Partial
Siraya Tech Fibreheart PPA-CF Core on the X1 Carbon
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle280–320 °C (536–608 °F)
- Bed80 °C (176 °F)
- Speed—
- Dry—
- Density1.23 g/cm³
Print at 280–320 °C (536–608 °F) nozzle, 80 °C (176 °F) bed.
X1 Carbon maximums: nozzle 300 °C (572 °F), bed 110 °C (230 °F).
Sources & notes
Bambu Lab X1 Carbon with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C (608 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot reach the full recommended range. The low end, 280 °C (536 °F), is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The tech specs PDF lists a hardened steel nozzle and a 300 °C maximum hot end temperature.
Maximum build plate temperature is listed as 110 °C at 220 V and 120 °C at 110 V. The number stored here is 110.
The PDF lists a chamber monitoring camera and says filament odometry is optional with AMS. It does not use the word enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab X1 Carbon reach the listed Fibreheart PPA-CF Core nozzle temperature?
The listed nozzle range reaches 320 °C (608 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot reach the full recommended range. The low end, 280 °C (536 °F), is within that maximum.
Can the X1 Carbon reach the listed bed temperature?
The listed bed maximum of 80 °C (176 °F) is within this printer's maximum of 110 °C (230 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.