marble
- Prusa MK4S with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte
- Prusa MK4S with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte-dual-color
- Prusa MK4S with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte-gradient
- Prusa MK4S with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte-high-speed
- Prusa MK4S with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte-high-speed-gradient-multi-color
- Prusa MK4S with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte-high-speed-rock-rainbow
- Prusa MK4S with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte-high-speed-triple-color
- Prusa MK4S with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-matte-rainbow
- Prusa MK4S with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-metallic
- Prusa MK4S with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-rainbow
- Prusa MK4S with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-silk
- Prusa MK4S with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-silk-high-speed-dual-color
- Prusa MK4S with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-silk-high-speed-quadruple
- Prusa MK4S with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-silk-high-speed-triple-color
- Prusa MK4S with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-silk-rainbow
- Prusa MK4S with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-ultra-silk
- Prusa MK4S with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-wood
- Prusa MK4S with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-cf
- Prusa MK4S with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-plus
- Prusa MK4S with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pla-plus-high-speed
- Prusa MK4S with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/pp
- Prusa MK4S with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/eryone/pp-cf
- Prusa MK4S with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/tpu
- Prusa MK4S with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/tpu-90a
- Prusa MK4S with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/tpu-high-speed
- Prusa MK4S with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/eryone/tpu-rainbow
- Prusa MK4S with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/abs-plus
- Prusa MK4S with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/abs-pluscf
- Prusa MK4S with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/abs-plushs
- Prusa MK4S with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/asa-plus
- Prusa MK4S with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/dark-twinkling-pla-magic
- Prusa MK4S with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/epaht-cf
- Prusa MK4S with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/epla-plushs
- Prusa MK4S with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/esun-petg-matte
- Prusa MK4S with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/mystic-silk-pla
- Prusa MK4S with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pa12-cf
- Prusa MK4S with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pa6-pa
- Prusa MK4S with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pa6-pa-cf
- Prusa MK4S with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/peak-pla
- Prusa MK4S with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pet
- Prusa MK4S with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/petg
- Prusa MK4S with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/petg-basic
- Prusa MK4S with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/petg-matte
- Prusa MK4S with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/petg-pluscf
- Prusa MK4S with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/petg-plushs
- Prusa MK4S with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-basic
- Prusa MK4S with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-cf
- Prusa MK4S with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-chameleon
- Prusa MK4S with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-hs
- Prusa MK4S with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-lite
- Prusa MK4S with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-luminous
- Prusa MK4S with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-luminous-rainbow
- Prusa MK4S with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-lw
- Prusa MK4S with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-marble
- Prusa MK4S with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-matte
- Prusa MK4S with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-metal
- Prusa MK4S with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-silk
- Prusa MK4S with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-silk-candy
- Prusa MK4S with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-silk-magic
- Prusa MK4S with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-silk-metal
- Prusa MK4S with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-silk-rainbow
- Prusa MK4S with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-st
- Prusa MK4S with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-stars
- Prusa MK4S with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-wood
- Prusa MK4S with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-plus
- Prusa MK4S with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pla-plus-cmyk
- Prusa MK4S with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/pva
- Prusa MK4S with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/silk-petg
- Prusa MK4S with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/tpe-83a
- Prusa MK4S with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/tpu-95a
- Prusa MK4S with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/tpu-lw
- Prusa MK4S with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/esun-3d/uv-change-pla-uv-color-change
- Prusa MK4S with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/basic-pla
- Prusa MK4S with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/biofusion-pla
- Prusa MK4S with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/biofusion-silk-pla
- Prusa MK4S with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/durapro-abs
- Prusa MK4S with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/durapro-asa
- Prusa MK4S with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/extrudr/durapro-cf-pa12
- Prusa MK4S with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/durapro-matte-asa
- Prusa MK4S with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/durapro-pa12
- Prusa MK4S with extrudr DuraPro PBT PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/durapro-pbt-pc
- Prusa MK4S with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/flax-pla
- Prusa MK4S with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/extrudr/flex-hard-cf-tpu
- Prusa MK4S with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/flex-hard-tpu
- Prusa MK4S with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/flex-medium-tpu
- Prusa MK4S with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/flex-semisoft-tpu
- Prusa MK4S with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/glow-petg
- Prusa MK4S with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/greentec-matte-pla
- Prusa MK4S with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/greentec-pla
- Prusa MK4S with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/pctg
- Prusa MK4S with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/pearl-pla
- Prusa MK4S with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/petg
- Prusa MK4S with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/pla-nx2-matt
- Prusa MK4S with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/extrudr/wood-pla
- Prusa MK4S with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 290 °C. The listed bed maximum of 105 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/fillamentum/asa-extrafill
- Prusa MK4S with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/fillamentum/cpe-hg100
- Prusa MK4S with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 55 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/fillamentum/pla-crystal-clear
- Prusa MK4S with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/fillamentum/pla-extrafill
- Prusa MK4S with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/abs
- Prusa MK4S with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/glow-abs
- Prusa MK4S with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/glow-pla
- Prusa MK4S with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/metallic-finish-pla
- Prusa MK4S with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/petg
- Prusa MK4S with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/pla
- Prusa MK4S with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/pla-basic
- Prusa MK4S with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/pla-cf
- Prusa MK4S with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/pla-matte
- Prusa MK4S with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/pla-max
- Prusa MK4S with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/pla-metal
- Prusa MK4S with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/pla-pro
- Prusa MK4S with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/silk-pla
- Prusa MK4S with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/tpu
- Prusa MK4S with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/transparent-pla
- Prusa MK4S with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/uv-color-changing-pla
- Prusa MK4S with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/hatchbox/wood-pla
- Prusa MK4S with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/abs
- Prusa MK4S with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/carbon-fiber-nylon
- Prusa MK4S with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/galaxy-pla
- Prusa MK4S with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/glow-abs
- Prusa MK4S with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/high-speed-pla-plus
- Prusa MK4S with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/petg-plus
- Prusa MK4S with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla
- Prusa MK4S with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla-basic
- Prusa MK4S with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla-chameleon
- Prusa MK4S with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla-glitter-rainbow
- Prusa MK4S with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla-matte
- Prusa MK4S with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla-mystic-silk
- Prusa MK4S with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla-silk-rainbow
- Prusa MK4S with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/pla-plus
- Prusa MK4S with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/silk-pla
- Prusa MK4S with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/inland/tpu
- Prusa MK4S with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/jayo/high-speed-matte-pla
- Prusa MK4S with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/jayo/matte-pla
- Prusa MK4S with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/jayo/petg
- Prusa MK4S with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/jayo/pla
- Prusa MK4S with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/jayo/pla-plus
- Prusa MK4S with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/jayo/silk-pla
- Prusa MK4S with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/jayo/tpu
- Prusa MK4S with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/abs
- Prusa MK4S with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/glow-pla
- Prusa MK4S with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/high-speed-petg
- Prusa MK4S with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/high-speed-pla
- Prusa MK4S with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/matte-pla
- Prusa MK4S with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/petg
- Prusa MK4S with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/kingroon/petg-cf
- Prusa MK4S with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/pla
- Prusa MK4S with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/pla-basic
- Prusa MK4S with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/kingroon/pla-cf
- Prusa MK4S with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/silk-pla
- Prusa MK4S with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/kingroon/tpu
- Prusa MK4S with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/abs
- Prusa MK4S with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/abs-basic
- Prusa MK4S with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/asa
- Prusa MK4S with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/asa-basic
- Prusa MK4S with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/easy-nylon
- Prusa MK4S with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/glow-abs
- Prusa MK4S with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/glow-pla
- Prusa MK4S with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/high-speed-petg
- Prusa MK4S with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/high-speed-pla
- Prusa MK4S with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/high-speed-tpu
- Prusa MK4S with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/luminous-high-speed-glow-tpu
- Prusa MK4S with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/matte-pla
- Prusa MK4S with Overture PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pc
- Prusa MK4S with Overture PC Professional: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pc-professional
- Prusa MK4S with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/petg
- Prusa MK4S with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/petg-basic
- Prusa MK4S with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/petg-refill
- Prusa MK4S with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla
- Prusa MK4S with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-air
- Prusa MK4S with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-cf
- Prusa MK4S with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-cream
- Prusa MK4S with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-easy
- Prusa MK4S with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-easy-glow
- Prusa MK4S with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-plus
- Prusa MK4S with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-professional
- Prusa MK4S with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-refill
- Prusa MK4S with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-rock
- Prusa MK4S with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-super
- Prusa MK4S with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/pla-turbo-rapid
- Prusa MK4S with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/shimmer-pla
- Prusa MK4S with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/silk-pla
- Prusa MK4S with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/overture/tpu
- Prusa MK4S with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/abs
- Prusa MK4S with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/asa
- Prusa MK4S with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/cpe
- Prusa MK4S with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/creator-special-edition-pla
- Prusa MK4S with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/draft-pla
- Prusa MK4S with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/dual-panchroma-matte-pla
- Prusa MK4S with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/for-production-matte-pla
- Prusa MK4S with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/glow-pla
- Prusa MK4S with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/gradient-panchroma-pla
- Prusa MK4S with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/ht-pla-pro
- Prusa MK4S with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/ht-pla
- Prusa MK4S with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/ht-pla-gf
- Prusa MK4S with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/lw-polylite-pla
- Prusa MK4S with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/metallic-polylite-pla
- Prusa MK4S with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/metallic-polylite-silk-abs
- Prusa MK4S with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/metallic-polylite-silk-pla
- Prusa MK4S with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/muted-panchroma-matte-pla
- Prusa MK4S with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/neon-panchroma-pla
- Prusa MK4S with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pa12-cf
- Prusa MK4S with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pa6-cf
- Prusa MK4S with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pa6-gf
- Prusa MK4S with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/panchroma-cope
- Prusa MK4S with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/panchroma-glow-pla
- Prusa MK4S with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/panchroma-pla
- Prusa MK4S with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/panchroma-silk-pla
- Prusa MK4S with Polymaker PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pc
- Prusa MK4S with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 105 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pc-abs
- Prusa MK4S with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pc-pbt
- Prusa MK4S with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pet-cf
- Prusa MK4S with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/petg
- Prusa MK4S with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/petg-cf
- Prusa MK4S with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pla
- Prusa MK4S with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pla-cf
- Prusa MK4S with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pla-polycast
- Prusa MK4S with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polyflex-95-hf-high-speed-tpu
- Prusa MK4S with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polyflex-tpu
- Prusa MK4S with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polylite-abs
- Prusa MK4S with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polylite-asa
- Prusa MK4S with Polymaker Polylite PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polylite-pc
- Prusa MK4S with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polylite-petg
- Prusa MK4S with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polylite-pla
- Prusa MK4S with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polylite-pla-cf
- Prusa MK4S with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polymaker-pla-pro
- Prusa MK4S with Polymaker Polymax PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polymax-pc
- Prusa MK4S with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polymax-petg
- Prusa MK4S with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polymax-pla
- Prusa MK4S with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polymide-copa-pa6
- Prusa MK4S with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polysmooth
- Prusa MK4S with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polysonic-pla
- Prusa MK4S with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/polysupport-for-pla
- Prusa MK4S with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pps-cf
- Prusa MK4S with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pva
- Prusa MK4S with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pva-polydissolve-s1
- Prusa MK4S with Polymaker PVA PolySupport for PA12: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pva-polysupport-for-pa12
- Prusa MK4S with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/pvb
- Prusa MK4S with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/satin-panchroma-pla
- Prusa MK4S with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/silk-abs
- Prusa MK4S with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/silk-pla
- Prusa MK4S with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/polymaker/wood-pla
- Prusa MK4S with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/basic-pla
- Prusa MK4S with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/conductive-pla
- Prusa MK4S with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/fiber-ht-matte-pla
- Prusa MK4S with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/fluorescent-pla
- Prusa MK4S with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/glitter-petg
- Prusa MK4S with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/glitter-pla
- Prusa MK4S with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/glow-pla
- Prusa MK4S with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/high-speed-pla
- Prusa MK4S with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/iron-metal-composite-pla
- Prusa MK4S with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/marble-pla
- Prusa MK4S with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/matte-pla
- Prusa MK4S with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/metal-composite-pla
- Prusa MK4S with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/metallic-petg
- Prusa MK4S with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/metallic-pla
- Prusa MK4S with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/multicolor-pla
- Prusa MK4S with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/nebula-pla
- Prusa MK4S with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/opaque-pla
- Prusa MK4S with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/pearl-pla
- Prusa MK4S with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/petg
- Prusa MK4S with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/protopasta/petg-cf
- Prusa MK4S with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/pla
- Prusa MK4S with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/protopasta/pla-cf
- Prusa MK4S with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/pla-green-glow-in-the-dark
- Prusa MK4S with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/recycled-petg
- Prusa MK4S with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/recycled-pla
- Prusa MK4S with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/satin-pla
- Prusa MK4S with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/silk-petg
- Prusa MK4S with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/silk-pla
- Prusa MK4S with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/simply-petg
- Prusa MK4S with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/stainless-steel-metal-composite-pla
- Prusa MK4S with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/protopasta/static-dissipative-carbon-fiber-pla
- Prusa MK4S with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/static-dissipative-petg
- Prusa MK4S with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/static-dissipative-pla
- Prusa MK4S with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/steel-metal-composite-pla
- Prusa MK4S with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/still-colorful-recycled-pla
- Prusa MK4S with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/thermochromic-pla
- Prusa MK4S with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/tpe
- Prusa MK4S with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/tpu
- Prusa MK4S with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/translucent-petg
- Prusa MK4S with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/protopasta/translucent-pla
- Prusa MK4S with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/asa
- Prusa MK4S with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/blend-silk-pla
- Prusa MK4S with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/matte-petg
- Prusa MK4S with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/mystic-premium-pla
- Prusa MK4S with Prusament PA11-CF: The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. The listed bed maximum of 115 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/prusament/pa11-cf
- Prusa MK4S with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pc
- Prusa MK4S with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pc-blend
- Prusa MK4S with Prusament PC-CF: The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/prusament/pc-cf
- Prusa MK4S with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 290 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pei
- Prusa MK4S with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pei-1010
- Prusa MK4S with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/petg
- Prusa MK4S with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/prusament/petg-cf
- Prusa MK4S with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/petg-magnetite
- Prusa MK4S with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/petg-tungsten
- Prusa MK4S with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/petg-v0
- Prusa MK4S with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pla
- Prusa MK4S with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pla-recycled
- Prusa MK4S with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pla-woodfill
- Prusa MK4S with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 85 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/prusament/pp-cf
- Prusa MK4S with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/prusament/pp-gf
- Prusa MK4S with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/pvb
- Prusa MK4S with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/rpla
- Prusa MK4S with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/prusament/tpu-95a
- Prusa MK4S with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-abs-ht-hf
- Prusa MK4S with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-abs-cf-core
- Prusa MK4S with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-abs-gf
- Prusa MK4S with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-asa-gf
- Prusa MK4S with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-pet-cf
- Prusa MK4S with Siraya Tech Fibreheart PET-GF: The listed nozzle temperature starts at 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-pet-gf
- Prusa MK4S with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-petg-cf-pro
- Prusa MK4S with Siraya Tech Fibreheart PPA: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-ppa
- Prusa MK4S with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-ppa-cf
- Prusa MK4S with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-ppa-cf-core
- Prusa MK4S with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/fibreheart-tpu-gf
- Prusa MK4S with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 45 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/flex-tpu-64d
- Prusa MK4S with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/flex-tpu-85a
- Prusa MK4S with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/flex-tpu-air-85a
- Prusa MK4S with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/rebound-peba-85a
- Prusa MK4S with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/rebound-peba-95a
- Prusa MK4S with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/rebound-peba-air-95a
- Prusa MK4S with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/roamr-tpu-air-hr-80a
- Prusa MK4S with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/siraya-tech/roamr-tpu-air-hr-85a
- Prusa MK4S with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/95a-high-speed-tpu
- Prusa MK4S with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/abs
- Prusa MK4S with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/abs-fr
- Prusa MK4S with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/apla
- Prusa MK4S with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/asa
- Prusa MK4S with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/fluorescent-pla
- Prusa MK4S with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/glow-petg
- Prusa MK4S with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/glow-pla
- Prusa MK4S with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/high-speed-abs
- Prusa MK4S with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/high-speed-matte-petg
- Prusa MK4S with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/high-speed-matte-pla
- Prusa MK4S with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/high-speed-petg
- Prusa MK4S with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/high-speed-pla
- Prusa MK4S with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/high-speed-pla-marble
- Prusa MK4S with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/high-speed-pla-plus
- Prusa MK4S with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/luminous-glow-in-the-dark-petg
- Prusa MK4S with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/sunlu/matte-petg-cf
- Prusa MK4S with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pa12-cf
- Prusa MK4S with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pa6-easy-pa
- Prusa MK4S with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pa6-cf
- Prusa MK4S with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pa6-gf
- Prusa MK4S with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pc
- Prusa MK4S with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pc-abs
- Prusa MK4S with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pcl
- Prusa MK4S with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/peek
- Prusa MK4S with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/petg
- Prusa MK4S with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/petg-2-0
- Prusa MK4S with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/sunlu/petg-carbon-fiber
- Prusa MK4S with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/petg-glow-in-the-dark-filament
- Prusa MK4S with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla
- Prusa MK4S with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-carbon-fiber
- Prusa MK4S with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-cf
- Prusa MK4S with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-classic
- Prusa MK4S with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-galaxy
- Prusa MK4S with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-glow-in-the-dark
- Prusa MK4S with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-matte
- Prusa MK4S with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-matte-dual-color
- Prusa MK4S with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-rainbow
- Prusa MK4S with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-silk
- Prusa MK4S with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-transparent-rainbow
- Prusa MK4S with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-twinkling
- Prusa MK4S with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-wood
- Prusa MK4S with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-meta
- Prusa MK4S with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-plus
- Prusa MK4S with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pla-plus-2-0
- Prusa MK4S with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pp
- Prusa MK4S with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pva
- Prusa MK4S with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/pvb
- Prusa MK4S with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/real-wood-fiber-pla
- Prusa MK4S with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/silk-2-0
- Prusa MK4S with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/silk-pla-plus
- Prusa MK4S with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/silk-pla-plus-dual-color
- Prusa MK4S with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/silk-pla-plus-four-color
- Prusa MK4S with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/silk-pla-plus-rainbow
- Prusa MK4S with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/silk-pla-plus-tri-color
- Prusa MK4S with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/temperature-color-change-pla
- Prusa MK4S with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/tpu
- Prusa MK4S with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/tpu-silk
- Prusa MK4S with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/tpu90a
- Prusa MK4S with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/tpu95a
- Prusa MK4S with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/transparent-clear-pla
- Prusa MK4S with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-mk4s/sunlu/upgrade-pla
- Prusa CORE One+ with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/90a-flexible-peba
- Prusa CORE One+ with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/basic-matte-pla
- Prusa CORE One+ with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/basic-silk-pla
- Prusa CORE One+ with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/conductive-pla
- Prusa CORE One+ with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/crystal-transparent-pla
- Prusa CORE One+ with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/dual-color-matte-pla
- Prusa CORE One+ with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/dual-color-silk-pla
- Prusa CORE One+ with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Prusa CORE One+ with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/glow-pla
- Prusa CORE One+ with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/glow-tpu
- Prusa CORE One+ with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/high-speed-pla
- Prusa CORE One+ with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/marble-pla
- Prusa CORE One+ with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/matte-pla
- Prusa CORE One+ with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/peba
- Prusa CORE One+ with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/petg
- Prusa CORE One+ with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/pla
- Prusa CORE One+ with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/pla-cf
- Prusa CORE One+ with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/pla-metal
- Prusa CORE One+ with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/quad-color-silk-pla
- Prusa CORE One+ with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/rainbow-silk-pla
- Prusa CORE One+ with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/s-series-silk-pla
- Prusa CORE One+ with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/shiny-glitter-silk-pla
- Prusa CORE One+ with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/shiny-gradient-silk-pla
- Prusa CORE One+ with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/silk-gf-pla
- Prusa CORE One+ with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/silk-pla
- Prusa CORE One+ with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/temperature-color-change-pla
- Prusa CORE One+ with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/tpu
- Prusa CORE One+ with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/transparent-pla
- Prusa CORE One+ with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/triple-color-matte-pla
- Prusa CORE One+ with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/triple-color-silk-pla
- Prusa CORE One+ with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/uv-color-change-pla
- Prusa CORE One+ with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/amolen/wood-pla
- Prusa CORE One+ with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/abs
- Prusa CORE One+ with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/asa
- Prusa CORE One+ with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/high-speed-pla
- Prusa CORE One+ with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/petg
- Prusa CORE One+ with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-basic
- Prusa CORE One+ with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-galaxy
- Prusa CORE One+ with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-marble
- Prusa CORE One+ with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-matte
- Prusa CORE One+ with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-metal
- Prusa CORE One+ with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-plus
- Prusa CORE One+ with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-silk
- Prusa CORE One+ with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-silk-dual-tricolor
- Prusa CORE One+ with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/pla-special
- Prusa CORE One+ with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/tpu
- Prusa CORE One+ with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/anycubic/translucent-petg
- Prusa CORE One+ with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/abs
- Prusa CORE One+ with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/abs-gf
- Prusa CORE One+ with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/asa
- Prusa CORE One+ with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/asa-aero
- Prusa CORE One+ with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/asa-cf
- Prusa CORE One+ with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/matte-asa-cf
- Prusa CORE One+ with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pa12-cf
- Prusa CORE One+ with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pa6-cf
- Prusa CORE One+ with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pa6-gf
- Prusa CORE One+ with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/paht-cf
- Prusa CORE One+ with Bambu Lab PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pc
- Prusa CORE One+ with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pc-fr
- Prusa CORE One+ with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pet-cf
- Prusa CORE One+ with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/petg-basic
- Prusa CORE One+ with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/petg-hf
- Prusa CORE One+ with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/petg-matte
- Prusa CORE One+ with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/petg-translucent
- Prusa CORE One+ with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/petg-cf
- Prusa CORE One+ with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla
- Prusa CORE One+ with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-aero
- Prusa CORE One+ with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 45 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-basic
- Prusa CORE One+ with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-basic-gradient
- Prusa CORE One+ with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-galaxy
- Prusa CORE One+ with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-glow
- Prusa CORE One+ with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-lite
- Prusa CORE One+ with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-marble
- Prusa CORE One+ with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-matte
- Prusa CORE One+ with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-metal
- Prusa CORE One+ with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-pure
- Prusa CORE One+ with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-silk-dual-color
- Prusa CORE One+ with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-silk-multi-color
- Prusa CORE One+ with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-silk-plus
- Prusa CORE One+ with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-sparkle
- Prusa CORE One+ with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-tough-plus
- Prusa CORE One+ with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-translucent
- Prusa CORE One+ with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-wood
- Prusa CORE One+ with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pla-cf
- Prusa CORE One+ with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/ppa-cf
- Prusa CORE One+ with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pps-cf
- Prusa CORE One+ with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/pva
- Prusa CORE One+ with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/silk-pla
- Prusa CORE One+ with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/support-for-abs
- Prusa CORE One+ with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/support-for-pa-pet
- Prusa CORE One+ with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/support-for-pla
- Prusa CORE One+ with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/support-for-pla-petg
- Prusa CORE One+ with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/tpu
- Prusa CORE One+ with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 35 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/tpu-85a
- Prusa CORE One+ with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 35 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/tpu-90a
- Prusa CORE One+ with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/tpu-95a-hf
- Prusa CORE One+ with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/bambu-lab/tpu-for-ams
- Prusa CORE One+ with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/asa
- Prusa CORE One+ with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/cpe
- Prusa CORE One+ with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/economy-pla
- Prusa CORE One+ with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/glow-pha
- Prusa CORE One+ with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/high-speed-pla
- Prusa CORE One+ with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/lw-ht-pla
- Prusa CORE One+ with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/matte-pla
- Prusa CORE One+ with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/petg
- Prusa CORE One+ with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/pha
- Prusa CORE One+ with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/pha-pla
- Prusa CORE One+ with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/pla
- Prusa CORE One+ with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/r-semi-pla
- Prusa CORE One+ with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/semi-pla
- Prusa CORE One+ with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/silk-pla
- Prusa CORE One+ with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/stonefill-pla
- Prusa CORE One+ with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/colorfabb/tpu
- Prusa CORE One+ with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/95a-tpu
- Prusa CORE One+ with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/abs
- Prusa CORE One+ with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/cr-petg
- Prusa CORE One+ with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/cr-pla-carbon
- Prusa CORE One+ with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/ender-fast-pla
- Prusa CORE One+ with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/ender-pla-plus
- Prusa CORE One+ with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hp-asa
- Prusa CORE One+ with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hp-tpu
- Prusa CORE One+ with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-abs
- Prusa CORE One+ with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-luminous-pla
- Prusa CORE One+ with Creality Hyper PA6-CF: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-pa6-cf
- Prusa CORE One+ with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-pc
- Prusa CORE One+ with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-petg
- Prusa CORE One+ with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-pla
- Prusa CORE One+ with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-pla-cf
- Prusa CORE One+ with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/hyper-rainbow-pla
- Prusa CORE One+ with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/petg
- Prusa CORE One+ with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/pla
- Prusa CORE One+ with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/creality/pla-cf
- Prusa CORE One+ with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/pla-cr-wood
- Prusa CORE One+ with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/creality/ppa-cf
- Prusa CORE One+ with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/silk-pla
- Prusa CORE One+ with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/soleyin-basic-petg
- Prusa CORE One+ with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/creality/soleyin-ultra-pla
- Prusa CORE One+ with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/abs
- Prusa CORE One+ with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/asa
- Prusa CORE One+ with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/galaxy-pla
- Prusa CORE One+ with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/paht-cf
- Prusa CORE One+ with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pc
- Prusa CORE One+ with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pc-fr
- Prusa CORE One+ with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pet-cf
- Prusa CORE One+ with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/petg
- Prusa CORE One+ with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/petg-pro
- Prusa CORE One+ with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/petg-translucent
- Prusa CORE One+ with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/petg-cf
- Prusa CORE One+ with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/petg-gf
- Prusa CORE One+ with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla
- Prusa CORE One+ with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-basic
- Prusa CORE One+ with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-glow
- Prusa CORE One+ with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-marble
- Prusa CORE One+ with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-matte
- Prusa CORE One+ with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-metallic
- Prusa CORE One+ with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-plus
- Prusa CORE One+ with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-pro
- Prusa CORE One+ with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-sparkle
- Prusa CORE One+ with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-wood
- Prusa CORE One+ with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/pla-cf
- Prusa CORE One+ with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/rapid-petg
- Prusa CORE One+ with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/rapid-pla-plus
- Prusa CORE One+ with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/rapid-tpu-95a
- Prusa CORE One+ with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/silk-pla
- Prusa CORE One+ with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/elegoo/tpu-95a
- Prusa CORE One+ with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/abs
- Prusa CORE One+ with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/abs-high-speed
- Prusa CORE One+ with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/abs-cf
- Prusa CORE One+ with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/abs-gf
- Prusa CORE One+ with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/abs-pc
- Prusa CORE One+ with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/abs-plus
- Prusa CORE One+ with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/asa
- Prusa CORE One+ with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/asa-high-speed
- Prusa CORE One+ with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/asa-light-weight
- Prusa CORE One+ with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/asa-cf
- Prusa CORE One+ with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/asa-gf
- Prusa CORE One+ with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pa12-nylon
- Prusa CORE One+ with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pa12-cf
- Prusa CORE One+ with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pa12-gf
- Prusa CORE One+ with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pa6-cf
- Prusa CORE One+ with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pa6-gf
- Prusa CORE One+ with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/petg
- Prusa CORE One+ with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/petg-cf
- Prusa CORE One+ with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla
- Prusa CORE One+ with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-burnt-titanium
- Prusa CORE One+ with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-burnt-titanium-dual-color
- Prusa CORE One+ with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-burnt-titanium-rainbow
- Prusa CORE One+ with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-burnt-titanium-triple-color
- Prusa CORE One+ with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-galaxy
- Prusa CORE One+ with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-high-speed
- Prusa CORE One+ with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-light-weight
- Prusa CORE One+ with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-luminous
- Prusa CORE One+ with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-marble
- Prusa CORE One+ with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte
