Fits
Bambu Lab TPU 85A on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle200–250 °C (392–482 °F)
- Bed30–35 °C (86–95 °F)
- Speedup to 200 mm/s
- Dry70 °C (158 °F) maximum
- Density1.18 g/cm³
Print at 200–250 °C (392–482 °F) nozzle, 30–35 °C (86–95 °F) bed. Dry at 70 °C (158 °F) if it's been open. No drying time on the source. Listed speed up to 200 mm/s.
K1C maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Creality K1C with Bambu Lab TPU 85A: K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed TPU 85A nozzle temperature?
The listed nozzle maximum of 250 °C (482 °F) is within this printer's maximum of 300 °C (572 °F).
Can the K1C reach the listed bed temperature?
The listed bed maximum of 35 °C (95 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.