Partial
ELEGOO PET-CF on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle260–290 °C (500–554 °F)
- Bed90–110 °C (194–230 °F)
- Speed—
- Dry85 °C (185 °F) maximum
- Density1.32 g/cm³
Print at 260–290 °C (500–554 °F) nozzle, 90–110 °C (194–230 °F) bed. Dry at 85 °C (185 °F) if it's been open. No drying time on the source.
CORE One+ maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa CORE One+ with ELEGOO PET-CF: This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed PET-CF nozzle temperature?
The listed nozzle maximum of 290 °C (554 °F) is within this printer's maximum of 290 °C (554 °F).
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 110 °C (230 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.