# Bambu Lab PLA Basic print settings on the Bambu Lab X1 Carbon

X1 Carbon can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Print at 190–230 °C (374–446 °F) nozzle, 35–45 °C (95–113 °F) bed. Dry 8 h at 50 °C (122 °F) if it's been open. Listed speed up to 300 mm/s.

## Sources & notes

Bambu Lab X1 Carbon with Bambu Lab PLA Basic: X1 Carbon can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Source: https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943
Manufacturer page checked: 2026-10-14