Prusa CORE One+
Prusa CORE One+ against 295 PETG products: 0 fit, 67 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 228 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Amolen PETG | — | Whether an enclosure is required is not in our current sources. | |
| Anycubic PETG | — | Nozzle temperature is not in our current sources. | |
| Anycubic Translucent PETG | — | Nozzle temperature is not in our current sources. | |
| Bambu Lab PETG Basic | — | Nozzle temperature is not in our current sources. | |
| Bambu Lab PETG HF | — | Whether an enclosure is required is not in our current sources. | |
| Bambu Lab PETG Matte | — | Whether an enclosure is required is not in our current sources. | |
| Bambu Lab PETG Translucent | — | Whether an enclosure is required is not in our current sources. | |
| Bambu Lab PETG-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| colorFabb PETG | — | Whether an enclosure is required is not in our current sources. | |
| Creality CR-PETG | — | Whether an enclosure is required is not in our current sources. | |
| Creality Hyper PETG | — | Nozzle temperature is not in our current sources. | |
| Creality PETG | — | Whether an enclosure is required is not in our current sources. | |
| Creality Soleyin Basic PETG | — | Bed temperature is not in our current sources. | |
| ELEGOO PETG | — | Whether an enclosure is required is not in our current sources. | |
| ELEGOO PETG PRO | — | Whether an enclosure is required is not in our current sources. | |
| ELEGOO PETG Translucent | — | Whether an enclosure is required is not in our current sources. | |
| ELEGOO PETG-CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| ELEGOO PETG-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ELEGOO RAPID PETG | — | Whether an enclosure is required is not in our current sources. | |
| Eryone PETG | — | Nozzle temperature is not in our current sources. | |
| Eryone PETG-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D ESUN PETG Matte | — | Whether an enclosure is required is not in our current sources. | |
| eSUN 3D PETG | — | Whether an enclosure is required is not in our current sources. | |
| eSUN 3D PETG-Basic | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PETG-Matte | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PETG+CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D PETG+HS | — | Whether an enclosure is required is not in our current sources. | |
| eSUN 3D Silk PETG | — | Whether an enclosure is required is not in our current sources. | |
| extrudr Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| extrudr PETG | — | Whether an enclosure is required is not in our current sources. | |
| Hatchbox PETG | — | Whether an enclosure is required is not in our current sources. | |
| Inland PETG+ | — | Nozzle temperature is not in our current sources. | |
| JAYO PETG | — | Whether an enclosure is required is not in our current sources. | |
| Kingroon High Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| Kingroon PETG | — | Whether an enclosure is required is not in our current sources. | |
| Kingroon PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Overture High Speed PETG Refill | — | Nozzle temperature is not in our current sources. | |
| Overture PETG | — | Whether an enclosure is required is not in our current sources. | |
| Overture PETG Basic | — | Nozzle temperature is not in our current sources. | |
| Overture PETG Refill | — | Whether an enclosure is required is not in our current sources. | |
| Polymaker PETG | — | Whether an enclosure is required is not in our current sources. | |
| Polymaker PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Polymaker Polylite PETG | — | Whether an enclosure is required is not in our current sources. | |
| Polymaker Polymax PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta Glitter PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta Metallic PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Protopasta Recycled PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta Silk PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta Simply PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta Static Dissipative PETG | — | Whether an enclosure is required is not in our current sources. | |
| Protopasta Translucent PETG | — | Whether an enclosure is required is not in our current sources. | |
| Prusament Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| Prusament PETG | — | Whether an enclosure is required is not in our current sources. | |
| Prusament PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Prusament PETG Magnetite | — | Nozzle temperature is not in our current sources. | |
| Prusament PETG Tungsten | — | Nozzle temperature is not in our current sources. | |
| Prusament PETG V0 | — | Nozzle temperature is not in our current sources. | |
| Siraya Tech Fibreheart PETG-CF Pro | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| SUNLU High Speed Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| SUNLU High Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| SUNLU Luminous Glow In The Dark PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| SUNLU Matte PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU PETG | — | Whether an enclosure is required is not in our current sources. | |
| SUNLU PETG 2.0 | — | Whether an enclosure is required is not in our current sources. | |
| SUNLU PETG Carbon Fiber | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU PETG Glow In The Dark Filament | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| 3D Fuel Pro PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3D Printing Canada Budget PETG | — | Nozzle temperature is not in our current sources. | |
| 3DE Premium | — | Whether an enclosure is required is not in our current sources. | |
| 3DEA PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DEA PETG Translucent | — | Whether an enclosure is required is not in our current sources. | |
| 3DJAKE Easy Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DJAKE easy PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DJAKE Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| 3DJAKE PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DO PETG | — | Nozzle temperature is not in our current sources. | |
