Partial
Polymaker PC-ABS on the P1P
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle250–270 °C (482–518 °F)
- Bed90–105 °C (194–221 °F)
- Speed—
- Dry75 °C (167 °F) for 6 h
- Density1.1 g/cm³
Print at 250–270 °C (482–518 °F) nozzle, 90–105 °C (194–221 °F) bed. Dry 6 h at 75 °C (167 °F) if it's been open.
P1P maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab P1P with Polymaker PC-ABS: The listed bed range reaches 105 °C (221 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed PC-ABS nozzle temperature?
The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F).
Can the P1P reach the listed bed temperature?
The listed bed range reaches 105 °C (221 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.