- Prusa CORE One+ with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte-dual-color
- Prusa CORE One+ with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte-gradient
- Prusa CORE One+ with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte-high-speed
- Prusa CORE One+ with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte-high-speed-gradient-multi-color
- Prusa CORE One+ with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte-high-speed-rock-rainbow
- Prusa CORE One+ with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte-high-speed-triple-color
- Prusa CORE One+ with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-matte-rainbow
- Prusa CORE One+ with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-metallic
- Prusa CORE One+ with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-rainbow
- Prusa CORE One+ with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-silk
- Prusa CORE One+ with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-silk-high-speed-dual-color
- Prusa CORE One+ with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-silk-high-speed-quadruple
- Prusa CORE One+ with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-silk-high-speed-triple-color
- Prusa CORE One+ with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-silk-rainbow
- Prusa CORE One+ with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-ultra-silk
- Prusa CORE One+ with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-wood
- Prusa CORE One+ with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-cf
- Prusa CORE One+ with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-plus
- Prusa CORE One+ with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pla-plus-high-speed
- Prusa CORE One+ with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pp
- Prusa CORE One+ with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/pp-cf
- Prusa CORE One+ with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/tpu
- Prusa CORE One+ with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/tpu-90a
- Prusa CORE One+ with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/tpu-high-speed
- Prusa CORE One+ with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/eryone/tpu-rainbow
- Prusa CORE One+ with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/abs-plus
- Prusa CORE One+ with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/abs-pluscf
- Prusa CORE One+ with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/abs-plushs
- Prusa CORE One+ with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/asa-plus
- Prusa CORE One+ with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/dark-twinkling-pla-magic
- Prusa CORE One+ with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/epaht-cf
- Prusa CORE One+ with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/epla-plushs
- Prusa CORE One+ with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/esun-petg-matte
- Prusa CORE One+ with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/mystic-silk-pla
- Prusa CORE One+ with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pa12-cf
- Prusa CORE One+ with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pa6-pa
- Prusa CORE One+ with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pa6-pa-cf
- Prusa CORE One+ with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/peak-pla
- Prusa CORE One+ with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pet
- Prusa CORE One+ with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/petg
- Prusa CORE One+ with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/petg-basic
- Prusa CORE One+ with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/petg-matte
- Prusa CORE One+ with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/petg-pluscf
- Prusa CORE One+ with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/petg-plushs
- Prusa CORE One+ with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-basic
- Prusa CORE One+ with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-cf
- Prusa CORE One+ with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-chameleon
- Prusa CORE One+ with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-hs
- Prusa CORE One+ with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-lite
- Prusa CORE One+ with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-luminous
- Prusa CORE One+ with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-luminous-rainbow
- Prusa CORE One+ with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-lw
- Prusa CORE One+ with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-marble
- Prusa CORE One+ with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-matte
- Prusa CORE One+ with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-metal
- Prusa CORE One+ with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-silk
- Prusa CORE One+ with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-silk-candy
- Prusa CORE One+ with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-silk-magic
- Prusa CORE One+ with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-silk-metal
- Prusa CORE One+ with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-silk-rainbow
- Prusa CORE One+ with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-st
- Prusa CORE One+ with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-stars
- Prusa CORE One+ with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-wood
- Prusa CORE One+ with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-plus
- Prusa CORE One+ with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pla-plus-cmyk
- Prusa CORE One+ with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/pva
- Prusa CORE One+ with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/silk-petg
- Prusa CORE One+ with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/tpe-83a
- Prusa CORE One+ with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/tpu-95a
- Prusa CORE One+ with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/tpu-lw
- Prusa CORE One+ with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/esun-3d/uv-change-pla-uv-color-change
- Prusa CORE One+ with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/basic-pla
- Prusa CORE One+ with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/biofusion-pla
- Prusa CORE One+ with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/biofusion-silk-pla
- Prusa CORE One+ with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/durapro-abs
- Prusa CORE One+ with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/durapro-asa
- Prusa CORE One+ with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/durapro-cf-pa12
- Prusa CORE One+ with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/durapro-matte-asa
- Prusa CORE One+ with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/durapro-pa12
- Prusa CORE One+ with extrudr DuraPro PBT PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/durapro-pbt-pc
- Prusa CORE One+ with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/flax-pla
- Prusa CORE One+ with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/flex-hard-cf-tpu
- Prusa CORE One+ with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/flex-hard-tpu
- Prusa CORE One+ with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/flex-medium-tpu
- Prusa CORE One+ with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/flex-semisoft-tpu
- Prusa CORE One+ with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/glow-petg
- Prusa CORE One+ with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/greentec-matte-pla
- Prusa CORE One+ with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/greentec-pla
- Prusa CORE One+ with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/pctg
- Prusa CORE One+ with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/pearl-pla
- Prusa CORE One+ with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/petg
- Prusa CORE One+ with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/pla-nx2-matt
- Prusa CORE One+ with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/extrudr/wood-pla
- Prusa CORE One+ with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 290 °C. The listed bed maximum of 105 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/fillamentum/asa-extrafill
- Prusa CORE One+ with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/fillamentum/cpe-hg100
- Prusa CORE One+ with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 55 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/fillamentum/pla-crystal-clear
- Prusa CORE One+ with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/fillamentum/pla-extrafill
- Prusa CORE One+ with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/abs
- Prusa CORE One+ with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/glow-abs
- Prusa CORE One+ with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/glow-pla
- Prusa CORE One+ with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/metallic-finish-pla
- Prusa CORE One+ with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/petg
- Prusa CORE One+ with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/pla
- Prusa CORE One+ with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/pla-basic
- Prusa CORE One+ with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/pla-cf
- Prusa CORE One+ with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/pla-matte
- Prusa CORE One+ with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/pla-max
- Prusa CORE One+ with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/pla-metal
- Prusa CORE One+ with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/pla-pro
- Prusa CORE One+ with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/silk-pla
- Prusa CORE One+ with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/tpu
- Prusa CORE One+ with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/transparent-pla
- Prusa CORE One+ with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/uv-color-changing-pla
- Prusa CORE One+ with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/hatchbox/wood-pla
- Prusa CORE One+ with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/abs
- Prusa CORE One+ with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/carbon-fiber-nylon
- Prusa CORE One+ with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/galaxy-pla
- Prusa CORE One+ with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/glow-abs
- Prusa CORE One+ with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/high-speed-pla-plus
- Prusa CORE One+ with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/petg-plus
- Prusa CORE One+ with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla
- Prusa CORE One+ with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla-basic
- Prusa CORE One+ with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla-chameleon
- Prusa CORE One+ with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla-glitter-rainbow
- Prusa CORE One+ with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla-matte
- Prusa CORE One+ with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla-mystic-silk
- Prusa CORE One+ with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla-silk-rainbow
- Prusa CORE One+ with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/pla-plus
- Prusa CORE One+ with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/silk-pla
- Prusa CORE One+ with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/inland/tpu
- Prusa CORE One+ with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/jayo/high-speed-matte-pla
- Prusa CORE One+ with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/jayo/matte-pla
- Prusa CORE One+ with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/jayo/petg
- Prusa CORE One+ with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/jayo/pla
- Prusa CORE One+ with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/jayo/pla-plus
- Prusa CORE One+ with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/jayo/silk-pla
- Prusa CORE One+ with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/jayo/tpu
- Prusa CORE One+ with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/abs
- Prusa CORE One+ with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/glow-pla
- Prusa CORE One+ with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/high-speed-petg
- Prusa CORE One+ with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/high-speed-pla
- Prusa CORE One+ with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/matte-pla
- Prusa CORE One+ with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/petg
- Prusa CORE One+ with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/petg-cf
- Prusa CORE One+ with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/pla
- Prusa CORE One+ with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/pla-basic
- Prusa CORE One+ with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/pla-cf
- Prusa CORE One+ with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/silk-pla
- Prusa CORE One+ with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/kingroon/tpu
- Prusa CORE One+ with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/abs
- Prusa CORE One+ with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/abs-basic
- Prusa CORE One+ with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/asa
- Prusa CORE One+ with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/asa-basic
- Prusa CORE One+ with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/easy-nylon
- Prusa CORE One+ with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/glow-abs
- Prusa CORE One+ with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/glow-pla
- Prusa CORE One+ with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/high-speed-petg
- Prusa CORE One+ with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/high-speed-pla
- Prusa CORE One+ with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/high-speed-tpu
- Prusa CORE One+ with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/luminous-high-speed-glow-tpu
- Prusa CORE One+ with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/matte-pla
- Prusa CORE One+ with Overture PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pc
- Prusa CORE One+ with Overture PC Professional: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pc-professional
- Prusa CORE One+ with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/petg
- Prusa CORE One+ with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/petg-basic
- Prusa CORE One+ with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/petg-refill
- Prusa CORE One+ with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla
- Prusa CORE One+ with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-air
- Prusa CORE One+ with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-cf
- Prusa CORE One+ with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-cream
- Prusa CORE One+ with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-easy
- Prusa CORE One+ with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-easy-glow
- Prusa CORE One+ with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-plus
- Prusa CORE One+ with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-professional
- Prusa CORE One+ with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-refill
- Prusa CORE One+ with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-rock
- Prusa CORE One+ with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-super
- Prusa CORE One+ with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/pla-turbo-rapid
- Prusa CORE One+ with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/shimmer-pla
- Prusa CORE One+ with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/silk-pla
- Prusa CORE One+ with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/overture/tpu
- Prusa CORE One+ with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/abs
- Prusa CORE One+ with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/asa
- Prusa CORE One+ with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/cpe
- Prusa CORE One+ with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/creator-special-edition-pla
- Prusa CORE One+ with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/draft-pla
- Prusa CORE One+ with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/dual-panchroma-matte-pla
- Prusa CORE One+ with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/for-production-matte-pla
- Prusa CORE One+ with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/glow-pla
- Prusa CORE One+ with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/gradient-panchroma-pla
- Prusa CORE One+ with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/ht-pla-pro
- Prusa CORE One+ with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/ht-pla
- Prusa CORE One+ with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/ht-pla-gf
- Prusa CORE One+ with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/lw-polylite-pla
- Prusa CORE One+ with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/metallic-polylite-pla
- Prusa CORE One+ with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/metallic-polylite-silk-abs
- Prusa CORE One+ with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/metallic-polylite-silk-pla
- Prusa CORE One+ with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/muted-panchroma-matte-pla
- Prusa CORE One+ with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/neon-panchroma-pla
- Prusa CORE One+ with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pa12-cf
- Prusa CORE One+ with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pa6-cf
- Prusa CORE One+ with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pa6-gf
- Prusa CORE One+ with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/panchroma-cope
- Prusa CORE One+ with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/panchroma-glow-pla
- Prusa CORE One+ with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/panchroma-pla
- Prusa CORE One+ with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/panchroma-silk-pla
- Prusa CORE One+ with Polymaker PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pc
- Prusa CORE One+ with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 105 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pc-abs
- Prusa CORE One+ with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pc-pbt
- Prusa CORE One+ with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pet-cf
- Prusa CORE One+ with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/petg
- Prusa CORE One+ with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/petg-cf
- Prusa CORE One+ with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pla
- Prusa CORE One+ with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pla-cf
- Prusa CORE One+ with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pla-polycast
- Prusa CORE One+ with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polyflex-95-hf-high-speed-tpu
- Prusa CORE One+ with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polyflex-tpu
- Prusa CORE One+ with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polylite-abs
- Prusa CORE One+ with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polylite-asa
- Prusa CORE One+ with Polymaker Polylite PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polylite-pc
- Prusa CORE One+ with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polylite-petg
- Prusa CORE One+ with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polylite-pla
- Prusa CORE One+ with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polylite-pla-cf
- Prusa CORE One+ with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polymaker-pla-pro
- Prusa CORE One+ with Polymaker Polymax PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polymax-pc
- Prusa CORE One+ with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polymax-petg
- Prusa CORE One+ with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polymax-pla
- Prusa CORE One+ with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polymide-copa-pa6
- Prusa CORE One+ with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polysmooth
- Prusa CORE One+ with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polysonic-pla
- Prusa CORE One+ with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/polysupport-for-pla
- Prusa CORE One+ with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pps-cf
- Prusa CORE One+ with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pva
- Prusa CORE One+ with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pva-polydissolve-s1
- Prusa CORE One+ with Polymaker PVA PolySupport for PA12: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pva-polysupport-for-pa12
- Prusa CORE One+ with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/pvb
- Prusa CORE One+ with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/satin-panchroma-pla
- Prusa CORE One+ with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/silk-abs
- Prusa CORE One+ with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/silk-pla
- Prusa CORE One+ with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/polymaker/wood-pla
- Prusa CORE One+ with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/basic-pla
- Prusa CORE One+ with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/conductive-pla
- Prusa CORE One+ with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/fiber-ht-matte-pla
- Prusa CORE One+ with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/fluorescent-pla
- Prusa CORE One+ with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/glitter-petg
- Prusa CORE One+ with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/glitter-pla
- Prusa CORE One+ with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/glow-pla
- Prusa CORE One+ with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/high-speed-pla
- Prusa CORE One+ with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/iron-metal-composite-pla
- Prusa CORE One+ with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/marble-pla
- Prusa CORE One+ with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/matte-pla
- Prusa CORE One+ with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/metal-composite-pla
- Prusa CORE One+ with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/metallic-petg
- Prusa CORE One+ with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/metallic-pla
- Prusa CORE One+ with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/multicolor-pla
- Prusa CORE One+ with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/nebula-pla
- Prusa CORE One+ with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/opaque-pla
- Prusa CORE One+ with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/pearl-pla
- Prusa CORE One+ with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/petg
- Prusa CORE One+ with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/petg-cf
- Prusa CORE One+ with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/pla
- Prusa CORE One+ with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/pla-cf
- Prusa CORE One+ with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/pla-green-glow-in-the-dark
- Prusa CORE One+ with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/recycled-petg
- Prusa CORE One+ with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/recycled-pla
- Prusa CORE One+ with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/satin-pla
- Prusa CORE One+ with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/silk-petg
- Prusa CORE One+ with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/silk-pla
- Prusa CORE One+ with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/simply-petg
- Prusa CORE One+ with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/stainless-steel-metal-composite-pla
- Prusa CORE One+ with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/static-dissipative-carbon-fiber-pla
- Prusa CORE One+ with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/static-dissipative-petg
- Prusa CORE One+ with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/static-dissipative-pla
- Prusa CORE One+ with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/steel-metal-composite-pla
- Prusa CORE One+ with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/still-colorful-recycled-pla
- Prusa CORE One+ with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/thermochromic-pla
- Prusa CORE One+ with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/tpe
- Prusa CORE One+ with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/tpu
- Prusa CORE One+ with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/translucent-petg
- Prusa CORE One+ with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/protopasta/translucent-pla
- Prusa CORE One+ with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/asa
- Prusa CORE One+ with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/blend-silk-pla
- Prusa CORE One+ with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/matte-petg
- Prusa CORE One+ with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/mystic-premium-pla
- Prusa CORE One+ with Prusament PA11-CF: The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. The listed bed maximum of 115 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pa11-cf
- Prusa CORE One+ with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pc
- Prusa CORE One+ with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pc-blend
- Prusa CORE One+ with Prusament PC-CF: The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pc-cf
- Prusa CORE One+ with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 290 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pei
- Prusa CORE One+ with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pei-1010
- Prusa CORE One+ with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/petg
- Prusa CORE One+ with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/petg-cf
- Prusa CORE One+ with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/petg-magnetite
- Prusa CORE One+ with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/petg-tungsten
- Prusa CORE One+ with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/petg-v0
- Prusa CORE One+ with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pla
- Prusa CORE One+ with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pla-recycled
- Prusa CORE One+ with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pla-woodfill
- Prusa CORE One+ with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 85 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pp-cf
- Prusa CORE One+ with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pp-gf
- Prusa CORE One+ with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/pvb
- Prusa CORE One+ with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/rpla
- Prusa CORE One+ with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/prusament/tpu-95a
- Prusa CORE One+ with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-abs-ht-hf
- Prusa CORE One+ with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-abs-cf-core
- Prusa CORE One+ with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-abs-gf
- Prusa CORE One+ with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-asa-gf
- Prusa CORE One+ with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-pet-cf
- Prusa CORE One+ with Siraya Tech Fibreheart PET-GF: The listed nozzle temperature starts at 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-pet-gf
- Prusa CORE One+ with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-petg-cf-pro
- Prusa CORE One+ with Siraya Tech Fibreheart PPA: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-ppa
- Prusa CORE One+ with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-ppa-cf
- Prusa CORE One+ with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-ppa-cf-core
- Prusa CORE One+ with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/fibreheart-tpu-gf
- Prusa CORE One+ with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 45 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/flex-tpu-64d
- Prusa CORE One+ with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/flex-tpu-85a
- Prusa CORE One+ with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/flex-tpu-air-85a
- Prusa CORE One+ with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/rebound-peba-85a
- Prusa CORE One+ with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/rebound-peba-95a
- Prusa CORE One+ with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/rebound-peba-air-95a
- Prusa CORE One+ with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/roamr-tpu-air-hr-80a
- Prusa CORE One+ with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/siraya-tech/roamr-tpu-air-hr-85a
- Prusa CORE One+ with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/95a-high-speed-tpu
- Prusa CORE One+ with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/abs
- Prusa CORE One+ with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/abs-fr
- Prusa CORE One+ with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/apla
- Prusa CORE One+ with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/asa
- Prusa CORE One+ with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/fluorescent-pla
- Prusa CORE One+ with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/glow-petg
- Prusa CORE One+ with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/glow-pla
- Prusa CORE One+ with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/high-speed-abs
- Prusa CORE One+ with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/high-speed-matte-petg
- Prusa CORE One+ with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/high-speed-matte-pla
- Prusa CORE One+ with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/high-speed-petg
- Prusa CORE One+ with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/high-speed-pla
- Prusa CORE One+ with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/high-speed-pla-marble
- Prusa CORE One+ with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/high-speed-pla-plus
- Prusa CORE One+ with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/luminous-glow-in-the-dark-petg
- Prusa CORE One+ with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/matte-petg-cf
- Prusa CORE One+ with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pa12-cf
- Prusa CORE One+ with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pa6-easy-pa
- Prusa CORE One+ with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pa6-cf
- Prusa CORE One+ with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pa6-gf
- Prusa CORE One+ with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pc
- Prusa CORE One+ with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pc-abs
- Prusa CORE One+ with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pcl
- Prusa CORE One+ with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/peek
- Prusa CORE One+ with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/petg
- Prusa CORE One+ with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/petg-2-0
- Prusa CORE One+ with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/petg-carbon-fiber
- Prusa CORE One+ with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/petg-glow-in-the-dark-filament
- Prusa CORE One+ with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla
- Prusa CORE One+ with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-carbon-fiber
- Prusa CORE One+ with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-cf
- Prusa CORE One+ with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-classic
- Prusa CORE One+ with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-galaxy
- Prusa CORE One+ with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-glow-in-the-dark
- Prusa CORE One+ with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-matte
- Prusa CORE One+ with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-matte-dual-color
- Prusa CORE One+ with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-rainbow
- Prusa CORE One+ with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-silk
- Prusa CORE One+ with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-transparent-rainbow
- Prusa CORE One+ with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-twinkling
- Prusa CORE One+ with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-wood
- Prusa CORE One+ with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-meta
- Prusa CORE One+ with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-plus
- Prusa CORE One+ with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pla-plus-2-0
- Prusa CORE One+ with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pp
- Prusa CORE One+ with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pva
- Prusa CORE One+ with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/pvb
- Prusa CORE One+ with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/real-wood-fiber-pla
- Prusa CORE One+ with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/silk-2-0
- Prusa CORE One+ with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/silk-pla-plus
- Prusa CORE One+ with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/silk-pla-plus-dual-color
- Prusa CORE One+ with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/silk-pla-plus-four-color
- Prusa CORE One+ with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/silk-pla-plus-rainbow
- Prusa CORE One+ with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/silk-pla-plus-tri-color
- Prusa CORE One+ with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/temperature-color-change-pla
- Prusa CORE One+ with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/tpu
- Prusa CORE One+ with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/tpu-silk
- Prusa CORE One+ with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/tpu90a
- Prusa CORE One+ with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/tpu95a
- Prusa CORE One+ with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/transparent-clear-pla
- Prusa CORE One+ with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-core-one-plus/sunlu/upgrade-pla
- Prusa XL with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/90a-flexible-peba
- Prusa XL with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/basic-matte-pla
- Prusa XL with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/basic-silk-pla
- Prusa XL with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/conductive-pla
- Prusa XL with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/crystal-transparent-pla
- Prusa XL with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/dual-color-matte-pla
- Prusa XL with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/dual-color-silk-pla
- Prusa XL with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Prusa XL with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/glow-pla
- Prusa XL with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/glow-tpu
- Prusa XL with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/high-speed-pla
- Prusa XL with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/marble-pla
- Prusa XL with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/matte-pla
- Prusa XL with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/peba
- Prusa XL with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/petg
- Prusa XL with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/pla
- Prusa XL with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/amolen/pla-cf
- Prusa XL with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/pla-metal
- Prusa XL with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/quad-color-silk-pla
- Prusa XL with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/rainbow-silk-pla
- Prusa XL with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/s-series-silk-pla
- Prusa XL with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/shiny-glitter-silk-pla
- Prusa XL with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/shiny-gradient-silk-pla
- Prusa XL with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/amolen/silk-gf-pla
- Prusa XL with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/silk-pla
- Prusa XL with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/temperature-color-change-pla
- Prusa XL with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/tpu
- Prusa XL with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/transparent-pla
- Prusa XL with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/triple-color-matte-pla
- Prusa XL with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/triple-color-silk-pla
- Prusa XL with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/uv-color-change-pla
- Prusa XL with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/amolen/wood-pla
- Prusa XL with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/abs
- Prusa XL with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/asa
- Prusa XL with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/high-speed-pla
- Prusa XL with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/petg
- Prusa XL with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-basic
- Prusa XL with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-galaxy
- Prusa XL with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-marble
- Prusa XL with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-matte
- Prusa XL with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-metal
- Prusa XL with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-plus
- Prusa XL with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-silk
- Prusa XL with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-silk-dual-tricolor
- Prusa XL with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/pla-special
- Prusa XL with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/tpu
- Prusa XL with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/anycubic/translucent-petg
- Prusa XL with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/abs
- Prusa XL with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/abs-gf
- Prusa XL with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/asa
- Prusa XL with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/asa-aero
- Prusa XL with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/asa-cf
- Prusa XL with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/matte-asa-cf
- Prusa XL with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pa12-cf
- Prusa XL with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pa6-cf
- Prusa XL with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pa6-gf
- Prusa XL with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/paht-cf
- Prusa XL with Bambu Lab PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pc
- Prusa XL with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pc-fr
- Prusa XL with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pet-cf
- Prusa XL with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/petg-basic
- Prusa XL with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/petg-hf
- Prusa XL with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/petg-matte
- Prusa XL with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/petg-translucent
- Prusa XL with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/petg-cf
- Prusa XL with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla
- Prusa XL with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-aero
- Prusa XL with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 45 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-basic
- Prusa XL with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-basic-gradient
- Prusa XL with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-galaxy
- Prusa XL with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-glow
- Prusa XL with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-lite
- Prusa XL with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-marble
- Prusa XL with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-matte
- Prusa XL with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-metal
- Prusa XL with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-pure
- Prusa XL with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-silk-dual-color
- Prusa XL with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-silk-multi-color
- Prusa XL with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-silk-plus
- Prusa XL with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-sparkle
- Prusa XL with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-tough-plus
- Prusa XL with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-translucent
- Prusa XL with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-wood
- Prusa XL with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pla-cf
- Prusa XL with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/ppa-cf
- Prusa XL with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pps-cf
- Prusa XL with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/pva
- Prusa XL with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/silk-pla
- Prusa XL with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/support-for-abs
- Prusa XL with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/support-for-pa-pet
- Prusa XL with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/support-for-pla
- Prusa XL with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/support-for-pla-petg
- Prusa XL with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/tpu
- Prusa XL with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 35 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/tpu-85a
- Prusa XL with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 35 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/tpu-90a
- Prusa XL with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/tpu-95a-hf
- Prusa XL with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/bambu-lab/tpu-for-ams
- Prusa XL with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/asa
- Prusa XL with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/cpe
- Prusa XL with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/economy-pla
- Prusa XL with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/glow-pha
- Prusa XL with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/high-speed-pla
- Prusa XL with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/lw-ht-pla
- Prusa XL with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/matte-pla
- Prusa XL with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/petg
- Prusa XL with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/pha
- Prusa XL with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/pha-pla
- Prusa XL with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/pla
- Prusa XL with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/r-semi-pla
- Prusa XL with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/semi-pla
- Prusa XL with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/silk-pla
- Prusa XL with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/stonefill-pla
- Prusa XL with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/colorfabb/tpu
- Prusa XL with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/95a-tpu
- Prusa XL with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/abs
- Prusa XL with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/cr-petg
- Prusa XL with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/cr-pla-carbon
- Prusa XL with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/ender-fast-pla
- Prusa XL with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/ender-pla-plus
- Prusa XL with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hp-asa
- Prusa XL with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hp-tpu
- Prusa XL with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hyper-abs
- Prusa XL with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hyper-luminous-pla
- Prusa XL with Creality Hyper PA6-CF: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/creality/hyper-pa6-cf
- Prusa XL with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hyper-pc
- Prusa XL with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hyper-petg
- Prusa XL with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hyper-pla
- Prusa XL with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/creality/hyper-pla-cf
- Prusa XL with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/hyper-rainbow-pla
- Prusa XL with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/petg
- Prusa XL with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/pla
- Prusa XL with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/creality/pla-cf
- Prusa XL with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/pla-cr-wood
- Prusa XL with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/creality/ppa-cf
- Prusa XL with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/silk-pla
- Prusa XL with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/soleyin-basic-petg
- Prusa XL with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/creality/soleyin-ultra-pla
- Prusa XL with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/abs
- Prusa XL with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/asa
- Prusa XL with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/galaxy-pla
- Prusa XL with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/elegoo/paht-cf
- Prusa XL with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pc
- Prusa XL with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pc-fr
- Prusa XL with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pet-cf
- Prusa XL with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/petg
- Prusa XL with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/petg-pro
- Prusa XL with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/petg-translucent
- Prusa XL with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/petg-cf
- Prusa XL with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/elegoo/petg-gf
- Prusa XL with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla
- Prusa XL with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-basic
- Prusa XL with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-glow
- Prusa XL with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-marble
- Prusa XL with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-matte
- Prusa XL with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-metallic
- Prusa XL with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-plus
- Prusa XL with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-pro
- Prusa XL with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-sparkle
- Prusa XL with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-wood
- Prusa XL with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/elegoo/pla-cf
- Prusa XL with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/rapid-petg
- Prusa XL with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/rapid-pla-plus
- Prusa XL with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/rapid-tpu-95a
- Prusa XL with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/silk-pla
- Prusa XL with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/elegoo/tpu-95a
- Prusa XL with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/abs
- Prusa XL with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/abs-high-speed
- Prusa XL with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/abs-cf
- Prusa XL with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/abs-gf
- Prusa XL with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/abs-pc
- Prusa XL with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/abs-plus
- Prusa XL with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/asa
- Prusa XL with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/asa-high-speed
- Prusa XL with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/asa-light-weight
- Prusa XL with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/asa-cf
- Prusa XL with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/asa-gf
- Prusa XL with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pa12-nylon
- Prusa XL with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/pa12-cf
- Prusa XL with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/pa12-gf
- Prusa XL with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/pa6-cf
- Prusa XL with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/pa6-gf
- Prusa XL with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/petg
- Prusa XL with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/petg-cf
- Prusa XL with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla
- Prusa XL with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-burnt-titanium
- Prusa XL with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-burnt-titanium-dual-color
- Prusa XL with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-burnt-titanium-rainbow
- Prusa XL with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-burnt-titanium-triple-color
- Prusa XL with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-galaxy
- Prusa XL with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-high-speed
- Prusa XL with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-light-weight
- Prusa XL with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-luminous
- Prusa XL with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-marble
- Prusa XL with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte
- Prusa XL with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte-dual-color
- Prusa XL with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte-gradient
- Prusa XL with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte-high-speed
- Prusa XL with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte-high-speed-gradient-multi-color
- Prusa XL with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte-high-speed-rock-rainbow
- Prusa XL with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte-high-speed-triple-color
- Prusa XL with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-matte-rainbow
- Prusa XL with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-metallic
- Prusa XL with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-rainbow
- Prusa XL with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-silk
- Prusa XL with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-silk-high-speed-dual-color
- Prusa XL with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-silk-high-speed-quadruple
- Prusa XL with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-silk-high-speed-triple-color
- Prusa XL with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-silk-rainbow
- Prusa XL with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-ultra-silk
- Prusa XL with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-wood
- Prusa XL with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/pla-cf
- Prusa XL with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-plus
- Prusa XL with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pla-plus-high-speed
- Prusa XL with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/pp
- Prusa XL with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/eryone/pp-cf
- Prusa XL with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/tpu
- Prusa XL with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/tpu-90a
- Prusa XL with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/tpu-high-speed
- Prusa XL with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/eryone/tpu-rainbow
- Prusa XL with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/abs-plus
- Prusa XL with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/esun-3d/abs-pluscf
- Prusa XL with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/abs-plushs
- Prusa XL with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/asa-plus
- Prusa XL with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/dark-twinkling-pla-magic
- Prusa XL with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/esun-3d/epaht-cf
- Prusa XL with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/epla-plushs
- Prusa XL with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/esun-petg-matte
- Prusa XL with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/mystic-silk-pla
- Prusa XL with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/esun-3d/pa12-cf
- Prusa XL with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pa6-pa
- Prusa XL with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/esun-3d/pa6-pa-cf
- Prusa XL with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/peak-pla
- Prusa XL with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pet
- Prusa XL with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/petg
- Prusa XL with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/petg-basic
- Prusa XL with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/petg-matte
- Prusa XL with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/esun-3d/petg-pluscf
- Prusa XL with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/petg-plushs
- Prusa XL with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-basic
- Prusa XL with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-cf
- Prusa XL with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-chameleon
- Prusa XL with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-hs
- Prusa XL with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-lite
- Prusa XL with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-luminous
- Prusa XL with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-luminous-rainbow
- Prusa XL with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-lw
- Prusa XL with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-marble
- Prusa XL with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-matte
- Prusa XL with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-metal
- Prusa XL with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-silk
- Prusa XL with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-silk-candy
- Prusa XL with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-silk-magic
- Prusa XL with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-silk-metal
- Prusa XL with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-silk-rainbow
- Prusa XL with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-st
- Prusa XL with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-stars
- Prusa XL with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-wood
- Prusa XL with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-plus
- Prusa XL with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pla-plus-cmyk
- Prusa XL with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/pva
- Prusa XL with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/silk-petg
- Prusa XL with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/tpe-83a
- Prusa XL with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/tpu-95a
- Prusa XL with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/tpu-lw
- Prusa XL with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/esun-3d/uv-change-pla-uv-color-change
- Prusa XL with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/basic-pla
- Prusa XL with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/biofusion-pla
- Prusa XL with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/biofusion-silk-pla
- Prusa XL with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/durapro-abs
- Prusa XL with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/durapro-asa
- Prusa XL with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/extrudr/durapro-cf-pa12
- Prusa XL with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/durapro-matte-asa
- Prusa XL with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/durapro-pa12
- Prusa XL with extrudr DuraPro PBT PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/durapro-pbt-pc
- Prusa XL with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/flax-pla
- Prusa XL with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/extrudr/flex-hard-cf-tpu
- Prusa XL with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/flex-hard-tpu
- Prusa XL with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/flex-medium-tpu
- Prusa XL with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/flex-semisoft-tpu
- Prusa XL with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/glow-petg
- Prusa XL with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/greentec-matte-pla
- Prusa XL with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/greentec-pla
- Prusa XL with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/pctg
- Prusa XL with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/pearl-pla
- Prusa XL with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/petg
- Prusa XL with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/pla-nx2-matt
- Prusa XL with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/extrudr/wood-pla
- Prusa XL with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 290 °C. The listed bed maximum of 105 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/fillamentum/asa-extrafill
- Prusa XL with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/fillamentum/cpe-hg100
- Prusa XL with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 55 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/fillamentum/pla-crystal-clear
- Prusa XL with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/fillamentum/pla-extrafill
- Prusa XL with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/abs
- Prusa XL with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/glow-abs
- Prusa XL with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/glow-pla
- Prusa XL with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/metallic-finish-pla
- Prusa XL with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/petg
- Prusa XL with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/pla
- Prusa XL with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/pla-basic
- Prusa XL with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/hatchbox/pla-cf
- Prusa XL with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/pla-matte
- Prusa XL with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/pla-max
- Prusa XL with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/pla-metal
- Prusa XL with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/pla-pro
- Prusa XL with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/silk-pla
- Prusa XL with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/tpu
- Prusa XL with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/transparent-pla
- Prusa XL with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/uv-color-changing-pla
- Prusa XL with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/hatchbox/wood-pla
- Prusa XL with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/abs
- Prusa XL with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/carbon-fiber-nylon
- Prusa XL with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/galaxy-pla
- Prusa XL with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/glow-abs
- Prusa XL with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/high-speed-pla-plus
- Prusa XL with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/petg-plus
- Prusa XL with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla
- Prusa XL with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla-basic
- Prusa XL with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla-chameleon
- Prusa XL with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla-glitter-rainbow
- Prusa XL with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla-matte
- Prusa XL with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla-mystic-silk
- Prusa XL with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla-silk-rainbow
- Prusa XL with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/pla-plus
- Prusa XL with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/silk-pla
- Prusa XL with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/inland/tpu
- Prusa XL with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/jayo/high-speed-matte-pla
- Prusa XL with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/jayo/matte-pla
- Prusa XL with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/jayo/petg
- Prusa XL with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/jayo/pla
- Prusa XL with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/jayo/pla-plus
- Prusa XL with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/jayo/silk-pla
- Prusa XL with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/jayo/tpu
- Prusa XL with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/abs
- Prusa XL with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/glow-pla
- Prusa XL with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/high-speed-petg
- Prusa XL with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/high-speed-pla
- Prusa XL with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/matte-pla
- Prusa XL with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/petg
- Prusa XL with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/kingroon/petg-cf
- Prusa XL with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/pla
- Prusa XL with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/pla-basic
- Prusa XL with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/kingroon/pla-cf
- Prusa XL with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/silk-pla
- Prusa XL with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/kingroon/tpu
- Prusa XL with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/abs
- Prusa XL with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/abs-basic
- Prusa XL with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/asa
- Prusa XL with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/asa-basic
- Prusa XL with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/easy-nylon
- Prusa XL with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/glow-abs
- Prusa XL with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/glow-pla
- Prusa XL with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/high-speed-petg
- Prusa XL with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/high-speed-pla
- Prusa XL with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/high-speed-tpu
- Prusa XL with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/luminous-high-speed-glow-tpu
- Prusa XL with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/matte-pla
- Prusa XL with Overture PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pc
- Prusa XL with Overture PC Professional: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pc-professional
- Prusa XL with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/petg
- Prusa XL with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/petg-basic
- Prusa XL with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/petg-refill
- Prusa XL with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla
- Prusa XL with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-air
- Prusa XL with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/overture/pla-cf
- Prusa XL with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-cream
- Prusa XL with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-easy
- Prusa XL with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-easy-glow
- Prusa XL with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-plus
- Prusa XL with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-professional
- Prusa XL with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-refill
- Prusa XL with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-rock
- Prusa XL with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-super
- Prusa XL with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/pla-turbo-rapid
- Prusa XL with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/shimmer-pla
- Prusa XL with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/silk-pla
- Prusa XL with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/overture/tpu
- Prusa XL with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/abs
- Prusa XL with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/asa
- Prusa XL with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/cpe
- Prusa XL with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/creator-special-edition-pla
- Prusa XL with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/draft-pla
- Prusa XL with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/dual-panchroma-matte-pla
- Prusa XL with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/for-production-matte-pla
- Prusa XL with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/glow-pla
- Prusa XL with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/gradient-panchroma-pla
- Prusa XL with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 65 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/ht-pla-pro
- Prusa XL with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/ht-pla
- Prusa XL with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/ht-pla-gf
- Prusa XL with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/lw-polylite-pla
- Prusa XL with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/metallic-polylite-pla
- Prusa XL with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/metallic-polylite-silk-abs
- Prusa XL with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/metallic-polylite-silk-pla
- Prusa XL with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/muted-panchroma-matte-pla
- Prusa XL with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/neon-panchroma-pla
- Prusa XL with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/pa12-cf
- Prusa XL with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/pa6-cf
- Prusa XL with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/pa6-gf
- Prusa XL with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/panchroma-cope
- Prusa XL with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/panchroma-glow-pla
- Prusa XL with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/panchroma-pla
- Prusa XL with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/panchroma-silk-pla
- Prusa XL with Polymaker PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pc
- Prusa XL with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 105 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pc-abs
- Prusa XL with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pc-pbt
- Prusa XL with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/pet-cf
- Prusa XL with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/petg
- Prusa XL with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/petg-cf
- Prusa XL with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pla
- Prusa XL with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pla-cf
- Prusa XL with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pla-polycast
- Prusa XL with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polyflex-95-hf-high-speed-tpu
- Prusa XL with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polyflex-tpu
- Prusa XL with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polylite-abs
- Prusa XL with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polylite-asa
- Prusa XL with Polymaker Polylite PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polylite-pc
- Prusa XL with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polylite-petg
- Prusa XL with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polylite-pla
- Prusa XL with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/polylite-pla-cf
- Prusa XL with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polymaker-pla-pro
- Prusa XL with Polymaker Polymax PC: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polymax-pc
- Prusa XL with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polymax-petg
- Prusa XL with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polymax-pla
- Prusa XL with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polymide-copa-pa6
- Prusa XL with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polysmooth
- Prusa XL with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polysonic-pla
- Prusa XL with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/polysupport-for-pla
- Prusa XL with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/polymaker/pps-cf
- Prusa XL with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pva
- Prusa XL with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pva-polydissolve-s1
- Prusa XL with Polymaker PVA PolySupport for PA12: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pva-polysupport-for-pa12
- Prusa XL with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/pvb
- Prusa XL with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/satin-panchroma-pla
- Prusa XL with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/silk-abs
- Prusa XL with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/silk-pla
- Prusa XL with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/polymaker/wood-pla
- Prusa XL with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/basic-pla
- Prusa XL with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/conductive-pla
- Prusa XL with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/fiber-ht-matte-pla
- Prusa XL with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/fluorescent-pla
- Prusa XL with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/glitter-petg
- Prusa XL with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/glitter-pla
- Prusa XL with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/glow-pla
- Prusa XL with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/high-speed-pla
- Prusa XL with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/iron-metal-composite-pla
- Prusa XL with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/marble-pla
- Prusa XL with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/matte-pla
- Prusa XL with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/metal-composite-pla
- Prusa XL with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/metallic-petg
- Prusa XL with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/metallic-pla
- Prusa XL with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/multicolor-pla
- Prusa XL with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/nebula-pla
- Prusa XL with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/opaque-pla
- Prusa XL with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/pearl-pla
- Prusa XL with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/petg
- Prusa XL with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/protopasta/petg-cf
- Prusa XL with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/pla
- Prusa XL with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/protopasta/pla-cf
- Prusa XL with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/pla-green-glow-in-the-dark
- Prusa XL with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/recycled-petg
- Prusa XL with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/recycled-pla
- Prusa XL with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/satin-pla
- Prusa XL with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/silk-petg
- Prusa XL with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/silk-pla
- Prusa XL with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/simply-petg
- Prusa XL with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/stainless-steel-metal-composite-pla
- Prusa XL with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/protopasta/static-dissipative-carbon-fiber-pla
- Prusa XL with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/static-dissipative-petg
- Prusa XL with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/static-dissipative-pla
- Prusa XL with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/steel-metal-composite-pla
- Prusa XL with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/still-colorful-recycled-pla
- Prusa XL with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/thermochromic-pla
- Prusa XL with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/tpe
- Prusa XL with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/tpu
- Prusa XL with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/translucent-petg
- Prusa XL with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/protopasta/translucent-pla
- Prusa XL with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/asa
- Prusa XL with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/blend-silk-pla
- Prusa XL with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/matte-petg
- Prusa XL with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/mystic-premium-pla
- Prusa XL with Prusament PA11-CF: The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. The listed bed maximum of 115 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/prusament/pa11-cf
- Prusa XL with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pc
- Prusa XL with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pc-blend
- Prusa XL with Prusament PC-CF: The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/prusament/pc-cf
- Prusa XL with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 290 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pei
- Prusa XL with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pei-1010
- Prusa XL with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/petg
- Prusa XL with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/prusament/petg-cf
- Prusa XL with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/petg-magnetite
- Prusa XL with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/petg-tungsten
- Prusa XL with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/petg-v0
- Prusa XL with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pla
- Prusa XL with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pla-recycled
- Prusa XL with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pla-woodfill
- Prusa XL with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 85 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/prusament/pp-cf
- Prusa XL with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/prusament/pp-gf
- Prusa XL with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/pvb
- Prusa XL with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/rpla
- Prusa XL with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/prusament/tpu-95a
- Prusa XL with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-abs-ht-hf
- Prusa XL with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-abs-cf-core
- Prusa XL with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-abs-gf
- Prusa XL with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-asa-gf
- Prusa XL with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-pet-cf
- Prusa XL with Siraya Tech Fibreheart PET-GF: The listed nozzle temperature starts at 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-pet-gf
- Prusa XL with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-petg-cf-pro
- Prusa XL with Siraya Tech Fibreheart PPA: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-ppa
- Prusa XL with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-ppa-cf
- Prusa XL with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-ppa-cf-core
- Prusa XL with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/siraya-tech/fibreheart-tpu-gf
- Prusa XL with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 45 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/flex-tpu-64d
- Prusa XL with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/flex-tpu-85a
- Prusa XL with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/flex-tpu-air-85a
- Prusa XL with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/rebound-peba-85a
- Prusa XL with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/rebound-peba-95a
- Prusa XL with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/rebound-peba-air-95a
- Prusa XL with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/roamr-tpu-air-hr-80a
- Prusa XL with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 50 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/siraya-tech/roamr-tpu-air-hr-85a
- Prusa XL with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/95a-high-speed-tpu
- Prusa XL with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/abs
- Prusa XL with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/abs-fr
- Prusa XL with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/apla
- Prusa XL with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/asa
- Prusa XL with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/fluorescent-pla
- Prusa XL with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/glow-petg
- Prusa XL with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/glow-pla
- Prusa XL with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/high-speed-abs
- Prusa XL with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/high-speed-matte-petg
- Prusa XL with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/high-speed-matte-pla
- Prusa XL with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/high-speed-petg
- Prusa XL with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/high-speed-pla
- Prusa XL with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/high-speed-pla-marble
- Prusa XL with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/high-speed-pla-plus
- Prusa XL with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/luminous-glow-in-the-dark-petg
- Prusa XL with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/sunlu/matte-petg-cf
- Prusa XL with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/sunlu/pa12-cf
- Prusa XL with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pa6-easy-pa
- Prusa XL with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 290 °C. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/sunlu/pa6-cf
- Prusa XL with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/sunlu/pa6-gf
- Prusa XL with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pc
- Prusa XL with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pc-abs
- Prusa XL with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pcl
- Prusa XL with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/peek
- Prusa XL with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/petg
- Prusa XL with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 290 °C. The listed bed maximum of 80 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/petg-2-0
- Prusa XL with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/sunlu/petg-carbon-fiber
- Prusa XL with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/petg-glow-in-the-dark-filament
- Prusa XL with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla
- Prusa XL with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-carbon-fiber
- Prusa XL with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-cf
- Prusa XL with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-classic
- Prusa XL with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-galaxy
- Prusa XL with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-glow-in-the-dark
- Prusa XL with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-matte
- Prusa XL with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-matte-dual-color
- Prusa XL with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-rainbow
- Prusa XL with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-silk
- Prusa XL with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-transparent-rainbow
- Prusa XL with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-twinkling
- Prusa XL with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-wood
- Prusa XL with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-meta
- Prusa XL with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-plus
- Prusa XL with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pla-plus-2-0
- Prusa XL with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pp
- Prusa XL with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pva
- Prusa XL with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/pvb
- Prusa XL with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/real-wood-fiber-pla
- Prusa XL with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/silk-2-0
- Prusa XL with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/silk-pla-plus
- Prusa XL with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/silk-pla-plus-dual-color
- Prusa XL with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/silk-pla-plus-four-color
- Prusa XL with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/silk-pla-plus-rainbow
- Prusa XL with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/silk-pla-plus-tri-color
- Prusa XL with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/temperature-color-change-pla
- Prusa XL with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/tpu
- Prusa XL with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 290 °C. The listed bed maximum of 60 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/tpu-silk
- Prusa XL with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/tpu90a
- Prusa XL with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/tpu95a
- Prusa XL with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/transparent-clear-pla
- Prusa XL with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C. The listed bed maximum of 70 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/prusa-xl/sunlu/upgrade-pla
- Creality K1C with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/90a-flexible-peba
- Creality K1C with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/basic-matte-pla
- Creality K1C with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/basic-silk-pla
- Creality K1C with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/conductive-pla
- Creality K1C with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/crystal-transparent-pla
- Creality K1C with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/dual-color-matte-pla
- Creality K1C with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/dual-color-silk-pla
- Creality K1C with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Creality K1C with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/glow-pla
- Creality K1C with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/glow-tpu
- Creality K1C with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/high-speed-pla
- Creality K1C with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/marble-pla
- Creality K1C with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/matte-pla
- Creality K1C with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/peba
- Creality K1C with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/petg
- Creality K1C with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/pla
- Creality K1C with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/amolen/pla-cf
- Creality K1C with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/pla-metal
- Creality K1C with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/quad-color-silk-pla
- Creality K1C with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/rainbow-silk-pla
- Creality K1C with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/s-series-silk-pla
- Creality K1C with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/shiny-glitter-silk-pla
- Creality K1C with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/shiny-gradient-silk-pla
- Creality K1C with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/amolen/silk-gf-pla
- Creality K1C with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/silk-pla
- Creality K1C with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/temperature-color-change-pla
- Creality K1C with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/tpu
- Creality K1C with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/transparent-pla
- Creality K1C with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/triple-color-matte-pla
- Creality K1C with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/triple-color-silk-pla
- Creality K1C with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/uv-color-change-pla
- Creality K1C with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/amolen/wood-pla
- Creality K1C with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/abs
- Creality K1C with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/asa
- Creality K1C with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/high-speed-pla
- Creality K1C with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/petg
- Creality K1C with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-basic
- Creality K1C with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-galaxy
- Creality K1C with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-marble
- Creality K1C with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-matte
- Creality K1C with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-metal
- Creality K1C with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-plus
- Creality K1C with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-silk
- Creality K1C with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-silk-dual-tricolor
- Creality K1C with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/pla-special
- Creality K1C with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/tpu
- Creality K1C with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/anycubic/translucent-petg
- Creality K1C with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/abs
- Creality K1C with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/abs-gf
- Creality K1C with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/asa
- Creality K1C with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/asa-aero
- Creality K1C with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/asa-cf
- Creality K1C with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/matte-asa-cf
- Creality K1C with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pa12-cf
- Creality K1C with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pa6-cf
- Creality K1C with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pa6-gf
- Creality K1C with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/paht-cf
- Creality K1C with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pc
- Creality K1C with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pc-fr
- Creality K1C with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pet-cf
- Creality K1C with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/petg-basic
- Creality K1C with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/petg-hf
- Creality K1C with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/petg-matte
- Creality K1C with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/petg-translucent
- Creality K1C with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/petg-cf
- Creality K1C with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla
- Creality K1C with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-aero
- Creality K1C with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-basic
- Creality K1C with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-basic-gradient
- Creality K1C with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-galaxy
- Creality K1C with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-glow
- Creality K1C with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-lite
- Creality K1C with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-marble
- Creality K1C with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-matte
- Creality K1C with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-metal
- Creality K1C with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-pure
- Creality K1C with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-silk-dual-color
- Creality K1C with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-silk-multi-color
- Creality K1C with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-silk-plus
- Creality K1C with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-sparkle
- Creality K1C with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-tough-plus
- Creality K1C with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-translucent
- Creality K1C with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-wood
- Creality K1C with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pla-cf
- Creality K1C with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/ppa-cf
- Creality K1C with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pps-cf
- Creality K1C with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/pva
- Creality K1C with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/silk-pla
- Creality K1C with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/support-for-abs
- Creality K1C with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/support-for-pa-pet
- Creality K1C with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/support-for-pla
- Creality K1C with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/support-for-pla-petg
- Creality K1C with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/tpu
- Creality K1C with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/tpu-85a
- Creality K1C with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/tpu-90a
- Creality K1C with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/tpu-95a-hf
- Creality K1C with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/bambu-lab/tpu-for-ams
- Creality K1C with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/asa
- Creality K1C with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/cpe
- Creality K1C with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/economy-pla
- Creality K1C with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/glow-pha
- Creality K1C with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/high-speed-pla
- Creality K1C with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/lw-ht-pla
- Creality K1C with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/matte-pla
- Creality K1C with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/petg
- Creality K1C with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/pha
- Creality K1C with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/pha-pla
- Creality K1C with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/pla
- Creality K1C with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/r-semi-pla
- Creality K1C with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/semi-pla
- Creality K1C with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/silk-pla
- Creality K1C with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/stonefill-pla
- Creality K1C with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/colorfabb/tpu
- Creality K1C with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/95a-tpu
- Creality K1C with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/abs
- Creality K1C with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/cr-petg
- Creality K1C with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/cr-pla-carbon
- Creality K1C with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/ender-fast-pla
- Creality K1C with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/ender-pla-plus
- Creality K1C with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hp-asa
- Creality K1C with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hp-tpu
- Creality K1C with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hyper-abs
- Creality K1C with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hyper-luminous-pla
- Creality K1C with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/creality/hyper-pa6-cf
- Creality K1C with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hyper-pc
- Creality K1C with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hyper-petg
- Creality K1C with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hyper-pla
- Creality K1C with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/creality/hyper-pla-cf
- Creality K1C with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/hyper-rainbow-pla
- Creality K1C with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/petg
- Creality K1C with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/pla
- Creality K1C with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/creality/pla-cf
- Creality K1C with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/pla-cr-wood
- Creality K1C with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/creality/ppa-cf
- Creality K1C with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/silk-pla
- Creality K1C with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/soleyin-basic-petg
- Creality K1C with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/creality/soleyin-ultra-pla
- Creality K1C with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/abs
- Creality K1C with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/asa
- Creality K1C with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/galaxy-pla
- Creality K1C with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/elegoo/paht-cf
- Creality K1C with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pc
- Creality K1C with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pc-fr
- Creality K1C with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pet-cf
- Creality K1C with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/petg
- Creality K1C with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/petg-pro
- Creality K1C with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/petg-translucent
- Creality K1C with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/petg-cf
- Creality K1C with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/elegoo/petg-gf
- Creality K1C with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla
- Creality K1C with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-basic
- Creality K1C with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-glow
- Creality K1C with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-marble
- Creality K1C with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-matte
- Creality K1C with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-metallic
- Creality K1C with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-plus
- Creality K1C with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-pro
- Creality K1C with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-sparkle
- Creality K1C with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-wood
- Creality K1C with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/elegoo/pla-cf
- Creality K1C with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/rapid-petg
- Creality K1C with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/rapid-pla-plus
- Creality K1C with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/rapid-tpu-95a
- Creality K1C with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/silk-pla
- Creality K1C with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/elegoo/tpu-95a
- Creality K1C with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/abs
- Creality K1C with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/abs-high-speed
- Creality K1C with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/abs-cf
- Creality K1C with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/abs-gf
- Creality K1C with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/abs-pc
- Creality K1C with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/abs-plus
- Creality K1C with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/asa
- Creality K1C with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/asa-high-speed
- Creality K1C with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/asa-light-weight
- Creality K1C with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/asa-cf
- Creality K1C with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/asa-gf
- Creality K1C with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pa12-nylon
- Creality K1C with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/pa12-cf
- Creality K1C with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/pa12-gf
- Creality K1C with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/pa6-cf
- Creality K1C with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/pa6-gf
- Creality K1C with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/petg
- Creality K1C with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/petg-cf
- Creality K1C with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla
- Creality K1C with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-burnt-titanium
- Creality K1C with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-burnt-titanium-dual-color
- Creality K1C with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-burnt-titanium-rainbow
- Creality K1C with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-burnt-titanium-triple-color
- Creality K1C with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-galaxy
- Creality K1C with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-high-speed
- Creality K1C with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-light-weight
- Creality K1C with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-luminous
- Creality K1C with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-marble
- Creality K1C with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte
- Creality K1C with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte-dual-color
- Creality K1C with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte-gradient
- Creality K1C with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte-high-speed
- Creality K1C with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte-high-speed-gradient-multi-color
- Creality K1C with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte-high-speed-rock-rainbow
- Creality K1C with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte-high-speed-triple-color
- Creality K1C with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-matte-rainbow
- Creality K1C with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-metallic
- Creality K1C with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-rainbow
- Creality K1C with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-silk
- Creality K1C with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-silk-high-speed-dual-color
- Creality K1C with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-silk-high-speed-quadruple
- Creality K1C with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-silk-high-speed-triple-color
- Creality K1C with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-silk-rainbow
- Creality K1C with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-ultra-silk
- Creality K1C with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-wood
- Creality K1C with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/pla-cf
- Creality K1C with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-plus
- Creality K1C with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pla-plus-high-speed
- Creality K1C with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/pp
- Creality K1C with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/eryone/pp-cf
- Creality K1C with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/tpu
- Creality K1C with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/tpu-90a
- Creality K1C with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/tpu-high-speed
- Creality K1C with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/eryone/tpu-rainbow
- Creality K1C with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/abs-plus
- Creality K1C with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/esun-3d/abs-pluscf
- Creality K1C with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/abs-plushs
- Creality K1C with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/asa-plus
- Creality K1C with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/dark-twinkling-pla-magic
- Creality K1C with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/esun-3d/epaht-cf
- Creality K1C with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/epla-plushs
- Creality K1C with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/esun-petg-matte
- Creality K1C with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/mystic-silk-pla
- Creality K1C with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/esun-3d/pa12-cf
- Creality K1C with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pa6-pa
- Creality K1C with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/esun-3d/pa6-pa-cf
- Creality K1C with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/peak-pla
- Creality K1C with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pet
- Creality K1C with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/petg
- Creality K1C with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/petg-basic
- Creality K1C with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/petg-matte
- Creality K1C with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/esun-3d/petg-pluscf
- Creality K1C with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/petg-plushs
- Creality K1C with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-basic
- Creality K1C with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-cf
- Creality K1C with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-chameleon
- Creality K1C with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-hs
- Creality K1C with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-lite
- Creality K1C with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-luminous
- Creality K1C with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-luminous-rainbow
- Creality K1C with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-lw
- Creality K1C with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-marble
- Creality K1C with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-matte
- Creality K1C with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-metal
- Creality K1C with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-silk
- Creality K1C with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-silk-candy
- Creality K1C with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-silk-magic
- Creality K1C with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-silk-metal
- Creality K1C with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-silk-rainbow
- Creality K1C with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-st
- Creality K1C with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-stars
- Creality K1C with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-wood
- Creality K1C with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-plus
- Creality K1C with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pla-plus-cmyk
- Creality K1C with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/pva
- Creality K1C with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/silk-petg
- Creality K1C with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/tpe-83a
- Creality K1C with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/tpu-95a
- Creality K1C with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/tpu-lw
- Creality K1C with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/esun-3d/uv-change-pla-uv-color-change
- Creality K1C with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/basic-pla
- Creality K1C with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/biofusion-pla
- Creality K1C with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/biofusion-silk-pla
- Creality K1C with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/durapro-abs
- Creality K1C with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/durapro-asa
- Creality K1C with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/extrudr/durapro-cf-pa12
- Creality K1C with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/durapro-matte-asa
- Creality K1C with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/durapro-pa12
- Creality K1C with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/durapro-pbt-pc
- Creality K1C with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/flax-pla
- Creality K1C with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/extrudr/flex-hard-cf-tpu
- Creality K1C with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/flex-hard-tpu
- Creality K1C with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/flex-medium-tpu
- Creality K1C with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/flex-semisoft-tpu
- Creality K1C with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/glow-petg
- Creality K1C with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/greentec-matte-pla
- Creality K1C with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/greentec-pla
- Creality K1C with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/pctg
- Creality K1C with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/pearl-pla
- Creality K1C with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/petg
- Creality K1C with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/pla-nx2-matt
- Creality K1C with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/extrudr/wood-pla
- Creality K1C with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/fillamentum/asa-extrafill
- Creality K1C with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/fillamentum/cpe-hg100
- Creality K1C with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/fillamentum/pla-crystal-clear
- Creality K1C with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/fillamentum/pla-extrafill
- Creality K1C with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/abs
- Creality K1C with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/glow-abs
- Creality K1C with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/glow-pla
- Creality K1C with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/metallic-finish-pla
- Creality K1C with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/petg
- Creality K1C with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/pla
- Creality K1C with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/pla-basic
- Creality K1C with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/hatchbox/pla-cf
- Creality K1C with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/pla-matte
- Creality K1C with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/pla-max
- Creality K1C with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/pla-metal
- Creality K1C with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/pla-pro
- Creality K1C with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/silk-pla
- Creality K1C with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/tpu
- Creality K1C with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/transparent-pla
- Creality K1C with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/uv-color-changing-pla
- Creality K1C with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/hatchbox/wood-pla
- Creality K1C with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/abs
- Creality K1C with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/carbon-fiber-nylon
- Creality K1C with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/galaxy-pla
- Creality K1C with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/glow-abs
- Creality K1C with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/high-speed-pla-plus
- Creality K1C with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/petg-plus
- Creality K1C with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla
- Creality K1C with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla-basic
- Creality K1C with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla-chameleon
- Creality K1C with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla-glitter-rainbow
- Creality K1C with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla-matte
- Creality K1C with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla-mystic-silk
- Creality K1C with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla-silk-rainbow
- Creality K1C with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/pla-plus
- Creality K1C with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/silk-pla
- Creality K1C with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/inland/tpu
- Creality K1C with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/jayo/high-speed-matte-pla
- Creality K1C with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/jayo/matte-pla
- Creality K1C with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/jayo/petg
- Creality K1C with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/jayo/pla
- Creality K1C with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/jayo/pla-plus
- Creality K1C with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/jayo/silk-pla
- Creality K1C with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/jayo/tpu
- Creality K1C with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/abs
- Creality K1C with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/glow-pla
- Creality K1C with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/high-speed-petg
- Creality K1C with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/high-speed-pla
- Creality K1C with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/matte-pla
- Creality K1C with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/petg
- Creality K1C with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/kingroon/petg-cf
- Creality K1C with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/pla
- Creality K1C with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/pla-basic
- Creality K1C with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/kingroon/pla-cf
- Creality K1C with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/silk-pla
- Creality K1C with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/kingroon/tpu
- Creality K1C with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/abs
- Creality K1C with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/abs-basic
- Creality K1C with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/asa
- Creality K1C with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/asa-basic
- Creality K1C with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/easy-nylon
- Creality K1C with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/glow-abs
- Creality K1C with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/glow-pla
- Creality K1C with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/high-speed-petg
- Creality K1C with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/high-speed-pla
- Creality K1C with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/high-speed-tpu
- Creality K1C with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/luminous-high-speed-glow-tpu
- Creality K1C with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/matte-pla
- Creality K1C with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pc
- Creality K1C with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pc-professional
- Creality K1C with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/petg
- Creality K1C with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/petg-basic
- Creality K1C with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/petg-refill
- Creality K1C with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla
- Creality K1C with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-air
- Creality K1C with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/overture/pla-cf
- Creality K1C with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-cream
- Creality K1C with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-easy
- Creality K1C with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-easy-glow
- Creality K1C with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-plus
- Creality K1C with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-professional
- Creality K1C with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-refill
- Creality K1C with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-rock
- Creality K1C with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-super
- Creality K1C with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/pla-turbo-rapid
- Creality K1C with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/shimmer-pla
- Creality K1C with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/silk-pla
- Creality K1C with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/overture/tpu
- Creality K1C with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/abs
- Creality K1C with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/asa
- Creality K1C with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/cpe
- Creality K1C with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/creator-special-edition-pla
- Creality K1C with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/draft-pla
- Creality K1C with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/dual-panchroma-matte-pla
- Creality K1C with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/for-production-matte-pla
- Creality K1C with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/glow-pla
- Creality K1C with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/gradient-panchroma-pla
- Creality K1C with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/ht-pla-pro
- Creality K1C with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/ht-pla
- Creality K1C with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/ht-pla-gf
- Creality K1C with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/lw-polylite-pla
- Creality K1C with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/metallic-polylite-pla
- Creality K1C with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/metallic-polylite-silk-abs
- Creality K1C with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/metallic-polylite-silk-pla
- Creality K1C with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/muted-panchroma-matte-pla
- Creality K1C with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/neon-panchroma-pla
- Creality K1C with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/pa12-cf
- Creality K1C with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/pa6-cf
- Creality K1C with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/pa6-gf
- Creality K1C with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/panchroma-cope
- Creality K1C with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/panchroma-glow-pla
- Creality K1C with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/panchroma-pla
- Creality K1C with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/panchroma-silk-pla
- Creality K1C with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pc
- Creality K1C with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pc-abs
- Creality K1C with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pc-pbt
- Creality K1C with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/pet-cf
- Creality K1C with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/petg
- Creality K1C with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/petg-cf
- Creality K1C with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pla
- Creality K1C with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pla-cf
- Creality K1C with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pla-polycast
- Creality K1C with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polyflex-95-hf-high-speed-tpu
- Creality K1C with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polyflex-tpu
- Creality K1C with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polylite-abs
- Creality K1C with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polylite-asa
- Creality K1C with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polylite-pc
- Creality K1C with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polylite-petg
- Creality K1C with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polylite-pla
- Creality K1C with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/polylite-pla-cf
- Creality K1C with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polymaker-pla-pro
- Creality K1C with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polymax-pc
- Creality K1C with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polymax-petg
- Creality K1C with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polymax-pla
- Creality K1C with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polymide-copa-pa6
- Creality K1C with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polysmooth
- Creality K1C with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polysonic-pla
- Creality K1C with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/polysupport-for-pla
- Creality K1C with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/polymaker/pps-cf
- Creality K1C with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pva
- Creality K1C with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pva-polydissolve-s1
- Creality K1C with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pva-polysupport-for-pa12
- Creality K1C with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/pvb
- Creality K1C with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/satin-panchroma-pla
- Creality K1C with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/silk-abs
- Creality K1C with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/silk-pla
- Creality K1C with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/polymaker/wood-pla
- Creality K1C with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/basic-pla
- Creality K1C with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/conductive-pla
- Creality K1C with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/fiber-ht-matte-pla
- Creality K1C with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/fluorescent-pla
- Creality K1C with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/glitter-petg
- Creality K1C with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/glitter-pla
- Creality K1C with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/glow-pla
- Creality K1C with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/high-speed-pla
- Creality K1C with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/iron-metal-composite-pla
- Creality K1C with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/marble-pla
- Creality K1C with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/matte-pla
- Creality K1C with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/metal-composite-pla
- Creality K1C with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/metallic-petg
- Creality K1C with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/metallic-pla
- Creality K1C with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/multicolor-pla
- Creality K1C with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/nebula-pla
- Creality K1C with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/opaque-pla
- Creality K1C with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/pearl-pla
- Creality K1C with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/petg
- Creality K1C with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/protopasta/petg-cf
- Creality K1C with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/pla
- Creality K1C with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/protopasta/pla-cf
- Creality K1C with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/pla-green-glow-in-the-dark
- Creality K1C with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/recycled-petg
- Creality K1C with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/recycled-pla
- Creality K1C with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/satin-pla
- Creality K1C with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/silk-petg
- Creality K1C with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/silk-pla
- Creality K1C with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/simply-petg
- Creality K1C with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/stainless-steel-metal-composite-pla
- Creality K1C with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/protopasta/static-dissipative-carbon-fiber-pla
- Creality K1C with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/static-dissipative-petg
- Creality K1C with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/static-dissipative-pla
- Creality K1C with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/steel-metal-composite-pla
- Creality K1C with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/still-colorful-recycled-pla
- Creality K1C with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/thermochromic-pla
- Creality K1C with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/tpe
- Creality K1C with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/tpu
- Creality K1C with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/translucent-petg
- Creality K1C with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/protopasta/translucent-pla
- Creality K1C with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/asa
- Creality K1C with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/blend-silk-pla
- Creality K1C with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/matte-petg
- Creality K1C with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/mystic-premium-pla
- Creality K1C with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 115 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/prusament/pa11-cf
- Creality K1C with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pc
- Creality K1C with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pc-blend
- Creality K1C with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/prusament/pc-cf
- Creality K1C with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pei
- Creality K1C with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pei-1010
- Creality K1C with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/petg
- Creality K1C with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/prusament/petg-cf
- Creality K1C with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/petg-magnetite
- Creality K1C with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/petg-tungsten
- Creality K1C with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/petg-v0
- Creality K1C with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pla
- Creality K1C with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pla-recycled
- Creality K1C with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pla-woodfill
- Creality K1C with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/prusament/pp-cf
- Creality K1C with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/prusament/pp-gf
- Creality K1C with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/pvb
- Creality K1C with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/rpla
- Creality K1C with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/prusament/tpu-95a
- Creality K1C with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-abs-ht-hf
- Creality K1C with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-abs-cf-core
- Creality K1C with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-abs-gf
- Creality K1C with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-asa-gf
- Creality K1C with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-pet-cf
- Creality K1C with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-pet-gf
- Creality K1C with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-petg-cf-pro
- Creality K1C with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-ppa
- Creality K1C with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-ppa-cf
- Creality K1C with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-ppa-cf-core
- Creality K1C with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/siraya-tech/fibreheart-tpu-gf
- Creality K1C with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/flex-tpu-64d
- Creality K1C with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/flex-tpu-85a
- Creality K1C with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/flex-tpu-air-85a
- Creality K1C with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/rebound-peba-85a
- Creality K1C with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/rebound-peba-95a
- Creality K1C with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/rebound-peba-air-95a
- Creality K1C with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/roamr-tpu-air-hr-80a
- Creality K1C with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/siraya-tech/roamr-tpu-air-hr-85a
- Creality K1C with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/95a-high-speed-tpu
- Creality K1C with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/abs
- Creality K1C with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/abs-fr
- Creality K1C with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/apla
- Creality K1C with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/asa
- Creality K1C with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/fluorescent-pla
- Creality K1C with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/glow-petg
- Creality K1C with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/glow-pla
- Creality K1C with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/high-speed-abs
- Creality K1C with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/high-speed-matte-petg
- Creality K1C with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/high-speed-matte-pla
- Creality K1C with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/high-speed-petg
- Creality K1C with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/high-speed-pla
- Creality K1C with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/high-speed-pla-marble
- Creality K1C with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/high-speed-pla-plus
- Creality K1C with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/luminous-glow-in-the-dark-petg
- Creality K1C with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/sunlu/matte-petg-cf
- Creality K1C with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/sunlu/pa12-cf
- Creality K1C with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pa6-easy-pa
- Creality K1C with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/sunlu/pa6-cf
- Creality K1C with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/sunlu/pa6-gf
- Creality K1C with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pc
- Creality K1C with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pc-abs
- Creality K1C with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pcl
- Creality K1C with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/peek
- Creality K1C with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/petg
- Creality K1C with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/petg-2-0
- Creality K1C with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/sunlu/petg-carbon-fiber
- Creality K1C with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/petg-glow-in-the-dark-filament
- Creality K1C with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla
- Creality K1C with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-carbon-fiber
- Creality K1C with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-cf
- Creality K1C with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-classic
- Creality K1C with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-galaxy
- Creality K1C with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-glow-in-the-dark
- Creality K1C with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-matte
- Creality K1C with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-matte-dual-color
- Creality K1C with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-rainbow
- Creality K1C with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-silk
- Creality K1C with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-transparent-rainbow
- Creality K1C with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-twinkling
- Creality K1C with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-wood
- Creality K1C with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-meta
- Creality K1C with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-plus
- Creality K1C with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pla-plus-2-0
- Creality K1C with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pp
- Creality K1C with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pva
- Creality K1C with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/pvb
- Creality K1C with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/real-wood-fiber-pla
- Creality K1C with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/silk-2-0
- Creality K1C with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/silk-pla-plus
- Creality K1C with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/silk-pla-plus-dual-color
- Creality K1C with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/silk-pla-plus-four-color
- Creality K1C with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/silk-pla-plus-rainbow
- Creality K1C with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/silk-pla-plus-tri-color
- Creality K1C with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/temperature-color-change-pla
- Creality K1C with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/tpu
- Creality K1C with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/tpu-silk
- Creality K1C with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/tpu90a
- Creality K1C with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/tpu95a
- Creality K1C with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/transparent-clear-pla
- Creality K1C with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/creality-k1c/sunlu/upgrade-pla
- Elegoo Centauri Carbon with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/90a-flexible-peba
- Elegoo Centauri Carbon with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/basic-matte-pla
- Elegoo Centauri Carbon with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/basic-silk-pla
- Elegoo Centauri Carbon with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/conductive-pla
- Elegoo Centauri Carbon with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/crystal-transparent-pla
- Elegoo Centauri Carbon with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/dual-color-matte-pla
- Elegoo Centauri Carbon with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/dual-color-silk-pla
- Elegoo Centauri Carbon with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Elegoo Centauri Carbon with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/glow-pla
- Elegoo Centauri Carbon with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/glow-tpu
- Elegoo Centauri Carbon with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/high-speed-pla
- Elegoo Centauri Carbon with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/marble-pla
- Elegoo Centauri Carbon with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/matte-pla
- Elegoo Centauri Carbon with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/peba
- Elegoo Centauri Carbon with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/petg
- Elegoo Centauri Carbon with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/pla
- Elegoo Centauri Carbon with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/pla-cf
- Elegoo Centauri Carbon with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/pla-metal
- Elegoo Centauri Carbon with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/quad-color-silk-pla
- Elegoo Centauri Carbon with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/rainbow-silk-pla
- Elegoo Centauri Carbon with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/s-series-silk-pla
- Elegoo Centauri Carbon with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/shiny-glitter-silk-pla
- Elegoo Centauri Carbon with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/shiny-gradient-silk-pla
- Elegoo Centauri Carbon with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/silk-gf-pla
- Elegoo Centauri Carbon with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/silk-pla
- Elegoo Centauri Carbon with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/temperature-color-change-pla
- Elegoo Centauri Carbon with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/tpu
- Elegoo Centauri Carbon with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/transparent-pla
- Elegoo Centauri Carbon with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/triple-color-matte-pla
- Elegoo Centauri Carbon with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/triple-color-silk-pla
- Elegoo Centauri Carbon with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/uv-color-change-pla
- Elegoo Centauri Carbon with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/amolen/wood-pla
- Elegoo Centauri Carbon with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/abs
- Elegoo Centauri Carbon with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/asa
- Elegoo Centauri Carbon with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/high-speed-pla
- Elegoo Centauri Carbon with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/petg
- Elegoo Centauri Carbon with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-basic
- Elegoo Centauri Carbon with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-galaxy
- Elegoo Centauri Carbon with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-marble
- Elegoo Centauri Carbon with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-matte
- Elegoo Centauri Carbon with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-metal
- Elegoo Centauri Carbon with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-plus
- Elegoo Centauri Carbon with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-silk
- Elegoo Centauri Carbon with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-silk-dual-tricolor
- Elegoo Centauri Carbon with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/pla-special
- Elegoo Centauri Carbon with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/tpu
- Elegoo Centauri Carbon with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/anycubic/translucent-petg
- Elegoo Centauri Carbon with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/abs
- Elegoo Centauri Carbon with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/abs-gf
- Elegoo Centauri Carbon with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/asa
- Elegoo Centauri Carbon with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/asa-aero
- Elegoo Centauri Carbon with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/asa-cf
- Elegoo Centauri Carbon with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/matte-asa-cf
- Elegoo Centauri Carbon with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pa12-cf
- Elegoo Centauri Carbon with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pa6-cf
- Elegoo Centauri Carbon with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pa6-gf
- Elegoo Centauri Carbon with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/paht-cf
- Elegoo Centauri Carbon with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pc
- Elegoo Centauri Carbon with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pc-fr
- Elegoo Centauri Carbon with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pet-cf
- Elegoo Centauri Carbon with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/petg-basic
- Elegoo Centauri Carbon with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/petg-hf
- Elegoo Centauri Carbon with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/petg-matte
- Elegoo Centauri Carbon with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/petg-translucent
- Elegoo Centauri Carbon with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/petg-cf
- Elegoo Centauri Carbon with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla
- Elegoo Centauri Carbon with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-aero
- Elegoo Centauri Carbon with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-basic
- Elegoo Centauri Carbon with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-basic-gradient
- Elegoo Centauri Carbon with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-galaxy
- Elegoo Centauri Carbon with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-glow
- Elegoo Centauri Carbon with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-lite
- Elegoo Centauri Carbon with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-marble
- Elegoo Centauri Carbon with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-matte
- Elegoo Centauri Carbon with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-metal
- Elegoo Centauri Carbon with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-pure
- Elegoo Centauri Carbon with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-silk-dual-color
- Elegoo Centauri Carbon with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-silk-multi-color
- Elegoo Centauri Carbon with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-silk-plus
- Elegoo Centauri Carbon with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-sparkle
- Elegoo Centauri Carbon with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-tough-plus
- Elegoo Centauri Carbon with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-translucent
- Elegoo Centauri Carbon with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-wood
- Elegoo Centauri Carbon with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pla-cf
- Elegoo Centauri Carbon with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/ppa-cf
- Elegoo Centauri Carbon with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pps-cf
- Elegoo Centauri Carbon with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/pva
- Elegoo Centauri Carbon with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/silk-pla
- Elegoo Centauri Carbon with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/support-for-abs
- Elegoo Centauri Carbon with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/support-for-pa-pet
- Elegoo Centauri Carbon with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/support-for-pla
- Elegoo Centauri Carbon with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/support-for-pla-petg
- Elegoo Centauri Carbon with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/tpu
- Elegoo Centauri Carbon with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/tpu-85a
- Elegoo Centauri Carbon with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/tpu-90a
- Elegoo Centauri Carbon with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/tpu-95a-hf
- Elegoo Centauri Carbon with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/bambu-lab/tpu-for-ams
- Elegoo Centauri Carbon with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/asa
- Elegoo Centauri Carbon with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/cpe
- Elegoo Centauri Carbon with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/economy-pla
- Elegoo Centauri Carbon with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/glow-pha
- Elegoo Centauri Carbon with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/high-speed-pla
- Elegoo Centauri Carbon with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/lw-ht-pla
- Elegoo Centauri Carbon with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/matte-pla
- Elegoo Centauri Carbon with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/petg
- Elegoo Centauri Carbon with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/pha
- Elegoo Centauri Carbon with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/pha-pla
- Elegoo Centauri Carbon with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/pla
- Elegoo Centauri Carbon with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/r-semi-pla
- Elegoo Centauri Carbon with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/semi-pla
- Elegoo Centauri Carbon with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/silk-pla
- Elegoo Centauri Carbon with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/stonefill-pla
- Elegoo Centauri Carbon with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/colorfabb/tpu
- Elegoo Centauri Carbon with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/95a-tpu
- Elegoo Centauri Carbon with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/abs
- Elegoo Centauri Carbon with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/cr-petg
- Elegoo Centauri Carbon with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/cr-pla-carbon
- Elegoo Centauri Carbon with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/ender-fast-pla
- Elegoo Centauri Carbon with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/ender-pla-plus
- Elegoo Centauri Carbon with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hp-asa
- Elegoo Centauri Carbon with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hp-tpu
- Elegoo Centauri Carbon with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-abs
- Elegoo Centauri Carbon with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-luminous-pla
- Elegoo Centauri Carbon with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-pa6-cf
- Elegoo Centauri Carbon with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-pc
- Elegoo Centauri Carbon with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-petg
- Elegoo Centauri Carbon with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-pla
- Elegoo Centauri Carbon with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-pla-cf
- Elegoo Centauri Carbon with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/hyper-rainbow-pla
- Elegoo Centauri Carbon with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/petg
- Elegoo Centauri Carbon with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/pla
- Elegoo Centauri Carbon with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/pla-cf
- Elegoo Centauri Carbon with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/pla-cr-wood
- Elegoo Centauri Carbon with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/ppa-cf
- Elegoo Centauri Carbon with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/silk-pla
- Elegoo Centauri Carbon with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/soleyin-basic-petg
- Elegoo Centauri Carbon with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/creality/soleyin-ultra-pla
- Elegoo Centauri Carbon with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/abs
- Elegoo Centauri Carbon with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/asa
- Elegoo Centauri Carbon with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/galaxy-pla
- Elegoo Centauri Carbon with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/paht-cf
- Elegoo Centauri Carbon with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pc
- Elegoo Centauri Carbon with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pc-fr
- Elegoo Centauri Carbon with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pet-cf
- Elegoo Centauri Carbon with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/petg
- Elegoo Centauri Carbon with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/petg-pro
- Elegoo Centauri Carbon with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/petg-translucent
- Elegoo Centauri Carbon with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/petg-cf
- Elegoo Centauri Carbon with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/petg-gf
- Elegoo Centauri Carbon with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla
- Elegoo Centauri Carbon with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-basic
- Elegoo Centauri Carbon with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-glow
- Elegoo Centauri Carbon with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-marble
- Elegoo Centauri Carbon with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-matte
- Elegoo Centauri Carbon with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-metallic
- Elegoo Centauri Carbon with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-plus
- Elegoo Centauri Carbon with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-pro
- Elegoo Centauri Carbon with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-sparkle
- Elegoo Centauri Carbon with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-wood
- Elegoo Centauri Carbon with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/pla-cf
- Elegoo Centauri Carbon with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/rapid-petg
- Elegoo Centauri Carbon with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/rapid-pla-plus
- Elegoo Centauri Carbon with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/rapid-tpu-95a
- Elegoo Centauri Carbon with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/silk-pla
- Elegoo Centauri Carbon with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/elegoo/tpu-95a
- Elegoo Centauri Carbon with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/abs
- Elegoo Centauri Carbon with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/abs-high-speed
- Elegoo Centauri Carbon with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/abs-cf
- Elegoo Centauri Carbon with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/abs-gf
- Elegoo Centauri Carbon with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/abs-pc
- Elegoo Centauri Carbon with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/abs-plus
- Elegoo Centauri Carbon with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/asa
- Elegoo Centauri Carbon with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/asa-high-speed
- Elegoo Centauri Carbon with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/asa-light-weight
- Elegoo Centauri Carbon with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/asa-cf
- Elegoo Centauri Carbon with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/asa-gf
- Elegoo Centauri Carbon with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pa12-nylon
- Elegoo Centauri Carbon with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pa12-cf
- Elegoo Centauri Carbon with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pa12-gf
- Elegoo Centauri Carbon with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pa6-cf
- Elegoo Centauri Carbon with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pa6-gf
- Elegoo Centauri Carbon with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/petg
- Elegoo Centauri Carbon with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/petg-cf
- Elegoo Centauri Carbon with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla
- Elegoo Centauri Carbon with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-burnt-titanium
- Elegoo Centauri Carbon with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-burnt-titanium-dual-color
- Elegoo Centauri Carbon with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-burnt-titanium-rainbow
- Elegoo Centauri Carbon with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-burnt-titanium-triple-color
