Partial
Creality Hyper PA6-CF on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle280–300 °C
- Bed80 °C
- Speed—
- Dry80 °C maximum
- Density1.25 g/cm³
Print at 280–300 °C nozzle, 80 °C bed. Dry at 80 °C if it's been open. No drying time on the source.
CORE One+ maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa CORE One+ with Creality Hyper PA6-CF: The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed Hyper PA6-CF nozzle temperature?
The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 80 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.