Partial

Siraya Tech Fibreheart PET-CF on the P1P

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle280–320 °C
Bed60–80 °C
Speed—
Dry—
Density1.3 g/cm³

Print at 280–320 °C nozzle, 60–80 °C bed.

Nozzle280–320 °C

Bed60–80 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

P1P maximums: nozzle 300 °C, bed 100 °C.

Filament page · P1P

Sources & notes

Bambu Lab P1P with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.

The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.

Questions

Can the Bambu Lab P1P reach the listed Fibreheart PET-CF nozzle temperature?

The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.

Can the P1P reach the listed bed temperature?

The listed bed maximum of 80 °C is within this printer's maximum of 100 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.