Bambu Lab X1 Carbon
Bambu Lab X1 Carbon against 62 PA/CF products: 0 fit, 1 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 61 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Bambu Lab PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| Bambu Lab PA6-CF | — | Whether an enclosure is required is not in our current sources. | |
| Bambu Lab PAHT-CF | — | Whether an enclosure is required is not in our current sources. | |
| Creality Hyper PA6-CF | — | Whether an enclosure is required is not in our current sources. | |
| ELEGOO PAHT-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone PA12-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone PA6-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ePAHT-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PA12-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PA6 PA-CF | — | Nozzle temperature is not in our current sources. | |
| extrudr DuraPro CF PA12 | — | Whether an enclosure is required is not in our current sources. | |
| Inland Carbon Fiber Nylon | — | Nozzle temperature is not in our current sources. | |
| Polymaker PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| Polymaker PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| Prusament PA11-CF | Partial | The listed bed range reaches 115 °C, above this printer's maximum of 110 °C. This printer cannot reach the full recommended range. The low end, 95 °C, is within that maximum. | |
| SUNLU PA12-CF | — | Nozzle temperature is not in our current sources. | |
| SUNLU PA6-CF | — | Whether an enclosure is required is not in our current sources. | |
| 3DEA PA6-CF | — | Whether an enclosure is required is not in our current sources. | |
| 3DXTech PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| 3DXTech PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| AzureFilm PA6 Carbonfiber nylon | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Nylon PA12+CF15 | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Nylon PA12+CF5 | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| Fiberon PA12-CF10 | — | Nozzle temperature is not in our current sources. | |
| Fiberon PA6-CF20 | — | Nozzle temperature is not in our current sources. | |
| Fiberon PA612-CF15 | — | Nozzle temperature is not in our current sources. | |
| FiberThree F3 PA CF | — | Whether an enclosure is required is not in our current sources. | |
| FiberThree F3 PA CF Lite | — | Whether an enclosure is required is not in our current sources. | |
| FiberThree PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| FiberThree PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| FilamentPM PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| FilamentPM PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura LUVOCOM 3F PAHT CF 9742 | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura LUVOCOM 3F PAHT CF 9891 | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura STYX PA6-CF15 | — | Whether an enclosure is required is not in our current sources. | |
| IEMAI CF-PA12 | — | Whether an enclosure is required is not in our current sources. | |
| IEMAI CF-PA6 | — | Whether an enclosure is required is not in our current sources. | |
| Inslogic PA12-CF | — | Whether an enclosure is required is not in our current sources. | |
| Inslogic PA6-CF | — | Whether an enclosure is required is not in our current sources. | |
| MatterHackers PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| Paramount 3D PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| PrimaCreator PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| PrimaCreator PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| PrimaCreator Primaselect PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| PrimaCreator Primaselect PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| PrimaSelect PA6 NylonPower | — | Nozzle temperature is not in our current sources. | |
| Print With Smile PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| Professional LAB PA12-CF15 | — | Nozzle temperature is not in our current sources. | |
| QIDI Tech PA12-CF | — | Whether an enclosure is required is not in our current sources. | |
| ROSA3D Filaments PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| SainSmart PA12 CF | — | Whether an enclosure is required is not in our current sources. | |
| SainSmart PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| SmartPrint PA12-CF15 | — | Nozzle temperature is not in our current sources. | |
| Spectrum PA12 CF15 | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PA6 CF15 | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PA6 Low Warp CF15S | — | Whether an enclosure is required is not in our current sources. | |
| Tectonic 3D PA11 CF | — | Whether an enclosure is required is not in our current sources. | |
| Tectonic 3D PA6 CF | — | Whether an enclosure is required is not in our current sources. | |
| Tectonic 3D Zephyr CF MC CF PA11 | — | Whether an enclosure is required is not in our current sources. | |
| TINMORRY PA6 CF | — | Whether an enclosure is required is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab X1 Carbon against 62 PA/CF products: 0 fit, 1 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 61 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare