Bambu Lab X2D
Bambu Lab X2D against 62 PA/CF products: 45 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 17 are missing an essential check. Manufacturer page checked 15 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Bambu Lab PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PA6-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PAHT-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Hyper PA6-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro CF PA12 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament PA11-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PA6-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PA6-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree F3 PA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree F3 PA CF Lite | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura LUVOCOM 3F PAHT CF 9742 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura LUVOCOM 3F PAHT CF 9891 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura STYX PA6-CF15 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-PA12 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-PA6 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic PA12-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic PA6-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Print With Smile PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PA12-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart PA12 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PA12 CF15 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PA6 CF15 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PA6 Low Warp CF15S | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D PA11 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Zephyr CF MC CF PA11 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PA6 CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PAHT-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone PA12-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone PA6-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ePAHT-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PA12-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PA6 PA-CF | — | Nozzle temperature is not in our current sources. | |
| Inland Carbon Fiber Nylon | — | Nozzle temperature is not in our current sources. | |
| SUNLU PA12-CF | — | Nozzle temperature is not in our current sources. | |
| AzureFilm PA6 Carbonfiber nylon | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Nylon PA12+CF15 | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Nylon PA12+CF5 | — | Nozzle temperature is not in our current sources. | |
| Fiberon PA12-CF10 | — | Nozzle temperature is not in our current sources. | |
| Fiberon PA6-CF20 | — | Nozzle temperature is not in our current sources. | |
| Fiberon PA612-CF15 | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PA6 NylonPower | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PA12-CF15 | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PA12-CF15 | — | Nozzle temperature is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab X2D against 62 PA/CF products: 45 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 17 are missing an essential check. Manufacturer page checked 15 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare