Partial

extrudr Glow PETG on the XL

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle220–250 °C
Bed70–90 °C
Speed—
Dry—
Density1.27 g/cm³

Print at 220–250 °C nozzle, 70–90 °C bed.

Nozzle220–250 °C

Bed70–90 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

XL maximums: nozzle 290 °C, bed 120 °C.

Filament page · XL

Sources & notes

Prusa XL with extrudr Glow PETG: This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.

Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.

Questions

Can the Prusa XL reach the listed Glow PETG nozzle temperature?

The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C.

Can the XL reach the listed bed temperature?

The listed bed maximum of 90 °C is within this printer's maximum of 120 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.