Partial
Bambu Lab PAHT-CF on the P1S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle260–290 °C (500–554 °F)
- Bed80–100 °C (176–212 °F)
- Speedup to 100 mm/s
- Dry80 °C (176 °F) maximum
- Density1.06 g/cm³
Print at 260–290 °C (500–554 °F) nozzle, 80–100 °C (176–212 °F) bed. Dry at 80 °C (176 °F) if it's been open. No drying time on the source. Listed speed up to 100 mm/s.
P1S maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab P1S with Bambu Lab PAHT-CF: This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PAHT-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The P1S specification table lists a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate. The shell is plastic and glass.
Bambu Lab describes the P1S as a fully enclosed body and says fiber-reinforced filament is not recommended until the extruder and hotend are upgraded.
The P1 series page describes a direct-drive extruder and AMS multi-color printing.
Questions
Can the Bambu Lab P1S reach the listed PAHT-CF nozzle temperature?
The listed nozzle maximum of 290 °C (554 °F) is within this printer's maximum of 300 °C (572 °F).
Can the P1S reach the listed bed temperature?
The listed bed maximum of 100 °C (212 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.