Bambu Lab PETG HF on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle230–260 °C
- Bed65–75 °C
- Speedup to 300 mm/s
- Dry65 °C for 8 h
- Density1.28 g/cm³
Print at 230–260 °C nozzle, 65–75 °C bed. Dry 8 h at 65 °C if it's been open. Listed speed up to 300 mm/s.
K1C maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Creality K1C with Bambu Lab PETG HF: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PETG HF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed PETG HF nozzle temperature?
The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C.
Can the K1C reach the listed bed temperature?
The listed bed maximum of 75 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.