Partial
ELEGOO PET-CF on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle260–290 °C (500–554 °F)
- Bed90–110 °C (194–230 °F)
- Speed—
- Dry85 °C (185 °F) maximum
- Density1.32 g/cm³
Print at 260–290 °C (500–554 °F) nozzle, 90–110 °C (194–230 °F) bed. Dry at 85 °C (185 °F) if it's been open. No drying time on the source.
SV08 Max maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Sovol SV08 Max with ELEGOO PET-CF: The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed PET-CF nozzle temperature?
The listed nozzle maximum of 290 °C (554 °F) is within this printer's maximum of 300 °C (572 °F).
Can the SV08 Max reach the listed bed temperature?
The listed bed range reaches 110 °C (230 °F), above this printer's maximum of 100 °C (212 °F). This printer cannot reach the full recommended range. The low end, 90 °C (194 °F), is within that maximum.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.