Prusa XL
Prusa XL against 62 PA/CF products: 0 fit, 62 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 0 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Bambu Lab PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Bambu Lab PA6-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Bambu Lab PAHT-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Creality Hyper PA6-CF | Partial | The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum. | |
| ELEGOO PAHT-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone PA6-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D ePAHT-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D PA6 PA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| extrudr DuraPro CF PA12 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Inland Carbon Fiber Nylon | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Polymaker PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Polymaker PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Prusament PA11-CF | Partial | The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 275 °C, is within that maximum. | |
| SUNLU PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU PA6-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| 3DEA PA6-CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| 3DXTech PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| 3DXTech PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| AzureFilm PA6 Carbonfiber nylon | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberlogy Nylon PA12+CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberlogy Nylon PA12+CF5 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberlogy PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberon PA12-CF10 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberon PA6-CF20 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberon PA612-CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FiberThree F3 PA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FiberThree F3 PA CF Lite | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FiberThree PA12 CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FiberThree PA6 CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FilamentPM PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FilamentPM PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura LUVOCOM 3F PAHT CF 9742 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura LUVOCOM 3F PAHT CF 9891 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura STYX PA6-CF15 | Partial | The listed nozzle range reaches 295 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 255 °C, is within that maximum. | |
| IEMAI CF-PA12 | Partial | The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 260 °C, is within that maximum. | |
| IEMAI CF-PA6 | Partial | The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 260 °C, is within that maximum. | |
| Inslogic PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Inslogic PA6-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| MatterHackers PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Paramount 3D PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| PrimaCreator PA12 CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| PrimaCreator PA6 CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| PrimaCreator Primaselect PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| PrimaCreator Primaselect PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| PrimaSelect PA6 NylonPower | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Print With Smile PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Professional LAB PA12-CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| QIDI Tech PA12-CF | Partial | The listed nozzle range reaches 300 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum. | |
| ROSA3D Filaments PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SainSmart PA12 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SainSmart PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SmartPrint PA12-CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum PA12 CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum PA6 CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum PA6 Low Warp CF15S | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Tectonic 3D PA11 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Tectonic 3D PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Tectonic 3D Zephyr CF MC CF PA11 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| TINMORRY PA6 CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Prusa XL against 62 PA/CF products: 0 fit, 62 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 0 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare