Fits
Overture High Speed PLA on the XL
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–220 °C (374–428 °F)
- Bed25–60 °C (77–140 °F)
- Speedup to 300 mm/s
- Dry50 °C (122 °F) for 7 h
- Density—
Print at 190–220 °C (374–428 °F) nozzle, 25–60 °C (77–140 °F) bed. Dry 7 h at 50 °C (122 °F) if it's been open. Listed speed up to 300 mm/s.
XL maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa XL with Overture High Speed PLA: XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 14 October 2026. Manufacturer page checked 14 October 2026.
Overture High Speed PLA product page · checked 14 October 2026 · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed High Speed PLA nozzle temperature?
The listed nozzle maximum of 220 °C (428 °F) is within this printer's maximum of 290 °C (554 °F).
Can the XL reach the listed bed temperature?
The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.