| 3DPower Basic PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DPower Hyper Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DPower PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DPower Select PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DXTech PETG | — | Whether an enclosure is required is not in our current sources. | |
| 3DXTech PETG 3DXStat EMI | — | Whether an enclosure is required is not in our current sources. | |
| 3DXTech PETG 3DXStat ESD | — | Whether an enclosure is required is not in our current sources. | |
| 3DXTech PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Add-North ESD PETG | — | Whether an enclosure is required is not in our current sources. | |
| Add-North Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| Add-North PETG | — | Whether an enclosure is required is not in our current sources. | |
| Add-North PETG Economy | — | Whether an enclosure is required is not in our current sources. | |
| Add-North PETG Flame Retardant V0 | — | Whether an enclosure is required is not in our current sources. | |
| Add-North PETG Koltron G1 | Partial | The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum. | |
| Add-North PETG PRO Matte | — | Whether an enclosure is required is not in our current sources. | |
| Add-North PETG Rigid X | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Add-North rPETG Matte | — | Whether an enclosure is required is not in our current sources. | |
| Alzament PETG | — | Whether an enclosure is required is not in our current sources. | |
| Alzament PETG Hyper | — | Nozzle temperature is not in our current sources. | |
| Alzament PETG-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Ambrosia PETG | — | Whether an enclosure is required is not in our current sources. | |
| ATARAXIA ART PETG | — | Whether an enclosure is required is not in our current sources. | |
| Atomic Filament PETG | — | Whether an enclosure is required is not in our current sources. | |
| Atomic Filament PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| AURAPOL ARMY PETG | — | Whether an enclosure is required is not in our current sources. | |
| AURAPOL PETG | — | Whether an enclosure is required is not in our current sources. | |
| AzureFilm PETG | — | Nozzle temperature is not in our current sources. | |
| Buddy3D PETG | — | Whether an enclosure is required is not in our current sources. | |
| CC3D Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| CC3D PETG | — | Whether an enclosure is required is not in our current sources. | |
| CC3D PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| CHCKX PETG | — | Whether an enclosure is required is not in our current sources. | |
| Cookiecad PETG | — | Whether an enclosure is required is not in our current sources. | |
| Dancyn 3D Prints PETG HF | — | Whether an enclosure is required is not in our current sources. | |
| Das Filament PETG | — | Whether an enclosure is required is not in our current sources. | |
| Devil Design Galaxy PETG | — | Whether an enclosure is required is not in our current sources. | |
| Devil Design PETG | — | Whether an enclosure is required is not in our current sources. | |
| Dremel Digilab PETG | — | Whether an enclosure is required is not in our current sources. | |
| Dremel PETG | — | Whether an enclosure is required is not in our current sources. | |
| EasyPrint PETG | — | Nozzle temperature is not in our current sources. | |
| EconoFil PETG | — | Whether an enclosure is required is not in our current sources. | |
| EconoFil PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eolas Prints PETG | — | Whether an enclosure is required is not in our current sources. | |
| EPAX High Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| Fiberlogy Easy PET-G | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Easy PETG | — | Whether an enclosure is required is not in our current sources. | |
| Fiberlogy Matt PET G Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| Fiberlogy PET-G | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PET-G ESD | — | Whether an enclosure is required is not in our current sources. | |
| Fiberlogy PET-G V0 PETG | — | Whether an enclosure is required is not in our current sources. | |
| Fiberlogy PETG | — | Whether an enclosure is required is not in our current sources. | |
| Fiberlogy PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberlogy Refill Easy PET-G | — | Nozzle temperature is not in our current sources. | |
| Fiberon PETG-ESD | — | Nozzle temperature is not in our current sources. | |
| Fiberon PETG-rCF08 | — | Nozzle temperature is not in our current sources. | |
| FilamentPM ESD PETG | — | Whether an enclosure is required is not in our current sources. | |
| FilamentPM PETG | — | Whether an enclosure is required is not in our current sources. | |
| FilamentPM PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FilamentPM Silk PETG | — | Whether an enclosure is required is not in our current sources. | |
| Filamentree PETG | — | Whether an enclosure is required is not in our current sources. | |
| Filamentree PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Filamentworld Metallic Silk PETG | — | Whether an enclosure is required is not in our current sources. | |
| Filamentworld PETG | — | Whether an enclosure is required is not in our current sources. | |
| Filkemp PETG | — | Whether an enclosure is required is not in our current sources. | |
| FLASHFORGE Chameleon PETG | — | Whether an enclosure is required is not in our current sources. | |
| FLASHFORGE High Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| FLASHFORGE Metallic Rapid Silk PETG | — | Whether an enclosure is required is not in our current sources. | |
| FLASHFORGE PETG | — | Whether an enclosure is required is not in our current sources. | |
| FLASHFORGE PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FLASHFORGE Rapid PETG | — | Whether an enclosure is required is not in our current sources. | |
