Fits
SUNLU PETG 2.0 on the P1S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle230–270 °C (446–518 °F)
- Bed70–80 °C (158–176 °F)
- Speed—
- Dry65 °C (149 °F) maximum
- Density1.23 g/cm³
Print at 230–270 °C (446–518 °F) nozzle, 70–80 °C (158–176 °F) bed. Dry at 65 °C (149 °F) if it's been open. No drying time on the source.
P1S maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab P1S with SUNLU PETG 2.0: P1S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The P1S specification table lists a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate. The shell is plastic and glass.
Bambu Lab describes the P1S as a fully enclosed body and says fiber-reinforced filament is not recommended until the extruder and hotend are upgraded.
The P1 series page describes a direct-drive extruder and AMS multi-color printing.
Questions
Can the Bambu Lab P1S reach the listed PETG 2.0 nozzle temperature?
The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F).
Can the P1S reach the listed bed temperature?
The listed bed maximum of 80 °C (176 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.