- Elegoo Centauri Carbon with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-galaxy
- Elegoo Centauri Carbon with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-high-speed
- Elegoo Centauri Carbon with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-light-weight
- Elegoo Centauri Carbon with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-luminous
- Elegoo Centauri Carbon with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-marble
- Elegoo Centauri Carbon with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte
- Elegoo Centauri Carbon with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte-dual-color
- Elegoo Centauri Carbon with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte-gradient
- Elegoo Centauri Carbon with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte-high-speed
- Elegoo Centauri Carbon with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte-high-speed-gradient-multi-color
- Elegoo Centauri Carbon with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte-high-speed-rock-rainbow
- Elegoo Centauri Carbon with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte-high-speed-triple-color
- Elegoo Centauri Carbon with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-matte-rainbow
- Elegoo Centauri Carbon with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-metallic
- Elegoo Centauri Carbon with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-rainbow
- Elegoo Centauri Carbon with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-silk
- Elegoo Centauri Carbon with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-silk-high-speed-dual-color
- Elegoo Centauri Carbon with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-silk-high-speed-quadruple
- Elegoo Centauri Carbon with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-silk-high-speed-triple-color
- Elegoo Centauri Carbon with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-silk-rainbow
- Elegoo Centauri Carbon with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-ultra-silk
- Elegoo Centauri Carbon with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-wood
- Elegoo Centauri Carbon with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-cf
- Elegoo Centauri Carbon with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-plus
- Elegoo Centauri Carbon with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pla-plus-high-speed
- Elegoo Centauri Carbon with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pp
- Elegoo Centauri Carbon with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/pp-cf
- Elegoo Centauri Carbon with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/tpu
- Elegoo Centauri Carbon with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/tpu-90a
- Elegoo Centauri Carbon with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/tpu-high-speed
- Elegoo Centauri Carbon with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/eryone/tpu-rainbow
- Elegoo Centauri Carbon with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/abs-plus
- Elegoo Centauri Carbon with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/abs-pluscf
- Elegoo Centauri Carbon with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/abs-plushs
- Elegoo Centauri Carbon with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/asa-plus
- Elegoo Centauri Carbon with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/dark-twinkling-pla-magic
- Elegoo Centauri Carbon with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/epaht-cf
- Elegoo Centauri Carbon with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/epla-plushs
- Elegoo Centauri Carbon with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/esun-petg-matte
- Elegoo Centauri Carbon with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/mystic-silk-pla
- Elegoo Centauri Carbon with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pa12-cf
- Elegoo Centauri Carbon with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pa6-pa
- Elegoo Centauri Carbon with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pa6-pa-cf
- Elegoo Centauri Carbon with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/peak-pla
- Elegoo Centauri Carbon with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pet
- Elegoo Centauri Carbon with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/petg
- Elegoo Centauri Carbon with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/petg-basic
- Elegoo Centauri Carbon with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/petg-matte
- Elegoo Centauri Carbon with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/petg-pluscf
- Elegoo Centauri Carbon with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/petg-plushs
- Elegoo Centauri Carbon with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-basic
- Elegoo Centauri Carbon with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-cf
- Elegoo Centauri Carbon with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-chameleon
- Elegoo Centauri Carbon with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-hs
- Elegoo Centauri Carbon with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-lite
- Elegoo Centauri Carbon with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-luminous
- Elegoo Centauri Carbon with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-luminous-rainbow
- Elegoo Centauri Carbon with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-lw
- Elegoo Centauri Carbon with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-marble
- Elegoo Centauri Carbon with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-matte
- Elegoo Centauri Carbon with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-metal
- Elegoo Centauri Carbon with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-silk
- Elegoo Centauri Carbon with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-silk-candy
- Elegoo Centauri Carbon with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-silk-magic
- Elegoo Centauri Carbon with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-silk-metal
- Elegoo Centauri Carbon with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-silk-rainbow
- Elegoo Centauri Carbon with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-st
- Elegoo Centauri Carbon with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-stars
- Elegoo Centauri Carbon with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-wood
- Elegoo Centauri Carbon with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-plus
- Elegoo Centauri Carbon with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pla-plus-cmyk
- Elegoo Centauri Carbon with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/pva
- Elegoo Centauri Carbon with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/silk-petg
- Elegoo Centauri Carbon with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/tpe-83a
- Elegoo Centauri Carbon with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/tpu-95a
- Elegoo Centauri Carbon with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/tpu-lw
- Elegoo Centauri Carbon with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/esun-3d/uv-change-pla-uv-color-change
- Elegoo Centauri Carbon with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/basic-pla
- Elegoo Centauri Carbon with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/biofusion-pla
- Elegoo Centauri Carbon with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/biofusion-silk-pla
- Elegoo Centauri Carbon with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/durapro-abs
- Elegoo Centauri Carbon with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/durapro-asa
- Elegoo Centauri Carbon with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/durapro-cf-pa12
- Elegoo Centauri Carbon with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/durapro-matte-asa
- Elegoo Centauri Carbon with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/durapro-pa12
- Elegoo Centauri Carbon with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/durapro-pbt-pc
- Elegoo Centauri Carbon with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/flax-pla
- Elegoo Centauri Carbon with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/flex-hard-cf-tpu
- Elegoo Centauri Carbon with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/flex-hard-tpu
- Elegoo Centauri Carbon with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/flex-medium-tpu
- Elegoo Centauri Carbon with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/flex-semisoft-tpu
- Elegoo Centauri Carbon with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/glow-petg
- Elegoo Centauri Carbon with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/greentec-matte-pla
- Elegoo Centauri Carbon with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/greentec-pla
- Elegoo Centauri Carbon with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/pctg
- Elegoo Centauri Carbon with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/pearl-pla
- Elegoo Centauri Carbon with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/petg
- Elegoo Centauri Carbon with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/pla-nx2-matt
- Elegoo Centauri Carbon with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/extrudr/wood-pla
- Elegoo Centauri Carbon with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/fillamentum/asa-extrafill
- Elegoo Centauri Carbon with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/fillamentum/cpe-hg100
- Elegoo Centauri Carbon with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/fillamentum/pla-crystal-clear
- Elegoo Centauri Carbon with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/fillamentum/pla-extrafill
- Elegoo Centauri Carbon with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/abs
- Elegoo Centauri Carbon with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/glow-abs
- Elegoo Centauri Carbon with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/glow-pla
- Elegoo Centauri Carbon with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/metallic-finish-pla
- Elegoo Centauri Carbon with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/petg
- Elegoo Centauri Carbon with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/pla
- Elegoo Centauri Carbon with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/pla-basic
- Elegoo Centauri Carbon with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/pla-cf
- Elegoo Centauri Carbon with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/pla-matte
- Elegoo Centauri Carbon with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/pla-max
- Elegoo Centauri Carbon with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/pla-metal
- Elegoo Centauri Carbon with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/pla-pro
- Elegoo Centauri Carbon with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/silk-pla
- Elegoo Centauri Carbon with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/tpu
- Elegoo Centauri Carbon with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/transparent-pla
- Elegoo Centauri Carbon with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/uv-color-changing-pla
- Elegoo Centauri Carbon with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/hatchbox/wood-pla
- Elegoo Centauri Carbon with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/abs
- Elegoo Centauri Carbon with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/carbon-fiber-nylon
- Elegoo Centauri Carbon with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/galaxy-pla
- Elegoo Centauri Carbon with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/glow-abs
- Elegoo Centauri Carbon with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/high-speed-pla-plus
- Elegoo Centauri Carbon with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/petg-plus
- Elegoo Centauri Carbon with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla
- Elegoo Centauri Carbon with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla-basic
- Elegoo Centauri Carbon with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla-chameleon
- Elegoo Centauri Carbon with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla-glitter-rainbow
- Elegoo Centauri Carbon with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla-matte
- Elegoo Centauri Carbon with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla-mystic-silk
- Elegoo Centauri Carbon with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla-silk-rainbow
- Elegoo Centauri Carbon with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/pla-plus
- Elegoo Centauri Carbon with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/silk-pla
- Elegoo Centauri Carbon with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/inland/tpu
- Elegoo Centauri Carbon with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/jayo/high-speed-matte-pla
- Elegoo Centauri Carbon with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/jayo/matte-pla
- Elegoo Centauri Carbon with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/jayo/petg
- Elegoo Centauri Carbon with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/jayo/pla
- Elegoo Centauri Carbon with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/jayo/pla-plus
- Elegoo Centauri Carbon with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/jayo/silk-pla
- Elegoo Centauri Carbon with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/jayo/tpu
- Elegoo Centauri Carbon with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/abs
- Elegoo Centauri Carbon with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/glow-pla
- Elegoo Centauri Carbon with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/high-speed-petg
- Elegoo Centauri Carbon with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/high-speed-pla
- Elegoo Centauri Carbon with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/matte-pla
- Elegoo Centauri Carbon with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/petg
- Elegoo Centauri Carbon with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/petg-cf
- Elegoo Centauri Carbon with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/pla
- Elegoo Centauri Carbon with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/pla-basic
- Elegoo Centauri Carbon with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/pla-cf
- Elegoo Centauri Carbon with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/silk-pla
- Elegoo Centauri Carbon with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/kingroon/tpu
- Elegoo Centauri Carbon with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/abs
- Elegoo Centauri Carbon with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/abs-basic
- Elegoo Centauri Carbon with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/asa
- Elegoo Centauri Carbon with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/asa-basic
- Elegoo Centauri Carbon with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/easy-nylon
- Elegoo Centauri Carbon with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/glow-abs
- Elegoo Centauri Carbon with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/glow-pla
- Elegoo Centauri Carbon with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/high-speed-petg
- Elegoo Centauri Carbon with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/high-speed-pla
- Elegoo Centauri Carbon with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/high-speed-tpu
- Elegoo Centauri Carbon with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/luminous-high-speed-glow-tpu
- Elegoo Centauri Carbon with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/matte-pla
- Elegoo Centauri Carbon with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pc
- Elegoo Centauri Carbon with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pc-professional
- Elegoo Centauri Carbon with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/petg
- Elegoo Centauri Carbon with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/petg-basic
- Elegoo Centauri Carbon with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/petg-refill
- Elegoo Centauri Carbon with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla
- Elegoo Centauri Carbon with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-air
- Elegoo Centauri Carbon with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-cf
- Elegoo Centauri Carbon with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-cream
- Elegoo Centauri Carbon with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-easy
- Elegoo Centauri Carbon with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-easy-glow
- Elegoo Centauri Carbon with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-plus
- Elegoo Centauri Carbon with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-professional
- Elegoo Centauri Carbon with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-refill
- Elegoo Centauri Carbon with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-rock
- Elegoo Centauri Carbon with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-super
- Elegoo Centauri Carbon with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/pla-turbo-rapid
- Elegoo Centauri Carbon with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/shimmer-pla
- Elegoo Centauri Carbon with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/silk-pla
- Elegoo Centauri Carbon with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/overture/tpu
- Elegoo Centauri Carbon with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/abs
- Elegoo Centauri Carbon with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/asa
- Elegoo Centauri Carbon with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/cpe
- Elegoo Centauri Carbon with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/creator-special-edition-pla
- Elegoo Centauri Carbon with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/draft-pla
- Elegoo Centauri Carbon with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/dual-panchroma-matte-pla
- Elegoo Centauri Carbon with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/for-production-matte-pla
- Elegoo Centauri Carbon with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/glow-pla
- Elegoo Centauri Carbon with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/gradient-panchroma-pla
- Elegoo Centauri Carbon with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/ht-pla-pro
- Elegoo Centauri Carbon with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/ht-pla
- Elegoo Centauri Carbon with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/ht-pla-gf
- Elegoo Centauri Carbon with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/lw-polylite-pla
- Elegoo Centauri Carbon with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/metallic-polylite-pla
- Elegoo Centauri Carbon with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/metallic-polylite-silk-abs
- Elegoo Centauri Carbon with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/metallic-polylite-silk-pla
- Elegoo Centauri Carbon with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/muted-panchroma-matte-pla
- Elegoo Centauri Carbon with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/neon-panchroma-pla
- Elegoo Centauri Carbon with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pa12-cf
- Elegoo Centauri Carbon with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pa6-cf
- Elegoo Centauri Carbon with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pa6-gf
- Elegoo Centauri Carbon with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/panchroma-cope
- Elegoo Centauri Carbon with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/panchroma-glow-pla
- Elegoo Centauri Carbon with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/panchroma-pla
- Elegoo Centauri Carbon with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/panchroma-silk-pla
- Elegoo Centauri Carbon with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pc
- Elegoo Centauri Carbon with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pc-abs
- Elegoo Centauri Carbon with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pc-pbt
- Elegoo Centauri Carbon with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pet-cf
- Elegoo Centauri Carbon with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/petg
- Elegoo Centauri Carbon with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/petg-cf
- Elegoo Centauri Carbon with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pla
- Elegoo Centauri Carbon with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pla-cf
- Elegoo Centauri Carbon with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pla-polycast
- Elegoo Centauri Carbon with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polyflex-95-hf-high-speed-tpu
- Elegoo Centauri Carbon with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polyflex-tpu
- Elegoo Centauri Carbon with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polylite-abs
- Elegoo Centauri Carbon with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polylite-asa
- Elegoo Centauri Carbon with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polylite-pc
- Elegoo Centauri Carbon with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polylite-petg
- Elegoo Centauri Carbon with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polylite-pla
- Elegoo Centauri Carbon with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polylite-pla-cf
- Elegoo Centauri Carbon with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polymaker-pla-pro
- Elegoo Centauri Carbon with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polymax-pc
- Elegoo Centauri Carbon with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polymax-petg
- Elegoo Centauri Carbon with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polymax-pla
- Elegoo Centauri Carbon with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polymide-copa-pa6
- Elegoo Centauri Carbon with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polysmooth
- Elegoo Centauri Carbon with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polysonic-pla
- Elegoo Centauri Carbon with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/polysupport-for-pla
- Elegoo Centauri Carbon with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pps-cf
- Elegoo Centauri Carbon with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pva
- Elegoo Centauri Carbon with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pva-polydissolve-s1
- Elegoo Centauri Carbon with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pva-polysupport-for-pa12
- Elegoo Centauri Carbon with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/pvb
- Elegoo Centauri Carbon with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/satin-panchroma-pla
- Elegoo Centauri Carbon with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/silk-abs
- Elegoo Centauri Carbon with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/silk-pla
- Elegoo Centauri Carbon with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/polymaker/wood-pla
- Elegoo Centauri Carbon with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/basic-pla
- Elegoo Centauri Carbon with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/conductive-pla
- Elegoo Centauri Carbon with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/fiber-ht-matte-pla
- Elegoo Centauri Carbon with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/fluorescent-pla
- Elegoo Centauri Carbon with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/glitter-petg
- Elegoo Centauri Carbon with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/glitter-pla
- Elegoo Centauri Carbon with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/glow-pla
- Elegoo Centauri Carbon with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/high-speed-pla
- Elegoo Centauri Carbon with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/iron-metal-composite-pla
- Elegoo Centauri Carbon with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/marble-pla
- Elegoo Centauri Carbon with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/matte-pla
- Elegoo Centauri Carbon with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/metal-composite-pla
- Elegoo Centauri Carbon with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/metallic-petg
- Elegoo Centauri Carbon with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/metallic-pla
- Elegoo Centauri Carbon with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/multicolor-pla
- Elegoo Centauri Carbon with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/nebula-pla
- Elegoo Centauri Carbon with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/opaque-pla
- Elegoo Centauri Carbon with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/pearl-pla
- Elegoo Centauri Carbon with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/petg
- Elegoo Centauri Carbon with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/petg-cf
- Elegoo Centauri Carbon with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/pla
- Elegoo Centauri Carbon with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/pla-cf
- Elegoo Centauri Carbon with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/pla-green-glow-in-the-dark
- Elegoo Centauri Carbon with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/recycled-petg
- Elegoo Centauri Carbon with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/recycled-pla
- Elegoo Centauri Carbon with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/satin-pla
- Elegoo Centauri Carbon with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/silk-petg
- Elegoo Centauri Carbon with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/silk-pla
- Elegoo Centauri Carbon with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/simply-petg
- Elegoo Centauri Carbon with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/stainless-steel-metal-composite-pla
- Elegoo Centauri Carbon with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/static-dissipative-carbon-fiber-pla
- Elegoo Centauri Carbon with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/static-dissipative-petg
- Elegoo Centauri Carbon with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/static-dissipative-pla
- Elegoo Centauri Carbon with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/steel-metal-composite-pla
- Elegoo Centauri Carbon with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/still-colorful-recycled-pla
- Elegoo Centauri Carbon with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/thermochromic-pla
- Elegoo Centauri Carbon with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/tpe
- Elegoo Centauri Carbon with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/tpu
- Elegoo Centauri Carbon with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/translucent-petg
- Elegoo Centauri Carbon with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/protopasta/translucent-pla
- Elegoo Centauri Carbon with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/asa
- Elegoo Centauri Carbon with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/blend-silk-pla
- Elegoo Centauri Carbon with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/matte-petg
- Elegoo Centauri Carbon with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/mystic-premium-pla
- Elegoo Centauri Carbon with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pa11-cf
- Elegoo Centauri Carbon with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pc
- Elegoo Centauri Carbon with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pc-blend
- Elegoo Centauri Carbon with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pc-cf
- Elegoo Centauri Carbon with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pei
- Elegoo Centauri Carbon with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pei-1010
- Elegoo Centauri Carbon with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/petg
- Elegoo Centauri Carbon with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/petg-cf
- Elegoo Centauri Carbon with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/petg-magnetite
- Elegoo Centauri Carbon with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/petg-tungsten
- Elegoo Centauri Carbon with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/petg-v0
- Elegoo Centauri Carbon with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pla
- Elegoo Centauri Carbon with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pla-recycled
- Elegoo Centauri Carbon with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pla-woodfill
- Elegoo Centauri Carbon with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pp-cf
- Elegoo Centauri Carbon with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pp-gf
- Elegoo Centauri Carbon with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/pvb
- Elegoo Centauri Carbon with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/rpla
- Elegoo Centauri Carbon with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/prusament/tpu-95a
- Elegoo Centauri Carbon with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-abs-ht-hf
- Elegoo Centauri Carbon with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-abs-cf-core
- Elegoo Centauri Carbon with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-abs-gf
- Elegoo Centauri Carbon with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-asa-gf
- Elegoo Centauri Carbon with Siraya Tech Fibreheart PET-CF: The listed nozzle maximum of 320 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-pet-cf
- Elegoo Centauri Carbon with Siraya Tech Fibreheart PET-GF: The listed nozzle maximum of 320 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-pet-gf
- Elegoo Centauri Carbon with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-petg-cf-pro
- Elegoo Centauri Carbon with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-ppa
- Elegoo Centauri Carbon with Siraya Tech Fibreheart PPA-CF: The listed nozzle maximum of 320 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-ppa-cf
- Elegoo Centauri Carbon with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle maximum of 320 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-ppa-cf-core
- Elegoo Centauri Carbon with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/fibreheart-tpu-gf
- Elegoo Centauri Carbon with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/flex-tpu-64d
- Elegoo Centauri Carbon with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/flex-tpu-85a
- Elegoo Centauri Carbon with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/flex-tpu-air-85a
- Elegoo Centauri Carbon with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/rebound-peba-85a
- Elegoo Centauri Carbon with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/rebound-peba-95a
- Elegoo Centauri Carbon with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/rebound-peba-air-95a
- Elegoo Centauri Carbon with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/roamr-tpu-air-hr-80a
- Elegoo Centauri Carbon with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/siraya-tech/roamr-tpu-air-hr-85a
- Elegoo Centauri Carbon with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/95a-high-speed-tpu
- Elegoo Centauri Carbon with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/abs
- Elegoo Centauri Carbon with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/abs-fr
- Elegoo Centauri Carbon with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/apla
- Elegoo Centauri Carbon with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/asa
- Elegoo Centauri Carbon with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/fluorescent-pla
- Elegoo Centauri Carbon with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/glow-petg
- Elegoo Centauri Carbon with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/glow-pla
- Elegoo Centauri Carbon with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/high-speed-abs
- Elegoo Centauri Carbon with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/high-speed-matte-petg
- Elegoo Centauri Carbon with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/high-speed-matte-pla
- Elegoo Centauri Carbon with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/high-speed-petg
- Elegoo Centauri Carbon with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/high-speed-pla
- Elegoo Centauri Carbon with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/high-speed-pla-marble
- Elegoo Centauri Carbon with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/high-speed-pla-plus
- Elegoo Centauri Carbon with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/luminous-glow-in-the-dark-petg
- Elegoo Centauri Carbon with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/matte-petg-cf
- Elegoo Centauri Carbon with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pa12-cf
- Elegoo Centauri Carbon with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pa6-easy-pa
- Elegoo Centauri Carbon with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pa6-cf
- Elegoo Centauri Carbon with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pa6-gf
- Elegoo Centauri Carbon with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pc
- Elegoo Centauri Carbon with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pc-abs
- Elegoo Centauri Carbon with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pcl
- Elegoo Centauri Carbon with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/peek
- Elegoo Centauri Carbon with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/petg
- Elegoo Centauri Carbon with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/petg-2-0
- Elegoo Centauri Carbon with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/petg-carbon-fiber
- Elegoo Centauri Carbon with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/petg-glow-in-the-dark-filament
- Elegoo Centauri Carbon with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla
- Elegoo Centauri Carbon with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-carbon-fiber
- Elegoo Centauri Carbon with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-cf
- Elegoo Centauri Carbon with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-classic
- Elegoo Centauri Carbon with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-galaxy
- Elegoo Centauri Carbon with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-glow-in-the-dark
- Elegoo Centauri Carbon with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-matte
- Elegoo Centauri Carbon with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-matte-dual-color
- Elegoo Centauri Carbon with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-rainbow
- Elegoo Centauri Carbon with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-silk
- Elegoo Centauri Carbon with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-transparent-rainbow
- Elegoo Centauri Carbon with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-twinkling
- Elegoo Centauri Carbon with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-wood
- Elegoo Centauri Carbon with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-meta
- Elegoo Centauri Carbon with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-plus
- Elegoo Centauri Carbon with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pla-plus-2-0
- Elegoo Centauri Carbon with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pp
- Elegoo Centauri Carbon with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pva
- Elegoo Centauri Carbon with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/pvb
- Elegoo Centauri Carbon with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/real-wood-fiber-pla
- Elegoo Centauri Carbon with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/silk-2-0
- Elegoo Centauri Carbon with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/silk-pla-plus
- Elegoo Centauri Carbon with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/silk-pla-plus-dual-color
- Elegoo Centauri Carbon with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/silk-pla-plus-four-color
- Elegoo Centauri Carbon with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/silk-pla-plus-rainbow
- Elegoo Centauri Carbon with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/silk-pla-plus-tri-color
- Elegoo Centauri Carbon with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/temperature-color-change-pla
- Elegoo Centauri Carbon with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/tpu
- Elegoo Centauri Carbon with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/tpu-silk
- Elegoo Centauri Carbon with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/tpu90a
- Elegoo Centauri Carbon with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/tpu95a
- Elegoo Centauri Carbon with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/transparent-clear-pla
- Elegoo Centauri Carbon with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/elegoo-centauri-carbon/sunlu/upgrade-pla
- Anycubic Kobra 3 Max with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/90a-flexible-peba
- Anycubic Kobra 3 Max with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/basic-matte-pla
- Anycubic Kobra 3 Max with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/basic-silk-pla
- Anycubic Kobra 3 Max with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/conductive-pla
- Anycubic Kobra 3 Max with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/crystal-transparent-pla
- Anycubic Kobra 3 Max with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/dual-color-matte-pla
- Anycubic Kobra 3 Max with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/dual-color-silk-pla
- Anycubic Kobra 3 Max with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Anycubic Kobra 3 Max with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/glow-pla
- Anycubic Kobra 3 Max with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/glow-tpu
- Anycubic Kobra 3 Max with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/high-speed-pla
- Anycubic Kobra 3 Max with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/marble-pla
- Anycubic Kobra 3 Max with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/matte-pla
- Anycubic Kobra 3 Max with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/peba
- Anycubic Kobra 3 Max with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/petg
- Anycubic Kobra 3 Max with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/pla
- Anycubic Kobra 3 Max with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/pla-cf
- Anycubic Kobra 3 Max with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/pla-metal
- Anycubic Kobra 3 Max with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/quad-color-silk-pla
- Anycubic Kobra 3 Max with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/rainbow-silk-pla
- Anycubic Kobra 3 Max with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/s-series-silk-pla
- Anycubic Kobra 3 Max with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/shiny-glitter-silk-pla
- Anycubic Kobra 3 Max with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/shiny-gradient-silk-pla
- Anycubic Kobra 3 Max with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/silk-gf-pla
- Anycubic Kobra 3 Max with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/silk-pla
- Anycubic Kobra 3 Max with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/temperature-color-change-pla
- Anycubic Kobra 3 Max with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/tpu
- Anycubic Kobra 3 Max with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/transparent-pla
- Anycubic Kobra 3 Max with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/triple-color-matte-pla
- Anycubic Kobra 3 Max with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/triple-color-silk-pla
- Anycubic Kobra 3 Max with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/uv-color-change-pla
- Anycubic Kobra 3 Max with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/amolen/wood-pla
- Anycubic Kobra 3 Max with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/abs
- Anycubic Kobra 3 Max with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/asa
- Anycubic Kobra 3 Max with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/high-speed-pla
- Anycubic Kobra 3 Max with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/petg
- Anycubic Kobra 3 Max with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-basic
- Anycubic Kobra 3 Max with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-galaxy
- Anycubic Kobra 3 Max with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-marble
- Anycubic Kobra 3 Max with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-matte
- Anycubic Kobra 3 Max with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-metal
- Anycubic Kobra 3 Max with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-plus
- Anycubic Kobra 3 Max with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-silk
- Anycubic Kobra 3 Max with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-silk-dual-tricolor
- Anycubic Kobra 3 Max with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/pla-special
- Anycubic Kobra 3 Max with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/tpu
- Anycubic Kobra 3 Max with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/anycubic/translucent-petg
- Anycubic Kobra 3 Max with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/abs
- Anycubic Kobra 3 Max with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/abs-gf
- Anycubic Kobra 3 Max with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/asa
- Anycubic Kobra 3 Max with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/asa-aero
- Anycubic Kobra 3 Max with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/asa-cf
- Anycubic Kobra 3 Max with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/matte-asa-cf
- Anycubic Kobra 3 Max with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pa12-cf
- Anycubic Kobra 3 Max with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pa6-cf
- Anycubic Kobra 3 Max with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pa6-gf
- Anycubic Kobra 3 Max with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/paht-cf
- Anycubic Kobra 3 Max with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pc
- Anycubic Kobra 3 Max with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pc-fr
- Anycubic Kobra 3 Max with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pet-cf
- Anycubic Kobra 3 Max with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/petg-basic
- Anycubic Kobra 3 Max with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/petg-hf
- Anycubic Kobra 3 Max with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/petg-matte
- Anycubic Kobra 3 Max with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/petg-translucent
- Anycubic Kobra 3 Max with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/petg-cf
- Anycubic Kobra 3 Max with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla
- Anycubic Kobra 3 Max with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-aero
- Anycubic Kobra 3 Max with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-basic
- Anycubic Kobra 3 Max with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-basic-gradient
- Anycubic Kobra 3 Max with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-galaxy
- Anycubic Kobra 3 Max with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-glow
- Anycubic Kobra 3 Max with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-lite
- Anycubic Kobra 3 Max with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-marble
- Anycubic Kobra 3 Max with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-matte
- Anycubic Kobra 3 Max with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-metal
- Anycubic Kobra 3 Max with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-pure
- Anycubic Kobra 3 Max with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-silk-dual-color
- Anycubic Kobra 3 Max with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-silk-multi-color
- Anycubic Kobra 3 Max with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-silk-plus
- Anycubic Kobra 3 Max with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-sparkle
- Anycubic Kobra 3 Max with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-tough-plus
- Anycubic Kobra 3 Max with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-translucent
- Anycubic Kobra 3 Max with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-wood
- Anycubic Kobra 3 Max with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pla-cf
- Anycubic Kobra 3 Max with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/ppa-cf
- Anycubic Kobra 3 Max with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pps-cf
- Anycubic Kobra 3 Max with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/pva
- Anycubic Kobra 3 Max with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/silk-pla
- Anycubic Kobra 3 Max with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/support-for-abs
- Anycubic Kobra 3 Max with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/support-for-pa-pet
- Anycubic Kobra 3 Max with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/support-for-pla
- Anycubic Kobra 3 Max with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/support-for-pla-petg
- Anycubic Kobra 3 Max with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/tpu
- Anycubic Kobra 3 Max with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/tpu-85a
- Anycubic Kobra 3 Max with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/tpu-90a
- Anycubic Kobra 3 Max with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/tpu-95a-hf
- Anycubic Kobra 3 Max with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/bambu-lab/tpu-for-ams
- Anycubic Kobra 3 Max with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/asa
- Anycubic Kobra 3 Max with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/cpe
- Anycubic Kobra 3 Max with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/economy-pla
- Anycubic Kobra 3 Max with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/glow-pha
- Anycubic Kobra 3 Max with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/high-speed-pla
- Anycubic Kobra 3 Max with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/lw-ht-pla
- Anycubic Kobra 3 Max with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/matte-pla
- Anycubic Kobra 3 Max with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/petg
- Anycubic Kobra 3 Max with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/pha
- Anycubic Kobra 3 Max with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/pha-pla
- Anycubic Kobra 3 Max with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/pla
- Anycubic Kobra 3 Max with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/r-semi-pla
- Anycubic Kobra 3 Max with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/semi-pla
- Anycubic Kobra 3 Max with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/silk-pla
- Anycubic Kobra 3 Max with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/stonefill-pla
- Anycubic Kobra 3 Max with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/colorfabb/tpu
- Anycubic Kobra 3 Max with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/95a-tpu
- Anycubic Kobra 3 Max with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/abs
- Anycubic Kobra 3 Max with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/cr-petg
- Anycubic Kobra 3 Max with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/cr-pla-carbon
- Anycubic Kobra 3 Max with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/ender-fast-pla
- Anycubic Kobra 3 Max with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/ender-pla-plus
- Anycubic Kobra 3 Max with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hp-asa
- Anycubic Kobra 3 Max with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hp-tpu
- Anycubic Kobra 3 Max with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-abs
- Anycubic Kobra 3 Max with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-luminous-pla
- Anycubic Kobra 3 Max with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-pa6-cf
- Anycubic Kobra 3 Max with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-pc
- Anycubic Kobra 3 Max with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-petg
- Anycubic Kobra 3 Max with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-pla
- Anycubic Kobra 3 Max with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-pla-cf
- Anycubic Kobra 3 Max with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/hyper-rainbow-pla
- Anycubic Kobra 3 Max with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/petg
- Anycubic Kobra 3 Max with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/pla
- Anycubic Kobra 3 Max with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/pla-cf
- Anycubic Kobra 3 Max with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/pla-cr-wood
- Anycubic Kobra 3 Max with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/ppa-cf
- Anycubic Kobra 3 Max with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/silk-pla
- Anycubic Kobra 3 Max with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/soleyin-basic-petg
- Anycubic Kobra 3 Max with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/creality/soleyin-ultra-pla
