Bambu Lab
Bambu Lab H2S
Filter a material table with this printer. The source URL is under Sources & notes.
- Nozzle max350 °C (662 °F)
- Bed max120 °C (248 °F)
- Enclosureenclosed
- HardenedStock
- AMS / MMUAMS
Sources & notes
The Bambu Lab H2S lists a maximum nozzle temperature of 350 °C (662 °F) and lists a maximum bed temperature of 120 °C (248 °F), according to https://bambulab.com/en/h2s/tech-specs. Manufacturer page checked 2026-10-15.
Source checked 15 October 2026.
| Maximum nozzle | 350 °C (662 °F) |
|---|---|
| Maximum bed | 120 °C (248 °F) |
| Enclosure | enclosed |
| Stock nozzle hardened | Yes |
| Direct drive | — |
| AMS or MMU | AMS |
The H2S technical specifications list a hardened steel nozzle, a 350 °C maximum nozzle temperature, and a 120 °C maximum heatbed temperature.
The product page describes a front door, a top cover, and enclosure alignment, and it says PLA and PETG can be printed without opening the door.
The specification lists active chamber heating to 65 °C. Filament odometry is supported with AMS. The page does not say an AMS unit is included, and it does not name the extruder direct drive.
Questions
What maximum nozzle temperature does the Bambu Lab H2S list?
350 °C (662 °F), according to https://bambulab.com/en/h2s/tech-specs.
What maximum bed temperature does the Bambu Lab H2S list?
120 °C (248 °F), according to https://bambulab.com/en/h2s/tech-specs.
Is the H2S enclosed?
Recorded as enclosed.
Does the H2S ship with a hardened nozzle?
The source describes a hardened stock nozzle.
Materials on this printer
Open a material to see which listed limits the H2S can meet.