Outside limits
Prusament PEI on the X2D
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle400–420 °C (752–788 °F)
- Bed140–160 °C (284–320 °F)
- Speed—
- Dry—
- Density1.27 g/cm³
Print at 400–420 °C (752–788 °F) nozzle, 140–160 °C (284–320 °F) bed.
X2D maximums: nozzle 300 °C (572 °F), bed 120 °C (248 °F).
Sources & notes
Bambu Lab X2D with Prusament PEI: The listed nozzle temperature starts at 400 °C (752 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot print this material at the recommended nozzle temperature.
Dataset imported 13 October 2026. Manufacturer page checked 15 October 2026.
Filament source · Printer source · Filament JSON
The X2D technical specifications list a hardened steel nozzle, a 300 °C maximum nozzle temperature, and a 120 °C maximum heatbed temperature.
The same table lists a door sensor and an outer frame of plastic, glass, and metal. The X2D product comparison labels the machine enclosed.
Filament odometry is listed as supported with AMS. The specification does not say an AMS unit is included, and it does not name the extruder direct drive.
Questions
Can the Bambu Lab X2D reach the listed PEI nozzle temperature?
The listed nozzle temperature starts at 400 °C (752 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot print this material at the recommended nozzle temperature.
Can the X2D reach the listed bed temperature?
The listed bed temperature starts at 140 °C (284 °F), above this printer's maximum of 120 °C (248 °F). This printer cannot print this material at the recommended bed temperature.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.