| FLASHFORGE Silk PETG | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura Bulk PETG | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura CarbonFil | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FormFutura CarbonFil CF03 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura EasyFil ePETG | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura Hdglass | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura PETG CarbonFil | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura PETG Hdglass | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura Premium PETG Flame Retardant | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura ReFill PETG | — | Whether an enclosure is required is not in our current sources. | |
| Francofil PETG | — | Whether an enclosure is required is not in our current sources. | |
| Francofil PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Geeetech PETG | — | Whether an enclosure is required is not in our current sources. | |
| Gizmo Dorks PETG | — | Whether an enclosure is required is not in our current sources. | |
| GST3D PETG | — | Nozzle temperature is not in our current sources. | |
| GST3D PETG translucent | — | Nozzle temperature is not in our current sources. | |
| GST3D PETG-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| iBOSS 3D Light Gray | — | Whether an enclosure is required is not in our current sources. | |
| IC3D PETG | — | Whether an enclosure is required is not in our current sources. | |
| IC3D PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| IC3D Recycled Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| IEMAI CF-PETG | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| IEMAI PETG | — | Whether an enclosure is required is not in our current sources. | |
| Insignia PETG | — | Nozzle temperature is not in our current sources. | |
| Inslogic PETG CF10 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Inslogic PETG Pro | — | Whether an enclosure is required is not in our current sources. | |
| iSangHu High Speed Translucent PETG | — | Nozzle temperature is not in our current sources. | |
| iSANMATE PETG Clear Glitter | — | Whether an enclosure is required is not in our current sources. | |
| iSANMATE pink | — | Whether an enclosure is required is not in our current sources. | |
| Kimya PETG | — | Whether an enclosure is required is not in our current sources. | |
| KiwiFil PETG | — | Whether an enclosure is required is not in our current sources. | |
| KiwiFil PETG Rainbow "Dark Green Ocean" | — | Whether an enclosure is required is not in our current sources. | |
| KiwiFil PETG Rainbow "Dark Purple Galaxy" | — | Whether an enclosure is required is not in our current sources. | |
| L3D PETG | — | Nozzle temperature is not in our current sources. | |
| Matter3D Inc Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| Matter3D Inc PETG | — | Whether an enclosure is required is not in our current sources. | |
| Matter3D Inc PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| MatterHackers PETG | — | Whether an enclosure is required is not in our current sources. | |
| Nebula PETG Art Chameleon | — | Nozzle temperature is not in our current sources. | |
| Nebula PETG Premium | — | Nozzle temperature is not in our current sources. | |
| Nobufil Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Nobufil Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| Nobufil PETG | — | Whether an enclosure is required is not in our current sources. | |
| Nobufil PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Paramount 3D PETG | — | Whether an enclosure is required is not in our current sources. | |
| Paramount 3D PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Patron EG PETG HS | — | Whether an enclosure is required is not in our current sources. | |
| Polar Filament PETG | — | Whether an enclosure is required is not in our current sources. | |
| PolyLite PETG | — | Nozzle temperature is not in our current sources. | |
| PolyLite Translucent PETG | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator Easyprint PETG | — | Whether an enclosure is required is not in our current sources. | |
| PrimaCreator PETG | — | Whether an enclosure is required is not in our current sources. | |
| PrimaCreator Primaselect PETG | — | Whether an enclosure is required is not in our current sources. | |
| PrimaCreator Primavalue PETG | — | Whether an enclosure is required is not in our current sources. | |
| PrimaSelect PETG CARBON | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| PrimaSelect Solid PETG | — | Nozzle temperature is not in our current sources. | |
| Print With Smile Bicolor Metallic PETG | — | Whether an enclosure is required is not in our current sources. | |
| Print With Smile PETG | — | Whether an enclosure is required is not in our current sources. | |
| Print With Smile PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Print With Smile RE PETG | — | Whether an enclosure is required is not in our current sources. | |
| PrintedSolid Jessie Premium PETG | — | Whether an enclosure is required is not in our current sources. | |
| PrintedSolid PETG | — | Whether an enclosure is required is not in our current sources. | |
| PrintedSolid PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Professional LAB PETG | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PETG Matte | — | Whether an enclosure is required is not in our current sources. | |
| Professional LAB PETG Transparent | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PETG-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Prografen PETG Graphene Light | — | Nozzle temperature is not in our current sources. | |
| Prografen PETG Graphene Strong | — | Nozzle temperature is not in our current sources. | |
| Proteor Print PETG | — | Whether an enclosure is required is not in our current sources. | |
| Push Plastic PETG | — | Whether an enclosure is required is not in our current sources. | |
| Push Plastic PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| QIDI Tech PETG Basic | — | Whether an enclosure is required is not in our current sources. | |
