Partial
Bambu Lab ABS-GF on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle230–260 °C (446–500 °F)
- Bed90–110 °C (194–230 °F)
- Speedup to 180 mm/s
- Dry80 °C (176 °F) for 8 h
- Density1.08 g/cm³
Print at 230–260 °C (446–500 °F) nozzle, 90–110 °C (194–230 °F) bed. Dry 8 h at 80 °C (176 °F) if it's been open. Listed speed up to 180 mm/s.
CORE One+ maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa CORE One+ with Bambu Lab ABS-GF: This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed ABS-GF nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 290 °C (554 °F).
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 110 °C (230 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.