Bambu Lab ASA-CF on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed80–100 °C
- Speedup to 250 mm/s
- Dry80 °C for 8 h
- Density1.02 g/cm³
Bed 80–100 °C. No nozzle temperature on the source. Dry 8 h at 80 °C if it's been open. Listed speed up to 250 mm/s.
K1C maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Creality K1C with Bambu Lab ASA-CF: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab ASA-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed ASA-CF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the K1C reach the listed bed temperature?
The listed bed maximum of 100 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.