Bambu Lab ASA-CF on the Q1 Pro
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle250–280 °C
- Bed80–100 °C
- Speedup to 250 mm/s
- Dry80 °C for 8 h
- Density1.02 g/cm³
Print at 250–280 °C nozzle, 80–100 °C bed. Dry 8 h at 80 °C if it's been open. Listed speed up to 250 mm/s.
Q1 Pro maximums: nozzle 350 °C, bed not in our current sources.
Sources & notes
Qidi Q1 Pro with Bambu Lab ASA-CF: This printer's maximum bed temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab ASA-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Qidi lists print head temperature ≤350 °C, a direct extruder, and 60 °C independent chamber heating.
The stock nozzle is described as bimetal. A hardened-steel nozzle is a separate product, so the stock hardened-nozzle field is empty.
The specification table checked here does not list a maximum bed temperature. The product page says the Q1 Pro is discontinued.
Questions
Can the Qidi Q1 Pro reach the listed ASA-CF nozzle temperature?
The listed nozzle maximum of 280 °C is within this printer's maximum of 350 °C.
Can the Q1 Pro reach the listed bed temperature?
This printer's maximum bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.