Fits
Polymaker Polymax PETG on the P1P
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C (428–482 °F)
- Bed70–90 °C (158–194 °F)
- Speed—
- Dry65 °C (149 °F) for 6 h
- Density1.25 g/cm³
Print at 220–250 °C (428–482 °F) nozzle, 70–90 °C (158–194 °F) bed. Dry 6 h at 65 °C (149 °F) if it's been open.
P1P maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab P1P with Polymaker Polymax PETG: P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed Polymax PETG nozzle temperature?
The listed nozzle maximum of 250 °C (482 °F) is within this printer's maximum of 300 °C (572 °F).
Can the P1P reach the listed bed temperature?
The listed bed maximum of 90 °C (194 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.