- Anycubic Kobra 3 Max with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/abs
- Anycubic Kobra 3 Max with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/asa
- Anycubic Kobra 3 Max with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/galaxy-pla
- Anycubic Kobra 3 Max with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/paht-cf
- Anycubic Kobra 3 Max with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pc
- Anycubic Kobra 3 Max with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pc-fr
- Anycubic Kobra 3 Max with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pet-cf
- Anycubic Kobra 3 Max with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/petg
- Anycubic Kobra 3 Max with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/petg-pro
- Anycubic Kobra 3 Max with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/petg-translucent
- Anycubic Kobra 3 Max with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/petg-cf
- Anycubic Kobra 3 Max with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/petg-gf
- Anycubic Kobra 3 Max with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla
- Anycubic Kobra 3 Max with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-basic
- Anycubic Kobra 3 Max with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-glow
- Anycubic Kobra 3 Max with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-marble
- Anycubic Kobra 3 Max with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-matte
- Anycubic Kobra 3 Max with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-metallic
- Anycubic Kobra 3 Max with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-plus
- Anycubic Kobra 3 Max with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-pro
- Anycubic Kobra 3 Max with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-sparkle
- Anycubic Kobra 3 Max with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-wood
- Anycubic Kobra 3 Max with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/pla-cf
- Anycubic Kobra 3 Max with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/rapid-petg
- Anycubic Kobra 3 Max with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/rapid-pla-plus
- Anycubic Kobra 3 Max with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/rapid-tpu-95a
- Anycubic Kobra 3 Max with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/silk-pla
- Anycubic Kobra 3 Max with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/elegoo/tpu-95a
- Anycubic Kobra 3 Max with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/abs
- Anycubic Kobra 3 Max with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/abs-high-speed
- Anycubic Kobra 3 Max with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/abs-cf
- Anycubic Kobra 3 Max with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/abs-gf
- Anycubic Kobra 3 Max with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/abs-pc
- Anycubic Kobra 3 Max with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/abs-plus
- Anycubic Kobra 3 Max with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/asa
- Anycubic Kobra 3 Max with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/asa-high-speed
- Anycubic Kobra 3 Max with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/asa-light-weight
- Anycubic Kobra 3 Max with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/asa-cf
- Anycubic Kobra 3 Max with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/asa-gf
- Anycubic Kobra 3 Max with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pa12-nylon
- Anycubic Kobra 3 Max with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pa12-cf
- Anycubic Kobra 3 Max with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pa12-gf
- Anycubic Kobra 3 Max with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pa6-cf
- Anycubic Kobra 3 Max with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pa6-gf
- Anycubic Kobra 3 Max with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/petg
- Anycubic Kobra 3 Max with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/petg-cf
- Anycubic Kobra 3 Max with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla
- Anycubic Kobra 3 Max with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-burnt-titanium
- Anycubic Kobra 3 Max with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-burnt-titanium-dual-color
- Anycubic Kobra 3 Max with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-burnt-titanium-rainbow
- Anycubic Kobra 3 Max with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-burnt-titanium-triple-color
- Anycubic Kobra 3 Max with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-galaxy
- Anycubic Kobra 3 Max with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-high-speed
- Anycubic Kobra 3 Max with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-light-weight
- Anycubic Kobra 3 Max with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-luminous
- Anycubic Kobra 3 Max with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-marble
- Anycubic Kobra 3 Max with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte
- Anycubic Kobra 3 Max with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte-dual-color
- Anycubic Kobra 3 Max with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte-gradient
- Anycubic Kobra 3 Max with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte-high-speed
- Anycubic Kobra 3 Max with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte-high-speed-gradient-multi-color
- Anycubic Kobra 3 Max with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte-high-speed-rock-rainbow
- Anycubic Kobra 3 Max with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte-high-speed-triple-color
- Anycubic Kobra 3 Max with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-matte-rainbow
- Anycubic Kobra 3 Max with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-metallic
- Anycubic Kobra 3 Max with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-rainbow
- Anycubic Kobra 3 Max with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-silk
- Anycubic Kobra 3 Max with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-silk-high-speed-dual-color
- Anycubic Kobra 3 Max with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-silk-high-speed-quadruple
- Anycubic Kobra 3 Max with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-silk-high-speed-triple-color
- Anycubic Kobra 3 Max with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-silk-rainbow
- Anycubic Kobra 3 Max with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-ultra-silk
- Anycubic Kobra 3 Max with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-wood
- Anycubic Kobra 3 Max with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-cf
- Anycubic Kobra 3 Max with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-plus
- Anycubic Kobra 3 Max with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pla-plus-high-speed
- Anycubic Kobra 3 Max with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pp
- Anycubic Kobra 3 Max with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/pp-cf
- Anycubic Kobra 3 Max with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/tpu
- Anycubic Kobra 3 Max with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/tpu-90a
- Anycubic Kobra 3 Max with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/tpu-high-speed
- Anycubic Kobra 3 Max with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/eryone/tpu-rainbow
- Anycubic Kobra 3 Max with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/abs-plus
- Anycubic Kobra 3 Max with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/abs-pluscf
- Anycubic Kobra 3 Max with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/abs-plushs
- Anycubic Kobra 3 Max with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/asa-plus
- Anycubic Kobra 3 Max with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/dark-twinkling-pla-magic
- Anycubic Kobra 3 Max with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/epaht-cf
- Anycubic Kobra 3 Max with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/epla-plushs
- Anycubic Kobra 3 Max with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/esun-petg-matte
- Anycubic Kobra 3 Max with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/mystic-silk-pla
- Anycubic Kobra 3 Max with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pa12-cf
- Anycubic Kobra 3 Max with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pa6-pa
- Anycubic Kobra 3 Max with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pa6-pa-cf
- Anycubic Kobra 3 Max with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/peak-pla
- Anycubic Kobra 3 Max with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pet
- Anycubic Kobra 3 Max with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/petg
- Anycubic Kobra 3 Max with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/petg-basic
- Anycubic Kobra 3 Max with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/petg-matte
- Anycubic Kobra 3 Max with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/petg-pluscf
- Anycubic Kobra 3 Max with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/petg-plushs
- Anycubic Kobra 3 Max with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-basic
- Anycubic Kobra 3 Max with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-cf
- Anycubic Kobra 3 Max with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-chameleon
- Anycubic Kobra 3 Max with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-hs
- Anycubic Kobra 3 Max with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-lite
- Anycubic Kobra 3 Max with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-luminous
- Anycubic Kobra 3 Max with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-luminous-rainbow
- Anycubic Kobra 3 Max with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-lw
- Anycubic Kobra 3 Max with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-marble
- Anycubic Kobra 3 Max with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-matte
- Anycubic Kobra 3 Max with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-metal
- Anycubic Kobra 3 Max with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-silk
- Anycubic Kobra 3 Max with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-silk-candy
- Anycubic Kobra 3 Max with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-silk-magic
- Anycubic Kobra 3 Max with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-silk-metal
- Anycubic Kobra 3 Max with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-silk-rainbow
- Anycubic Kobra 3 Max with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-st
- Anycubic Kobra 3 Max with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-stars
- Anycubic Kobra 3 Max with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-wood
- Anycubic Kobra 3 Max with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-plus
- Anycubic Kobra 3 Max with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pla-plus-cmyk
- Anycubic Kobra 3 Max with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/pva
- Anycubic Kobra 3 Max with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/silk-petg
- Anycubic Kobra 3 Max with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/tpe-83a
- Anycubic Kobra 3 Max with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/tpu-95a
- Anycubic Kobra 3 Max with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/tpu-lw
- Anycubic Kobra 3 Max with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/esun-3d/uv-change-pla-uv-color-change
- Anycubic Kobra 3 Max with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/basic-pla
- Anycubic Kobra 3 Max with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/biofusion-pla
- Anycubic Kobra 3 Max with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/biofusion-silk-pla
- Anycubic Kobra 3 Max with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/durapro-abs
- Anycubic Kobra 3 Max with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/durapro-asa
- Anycubic Kobra 3 Max with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/durapro-cf-pa12
- Anycubic Kobra 3 Max with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/durapro-matte-asa
- Anycubic Kobra 3 Max with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/durapro-pa12
- Anycubic Kobra 3 Max with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/durapro-pbt-pc
- Anycubic Kobra 3 Max with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/flax-pla
- Anycubic Kobra 3 Max with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/flex-hard-cf-tpu
- Anycubic Kobra 3 Max with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/flex-hard-tpu
- Anycubic Kobra 3 Max with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/flex-medium-tpu
- Anycubic Kobra 3 Max with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/flex-semisoft-tpu
- Anycubic Kobra 3 Max with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/glow-petg
- Anycubic Kobra 3 Max with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/greentec-matte-pla
- Anycubic Kobra 3 Max with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/greentec-pla
- Anycubic Kobra 3 Max with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/pctg
- Anycubic Kobra 3 Max with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/pearl-pla
- Anycubic Kobra 3 Max with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/petg
- Anycubic Kobra 3 Max with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/pla-nx2-matt
- Anycubic Kobra 3 Max with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/extrudr/wood-pla
- Anycubic Kobra 3 Max with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/fillamentum/asa-extrafill
- Anycubic Kobra 3 Max with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/fillamentum/cpe-hg100
- Anycubic Kobra 3 Max with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/fillamentum/pla-crystal-clear
- Anycubic Kobra 3 Max with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/fillamentum/pla-extrafill
- Anycubic Kobra 3 Max with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/abs
- Anycubic Kobra 3 Max with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/glow-abs
- Anycubic Kobra 3 Max with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/glow-pla
- Anycubic Kobra 3 Max with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/metallic-finish-pla
- Anycubic Kobra 3 Max with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/petg
- Anycubic Kobra 3 Max with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/pla
- Anycubic Kobra 3 Max with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/pla-basic
- Anycubic Kobra 3 Max with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/pla-cf
- Anycubic Kobra 3 Max with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/pla-matte
- Anycubic Kobra 3 Max with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/pla-max
- Anycubic Kobra 3 Max with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/pla-metal
- Anycubic Kobra 3 Max with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/pla-pro
- Anycubic Kobra 3 Max with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/silk-pla
- Anycubic Kobra 3 Max with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/tpu
- Anycubic Kobra 3 Max with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/transparent-pla
- Anycubic Kobra 3 Max with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/uv-color-changing-pla
- Anycubic Kobra 3 Max with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/hatchbox/wood-pla
- Anycubic Kobra 3 Max with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/abs
- Anycubic Kobra 3 Max with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/carbon-fiber-nylon
- Anycubic Kobra 3 Max with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/galaxy-pla
- Anycubic Kobra 3 Max with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/glow-abs
- Anycubic Kobra 3 Max with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/high-speed-pla-plus
- Anycubic Kobra 3 Max with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/petg-plus
- Anycubic Kobra 3 Max with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla
- Anycubic Kobra 3 Max with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla-basic
- Anycubic Kobra 3 Max with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla-chameleon
- Anycubic Kobra 3 Max with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla-glitter-rainbow
- Anycubic Kobra 3 Max with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla-matte
- Anycubic Kobra 3 Max with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla-mystic-silk
- Anycubic Kobra 3 Max with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla-silk-rainbow
- Anycubic Kobra 3 Max with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/pla-plus
- Anycubic Kobra 3 Max with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/silk-pla
- Anycubic Kobra 3 Max with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/inland/tpu
- Anycubic Kobra 3 Max with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/jayo/high-speed-matte-pla
- Anycubic Kobra 3 Max with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/jayo/matte-pla
- Anycubic Kobra 3 Max with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/jayo/petg
- Anycubic Kobra 3 Max with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/jayo/pla
- Anycubic Kobra 3 Max with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/jayo/pla-plus
- Anycubic Kobra 3 Max with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/jayo/silk-pla
- Anycubic Kobra 3 Max with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/jayo/tpu
- Anycubic Kobra 3 Max with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/abs
- Anycubic Kobra 3 Max with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/glow-pla
- Anycubic Kobra 3 Max with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/high-speed-petg
- Anycubic Kobra 3 Max with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/high-speed-pla
- Anycubic Kobra 3 Max with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/matte-pla
- Anycubic Kobra 3 Max with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/petg
- Anycubic Kobra 3 Max with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/petg-cf
- Anycubic Kobra 3 Max with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/pla
- Anycubic Kobra 3 Max with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/pla-basic
- Anycubic Kobra 3 Max with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/pla-cf
- Anycubic Kobra 3 Max with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/silk-pla
- Anycubic Kobra 3 Max with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/kingroon/tpu
- Anycubic Kobra 3 Max with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/abs
- Anycubic Kobra 3 Max with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/abs-basic
- Anycubic Kobra 3 Max with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/asa
- Anycubic Kobra 3 Max with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/asa-basic
- Anycubic Kobra 3 Max with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/easy-nylon
- Anycubic Kobra 3 Max with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/glow-abs
- Anycubic Kobra 3 Max with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/glow-pla
- Anycubic Kobra 3 Max with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/high-speed-petg
- Anycubic Kobra 3 Max with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/high-speed-pla
- Anycubic Kobra 3 Max with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/high-speed-tpu
- Anycubic Kobra 3 Max with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/luminous-high-speed-glow-tpu
- Anycubic Kobra 3 Max with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/matte-pla
- Anycubic Kobra 3 Max with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pc
- Anycubic Kobra 3 Max with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pc-professional
- Anycubic Kobra 3 Max with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/petg
- Anycubic Kobra 3 Max with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/petg-basic
- Anycubic Kobra 3 Max with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/petg-refill
- Anycubic Kobra 3 Max with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla
- Anycubic Kobra 3 Max with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-air
- Anycubic Kobra 3 Max with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-cf
- Anycubic Kobra 3 Max with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-cream
- Anycubic Kobra 3 Max with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-easy
- Anycubic Kobra 3 Max with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-easy-glow
- Anycubic Kobra 3 Max with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-plus
- Anycubic Kobra 3 Max with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-professional
- Anycubic Kobra 3 Max with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-refill
- Anycubic Kobra 3 Max with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-rock
- Anycubic Kobra 3 Max with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-super
- Anycubic Kobra 3 Max with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/pla-turbo-rapid
- Anycubic Kobra 3 Max with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/shimmer-pla
- Anycubic Kobra 3 Max with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/silk-pla
- Anycubic Kobra 3 Max with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/overture/tpu
- Anycubic Kobra 3 Max with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/abs
- Anycubic Kobra 3 Max with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/asa
- Anycubic Kobra 3 Max with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/cpe
- Anycubic Kobra 3 Max with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/creator-special-edition-pla
- Anycubic Kobra 3 Max with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/draft-pla
- Anycubic Kobra 3 Max with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/dual-panchroma-matte-pla
- Anycubic Kobra 3 Max with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/for-production-matte-pla
- Anycubic Kobra 3 Max with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/glow-pla
- Anycubic Kobra 3 Max with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/gradient-panchroma-pla
- Anycubic Kobra 3 Max with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/ht-pla-pro
- Anycubic Kobra 3 Max with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/ht-pla
- Anycubic Kobra 3 Max with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/ht-pla-gf
- Anycubic Kobra 3 Max with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/lw-polylite-pla
- Anycubic Kobra 3 Max with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/metallic-polylite-pla
- Anycubic Kobra 3 Max with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/metallic-polylite-silk-abs
- Anycubic Kobra 3 Max with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/metallic-polylite-silk-pla
- Anycubic Kobra 3 Max with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/muted-panchroma-matte-pla
- Anycubic Kobra 3 Max with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/neon-panchroma-pla
- Anycubic Kobra 3 Max with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pa12-cf
- Anycubic Kobra 3 Max with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pa6-cf
- Anycubic Kobra 3 Max with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pa6-gf
- Anycubic Kobra 3 Max with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/panchroma-cope
- Anycubic Kobra 3 Max with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/panchroma-glow-pla
- Anycubic Kobra 3 Max with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/panchroma-pla
- Anycubic Kobra 3 Max with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/panchroma-silk-pla
- Anycubic Kobra 3 Max with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pc
- Anycubic Kobra 3 Max with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pc-abs
- Anycubic Kobra 3 Max with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pc-pbt
- Anycubic Kobra 3 Max with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pet-cf
- Anycubic Kobra 3 Max with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/petg
- Anycubic Kobra 3 Max with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/petg-cf
- Anycubic Kobra 3 Max with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pla
- Anycubic Kobra 3 Max with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pla-cf
- Anycubic Kobra 3 Max with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pla-polycast
- Anycubic Kobra 3 Max with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polyflex-95-hf-high-speed-tpu
- Anycubic Kobra 3 Max with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polyflex-tpu
- Anycubic Kobra 3 Max with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polylite-abs
- Anycubic Kobra 3 Max with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polylite-asa
- Anycubic Kobra 3 Max with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polylite-pc
- Anycubic Kobra 3 Max with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polylite-petg
- Anycubic Kobra 3 Max with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polylite-pla
- Anycubic Kobra 3 Max with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polylite-pla-cf
- Anycubic Kobra 3 Max with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polymaker-pla-pro
- Anycubic Kobra 3 Max with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polymax-pc
- Anycubic Kobra 3 Max with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polymax-petg
- Anycubic Kobra 3 Max with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polymax-pla
- Anycubic Kobra 3 Max with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polymide-copa-pa6
- Anycubic Kobra 3 Max with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polysmooth
- Anycubic Kobra 3 Max with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polysonic-pla
- Anycubic Kobra 3 Max with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/polysupport-for-pla
- Anycubic Kobra 3 Max with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pps-cf
- Anycubic Kobra 3 Max with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pva
- Anycubic Kobra 3 Max with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pva-polydissolve-s1
- Anycubic Kobra 3 Max with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pva-polysupport-for-pa12
- Anycubic Kobra 3 Max with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/pvb
- Anycubic Kobra 3 Max with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/satin-panchroma-pla
- Anycubic Kobra 3 Max with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/silk-abs
- Anycubic Kobra 3 Max with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/silk-pla
- Anycubic Kobra 3 Max with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/polymaker/wood-pla
- Anycubic Kobra 3 Max with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/basic-pla
- Anycubic Kobra 3 Max with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/conductive-pla
- Anycubic Kobra 3 Max with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/fiber-ht-matte-pla
- Anycubic Kobra 3 Max with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/fluorescent-pla
- Anycubic Kobra 3 Max with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/glitter-petg
- Anycubic Kobra 3 Max with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/glitter-pla
- Anycubic Kobra 3 Max with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/glow-pla
- Anycubic Kobra 3 Max with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/high-speed-pla
- Anycubic Kobra 3 Max with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/iron-metal-composite-pla
- Anycubic Kobra 3 Max with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/marble-pla
- Anycubic Kobra 3 Max with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/matte-pla
- Anycubic Kobra 3 Max with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/metal-composite-pla
- Anycubic Kobra 3 Max with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/metallic-petg
- Anycubic Kobra 3 Max with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/metallic-pla
- Anycubic Kobra 3 Max with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/multicolor-pla
- Anycubic Kobra 3 Max with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/nebula-pla
- Anycubic Kobra 3 Max with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/opaque-pla
- Anycubic Kobra 3 Max with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/pearl-pla
- Anycubic Kobra 3 Max with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/petg
- Anycubic Kobra 3 Max with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/petg-cf
- Anycubic Kobra 3 Max with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/pla
- Anycubic Kobra 3 Max with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/pla-cf
- Anycubic Kobra 3 Max with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/pla-green-glow-in-the-dark
- Anycubic Kobra 3 Max with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/recycled-petg
- Anycubic Kobra 3 Max with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/recycled-pla
- Anycubic Kobra 3 Max with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/satin-pla
- Anycubic Kobra 3 Max with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/silk-petg
- Anycubic Kobra 3 Max with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/silk-pla
- Anycubic Kobra 3 Max with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/simply-petg
- Anycubic Kobra 3 Max with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/stainless-steel-metal-composite-pla
- Anycubic Kobra 3 Max with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/static-dissipative-carbon-fiber-pla
- Anycubic Kobra 3 Max with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/static-dissipative-petg
- Anycubic Kobra 3 Max with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/static-dissipative-pla
- Anycubic Kobra 3 Max with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/steel-metal-composite-pla
- Anycubic Kobra 3 Max with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/still-colorful-recycled-pla
- Anycubic Kobra 3 Max with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/thermochromic-pla
- Anycubic Kobra 3 Max with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/tpe
- Anycubic Kobra 3 Max with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/tpu
- Anycubic Kobra 3 Max with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/translucent-petg
- Anycubic Kobra 3 Max with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/protopasta/translucent-pla
- Anycubic Kobra 3 Max with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/asa
- Anycubic Kobra 3 Max with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/blend-silk-pla
- Anycubic Kobra 3 Max with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/matte-petg
- Anycubic Kobra 3 Max with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/mystic-premium-pla
- Anycubic Kobra 3 Max with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 95 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pa11-cf
- Anycubic Kobra 3 Max with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pc
- Anycubic Kobra 3 Max with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pc-blend
- Anycubic Kobra 3 Max with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pc-cf
- Anycubic Kobra 3 Max with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pei
- Anycubic Kobra 3 Max with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pei-1010
- Anycubic Kobra 3 Max with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/petg
- Anycubic Kobra 3 Max with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/petg-cf
- Anycubic Kobra 3 Max with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/petg-magnetite
- Anycubic Kobra 3 Max with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/petg-tungsten
- Anycubic Kobra 3 Max with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/petg-v0
- Anycubic Kobra 3 Max with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pla
- Anycubic Kobra 3 Max with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pla-recycled
- Anycubic Kobra 3 Max with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pla-woodfill
- Anycubic Kobra 3 Max with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pp-cf
- Anycubic Kobra 3 Max with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pp-gf
- Anycubic Kobra 3 Max with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/pvb
- Anycubic Kobra 3 Max with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/rpla
- Anycubic Kobra 3 Max with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/prusament/tpu-95a
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-abs-ht-hf
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-abs-cf-core
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-abs-gf
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-asa-gf
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-pet-cf
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-pet-gf
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-petg-cf-pro
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-ppa
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-ppa-cf
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-ppa-cf-core
- Anycubic Kobra 3 Max with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/fibreheart-tpu-gf
- Anycubic Kobra 3 Max with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/flex-tpu-64d
- Anycubic Kobra 3 Max with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/flex-tpu-85a
- Anycubic Kobra 3 Max with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/flex-tpu-air-85a
- Anycubic Kobra 3 Max with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/rebound-peba-85a
- Anycubic Kobra 3 Max with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/rebound-peba-95a
- Anycubic Kobra 3 Max with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/rebound-peba-air-95a
- Anycubic Kobra 3 Max with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/roamr-tpu-air-hr-80a
- Anycubic Kobra 3 Max with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/siraya-tech/roamr-tpu-air-hr-85a
- Anycubic Kobra 3 Max with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/95a-high-speed-tpu
- Anycubic Kobra 3 Max with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/abs
- Anycubic Kobra 3 Max with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/abs-fr
- Anycubic Kobra 3 Max with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/apla
- Anycubic Kobra 3 Max with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/asa
- Anycubic Kobra 3 Max with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/fluorescent-pla
- Anycubic Kobra 3 Max with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/glow-petg
- Anycubic Kobra 3 Max with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/glow-pla
- Anycubic Kobra 3 Max with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/high-speed-abs
- Anycubic Kobra 3 Max with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/high-speed-matte-petg
- Anycubic Kobra 3 Max with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/high-speed-matte-pla
- Anycubic Kobra 3 Max with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/high-speed-petg
- Anycubic Kobra 3 Max with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/high-speed-pla
- Anycubic Kobra 3 Max with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/high-speed-pla-marble
- Anycubic Kobra 3 Max with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/high-speed-pla-plus
- Anycubic Kobra 3 Max with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/luminous-glow-in-the-dark-petg
- Anycubic Kobra 3 Max with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/matte-petg-cf
- Anycubic Kobra 3 Max with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pa12-cf
- Anycubic Kobra 3 Max with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pa6-easy-pa
- Anycubic Kobra 3 Max with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pa6-cf
- Anycubic Kobra 3 Max with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pa6-gf
- Anycubic Kobra 3 Max with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pc
- Anycubic Kobra 3 Max with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pc-abs
- Anycubic Kobra 3 Max with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pcl
- Anycubic Kobra 3 Max with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/peek
- Anycubic Kobra 3 Max with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/petg
- Anycubic Kobra 3 Max with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/petg-2-0
- Anycubic Kobra 3 Max with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/petg-carbon-fiber
- Anycubic Kobra 3 Max with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/petg-glow-in-the-dark-filament
- Anycubic Kobra 3 Max with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla
- Anycubic Kobra 3 Max with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-carbon-fiber
- Anycubic Kobra 3 Max with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-cf
- Anycubic Kobra 3 Max with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-classic
- Anycubic Kobra 3 Max with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-galaxy
- Anycubic Kobra 3 Max with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-glow-in-the-dark
- Anycubic Kobra 3 Max with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-matte
- Anycubic Kobra 3 Max with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-matte-dual-color
- Anycubic Kobra 3 Max with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-rainbow
- Anycubic Kobra 3 Max with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-silk
- Anycubic Kobra 3 Max with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-transparent-rainbow
- Anycubic Kobra 3 Max with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-twinkling
- Anycubic Kobra 3 Max with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-wood
- Anycubic Kobra 3 Max with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-meta
- Anycubic Kobra 3 Max with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-plus
- Anycubic Kobra 3 Max with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pla-plus-2-0
- Anycubic Kobra 3 Max with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pp
- Anycubic Kobra 3 Max with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pva
- Anycubic Kobra 3 Max with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/pvb
- Anycubic Kobra 3 Max with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/real-wood-fiber-pla
- Anycubic Kobra 3 Max with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/silk-2-0
- Anycubic Kobra 3 Max with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/silk-pla-plus
- Anycubic Kobra 3 Max with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/silk-pla-plus-dual-color
- Anycubic Kobra 3 Max with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/silk-pla-plus-four-color
- Anycubic Kobra 3 Max with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/silk-pla-plus-rainbow
- Anycubic Kobra 3 Max with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/silk-pla-plus-tri-color
- Anycubic Kobra 3 Max with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/temperature-color-change-pla
- Anycubic Kobra 3 Max with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/tpu
- Anycubic Kobra 3 Max with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/tpu-silk
- Anycubic Kobra 3 Max with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/tpu90a
- Anycubic Kobra 3 Max with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/tpu95a
- Anycubic Kobra 3 Max with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/transparent-clear-pla
- Anycubic Kobra 3 Max with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/anycubic-kobra-3-max/sunlu/upgrade-pla
- Qidi Q1 Pro with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/90a-flexible-peba
- Qidi Q1 Pro with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/basic-matte-pla
- Qidi Q1 Pro with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/basic-silk-pla
- Qidi Q1 Pro with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/conductive-pla
- Qidi Q1 Pro with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/crystal-transparent-pla
- Qidi Q1 Pro with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/dual-color-matte-pla
- Qidi Q1 Pro with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/dual-color-silk-pla
- Qidi Q1 Pro with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Qidi Q1 Pro with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/glow-pla
- Qidi Q1 Pro with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/glow-tpu
- Qidi Q1 Pro with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/high-speed-pla
- Qidi Q1 Pro with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/marble-pla
- Qidi Q1 Pro with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/matte-pla
- Qidi Q1 Pro with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/peba
- Qidi Q1 Pro with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/petg
- Qidi Q1 Pro with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/pla
- Qidi Q1 Pro with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/amolen/pla-cf
- Qidi Q1 Pro with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/pla-metal
- Qidi Q1 Pro with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/quad-color-silk-pla
- Qidi Q1 Pro with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/rainbow-silk-pla
- Qidi Q1 Pro with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/s-series-silk-pla
- Qidi Q1 Pro with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/shiny-glitter-silk-pla
- Qidi Q1 Pro with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/shiny-gradient-silk-pla
- Qidi Q1 Pro with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/amolen/silk-gf-pla
- Qidi Q1 Pro with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/silk-pla
- Qidi Q1 Pro with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/temperature-color-change-pla
- Qidi Q1 Pro with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/tpu
- Qidi Q1 Pro with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/transparent-pla
- Qidi Q1 Pro with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/triple-color-matte-pla
- Qidi Q1 Pro with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/triple-color-silk-pla
- Qidi Q1 Pro with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/uv-color-change-pla
- Qidi Q1 Pro with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/amolen/wood-pla
- Qidi Q1 Pro with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/abs
- Qidi Q1 Pro with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/asa
- Qidi Q1 Pro with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/high-speed-pla
- Qidi Q1 Pro with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/petg
- Qidi Q1 Pro with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-basic
- Qidi Q1 Pro with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-galaxy
- Qidi Q1 Pro with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-marble
- Qidi Q1 Pro with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-matte
- Qidi Q1 Pro with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-metal
- Qidi Q1 Pro with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-plus
- Qidi Q1 Pro with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-silk
- Qidi Q1 Pro with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-silk-dual-tricolor
- Qidi Q1 Pro with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/pla-special
- Qidi Q1 Pro with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/tpu
- Qidi Q1 Pro with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/anycubic/translucent-petg
- Qidi Q1 Pro with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/abs
- Qidi Q1 Pro with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/abs-gf
- Qidi Q1 Pro with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/asa
- Qidi Q1 Pro with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/asa-aero
- Qidi Q1 Pro with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/asa-cf
- Qidi Q1 Pro with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/matte-asa-cf
- Qidi Q1 Pro with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pa12-cf
- Qidi Q1 Pro with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pa6-cf
- Qidi Q1 Pro with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pa6-gf
- Qidi Q1 Pro with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/paht-cf
- Qidi Q1 Pro with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pc
- Qidi Q1 Pro with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pc-fr
- Qidi Q1 Pro with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pet-cf
- Qidi Q1 Pro with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/petg-basic
- Qidi Q1 Pro with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/petg-hf
- Qidi Q1 Pro with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/petg-matte
- Qidi Q1 Pro with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/petg-translucent
- Qidi Q1 Pro with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/petg-cf
- Qidi Q1 Pro with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla
- Qidi Q1 Pro with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-aero
- Qidi Q1 Pro with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-basic
- Qidi Q1 Pro with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-basic-gradient
- Qidi Q1 Pro with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-galaxy
- Qidi Q1 Pro with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-glow
- Qidi Q1 Pro with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-lite
- Qidi Q1 Pro with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-marble
- Qidi Q1 Pro with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-matte
- Qidi Q1 Pro with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-metal
- Qidi Q1 Pro with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-pure
- Qidi Q1 Pro with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-silk-dual-color
- Qidi Q1 Pro with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-silk-multi-color
- Qidi Q1 Pro with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-silk-plus
- Qidi Q1 Pro with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-sparkle
- Qidi Q1 Pro with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-tough-plus
- Qidi Q1 Pro with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-translucent
- Qidi Q1 Pro with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-wood
- Qidi Q1 Pro with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pla-cf
- Qidi Q1 Pro with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/ppa-cf
- Qidi Q1 Pro with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pps-cf
- Qidi Q1 Pro with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/pva
- Qidi Q1 Pro with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/silk-pla
- Qidi Q1 Pro with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/support-for-abs
- Qidi Q1 Pro with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/support-for-pa-pet
- Qidi Q1 Pro with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/support-for-pla
- Qidi Q1 Pro with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/support-for-pla-petg
- Qidi Q1 Pro with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/tpu
- Qidi Q1 Pro with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/tpu-85a
- Qidi Q1 Pro with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/tpu-90a
- Qidi Q1 Pro with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/tpu-95a-hf
- Qidi Q1 Pro with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/bambu-lab/tpu-for-ams
- Qidi Q1 Pro with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/asa
- Qidi Q1 Pro with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/cpe
- Qidi Q1 Pro with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/economy-pla
- Qidi Q1 Pro with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/glow-pha
- Qidi Q1 Pro with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/high-speed-pla
- Qidi Q1 Pro with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/lw-ht-pla
- Qidi Q1 Pro with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/matte-pla
- Qidi Q1 Pro with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/petg
- Qidi Q1 Pro with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/pha
- Qidi Q1 Pro with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/pha-pla
- Qidi Q1 Pro with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/pla
- Qidi Q1 Pro with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/r-semi-pla
- Qidi Q1 Pro with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/semi-pla
