Anycubic Kobra 3 Max
Anycubic Kobra 3 Max against 158 ABS products: 4 fit, 106 cannot reach the full recommended range, 19 cannot print this material at a recommended temperature, and 29 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ABS | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Bambu Lab ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Bambu Lab ABS-GF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Creality ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Creality Hyper ABS | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO ABS | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS-GF | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS-PC | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS+ | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ABS+ | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| eSUN 3D ABS+CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| eSUN 3D ABS+HS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| extrudr DuraPro ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Hatchbox ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Hatchbox Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Inland ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Inland Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Kingroon ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Overture ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Overture ABS Basic | — | Nozzle temperature is not in our current sources. | |
| Overture Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Polymaker ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Polymaker Metallic Polylite Silk ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Polymaker Polylite ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Polymaker Silk ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Siraya Tech Fibreheart ABS HT HF | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Siraya Tech Fibreheart ABS-CF Core | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Siraya Tech Fibreheart ABS-GF | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| SUNLU ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SUNLU ABS-FR | — | Nozzle temperature is not in our current sources. | |
| SUNLU High Speed ABS | — | Nozzle temperature is not in our current sources. | |
| SUNLU PC-ABS | — | Nozzle temperature is not in our current sources. | |
| 3D Fuel Pro ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DE Pirate Black | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DJAKE ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DPower ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ABS 3DXMax | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ABS 3DXStat ESD | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ABS 3DXTech | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ABS CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| 3DXTech ABS GF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Add-North ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Add-North rABS | Outside limits | The listed bed temperature starts at 105 °C (221 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Alzament ABS | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ABS Matte | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 75 °C (167 °F), is within that maximum. | |
| Ambrosia Über ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 75 °C (167 °F), is within that maximum. | |
| Atomic Filament ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Atomic Filament ABS CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| AURAPOL ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| AzureFilm ABS Plus | Outside limits | The listed bed temperature starts at 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| AzureFilm ABS Prime | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Buddy3D Matte ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| CC3D ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| COEX 3D ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Cookiecad ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Devil Design ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Eolas Prints ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fiberlogy ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fiberlogy ABS ESD | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy ABS PLUS | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy EASY ABS | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy R ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fiberlogy Refill ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Fiberlogy Refill R ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FilamentPM ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Filamentworld ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Filatech ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FLASHFORGE ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FLASHFORGE D Series ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FormFutura ABSpro | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ABSpro Flame Retardant | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura EasyFil ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FormFutura EasyFil ABS - Glow in the Dark | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| FormFutura Premium ABS Medical | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| FormFutura ReForm - rTitan | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura TitanX | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Francofil ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Geeetech ABS+ | Outside limits | The listed bed temperature starts at 95 °C (203 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Geeetech Upgrade ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Gizmo Dorks ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Gizmo Dorks ABS CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Gizmo Dorks Color Change ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Gizmo Dorks Fluorescent ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Gizmo Dorks Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Gizmo Dorks Low Odor ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Gizmo Dorks Thermochromic ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| GST3D ABS | — | Nozzle temperature is not in our current sources. | |
| IC3D ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| IEMAI ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| IEMAI CF-ABS | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| IEMAI ESD-ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Inslogic ABS FR V0 | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Inslogic ABS GF10 | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| kexcelled The K5 ABS T | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| LDO ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| MatterHackers ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Mosaic ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nebula ABS Art Glowing | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Art Marble Gray | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Art Thermo | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Tech 702 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil X Astro ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil X Candy ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil X Industrial ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil X Matt Matte ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Nobufil X Neon ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Paramount 3D ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Paramount 3D ABS CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PolyLite ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Metallic ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Neon ABS | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PrimaCreator Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PrimaCreator Primaselect ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PrimaCreator Primaselect Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PrimaCreator Primavalue ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PrimaSelect ABS | — | Nozzle temperature is not in our current sources. | |
| PrimaValue ABS | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| PrintedSolid ABS CF | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Professional LAB ABS | — | Nozzle temperature is not in our current sources. | |
| Push Plastic ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Push Plastic CF ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Push Plastic Matte ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| QIDI Tech ABS Metal Rapido | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| QIDI Tech ABS Rapido | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech ABS-GF25 | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech Odorless ABS Rapido | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| ROSA3D Filaments ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| ROSA3D Filaments ABS V0 FR | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| ROSA3D Filaments Matte ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SainSmart ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Sakata 3D ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SMART MATERIALS 3D ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SmartPrint ABS | — | Nozzle temperature is not in our current sources. | |
| Snapmaker ABS | — | Nozzle temperature is not in our current sources. | |
| SOVB 3D Fil ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| SOVB 3D Glow ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Spectrum ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Spectrum ABS FR V0 | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Spectrum ABS GP450 | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ABS Kevlar | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ABS Medical | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum smart ABS | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Tectonic 3D Aura ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| TEQStone ABS | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| TINMORRY ABS Pro | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Verbatim ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. | |
| Winkle ABS | Partial | The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Anycubic Kobra 3 Max against 158 ABS products: 4 fit, 106 cannot reach the full recommended range, 19 cannot print this material at a recommended temperature, and 29 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare