Bambu Lab PPA-CF
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed100–120 °C
- Speedup to 100 mm/s
- Dry—
- Density1.25 g/cm³
Those settings follow the Bambu Lab PPA-CF technical data sheet. Where an older database figure disagrees, the note is under Sources & notes.
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Bed range only partly in reach
- A1 miniBed too hot to print
- P1PBed range only partly in reach
- P1SBed range only partly in reach
- X1CBed range only partly in reach
- MK4SNeeds a hardened nozzle
- Core One+Needs a hardened nozzle
- XLNeeds a hardened nozzle
- K1CBed range only partly in reach
- CentauriNot enough data
- Kobra 3 MaxBed too hot to print
- Q1 ProNot enough data
- SV08 MaxBed range only partly in reach
Colors
- Black#000000
Related
Answers
- Are carbon fiber filaments worth it, and do I need a hardened nozzle?
- Do I need to dry filament, and how?
Sources & notes
Bambu Lab PPA-CF (PPA) lists no nozzle temperature on the sheet and 100–120 °C bed, from Bambu Lab PPA-CF technical data sheet (https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_PPA-CF_Technical_Data_Sheet_2ab26420-79f5-4692-888e-090006814050.pdf?v=1724815044), checked 2026-10-14.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PPA-CF technical data sheet · Safety sheet · Brand site · Page JSON
Full specifications
| Material | PPA |
|---|---|
| Nozzle temperature | — |
| Bed temperature | 100–120 °C |
| Print speed | up to 100 mm/sVolumetric flow was not on the source. |
| Volumetric flow | — |
| Drying | — |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | YesEvery color variant is tagged abrasive and fiber-filled in the Open Filament Database. That database has no hardened-nozzle boolean. Its trait rules treat carbon-fiber and glass-fiber composites tagged abrasive as needing a hardened nozzle. |
| Spool weight | 750 g |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.05 mmRecorded by the Open Filament Database. It is a required field there, including conventional values. |
| Recorded density | 1.25 g/cm³Recorded by the Open Filament Database. It is a required field there, including conventional values. |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Manufacturer page checked | 14 October 2026Bambu Lab PPA-CF technical data sheet |
| Dataset imported | 13 October 2026Open Filament Database generation date, not a lab test. |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 100 °C, is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab A1 mini | Outside limits | Nozzle temperature is not in our current sources. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab P1P | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 100 °C, is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab P1S | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 100 °C, is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab X1 Carbon | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 120 °C, above this printer's maximum of 110 °C. This printer cannot reach the full recommended range. The low end, 100 °C, is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Prusa MK4S | Partial | Nozzle temperature is not in our current sources. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Prusa CORE One+ | Partial | Nozzle temperature is not in our current sources. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Prusa XL | Partial | Nozzle temperature is not in our current sources. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Creality K1C | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 100 °C, is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Elegoo Centauri Carbon | — | Nozzle temperature is not in our current sources. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Anycubic Kobra 3 Max | Outside limits | Nozzle temperature is not in our current sources. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. |
| Qidi Q1 Pro | — | Nozzle temperature is not in our current sources. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. |
| Sovol SV08 Max | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 120 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 100 °C, is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. |
Questions
What nozzle temperature does Bambu Lab PPA-CF recommend?
A recommended nozzle temperature for Bambu Lab PPA-CF is not in our current sources.
What bed temperature does Bambu Lab PPA-CF recommend?
Bambu Lab PPA-CF lists a recommended bed temperature of 100–120 °C on the manufacturer technical data sheet.
What print speed does Bambu Lab PPA-CF list?
Bambu Lab PPA-CF lists a print speed up to 100 mm/s on the manufacturer technical data sheet. Volumetric flow is not on that sheet.
Does Bambu Lab PPA-CF require an enclosure?
An enclosure requirement is not in our current sources. No chamber temperature is listed either.
Does Bambu Lab PPA-CF require a hardened nozzle?
Every color variant is tagged abrasive and fiber-filled in the Open Filament Database. That database has no hardened-nozzle boolean. Its trait rules treat carbon-fiber and glass-fiber composites tagged abrasive as needing a hardened nozzle.
How should Bambu Lab PPA-CF be dried?
Drying temperature and drying time for Bambu Lab PPA-CF are not in our current sources.
What spool weights does Bambu Lab PPA-CF come in?
Listed spool weights: 750 g.
What is the price per kilogram of Bambu Lab PPA-CF?
Price per kilogram is not in our current sources.
Provenance
Open Filament Database
License MIT. Record. Repository. Fields: brand, colors, densityGCm3, diameterToleranceMm, diametersMm, material, product, spoolWeightsG.
Bambu Lab PPA-CF technical data sheet
License Manufacturer technical data sheet. Record. Repository. Fields: bedTempC, speeds.printMmS.