- Qidi Q1 Pro with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/silk-pla
- Qidi Q1 Pro with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/stonefill-pla
- Qidi Q1 Pro with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/colorfabb/tpu
- Qidi Q1 Pro with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/95a-tpu
- Qidi Q1 Pro with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/abs
- Qidi Q1 Pro with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/cr-petg
- Qidi Q1 Pro with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/cr-pla-carbon
- Qidi Q1 Pro with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/ender-fast-pla
- Qidi Q1 Pro with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/ender-pla-plus
- Qidi Q1 Pro with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hp-asa
- Qidi Q1 Pro with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hp-tpu
- Qidi Q1 Pro with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-abs
- Qidi Q1 Pro with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-luminous-pla
- Qidi Q1 Pro with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-pa6-cf
- Qidi Q1 Pro with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-pc
- Qidi Q1 Pro with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-petg
- Qidi Q1 Pro with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-pla
- Qidi Q1 Pro with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-pla-cf
- Qidi Q1 Pro with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/hyper-rainbow-pla
- Qidi Q1 Pro with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/petg
- Qidi Q1 Pro with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/pla
- Qidi Q1 Pro with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/creality/pla-cf
- Qidi Q1 Pro with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/pla-cr-wood
- Qidi Q1 Pro with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/creality/ppa-cf
- Qidi Q1 Pro with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/silk-pla
- Qidi Q1 Pro with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/soleyin-basic-petg
- Qidi Q1 Pro with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/creality/soleyin-ultra-pla
- Qidi Q1 Pro with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/abs
- Qidi Q1 Pro with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/asa
- Qidi Q1 Pro with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/galaxy-pla
- Qidi Q1 Pro with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/paht-cf
- Qidi Q1 Pro with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pc
- Qidi Q1 Pro with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pc-fr
- Qidi Q1 Pro with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pet-cf
- Qidi Q1 Pro with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/petg
- Qidi Q1 Pro with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/petg-pro
- Qidi Q1 Pro with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/petg-translucent
- Qidi Q1 Pro with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/petg-cf
- Qidi Q1 Pro with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/petg-gf
- Qidi Q1 Pro with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla
- Qidi Q1 Pro with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-basic
- Qidi Q1 Pro with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-glow
- Qidi Q1 Pro with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-marble
- Qidi Q1 Pro with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-matte
- Qidi Q1 Pro with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-metallic
- Qidi Q1 Pro with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-plus
- Qidi Q1 Pro with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-pro
- Qidi Q1 Pro with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-sparkle
- Qidi Q1 Pro with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-wood
- Qidi Q1 Pro with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/pla-cf
- Qidi Q1 Pro with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/rapid-petg
- Qidi Q1 Pro with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/rapid-pla-plus
- Qidi Q1 Pro with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/rapid-tpu-95a
- Qidi Q1 Pro with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/silk-pla
- Qidi Q1 Pro with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/elegoo/tpu-95a
- Qidi Q1 Pro with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/abs
- Qidi Q1 Pro with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/abs-high-speed
- Qidi Q1 Pro with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/abs-cf
- Qidi Q1 Pro with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/abs-gf
- Qidi Q1 Pro with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/abs-pc
- Qidi Q1 Pro with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/abs-plus
- Qidi Q1 Pro with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/asa
- Qidi Q1 Pro with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/asa-high-speed
- Qidi Q1 Pro with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/asa-light-weight
- Qidi Q1 Pro with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/asa-cf
- Qidi Q1 Pro with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/asa-gf
- Qidi Q1 Pro with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pa12-nylon
- Qidi Q1 Pro with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pa12-cf
- Qidi Q1 Pro with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pa12-gf
- Qidi Q1 Pro with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pa6-cf
- Qidi Q1 Pro with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pa6-gf
- Qidi Q1 Pro with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/petg
- Qidi Q1 Pro with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/petg-cf
- Qidi Q1 Pro with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla
- Qidi Q1 Pro with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-burnt-titanium
- Qidi Q1 Pro with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-burnt-titanium-dual-color
- Qidi Q1 Pro with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-burnt-titanium-rainbow
- Qidi Q1 Pro with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-burnt-titanium-triple-color
- Qidi Q1 Pro with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-galaxy
- Qidi Q1 Pro with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-high-speed
- Qidi Q1 Pro with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-light-weight
- Qidi Q1 Pro with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-luminous
- Qidi Q1 Pro with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-marble
- Qidi Q1 Pro with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte
- Qidi Q1 Pro with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte-dual-color
- Qidi Q1 Pro with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte-gradient
- Qidi Q1 Pro with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte-high-speed
- Qidi Q1 Pro with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte-high-speed-gradient-multi-color
- Qidi Q1 Pro with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte-high-speed-rock-rainbow
- Qidi Q1 Pro with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte-high-speed-triple-color
- Qidi Q1 Pro with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-matte-rainbow
- Qidi Q1 Pro with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-metallic
- Qidi Q1 Pro with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-rainbow
- Qidi Q1 Pro with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-silk
- Qidi Q1 Pro with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-silk-high-speed-dual-color
- Qidi Q1 Pro with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-silk-high-speed-quadruple
- Qidi Q1 Pro with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-silk-high-speed-triple-color
- Qidi Q1 Pro with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-silk-rainbow
- Qidi Q1 Pro with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-ultra-silk
- Qidi Q1 Pro with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-wood
- Qidi Q1 Pro with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-cf
- Qidi Q1 Pro with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-plus
- Qidi Q1 Pro with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pla-plus-high-speed
- Qidi Q1 Pro with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pp
- Qidi Q1 Pro with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/eryone/pp-cf
- Qidi Q1 Pro with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/tpu
- Qidi Q1 Pro with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/tpu-90a
- Qidi Q1 Pro with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/tpu-high-speed
- Qidi Q1 Pro with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/eryone/tpu-rainbow
- Qidi Q1 Pro with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/abs-plus
- Qidi Q1 Pro with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/abs-pluscf
- Qidi Q1 Pro with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/abs-plushs
- Qidi Q1 Pro with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/asa-plus
- Qidi Q1 Pro with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/dark-twinkling-pla-magic
- Qidi Q1 Pro with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/epaht-cf
- Qidi Q1 Pro with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/epla-plushs
- Qidi Q1 Pro with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/esun-petg-matte
- Qidi Q1 Pro with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/mystic-silk-pla
- Qidi Q1 Pro with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pa12-cf
- Qidi Q1 Pro with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pa6-pa
- Qidi Q1 Pro with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pa6-pa-cf
- Qidi Q1 Pro with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/peak-pla
- Qidi Q1 Pro with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pet
- Qidi Q1 Pro with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/petg
- Qidi Q1 Pro with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/petg-basic
- Qidi Q1 Pro with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/petg-matte
- Qidi Q1 Pro with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/petg-pluscf
- Qidi Q1 Pro with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/petg-plushs
- Qidi Q1 Pro with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-basic
- Qidi Q1 Pro with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-cf
- Qidi Q1 Pro with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-chameleon
- Qidi Q1 Pro with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-hs
- Qidi Q1 Pro with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-lite
- Qidi Q1 Pro with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-luminous
- Qidi Q1 Pro with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-luminous-rainbow
- Qidi Q1 Pro with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-lw
- Qidi Q1 Pro with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-marble
- Qidi Q1 Pro with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-matte
- Qidi Q1 Pro with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-metal
- Qidi Q1 Pro with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-silk
- Qidi Q1 Pro with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-silk-candy
- Qidi Q1 Pro with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-silk-magic
- Qidi Q1 Pro with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-silk-metal
- Qidi Q1 Pro with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-silk-rainbow
- Qidi Q1 Pro with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-st
- Qidi Q1 Pro with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-stars
- Qidi Q1 Pro with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-wood
- Qidi Q1 Pro with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-plus
- Qidi Q1 Pro with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pla-plus-cmyk
- Qidi Q1 Pro with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/pva
- Qidi Q1 Pro with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/silk-petg
- Qidi Q1 Pro with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/tpe-83a
- Qidi Q1 Pro with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/tpu-95a
- Qidi Q1 Pro with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/tpu-lw
- Qidi Q1 Pro with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/esun-3d/uv-change-pla-uv-color-change
- Qidi Q1 Pro with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/basic-pla
- Qidi Q1 Pro with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/biofusion-pla
- Qidi Q1 Pro with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/biofusion-silk-pla
- Qidi Q1 Pro with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/durapro-abs
- Qidi Q1 Pro with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/durapro-asa
- Qidi Q1 Pro with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/durapro-cf-pa12
- Qidi Q1 Pro with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/durapro-matte-asa
- Qidi Q1 Pro with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/durapro-pa12
- Qidi Q1 Pro with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/durapro-pbt-pc
- Qidi Q1 Pro with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/flax-pla
- Qidi Q1 Pro with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/flex-hard-cf-tpu
- Qidi Q1 Pro with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/flex-hard-tpu
- Qidi Q1 Pro with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/flex-medium-tpu
- Qidi Q1 Pro with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/flex-semisoft-tpu
- Qidi Q1 Pro with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/glow-petg
- Qidi Q1 Pro with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/greentec-matte-pla
- Qidi Q1 Pro with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/greentec-pla
- Qidi Q1 Pro with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/pctg
- Qidi Q1 Pro with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/pearl-pla
- Qidi Q1 Pro with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/petg
- Qidi Q1 Pro with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/pla-nx2-matt
- Qidi Q1 Pro with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/extrudr/wood-pla
- Qidi Q1 Pro with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/fillamentum/asa-extrafill
- Qidi Q1 Pro with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/fillamentum/cpe-hg100
- Qidi Q1 Pro with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/fillamentum/pla-crystal-clear
- Qidi Q1 Pro with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/fillamentum/pla-extrafill
- Qidi Q1 Pro with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/abs
- Qidi Q1 Pro with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/glow-abs
- Qidi Q1 Pro with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/glow-pla
- Qidi Q1 Pro with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/metallic-finish-pla
- Qidi Q1 Pro with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/petg
- Qidi Q1 Pro with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/pla
- Qidi Q1 Pro with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/pla-basic
- Qidi Q1 Pro with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/pla-cf
- Qidi Q1 Pro with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/pla-matte
- Qidi Q1 Pro with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/pla-max
- Qidi Q1 Pro with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/pla-metal
- Qidi Q1 Pro with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/pla-pro
- Qidi Q1 Pro with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/silk-pla
- Qidi Q1 Pro with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/tpu
- Qidi Q1 Pro with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/transparent-pla
- Qidi Q1 Pro with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/uv-color-changing-pla
- Qidi Q1 Pro with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/hatchbox/wood-pla
- Qidi Q1 Pro with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/abs
- Qidi Q1 Pro with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/carbon-fiber-nylon
- Qidi Q1 Pro with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/galaxy-pla
- Qidi Q1 Pro with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/glow-abs
- Qidi Q1 Pro with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/high-speed-pla-plus
- Qidi Q1 Pro with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/petg-plus
- Qidi Q1 Pro with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla
- Qidi Q1 Pro with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla-basic
- Qidi Q1 Pro with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla-chameleon
- Qidi Q1 Pro with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla-glitter-rainbow
- Qidi Q1 Pro with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla-matte
- Qidi Q1 Pro with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla-mystic-silk
- Qidi Q1 Pro with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla-silk-rainbow
- Qidi Q1 Pro with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/pla-plus
- Qidi Q1 Pro with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/silk-pla
- Qidi Q1 Pro with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/inland/tpu
- Qidi Q1 Pro with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/jayo/high-speed-matte-pla
- Qidi Q1 Pro with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/jayo/matte-pla
- Qidi Q1 Pro with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/jayo/petg
- Qidi Q1 Pro with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/jayo/pla
- Qidi Q1 Pro with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/jayo/pla-plus
- Qidi Q1 Pro with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/jayo/silk-pla
- Qidi Q1 Pro with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/jayo/tpu
- Qidi Q1 Pro with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/abs
- Qidi Q1 Pro with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/glow-pla
- Qidi Q1 Pro with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/high-speed-petg
- Qidi Q1 Pro with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/high-speed-pla
- Qidi Q1 Pro with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/matte-pla
- Qidi Q1 Pro with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/petg
- Qidi Q1 Pro with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/petg-cf
- Qidi Q1 Pro with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/pla
- Qidi Q1 Pro with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/pla-basic
- Qidi Q1 Pro with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/pla-cf
- Qidi Q1 Pro with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/silk-pla
- Qidi Q1 Pro with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/kingroon/tpu
- Qidi Q1 Pro with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/abs
- Qidi Q1 Pro with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/abs-basic
- Qidi Q1 Pro with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/asa
- Qidi Q1 Pro with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/asa-basic
- Qidi Q1 Pro with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/easy-nylon
- Qidi Q1 Pro with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/glow-abs
- Qidi Q1 Pro with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/glow-pla
- Qidi Q1 Pro with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/high-speed-petg
- Qidi Q1 Pro with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/high-speed-pla
- Qidi Q1 Pro with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/high-speed-tpu
- Qidi Q1 Pro with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/luminous-high-speed-glow-tpu
- Qidi Q1 Pro with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/matte-pla
- Qidi Q1 Pro with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pc
- Qidi Q1 Pro with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pc-professional
- Qidi Q1 Pro with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/petg
- Qidi Q1 Pro with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/petg-basic
- Qidi Q1 Pro with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/petg-refill
- Qidi Q1 Pro with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla
- Qidi Q1 Pro with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-air
- Qidi Q1 Pro with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-cf
- Qidi Q1 Pro with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-cream
- Qidi Q1 Pro with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-easy
- Qidi Q1 Pro with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-easy-glow
- Qidi Q1 Pro with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-plus
- Qidi Q1 Pro with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-professional
- Qidi Q1 Pro with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-refill
- Qidi Q1 Pro with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-rock
- Qidi Q1 Pro with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-super
- Qidi Q1 Pro with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/pla-turbo-rapid
- Qidi Q1 Pro with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/shimmer-pla
- Qidi Q1 Pro with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/silk-pla
- Qidi Q1 Pro with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/overture/tpu
- Qidi Q1 Pro with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/abs
- Qidi Q1 Pro with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/asa
- Qidi Q1 Pro with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/cpe
- Qidi Q1 Pro with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/creator-special-edition-pla
- Qidi Q1 Pro with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/draft-pla
- Qidi Q1 Pro with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/dual-panchroma-matte-pla
- Qidi Q1 Pro with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/for-production-matte-pla
- Qidi Q1 Pro with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/glow-pla
- Qidi Q1 Pro with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/gradient-panchroma-pla
- Qidi Q1 Pro with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/ht-pla-pro
- Qidi Q1 Pro with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/ht-pla
- Qidi Q1 Pro with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/ht-pla-gf
- Qidi Q1 Pro with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/lw-polylite-pla
- Qidi Q1 Pro with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/metallic-polylite-pla
- Qidi Q1 Pro with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/metallic-polylite-silk-abs
- Qidi Q1 Pro with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/metallic-polylite-silk-pla
- Qidi Q1 Pro with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/muted-panchroma-matte-pla
- Qidi Q1 Pro with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/neon-panchroma-pla
- Qidi Q1 Pro with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pa12-cf
- Qidi Q1 Pro with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pa6-cf
- Qidi Q1 Pro with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pa6-gf
- Qidi Q1 Pro with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/panchroma-cope
- Qidi Q1 Pro with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/panchroma-glow-pla
- Qidi Q1 Pro with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/panchroma-pla
- Qidi Q1 Pro with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/panchroma-silk-pla
- Qidi Q1 Pro with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pc
- Qidi Q1 Pro with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pc-abs
- Qidi Q1 Pro with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pc-pbt
- Qidi Q1 Pro with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pet-cf
- Qidi Q1 Pro with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/petg
- Qidi Q1 Pro with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/petg-cf
- Qidi Q1 Pro with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pla
- Qidi Q1 Pro with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pla-cf
- Qidi Q1 Pro with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pla-polycast
- Qidi Q1 Pro with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polyflex-95-hf-high-speed-tpu
- Qidi Q1 Pro with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polyflex-tpu
- Qidi Q1 Pro with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polylite-abs
- Qidi Q1 Pro with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polylite-asa
- Qidi Q1 Pro with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polylite-pc
- Qidi Q1 Pro with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polylite-petg
- Qidi Q1 Pro with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polylite-pla
- Qidi Q1 Pro with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polylite-pla-cf
- Qidi Q1 Pro with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polymaker-pla-pro
- Qidi Q1 Pro with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polymax-pc
- Qidi Q1 Pro with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polymax-petg
- Qidi Q1 Pro with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polymax-pla
- Qidi Q1 Pro with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polymide-copa-pa6
- Qidi Q1 Pro with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polysmooth
- Qidi Q1 Pro with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polysonic-pla
- Qidi Q1 Pro with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/polysupport-for-pla
- Qidi Q1 Pro with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pps-cf
- Qidi Q1 Pro with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pva
- Qidi Q1 Pro with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pva-polydissolve-s1
- Qidi Q1 Pro with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pva-polysupport-for-pa12
- Qidi Q1 Pro with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/pvb
- Qidi Q1 Pro with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/satin-panchroma-pla
- Qidi Q1 Pro with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/silk-abs
- Qidi Q1 Pro with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/silk-pla
- Qidi Q1 Pro with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/polymaker/wood-pla
- Qidi Q1 Pro with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/basic-pla
- Qidi Q1 Pro with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/conductive-pla
- Qidi Q1 Pro with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/fiber-ht-matte-pla
- Qidi Q1 Pro with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/fluorescent-pla
- Qidi Q1 Pro with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/glitter-petg
- Qidi Q1 Pro with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/glitter-pla
- Qidi Q1 Pro with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/glow-pla
- Qidi Q1 Pro with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/high-speed-pla
- Qidi Q1 Pro with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/iron-metal-composite-pla
- Qidi Q1 Pro with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/marble-pla
- Qidi Q1 Pro with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/matte-pla
- Qidi Q1 Pro with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/metal-composite-pla
- Qidi Q1 Pro with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/metallic-petg
- Qidi Q1 Pro with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/metallic-pla
- Qidi Q1 Pro with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/multicolor-pla
- Qidi Q1 Pro with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/nebula-pla
- Qidi Q1 Pro with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/opaque-pla
- Qidi Q1 Pro with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/pearl-pla
- Qidi Q1 Pro with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/petg
- Qidi Q1 Pro with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/petg-cf
- Qidi Q1 Pro with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/pla
- Qidi Q1 Pro with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/pla-cf
- Qidi Q1 Pro with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/pla-green-glow-in-the-dark
- Qidi Q1 Pro with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/recycled-petg
- Qidi Q1 Pro with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/recycled-pla
- Qidi Q1 Pro with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/satin-pla
- Qidi Q1 Pro with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/silk-petg
- Qidi Q1 Pro with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/silk-pla
- Qidi Q1 Pro with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/simply-petg
- Qidi Q1 Pro with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/stainless-steel-metal-composite-pla
- Qidi Q1 Pro with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/static-dissipative-carbon-fiber-pla
- Qidi Q1 Pro with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/static-dissipative-petg
- Qidi Q1 Pro with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/static-dissipative-pla
- Qidi Q1 Pro with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/steel-metal-composite-pla
- Qidi Q1 Pro with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/still-colorful-recycled-pla
- Qidi Q1 Pro with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/thermochromic-pla
- Qidi Q1 Pro with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/tpe
- Qidi Q1 Pro with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/tpu
- Qidi Q1 Pro with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/translucent-petg
- Qidi Q1 Pro with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/protopasta/translucent-pla
- Qidi Q1 Pro with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/asa
- Qidi Q1 Pro with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/blend-silk-pla
- Qidi Q1 Pro with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/matte-petg
- Qidi Q1 Pro with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/mystic-premium-pla
- Qidi Q1 Pro with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pa11-cf
- Qidi Q1 Pro with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pc
- Qidi Q1 Pro with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pc-blend
- Qidi Q1 Pro with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pc-cf
- Qidi Q1 Pro with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pei
- Qidi Q1 Pro with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pei-1010
- Qidi Q1 Pro with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/petg
- Qidi Q1 Pro with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/prusament/petg-cf
- Qidi Q1 Pro with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/petg-magnetite
- Qidi Q1 Pro with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/petg-tungsten
- Qidi Q1 Pro with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/petg-v0
- Qidi Q1 Pro with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pla
- Qidi Q1 Pro with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pla-recycled
- Qidi Q1 Pro with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pla-woodfill
- Qidi Q1 Pro with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pp-cf
- Qidi Q1 Pro with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pp-gf
- Qidi Q1 Pro with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/pvb
- Qidi Q1 Pro with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/rpla
- Qidi Q1 Pro with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/prusament/tpu-95a
- Qidi Q1 Pro with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-abs-ht-hf
- Qidi Q1 Pro with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-abs-cf-core
- Qidi Q1 Pro with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-abs-gf
- Qidi Q1 Pro with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-asa-gf
- Qidi Q1 Pro with Siraya Tech Fibreheart PET-CF: The listed nozzle maximum of 320 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-pet-cf
- Qidi Q1 Pro with Siraya Tech Fibreheart PET-GF: The listed nozzle maximum of 320 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-pet-gf
- Qidi Q1 Pro with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-petg-cf-pro
- Qidi Q1 Pro with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-ppa
- Qidi Q1 Pro with Siraya Tech Fibreheart PPA-CF: The listed nozzle maximum of 320 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-ppa-cf
- Qidi Q1 Pro with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle maximum of 320 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-ppa-cf-core
- Qidi Q1 Pro with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/fibreheart-tpu-gf
- Qidi Q1 Pro with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/flex-tpu-64d
- Qidi Q1 Pro with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/flex-tpu-85a
- Qidi Q1 Pro with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/flex-tpu-air-85a
- Qidi Q1 Pro with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/rebound-peba-85a
- Qidi Q1 Pro with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/rebound-peba-95a
- Qidi Q1 Pro with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/rebound-peba-air-95a
- Qidi Q1 Pro with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/roamr-tpu-air-hr-80a
- Qidi Q1 Pro with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/siraya-tech/roamr-tpu-air-hr-85a
- Qidi Q1 Pro with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/95a-high-speed-tpu
- Qidi Q1 Pro with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/abs
- Qidi Q1 Pro with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/abs-fr
- Qidi Q1 Pro with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/apla
- Qidi Q1 Pro with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/asa
- Qidi Q1 Pro with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/fluorescent-pla
- Qidi Q1 Pro with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/glow-petg
- Qidi Q1 Pro with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/glow-pla
- Qidi Q1 Pro with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/high-speed-abs
- Qidi Q1 Pro with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/high-speed-matte-petg
- Qidi Q1 Pro with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/high-speed-matte-pla
- Qidi Q1 Pro with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/high-speed-petg
- Qidi Q1 Pro with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/high-speed-pla
- Qidi Q1 Pro with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/high-speed-pla-marble
- Qidi Q1 Pro with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/high-speed-pla-plus
- Qidi Q1 Pro with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/luminous-glow-in-the-dark-petg
- Qidi Q1 Pro with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/matte-petg-cf
- Qidi Q1 Pro with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pa12-cf
- Qidi Q1 Pro with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pa6-easy-pa
- Qidi Q1 Pro with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pa6-cf
- Qidi Q1 Pro with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pa6-gf
- Qidi Q1 Pro with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pc
- Qidi Q1 Pro with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pc-abs
- Qidi Q1 Pro with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pcl
- Qidi Q1 Pro with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/peek
- Qidi Q1 Pro with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/petg
- Qidi Q1 Pro with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/petg-2-0
- Qidi Q1 Pro with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/petg-carbon-fiber
- Qidi Q1 Pro with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/petg-glow-in-the-dark-filament
- Qidi Q1 Pro with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla
- Qidi Q1 Pro with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-carbon-fiber
- Qidi Q1 Pro with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-cf
- Qidi Q1 Pro with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-classic
- Qidi Q1 Pro with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-galaxy
- Qidi Q1 Pro with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-glow-in-the-dark
- Qidi Q1 Pro with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-matte
- Qidi Q1 Pro with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-matte-dual-color
- Qidi Q1 Pro with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-rainbow
- Qidi Q1 Pro with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-silk
- Qidi Q1 Pro with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-transparent-rainbow
- Qidi Q1 Pro with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-twinkling
- Qidi Q1 Pro with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-wood
- Qidi Q1 Pro with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-meta
- Qidi Q1 Pro with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-plus
- Qidi Q1 Pro with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pla-plus-2-0
- Qidi Q1 Pro with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pp
- Qidi Q1 Pro with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pva
- Qidi Q1 Pro with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/pvb
- Qidi Q1 Pro with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/real-wood-fiber-pla
- Qidi Q1 Pro with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/silk-2-0
- Qidi Q1 Pro with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/silk-pla-plus
- Qidi Q1 Pro with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/silk-pla-plus-dual-color
- Qidi Q1 Pro with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/silk-pla-plus-four-color
- Qidi Q1 Pro with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/silk-pla-plus-rainbow
- Qidi Q1 Pro with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/silk-pla-plus-tri-color
- Qidi Q1 Pro with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/temperature-color-change-pla
- Qidi Q1 Pro with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/tpu
- Qidi Q1 Pro with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/tpu-silk
- Qidi Q1 Pro with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/tpu90a
- Qidi Q1 Pro with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/tpu95a
- Qidi Q1 Pro with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/transparent-clear-pla
- Qidi Q1 Pro with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/qidi-q1-pro/sunlu/upgrade-pla
- Sovol SV08 Max with Amolen 90A Flexible PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/90a-flexible-peba
- Sovol SV08 Max with Amolen Basic Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/basic-matte-pla
- Sovol SV08 Max with Amolen Basic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/basic-silk-pla
- Sovol SV08 Max with Amolen Conductive PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/conductive-pla
- Sovol SV08 Max with Amolen Crystal Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/crystal-transparent-pla
- Sovol SV08 Max with Amolen Dual Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/dual-color-matte-pla
- Sovol SV08 Max with Amolen Dual Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/dual-color-silk-pla
- Sovol SV08 Max with Amolen Galaxy Sparkle Shiny Galaxy Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/galaxy-sparkle-shiny-galaxy-silk-pla
- Sovol SV08 Max with Amolen Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/glow-pla
- Sovol SV08 Max with Amolen Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/glow-tpu
- Sovol SV08 Max with Amolen High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/high-speed-pla
- Sovol SV08 Max with Amolen Marble PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/marble-pla
- Sovol SV08 Max with Amolen Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/matte-pla
- Sovol SV08 Max with Amolen PEBA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/peba
- Sovol SV08 Max with Amolen PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/petg
- Sovol SV08 Max with Amolen PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/pla
- Sovol SV08 Max with Amolen PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/amolen/pla-cf
- Sovol SV08 Max with Amolen PLA Metal: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/pla-metal
- Sovol SV08 Max with Amolen Quad Color Silk PLA: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/quad-color-silk-pla
- Sovol SV08 Max with Amolen Rainbow Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/rainbow-silk-pla
- Sovol SV08 Max with Amolen S-Series Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/s-series-silk-pla
- Sovol SV08 Max with Amolen Shiny Glitter Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/shiny-glitter-silk-pla
- Sovol SV08 Max with Amolen Shiny Gradient Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/shiny-gradient-silk-pla
- Sovol SV08 Max with Amolen Silk GF PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/amolen/silk-gf-pla
- Sovol SV08 Max with Amolen Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/silk-pla
- Sovol SV08 Max with Amolen Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/temperature-color-change-pla
- Sovol SV08 Max with Amolen TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/tpu
- Sovol SV08 Max with Amolen Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/transparent-pla
- Sovol SV08 Max with Amolen Triple Color Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/triple-color-matte-pla
- Sovol SV08 Max with Amolen Triple Color Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/triple-color-silk-pla
- Sovol SV08 Max with Amolen UV Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/uv-color-change-pla
- Sovol SV08 Max with Amolen Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/amolen/wood-pla
- Sovol SV08 Max with Anycubic ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/abs
- Sovol SV08 Max with Anycubic ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/asa
- Sovol SV08 Max with Anycubic High-Speed PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/high-speed-pla
- Sovol SV08 Max with Anycubic PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/petg
- Sovol SV08 Max with Anycubic PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-basic
- Sovol SV08 Max with Anycubic PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-galaxy
- Sovol SV08 Max with Anycubic PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-marble
- Sovol SV08 Max with Anycubic PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-matte
- Sovol SV08 Max with Anycubic PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-metal
- Sovol SV08 Max with Anycubic PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-plus
- Sovol SV08 Max with Anycubic PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-silk
- Sovol SV08 Max with Anycubic PLA Silk Dual-Tricolor: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-silk-dual-tricolor
- Sovol SV08 Max with Anycubic PLA Special: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/pla-special
- Sovol SV08 Max with Anycubic TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/tpu
- Sovol SV08 Max with Anycubic Translucent PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/anycubic/translucent-petg
- Sovol SV08 Max with Bambu Lab ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/abs
- Sovol SV08 Max with Bambu Lab ABS-GF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/abs-gf
- Sovol SV08 Max with Bambu Lab ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/asa
- Sovol SV08 Max with Bambu Lab ASA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/asa-aero
- Sovol SV08 Max with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/asa-cf
- Sovol SV08 Max with Bambu Lab Matte ASA CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/matte-asa-cf
- Sovol SV08 Max with Bambu Lab PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pa12-cf
- Sovol SV08 Max with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pa6-cf
- Sovol SV08 Max with Bambu Lab PA6-GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pa6-gf
- Sovol SV08 Max with Bambu Lab PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/paht-cf
- Sovol SV08 Max with Bambu Lab PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pc
- Sovol SV08 Max with Bambu Lab PC FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pc-fr
- Sovol SV08 Max with Bambu Lab PET-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pet-cf
- Sovol SV08 Max with Bambu Lab PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/petg-basic
- Sovol SV08 Max with Bambu Lab PETG HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/petg-hf
- Sovol SV08 Max with Bambu Lab PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/petg-matte
- Sovol SV08 Max with Bambu Lab PETG Translucent: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/petg-translucent
- Sovol SV08 Max with Bambu Lab PETG-CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/petg-cf
- Sovol SV08 Max with Bambu Lab PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla
- Sovol SV08 Max with Bambu Lab PLA Aero: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-aero
- Sovol SV08 Max with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-basic
- Sovol SV08 Max with Bambu Lab PLA Basic Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-basic-gradient
- Sovol SV08 Max with Bambu Lab PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-galaxy
- Sovol SV08 Max with Bambu Lab PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-glow
- Sovol SV08 Max with Bambu Lab PLA Lite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-lite
- Sovol SV08 Max with Bambu Lab PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-marble
- Sovol SV08 Max with Bambu Lab PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-matte
- Sovol SV08 Max with Bambu Lab PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-metal
- Sovol SV08 Max with Bambu Lab PLA Pure: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-pure
- Sovol SV08 Max with Bambu Lab PLA Silk Dual Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-silk-dual-color
- Sovol SV08 Max with Bambu Lab PLA Silk Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-silk-multi-color
- Sovol SV08 Max with Bambu Lab PLA Silk+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-silk-plus
- Sovol SV08 Max with Bambu Lab PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-sparkle
- Sovol SV08 Max with Bambu Lab PLA Tough+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-tough-plus
- Sovol SV08 Max with Bambu Lab PLA Translucent: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-translucent
- Sovol SV08 Max with Bambu Lab PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-wood
- Sovol SV08 Max with Bambu Lab PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pla-cf
- Sovol SV08 Max with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/ppa-cf
- Sovol SV08 Max with Bambu Lab PPS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pps-cf
- Sovol SV08 Max with Bambu Lab PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/pva
- Sovol SV08 Max with Bambu Lab Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/silk-pla
- Sovol SV08 Max with Bambu Lab Support for ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/support-for-abs
- Sovol SV08 Max with Bambu Lab Support for PA/PET: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/support-for-pa-pet
- Sovol SV08 Max with Bambu Lab Support for PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/support-for-pla
- Sovol SV08 Max with Bambu Lab Support for PLA/PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/support-for-pla-petg
- Sovol SV08 Max with Bambu Lab TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/tpu
- Sovol SV08 Max with Bambu Lab TPU 85A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/tpu-85a
- Sovol SV08 Max with Bambu Lab TPU 90A: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 35 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/tpu-90a
- Sovol SV08 Max with Bambu Lab TPU 95A HF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/tpu-95a-hf
- Sovol SV08 Max with Bambu Lab TPU for AMS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/bambu-lab/tpu-for-ams
- Sovol SV08 Max with colorFabb ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/asa
- Sovol SV08 Max with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/cpe
- Sovol SV08 Max with colorFabb Economy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/economy-pla
- Sovol SV08 Max with colorFabb Glow PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/glow-pha
- Sovol SV08 Max with colorFabb High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/high-speed-pla
- Sovol SV08 Max with colorFabb LW-HT PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/lw-ht-pla
- Sovol SV08 Max with colorFabb Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/matte-pla
- Sovol SV08 Max with colorFabb PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/petg
- Sovol SV08 Max with colorFabb PHA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/pha
- Sovol SV08 Max with colorFabb PHA PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/pha-pla
- Sovol SV08 Max with colorFabb PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/pla
- Sovol SV08 Max with colorFabb r-Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/r-semi-pla
- Sovol SV08 Max with colorFabb Semi PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/semi-pla
- Sovol SV08 Max with colorFabb Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/silk-pla
- Sovol SV08 Max with colorFabb StoneFill PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/stonefill-pla
- Sovol SV08 Max with colorFabb TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/colorfabb/tpu
- Sovol SV08 Max with Creality 95A TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/95a-tpu
- Sovol SV08 Max with Creality ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/abs
- Sovol SV08 Max with Creality CR-PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/cr-petg
- Sovol SV08 Max with Creality CR-PLA Carbon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/cr-pla-carbon
- Sovol SV08 Max with Creality Ender Fast PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/ender-fast-pla
- Sovol SV08 Max with Creality Ender PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/ender-pla-plus
- Sovol SV08 Max with Creality HP ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hp-asa
- Sovol SV08 Max with Creality HP-TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hp-tpu
- Sovol SV08 Max with Creality Hyper ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-abs
- Sovol SV08 Max with Creality Hyper Luminous PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-luminous-pla
- Sovol SV08 Max with Creality Hyper PA6-CF: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-pa6-cf
- Sovol SV08 Max with Creality Hyper PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-pc
- Sovol SV08 Max with Creality Hyper PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-petg
- Sovol SV08 Max with Creality Hyper PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-pla
- Sovol SV08 Max with Creality Hyper PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-pla-cf
- Sovol SV08 Max with Creality Hyper Rainbow PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/hyper-rainbow-pla
- Sovol SV08 Max with Creality PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/petg
- Sovol SV08 Max with Creality PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/pla
- Sovol SV08 Max with Creality PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/creality/pla-cf
- Sovol SV08 Max with Creality PLA CR-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/pla-cr-wood
- Sovol SV08 Max with Creality PPA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/creality/ppa-cf
- Sovol SV08 Max with Creality Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/silk-pla
- Sovol SV08 Max with Creality Soleyin Basic PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/soleyin-basic-petg
- Sovol SV08 Max with Creality Soleyin Ultra PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/creality/soleyin-ultra-pla
- Sovol SV08 Max with ELEGOO ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/abs
- Sovol SV08 Max with ELEGOO ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/asa
- Sovol SV08 Max with ELEGOO Galaxy PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/galaxy-pla
- Sovol SV08 Max with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/paht-cf
- Sovol SV08 Max with ELEGOO PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pc
- Sovol SV08 Max with ELEGOO PC-FR: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pc-fr
- Sovol SV08 Max with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pet-cf
- Sovol SV08 Max with ELEGOO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/petg
- Sovol SV08 Max with ELEGOO PETG PRO: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/petg-pro
- Sovol SV08 Max with ELEGOO PETG Translucent: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/petg-translucent
- Sovol SV08 Max with ELEGOO PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/petg-cf
- Sovol SV08 Max with ELEGOO PETG-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/petg-gf
- Sovol SV08 Max with ELEGOO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla
- Sovol SV08 Max with ELEGOO PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-basic
- Sovol SV08 Max with ELEGOO PLA Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-glow
- Sovol SV08 Max with ELEGOO PLA Marble: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-marble
- Sovol SV08 Max with ELEGOO PLA MATTE: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-matte
- Sovol SV08 Max with ELEGOO PLA Metallic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-metallic
- Sovol SV08 Max with ELEGOO PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-plus
- Sovol SV08 Max with ELEGOO PLA PRO: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-pro
- Sovol SV08 Max with ELEGOO PLA Sparkle: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-sparkle
- Sovol SV08 Max with ELEGOO PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-wood
- Sovol SV08 Max with ELEGOO PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/pla-cf
- Sovol SV08 Max with ELEGOO RAPID PETG: The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/rapid-petg
- Sovol SV08 Max with ELEGOO RAPID PLA Plus: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/rapid-pla-plus
- Sovol SV08 Max with ELEGOO Rapid TPU 95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/rapid-tpu-95a
- Sovol SV08 Max with ELEGOO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/silk-pla
- Sovol SV08 Max with ELEGOO TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/elegoo/tpu-95a
- Sovol SV08 Max with Eryone ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/abs
- Sovol SV08 Max with Eryone ABS High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/abs-high-speed
- Sovol SV08 Max with Eryone ABS-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/abs-cf
- Sovol SV08 Max with Eryone ABS-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/abs-gf
- Sovol SV08 Max with Eryone ABS-PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/abs-pc
- Sovol SV08 Max with Eryone ABS+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/abs-plus
- Sovol SV08 Max with Eryone ASA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/asa
- Sovol SV08 Max with Eryone ASA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/asa-high-speed
- Sovol SV08 Max with Eryone ASA Light-Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/asa-light-weight
- Sovol SV08 Max with Eryone ASA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/asa-cf
- Sovol SV08 Max with Eryone ASA-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/asa-gf
- Sovol SV08 Max with Eryone PA12 Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pa12-nylon
- Sovol SV08 Max with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pa12-cf
- Sovol SV08 Max with Eryone PA12-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pa12-gf
- Sovol SV08 Max with Eryone PA6-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pa6-cf
- Sovol SV08 Max with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pa6-gf
- Sovol SV08 Max with Eryone PETG: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/petg
- Sovol SV08 Max with Eryone PETG-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/petg-cf
- Sovol SV08 Max with Eryone PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla
- Sovol SV08 Max with Eryone PLA Burnt Titanium: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-burnt-titanium
- Sovol SV08 Max with Eryone PLA Burnt Titanium Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-burnt-titanium-dual-color
- Sovol SV08 Max with Eryone PLA Burnt Titanium Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-burnt-titanium-rainbow
- Sovol SV08 Max with Eryone PLA Burnt Titanium Triple Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-burnt-titanium-triple-color
- Sovol SV08 Max with Eryone PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-galaxy
- Sovol SV08 Max with Eryone PLA High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-high-speed
- Sovol SV08 Max with Eryone PLA Light Weight: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-light-weight
- Sovol SV08 Max with Eryone PLA Luminous: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-luminous
- Sovol SV08 Max with Eryone PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-marble
- Sovol SV08 Max with Eryone PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte
- Sovol SV08 Max with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte-dual-color
- Sovol SV08 Max with Eryone PLA Matte Gradient: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte-gradient
- Sovol SV08 Max with Eryone PLA Matte High Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte-high-speed
- Sovol SV08 Max with Eryone PLA Matte High Speed Gradient Multi-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte-high-speed-gradient-multi-color
- Sovol SV08 Max with Eryone PLA Matte High Speed Rock Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte-high-speed-rock-rainbow
- Sovol SV08 Max with Eryone PLA Matte High Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte-high-speed-triple-color
- Sovol SV08 Max with Eryone PLA Matte Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-matte-rainbow
- Sovol SV08 Max with Eryone PLA Metallic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-metallic
- Sovol SV08 Max with Eryone PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-rainbow
- Sovol SV08 Max with Eryone PLA Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-silk
- Sovol SV08 Max with Eryone PLA Silk High-Speed Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-silk-high-speed-dual-color
- Sovol SV08 Max with Eryone PLA Silk High-Speed Quadruple: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-silk-high-speed-quadruple
- Sovol SV08 Max with Eryone PLA Silk High-Speed Triple-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-silk-high-speed-triple-color
- Sovol SV08 Max with Eryone PLA Silk Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-silk-rainbow
- Sovol SV08 Max with Eryone PLA Ultra Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-ultra-silk
- Sovol SV08 Max with Eryone PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-wood
- Sovol SV08 Max with Eryone PLA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-cf
- Sovol SV08 Max with Eryone PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-plus
- Sovol SV08 Max with Eryone PLA+ High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pla-plus-high-speed
- Sovol SV08 Max with Eryone PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pp
- Sovol SV08 Max with Eryone PP-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/eryone/pp-cf
- Sovol SV08 Max with Eryone TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/tpu
- Sovol SV08 Max with Eryone TPU 90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/tpu-90a
- Sovol SV08 Max with Eryone TPU High-Speed: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/tpu-high-speed
- Sovol SV08 Max with Eryone TPU Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/eryone/tpu-rainbow
- Sovol SV08 Max with eSUN 3D ABS+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/abs-plus
- Sovol SV08 Max with eSUN 3D ABS+CF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/abs-pluscf
- Sovol SV08 Max with eSUN 3D ABS+HS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/abs-plushs
- Sovol SV08 Max with eSUN 3D ASA+: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/asa-plus
- Sovol SV08 Max with eSUN 3D Dark Twinkling PLA Magic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/dark-twinkling-pla-magic
- Sovol SV08 Max with eSUN 3D ePAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/epaht-cf
- Sovol SV08 Max with eSUN 3D ePLA+HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/epla-plushs
- Sovol SV08 Max with eSUN 3D ESUN PETG Matte: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/esun-petg-matte
- Sovol SV08 Max with eSUN 3D Mystic Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/mystic-silk-pla
- Sovol SV08 Max with eSUN 3D PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pa12-cf
- Sovol SV08 Max with eSUN 3D PA6 PA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pa6-pa
- Sovol SV08 Max with eSUN 3D PA6 PA-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pa6-pa-cf
- Sovol SV08 Max with eSUN 3D Peak PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/peak-pla
- Sovol SV08 Max with eSUN 3D PET: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pet
- Sovol SV08 Max with eSUN 3D PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/petg
- Sovol SV08 Max with eSUN 3D PETG-Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/petg-basic
- Sovol SV08 Max with eSUN 3D PETG-Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/petg-matte
- Sovol SV08 Max with eSUN 3D PETG+CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/petg-pluscf
- Sovol SV08 Max with eSUN 3D PETG+HS: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/petg-plushs
- Sovol SV08 Max with eSUN 3D PLA-Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-basic
- Sovol SV08 Max with eSUN 3D PLA-CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-cf
- Sovol SV08 Max with eSUN 3D PLA-Chameleon: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-chameleon
- Sovol SV08 Max with eSUN 3D PLA-HS: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-hs
- Sovol SV08 Max with eSUN 3D PLA-Lite: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-lite
- Sovol SV08 Max with eSUN 3D PLA-Luminous: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-luminous
- Sovol SV08 Max with eSUN 3D PLA-Luminous Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-luminous-rainbow
- Sovol SV08 Max with eSUN 3D PLA-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-lw
- Sovol SV08 Max with eSUN 3D PLA-Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-marble
- Sovol SV08 Max with eSUN 3D PLA-Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-matte
- Sovol SV08 Max with eSUN 3D PLA-Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-metal
- Sovol SV08 Max with eSUN 3D PLA-Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-silk
- Sovol SV08 Max with eSUN 3D PLA-Silk Candy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-silk-candy
- Sovol SV08 Max with eSUN 3D PLA-Silk Magic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-silk-magic
- Sovol SV08 Max with eSUN 3D PLA-Silk Metal: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-silk-metal
- Sovol SV08 Max with eSUN 3D PLA-Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-silk-rainbow
- Sovol SV08 Max with eSUN 3D PLA-ST: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-st
- Sovol SV08 Max with eSUN 3D PLA-Stars: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-stars
- Sovol SV08 Max with eSUN 3D PLA-Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-wood
- Sovol SV08 Max with eSUN 3D PLA+: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-plus
- Sovol SV08 Max with eSUN 3D PLA+ CMYK: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pla-plus-cmyk
- Sovol SV08 Max with eSUN 3D PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/pva
- Sovol SV08 Max with eSUN 3D Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/silk-petg
- Sovol SV08 Max with eSUN 3D TPE-83A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/tpe-83a
- Sovol SV08 Max with eSUN 3D TPU-95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/tpu-95a
- Sovol SV08 Max with eSUN 3D TPU-LW: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/tpu-lw
- Sovol SV08 Max with eSUN 3D UV Change PLA UV Color Change: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/esun-3d/uv-change-pla-uv-color-change
- Sovol SV08 Max with extrudr Basic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/basic-pla
- Sovol SV08 Max with extrudr BioFusion PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/biofusion-pla
- Sovol SV08 Max with extrudr BioFusion Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/biofusion-silk-pla
- Sovol SV08 Max with extrudr DuraPro ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/durapro-abs
- Sovol SV08 Max with extrudr DuraPro ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/durapro-asa
- Sovol SV08 Max with extrudr DuraPro CF PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/durapro-cf-pa12
- Sovol SV08 Max with extrudr DuraPro Matte ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/durapro-matte-asa
- Sovol SV08 Max with extrudr DuraPro PA12: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/durapro-pa12
- Sovol SV08 Max with extrudr DuraPro PBT PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/durapro-pbt-pc
- Sovol SV08 Max with extrudr Flax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/flax-pla
- Sovol SV08 Max with extrudr FLEX Hard CF TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/flex-hard-cf-tpu
- Sovol SV08 Max with extrudr FLEX Hard TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/flex-hard-tpu
- Sovol SV08 Max with extrudr FLEX Medium TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/flex-medium-tpu
- Sovol SV08 Max with extrudr FLEX Semisoft TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/flex-semisoft-tpu
- Sovol SV08 Max with extrudr Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/glow-petg
- Sovol SV08 Max with extrudr GreenTEC Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/greentec-matte-pla
- Sovol SV08 Max with extrudr GreenTEC PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/greentec-pla
- Sovol SV08 Max with extrudr PCTG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/pctg
- Sovol SV08 Max with extrudr Pearl PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/pearl-pla
- Sovol SV08 Max with extrudr PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/petg
- Sovol SV08 Max with extrudr PLA NX2 Matt: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/pla-nx2-matt
- Sovol SV08 Max with extrudr Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/extrudr/wood-pla
- Sovol SV08 Max with Fillamentum ASA Extrafill: The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/fillamentum/asa-extrafill
- Sovol SV08 Max with Fillamentum CPE HG100: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/fillamentum/cpe-hg100
- Sovol SV08 Max with Fillamentum PLA Crystal Clear: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 55 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/fillamentum/pla-crystal-clear
- Sovol SV08 Max with Fillamentum PLA Extrafill: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/fillamentum/pla-extrafill
- Sovol SV08 Max with Hatchbox ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/abs
- Sovol SV08 Max with Hatchbox Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/glow-abs
- Sovol SV08 Max with Hatchbox Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/glow-pla
- Sovol SV08 Max with Hatchbox Metallic Finish PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/metallic-finish-pla
- Sovol SV08 Max with Hatchbox PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/petg
- Sovol SV08 Max with Hatchbox PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/pla
- Sovol SV08 Max with Hatchbox PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/pla-basic
- Sovol SV08 Max with Hatchbox PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/pla-cf
- Sovol SV08 Max with Hatchbox PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/pla-matte
- Sovol SV08 Max with Hatchbox PLA Max: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/pla-max
- Sovol SV08 Max with Hatchbox PLA Metal: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/pla-metal
- Sovol SV08 Max with Hatchbox PLA Pro: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/pla-pro
- Sovol SV08 Max with Hatchbox Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/silk-pla
- Sovol SV08 Max with Hatchbox TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/tpu
- Sovol SV08 Max with Hatchbox Transparent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/transparent-pla
- Sovol SV08 Max with Hatchbox UV Color Changing PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/uv-color-changing-pla
- Sovol SV08 Max with Hatchbox Wood PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/hatchbox/wood-pla
- Sovol SV08 Max with Inland ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/abs
- Sovol SV08 Max with Inland Carbon Fiber Nylon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/carbon-fiber-nylon
- Sovol SV08 Max with Inland Galaxy PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/galaxy-pla
- Sovol SV08 Max with Inland Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/glow-abs
- Sovol SV08 Max with Inland High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/high-speed-pla-plus
- Sovol SV08 Max with Inland PETG+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/petg-plus
- Sovol SV08 Max with Inland PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla
- Sovol SV08 Max with Inland PLA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla-basic
- Sovol SV08 Max with Inland PLA Chameleon: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla-chameleon
- Sovol SV08 Max with Inland Pla Glitter Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla-glitter-rainbow
- Sovol SV08 Max with Inland PLA Matte: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla-matte
- Sovol SV08 Max with Inland PLA Mystic Silk: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla-mystic-silk
- Sovol SV08 Max with Inland Pla Silk Rainbow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla-silk-rainbow
- Sovol SV08 Max with Inland PLA+: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/pla-plus
- Sovol SV08 Max with Inland Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/silk-pla
- Sovol SV08 Max with Inland TPU: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/inland/tpu
- Sovol SV08 Max with JAYO High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/jayo/high-speed-matte-pla
- Sovol SV08 Max with JAYO Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/jayo/matte-pla
- Sovol SV08 Max with JAYO PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/jayo/petg
- Sovol SV08 Max with JAYO PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/jayo/pla
- Sovol SV08 Max with JAYO PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/jayo/pla-plus
- Sovol SV08 Max with JAYO Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/jayo/silk-pla
- Sovol SV08 Max with JAYO TPU: The listed nozzle maximum of 231 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/jayo/tpu
- Sovol SV08 Max with Kingroon ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/abs
- Sovol SV08 Max with Kingroon Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/glow-pla
- Sovol SV08 Max with Kingroon High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/high-speed-petg
- Sovol SV08 Max with Kingroon High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/high-speed-pla
- Sovol SV08 Max with Kingroon Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/matte-pla
- Sovol SV08 Max with Kingroon PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/petg
- Sovol SV08 Max with Kingroon PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/petg-cf
- Sovol SV08 Max with Kingroon PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/pla
- Sovol SV08 Max with Kingroon PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/pla-basic
- Sovol SV08 Max with Kingroon PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/pla-cf
- Sovol SV08 Max with Kingroon Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/silk-pla
- Sovol SV08 Max with Kingroon TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/kingroon/tpu
- Sovol SV08 Max with Overture ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/abs
- Sovol SV08 Max with Overture ABS Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/abs-basic
- Sovol SV08 Max with Overture ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/asa
- Sovol SV08 Max with Overture ASA Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/asa-basic
- Sovol SV08 Max with Overture Easy Nylon: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/easy-nylon
- Sovol SV08 Max with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/glow-abs
- Sovol SV08 Max with Overture Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/glow-pla
- Sovol SV08 Max with Overture High Speed PETG Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/high-speed-petg
- Sovol SV08 Max with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/high-speed-pla
- Sovol SV08 Max with Overture High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/high-speed-tpu
- Sovol SV08 Max with Overture Luminous High Speed Glow TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/luminous-high-speed-glow-tpu
- Sovol SV08 Max with Overture Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/matte-pla
- Sovol SV08 Max with Overture PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pc
- Sovol SV08 Max with Overture PC Professional: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pc-professional
- Sovol SV08 Max with Overture PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/petg
- Sovol SV08 Max with Overture PETG Basic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/petg-basic
- Sovol SV08 Max with Overture PETG Refill: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/petg-refill
- Sovol SV08 Max with Overture PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla
- Sovol SV08 Max with Overture PLA Air: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-air
- Sovol SV08 Max with Overture PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-cf
- Sovol SV08 Max with Overture PLA Cream: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-cream
- Sovol SV08 Max with Overture PLA Easy: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-easy
- Sovol SV08 Max with Overture PLA Easy Glow: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-easy-glow
- Sovol SV08 Max with Overture PLA Plus: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-plus
- Sovol SV08 Max with Overture PLA Professional: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-professional
- Sovol SV08 Max with Overture PLA Refill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-refill
- Sovol SV08 Max with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-rock
- Sovol SV08 Max with Overture PLA Super: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-super
- Sovol SV08 Max with Overture PLA Turbo Rapid: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/pla-turbo-rapid
- Sovol SV08 Max with Overture Shimmer PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/shimmer-pla
- Sovol SV08 Max with Overture Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/silk-pla
- Sovol SV08 Max with Overture TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/overture/tpu
- Sovol SV08 Max with Polymaker ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/abs
- Sovol SV08 Max with Polymaker ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/asa
- Sovol SV08 Max with Polymaker CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/cpe
- Sovol SV08 Max with Polymaker Creator Special Edition PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/creator-special-edition-pla
- Sovol SV08 Max with Polymaker Draft PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/draft-pla
- Sovol SV08 Max with Polymaker Dual Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/dual-panchroma-matte-pla
- Sovol SV08 Max with Polymaker For Production Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/for-production-matte-pla
- Sovol SV08 Max with Polymaker Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/glow-pla
- Sovol SV08 Max with Polymaker Gradient Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/gradient-panchroma-pla
- Sovol SV08 Max with Polymaker HT PLA PRO: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/ht-pla-pro
- Sovol SV08 Max with Polymaker HT-PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/ht-pla
- Sovol SV08 Max with Polymaker HT-PLA-GF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/ht-pla-gf
- Sovol SV08 Max with Polymaker LW PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/lw-polylite-pla
- Sovol SV08 Max with Polymaker Metallic PolyLite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/metallic-polylite-pla
- Sovol SV08 Max with Polymaker Metallic Polylite Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/metallic-polylite-silk-abs
- Sovol SV08 Max with Polymaker Metallic Polylite Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/metallic-polylite-silk-pla
- Sovol SV08 Max with Polymaker Muted Panchroma Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/muted-panchroma-matte-pla
- Sovol SV08 Max with Polymaker Neon Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/neon-panchroma-pla
- Sovol SV08 Max with Polymaker PA12 CF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pa12-cf
- Sovol SV08 Max with Polymaker PA6 CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pa6-cf
- Sovol SV08 Max with Polymaker PA6 GF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pa6-gf
- Sovol SV08 Max with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/panchroma-cope
- Sovol SV08 Max with Polymaker Panchroma Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/panchroma-glow-pla
- Sovol SV08 Max with Polymaker Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/panchroma-pla
- Sovol SV08 Max with Polymaker Panchroma Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/panchroma-silk-pla
- Sovol SV08 Max with Polymaker PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pc
- Sovol SV08 Max with Polymaker PC-ABS: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pc-abs
- Sovol SV08 Max with Polymaker PC-PBT: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pc-pbt
- Sovol SV08 Max with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pet-cf
- Sovol SV08 Max with Polymaker PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/petg
- Sovol SV08 Max with Polymaker PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/petg-cf
- Sovol SV08 Max with Polymaker PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pla
- Sovol SV08 Max with Polymaker PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pla-cf
- Sovol SV08 Max with Polymaker PLA PolyCast: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pla-polycast
- Sovol SV08 Max with Polymaker Polyflex 95 Hf High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polyflex-95-hf-high-speed-tpu
- Sovol SV08 Max with Polymaker Polyflex TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polyflex-tpu
- Sovol SV08 Max with Polymaker Polylite ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polylite-abs
- Sovol SV08 Max with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polylite-asa
- Sovol SV08 Max with Polymaker Polylite PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polylite-pc
- Sovol SV08 Max with Polymaker Polylite PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polylite-petg
- Sovol SV08 Max with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polylite-pla
- Sovol SV08 Max with Polymaker Polylite PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polylite-pla-cf
- Sovol SV08 Max with Polymaker Polymaker PLA Pro: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polymaker-pla-pro
- Sovol SV08 Max with Polymaker Polymax PC: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polymax-pc
- Sovol SV08 Max with Polymaker Polymax PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polymax-petg
- Sovol SV08 Max with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polymax-pla
- Sovol SV08 Max with Polymaker Polymide Copa PA6: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polymide-copa-pa6
- Sovol SV08 Max with Polymaker PolySmooth: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polysmooth
- Sovol SV08 Max with Polymaker Polysonic PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polysonic-pla
- Sovol SV08 Max with Polymaker PolySupport for PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/polysupport-for-pla
- Sovol SV08 Max with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pps-cf
- Sovol SV08 Max with Polymaker PVA: The listed nozzle maximum of 210 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pva
- Sovol SV08 Max with Polymaker PVA PolyDissolve S1: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pva-polydissolve-s1
- Sovol SV08 Max with Polymaker PVA PolySupport for PA12: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pva-polysupport-for-pa12
- Sovol SV08 Max with Polymaker PVB: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/pvb
- Sovol SV08 Max with Polymaker Satin Panchroma PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/satin-panchroma-pla
- Sovol SV08 Max with Polymaker Silk ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/silk-abs
- Sovol SV08 Max with Polymaker Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/silk-pla
- Sovol SV08 Max with Polymaker Wood PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/polymaker/wood-pla
- Sovol SV08 Max with Protopasta Basic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/basic-pla
- Sovol SV08 Max with Protopasta Conductive PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/conductive-pla
- Sovol SV08 Max with Protopasta Fiber HT Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/fiber-ht-matte-pla
- Sovol SV08 Max with Protopasta Fluorescent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/fluorescent-pla
- Sovol SV08 Max with Protopasta Glitter PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/glitter-petg
- Sovol SV08 Max with Protopasta Glitter PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/glitter-pla
- Sovol SV08 Max with Protopasta Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/glow-pla
- Sovol SV08 Max with Protopasta High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/high-speed-pla
- Sovol SV08 Max with Protopasta Iron Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/iron-metal-composite-pla
- Sovol SV08 Max with Protopasta Marble PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/marble-pla
- Sovol SV08 Max with Protopasta Matte PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/matte-pla
- Sovol SV08 Max with Protopasta Metal Composite PLA: The listed nozzle maximum of 215 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/metal-composite-pla
- Sovol SV08 Max with Protopasta Metallic PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/metallic-petg
- Sovol SV08 Max with Protopasta Metallic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/metallic-pla
- Sovol SV08 Max with Protopasta Multicolor PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/multicolor-pla
- Sovol SV08 Max with Protopasta Nebula PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/nebula-pla
- Sovol SV08 Max with Protopasta Opaque PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/opaque-pla
- Sovol SV08 Max with Protopasta Pearl PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/pearl-pla
- Sovol SV08 Max with Protopasta PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/petg
- Sovol SV08 Max with Protopasta PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/petg-cf
- Sovol SV08 Max with Protopasta PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/pla
- Sovol SV08 Max with Protopasta PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/pla-cf
- Sovol SV08 Max with Protopasta PLA Green Glow-in-the-Dark: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/pla-green-glow-in-the-dark
- Sovol SV08 Max with Protopasta Recycled PETG: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/recycled-petg
- Sovol SV08 Max with Protopasta Recycled PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/recycled-pla
- Sovol SV08 Max with Protopasta Satin PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/satin-pla
- Sovol SV08 Max with Protopasta Silk PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/silk-petg
- Sovol SV08 Max with Protopasta Silk PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/silk-pla
- Sovol SV08 Max with Protopasta Simply PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/simply-petg
- Sovol SV08 Max with Protopasta Stainless Steel Metal Composite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/stainless-steel-metal-composite-pla
- Sovol SV08 Max with Protopasta Static Dissipative Carbon Fiber PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/static-dissipative-carbon-fiber-pla
- Sovol SV08 Max with Protopasta Static Dissipative PETG: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/static-dissipative-petg
- Sovol SV08 Max with Protopasta Static Dissipative PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/static-dissipative-pla
- Sovol SV08 Max with Protopasta Steel Metal Composite PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/steel-metal-composite-pla
- Sovol SV08 Max with Protopasta Still Colorful Recycled PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/still-colorful-recycled-pla
- Sovol SV08 Max with Protopasta Thermochromic PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/thermochromic-pla
- Sovol SV08 Max with Protopasta TPE: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/tpe
- Sovol SV08 Max with Protopasta TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/tpu
- Sovol SV08 Max with Protopasta Translucent PETG: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/translucent-petg
- Sovol SV08 Max with Protopasta Translucent PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/protopasta/translucent-pla
- Sovol SV08 Max with Prusament ASA: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/asa
- Sovol SV08 Max with Prusament Blend Silk PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/blend-silk-pla
- Sovol SV08 Max with Prusament Matte PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/matte-petg
- Sovol SV08 Max with Prusament Mystic Premium PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/mystic-premium-pla
- Sovol SV08 Max with Prusament PA11-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 115 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pa11-cf
- Sovol SV08 Max with Prusament PC: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pc
- Sovol SV08 Max with Prusament PC Blend: The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pc-blend
- Sovol SV08 Max with Prusament PC-CF: The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pc-cf
- Sovol SV08 Max with Prusament PEI: The listed nozzle temperature starts at 400 °C, above this printer's maximum of 300 °C. The listed bed temperature starts at 140 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pei
- Sovol SV08 Max with Prusament PEI 1010: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pei-1010
- Sovol SV08 Max with Prusament PETG: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/petg
- Sovol SV08 Max with Prusament PETG CF: The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/prusament/petg-cf
- Sovol SV08 Max with Prusament PETG Magnetite: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/petg-magnetite
- Sovol SV08 Max with Prusament PETG Tungsten: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/petg-tungsten
- Sovol SV08 Max with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/petg-v0
- Sovol SV08 Max with Prusament PLA: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pla
- Sovol SV08 Max with Prusament PLA Recycled: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pla-recycled
- Sovol SV08 Max with Prusament PLA Woodfill: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pla-woodfill
- Sovol SV08 Max with Prusament PP-CF: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pp-cf
- Sovol SV08 Max with Prusament PP-GF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pp-gf
- Sovol SV08 Max with Prusament PVB: The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/pvb
- Sovol SV08 Max with Prusament rPLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/rpla
- Sovol SV08 Max with Prusament TPU 95A: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/prusament/tpu-95a
- Sovol SV08 Max with Siraya Tech Fibreheart ABS HT HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-abs-ht-hf
- Sovol SV08 Max with Siraya Tech Fibreheart ABS-CF Core: The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-abs-cf-core
- Sovol SV08 Max with Siraya Tech Fibreheart ABS-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-abs-gf
- Sovol SV08 Max with Siraya Tech Fibreheart ASA-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-asa-gf
- Sovol SV08 Max with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-pet-cf
- Sovol SV08 Max with Siraya Tech Fibreheart PET-GF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-pet-gf
- Sovol SV08 Max with Siraya Tech Fibreheart PETG-CF Pro: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-petg-cf-pro
- Sovol SV08 Max with Siraya Tech Fibreheart PPA: The listed nozzle maximum of 300 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-ppa
- Sovol SV08 Max with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-ppa-cf
- Sovol SV08 Max with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-ppa-cf-core
- Sovol SV08 Max with Siraya Tech Fibreheart TPU-GF: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/fibreheart-tpu-gf
- Sovol SV08 Max with Siraya Tech Flex TPU 64D: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/flex-tpu-64d
- Sovol SV08 Max with Siraya Tech Flex TPU 85A: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/flex-tpu-85a
- Sovol SV08 Max with Siraya Tech Flex TPU Air 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/flex-tpu-air-85a
- Sovol SV08 Max with Siraya Tech Rebound PEBA 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/rebound-peba-85a
- Sovol SV08 Max with Siraya Tech Rebound PEBA 95A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/rebound-peba-95a
- Sovol SV08 Max with Siraya Tech Rebound PEBA Air 95A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/rebound-peba-air-95a
- Sovol SV08 Max with Siraya Tech Roamr TPU Air HR 80A: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/roamr-tpu-air-hr-80a
- Sovol SV08 Max with Siraya Tech Roamr TPU Air HR 85A: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 50 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/siraya-tech/roamr-tpu-air-hr-85a
- Sovol SV08 Max with SUNLU 95A High Speed TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/95a-high-speed-tpu
- Sovol SV08 Max with SUNLU ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/abs
- Sovol SV08 Max with SUNLU ABS-FR: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/abs-fr
- Sovol SV08 Max with SUNLU APLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/apla
- Sovol SV08 Max with SUNLU ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/asa
- Sovol SV08 Max with SUNLU Fluorescent PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/fluorescent-pla
- Sovol SV08 Max with SUNLU Glow PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/glow-petg
- Sovol SV08 Max with SUNLU Glow PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/glow-pla
- Sovol SV08 Max with SUNLU High Speed ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/high-speed-abs
- Sovol SV08 Max with SUNLU High Speed Matte PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/high-speed-matte-petg
- Sovol SV08 Max with SUNLU High Speed Matte PLA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/high-speed-matte-pla
- Sovol SV08 Max with SUNLU High Speed PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/high-speed-petg
- Sovol SV08 Max with SUNLU High Speed PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/high-speed-pla
- Sovol SV08 Max with SUNLU High Speed PLA Marble: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/high-speed-pla-marble
- Sovol SV08 Max with SUNLU High Speed PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/high-speed-pla-plus
- Sovol SV08 Max with SUNLU Luminous Glow In The Dark PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/luminous-glow-in-the-dark-petg
- Sovol SV08 Max with SUNLU Matte PETG CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/matte-petg-cf
- Sovol SV08 Max with SUNLU PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pa12-cf
- Sovol SV08 Max with SUNLU PA6 Easy PA: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pa6-easy-pa
- Sovol SV08 Max with SUNLU PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pa6-cf
- Sovol SV08 Max with SUNLU PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pa6-gf
- Sovol SV08 Max with SUNLU PC: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pc
- Sovol SV08 Max with SUNLU PC-ABS: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pc-abs
- Sovol SV08 Max with SUNLU PCL: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pcl
- Sovol SV08 Max with SUNLU PEEK: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/peek
- Sovol SV08 Max with SUNLU PETG: The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/petg
- Sovol SV08 Max with SUNLU PETG 2.0: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/petg-2-0
- Sovol SV08 Max with SUNLU PETG Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/petg-carbon-fiber
- Sovol SV08 Max with SUNLU PETG Glow In The Dark Filament: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/petg-glow-in-the-dark-filament
- Sovol SV08 Max with SUNLU PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla
- Sovol SV08 Max with SUNLU PLA Carbon Fiber: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-carbon-fiber
- Sovol SV08 Max with SUNLU PLA CF: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-cf
- Sovol SV08 Max with SUNLU PLA Classic: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-classic
- Sovol SV08 Max with SUNLU PLA Galaxy: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-galaxy
- Sovol SV08 Max with SUNLU PLA Glow In The Dark: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-glow-in-the-dark
- Sovol SV08 Max with SUNLU PLA Matte: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-matte
- Sovol SV08 Max with SUNLU PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-matte-dual-color
- Sovol SV08 Max with SUNLU PLA Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-rainbow
- Sovol SV08 Max with SUNLU PLA Silk: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-silk
- Sovol SV08 Max with SUNLU PLA Transparent Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-transparent-rainbow
- Sovol SV08 Max with SUNLU PLA Twinkling: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-twinkling
- Sovol SV08 Max with SUNLU PLA Wood: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-wood
- Sovol SV08 Max with SUNLU PLA-Meta: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-meta
- Sovol SV08 Max with SUNLU PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-plus
- Sovol SV08 Max with SUNLU PLA+ 2.0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pla-plus-2-0
- Sovol SV08 Max with SUNLU PP: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pp
- Sovol SV08 Max with SUNLU PVA: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pva
- Sovol SV08 Max with SUNLU PVB: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/pvb
- Sovol SV08 Max with SUNLU Real Wood Fiber PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/real-wood-fiber-pla
- Sovol SV08 Max with SUNLU Silk 2.0: The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/silk-2-0
- Sovol SV08 Max with SUNLU Silk PLA+: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/silk-pla-plus
- Sovol SV08 Max with SUNLU Silk PLA+ Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/silk-pla-plus-dual-color
- Sovol SV08 Max with SUNLU Silk PLA+ Four-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/silk-pla-plus-four-color
- Sovol SV08 Max with SUNLU Silk PLA+ Rainbow: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/silk-pla-plus-rainbow
- Sovol SV08 Max with SUNLU Silk PLA+ Tri-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/silk-pla-plus-tri-color
- Sovol SV08 Max with SUNLU Temperature Color Change PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/temperature-color-change-pla
- Sovol SV08 Max with SUNLU TPU: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/tpu
- Sovol SV08 Max with SUNLU TPU Silk: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/tpu-silk
- Sovol SV08 Max with SUNLU TPU90A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/tpu90a
- Sovol SV08 Max with SUNLU TPU95A: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/tpu95a
- Sovol SV08 Max with SUNLU Transparent Clear PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/transparent-clear-pla
- Sovol SV08 Max with SUNLU Upgrade PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. https://filamentfacts.com/printer/sovol-sv08-max/sunlu/upgrade-pla