Fits
Polymaker PVA PolyDissolve S1 on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle215–225 °C (419–437 °F)
- Bed25–60 °C (77–140 °F)
- Speed—
- Dry80 °C (176 °F) for 12 h
- Density1.13 g/cm³
Print at 215–225 °C (419–437 °F) nozzle, 25–60 °C (77–140 °F) bed. Dry 12 h at 80 °C (176 °F) if it's been open.
CORE One+ maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa CORE One+ with Polymaker PVA PolyDissolve S1: CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed PVA PolyDissolve S1 nozzle temperature?
The listed nozzle maximum of 225 °C (437 °F) is within this printer's maximum of 290 °C (554 °F).
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.