| QIDI Tech PETG Rapido | — | Whether an enclosure is required is not in our current sources. | |
| QIDI Tech PETG Translucent | — | Whether an enclosure is required is not in our current sources. | |
| QIDI Tech PETG-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| QIDI Tech PETG-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| QIDI Tech PETG-Tough | — | Whether an enclosure is required is not in our current sources. | |
| Recreus PET G Hf High Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| Recreus PETG | — | Whether an enclosure is required is not in our current sources. | |
| Recreus PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| RecyclingFabrik PETG | — | Whether an enclosure is required is not in our current sources. | |
| Renkforce PETG | — | Bed temperature is not in our current sources. | |
| ROSA3D Filaments High Speed Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| ROSA3D Filaments High Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| ROSA3D Filaments Matte PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ROSA3D Filaments Pet G Galaxy Hs PETG | — | Whether an enclosure is required is not in our current sources. | |
| ROSA3D Filaments Pet G Hs PETG | — | Whether an enclosure is required is not in our current sources. | |
| ROSA3D Filaments Pet G Structure Hs PETG | — | Whether an enclosure is required is not in our current sources. | |
| ROSA3D Filaments PET-G MDT | — | Whether an enclosure is required is not in our current sources. | |
| ROSA3D Filaments PET-G Standard Neon Green Glow in the Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| ROSA3D Filaments PETG | — | Whether an enclosure is required is not in our current sources. | |
| ROSA3D Filaments PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SainSmart Glossy Gt 3 Silk High Speed PETG | — | Whether an enclosure is required is not in our current sources. | |
| SainSmart Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| SainSmart PETG | — | Whether an enclosure is required is not in our current sources. | |
| SainSmart PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SainSmart Silk PETG | — | Whether an enclosure is required is not in our current sources. | |
| Sakata 3D PETG | — | Whether an enclosure is required is not in our current sources. | |
| Sakata 3D PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Slic3D PETG Basic | — | Whether an enclosure is required is not in our current sources. | |
| SMART MATERIALS 3D PETG | — | Whether an enclosure is required is not in our current sources. | |
| SMART MATERIALS 3D PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SmartPrint PETG | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PETG Transparent | — | Nozzle temperature is not in our current sources. | |
| Snapmaker PETG | — | Nozzle temperature is not in our current sources. | |
| Snapmaker PETG HF | — | Nozzle temperature is not in our current sources. | |
| Spectrum Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Spectrum PET G Matt Matte PETG | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PET-G FR V0 PETG | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PET-G Glitter PETG | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PET-G Premium PETG | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG Carbon | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Spectrum PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum PETG FR V0 | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG FX120 | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG Glitter | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG Glow in the Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Spectrum PETG HT100 | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG MATT | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG Premium | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PETG Premium High Speed | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum PTFE | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum R PETG | — | Whether an enclosure is required is not in our current sources. | |
| TECBEARS Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| TECBEARS PETG | — | Whether an enclosure is required is not in our current sources. | |
| Tectonic 3D Aura PETG | — | Whether an enclosure is required is not in our current sources. | |
| TEQStone PETG | — | Whether an enclosure is required is not in our current sources. | |
| The Filament PETG | — | Whether an enclosure is required is not in our current sources. | |
| The Filament PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| The Filament PETG Lite | — | Whether an enclosure is required is not in our current sources. | |
| TINMORRY Frosted GF PETG | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| TINMORRY Galaxy PETG | — | Whether an enclosure is required is not in our current sources. | |
| TINMORRY Glow PETG | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| TINMORRY Marble PETG | — | Whether an enclosure is required is not in our current sources. | |
| TINMORRY Metallic PETG | — | Whether an enclosure is required is not in our current sources. | |
| TINMORRY PETG | — | Whether an enclosure is required is not in our current sources. | |
| TINMORRY PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| TINMORRY Rapid-Eco PETG | — | Whether an enclosure is required is not in our current sources. | |
| Verbatim PETG | — | Whether an enclosure is required is not in our current sources. | |
| Voxel PLA PETG | — | Whether an enclosure is required is not in our current sources. | |
| Winkle PETG | — | Whether an enclosure is required is not in our current sources. | |
| Winkle PETG CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| XZN PETG | — | Whether an enclosure is required is not in our current sources. | |
| Zyltech PETG | — | Whether an enclosure is required is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Prusa CORE One+ against 295 PETG products: 0 fit, 67 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 228 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare