Fits
Bambu Lab PLA Aero on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle210–260 °C (410–500 °F)
- Bed35–45 °C (95–113 °F)
- Speedup to 180 mm/s
- Dry55 °C (131 °F) for 8 h
- Density1.21 g/cm³
Print at 210–260 °C (410–500 °F) nozzle, 35–45 °C (95–113 °F) bed. Dry 8 h at 55 °C (131 °F) if it's been open. Listed speed up to 180 mm/s.
K1C maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Creality K1C with Bambu Lab PLA Aero: K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PLA Aero technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed PLA Aero nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 300 °C (572 °F).
Can the K1C reach the listed bed temperature?
The listed bed maximum of 45 °C (113 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.