Partial
Siraya Tech Fibreheart PPA-CF Core on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle280–320 °C (536–608 °F)
- Bed80 °C (176 °F)
- Speed—
- Dry—
- Density1.23 g/cm³
Print at 280–320 °C (536–608 °F) nozzle, 80 °C (176 °F) bed.
K1C maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Creality K1C with Siraya Tech Fibreheart PPA-CF Core: The listed nozzle range reaches 320 °C (608 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot reach the full recommended range. The low end, 280 °C (536 °F), is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed Fibreheart PPA-CF Core nozzle temperature?
The listed nozzle range reaches 320 °C (608 °F), above this printer's maximum of 300 °C (572 °F). This printer cannot reach the full recommended range. The low end, 280 °C (536 °F), is within that maximum.
Can the K1C reach the listed bed temperature?
The listed bed maximum of 80 °C (176 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.