Fits
Bambu Lab PLA Aero on the MK4S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle210–260 °C (410–500 °F)
- Bed35–45 °C (95–113 °F)
- Speedup to 180 mm/s
- Dry55 °C (131 °F) for 8 h
- Density1.21 g/cm³
Print at 210–260 °C (410–500 °F) nozzle, 35–45 °C (95–113 °F) bed. Dry 8 h at 55 °C (131 °F) if it's been open. Listed speed up to 180 mm/s.
MK4S maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa MK4S with Bambu Lab PLA Aero: MK4S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PLA Aero technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a Nextruder direct drive, and a brass CHT nozzle.
The comparison table on that page marks the enclosed chamber as not included, with an optional enclosure. MMU3 is optional.
Questions
Can the Prusa MK4S reach the listed PLA Aero nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 290 °C (554 °F).
Can the MK4S reach the listed bed temperature?
The listed bed maximum of 45 °C (113 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.