Fits
Bambu Lab PETG Matte on the Kobra 3 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle230–260 °C (446–500 °F)
- Bed65–75 °C (149–167 °F)
- Speedup to 250 mm/s
- Dry65 °C (149 °F) for 8 h
- Density1.37 g/cm³
Print at 230–260 °C (446–500 °F) nozzle, 65–75 °C (149–167 °F) bed. Dry 8 h at 65 °C (149 °F) if it's been open. Listed speed up to 250 mm/s.
Kobra 3 Max maximums: nozzle 300 °C (572 °F), bed 90 °C (194 °F).
Sources & notes
Anycubic Kobra 3 Max with Bambu Lab PETG Matte: Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PETG Matte technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
The quick start lists a 300 °C maximum nozzle temperature and a 90 °C maximum heatbed temperature. The Combo includes the ACE Pro.
The FAQ recommends setting up a warm chamber for ABS, so the stock printer is recorded as open. Nozzle alloy and drive type are not stated.
Questions
Can the Anycubic Kobra 3 Max reach the listed PETG Matte nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Kobra 3 Max reach the listed bed temperature?
The listed bed maximum of 75 °C (167 °F) is within this printer's maximum of 90 °C (194 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.