Partial
Bambu Lab PPA-CF on the MK4S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle280–310 °C
- Bed100–120 °C
- Speedup to 100 mm/s
- Dry—
- Density1.25 g/cm³
Print at 280–310 °C nozzle, 100–120 °C bed. Listed speed up to 100 mm/s.
MK4S maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa MK4S with Bambu Lab PPA-CF: The listed nozzle range reaches 310 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PPA-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a Nextruder direct drive, and a brass CHT nozzle.
The comparison table on that page marks the enclosed chamber as not included, with an optional enclosure. MMU3 is optional.
Questions
Can the Prusa MK4S reach the listed PPA-CF nozzle temperature?
The listed nozzle range reaches 310 °C, above this printer's maximum of 290 °C. This printer cannot reach the full recommended range. The low end, 280 °C, is within that maximum.
Can the MK4S reach the listed bed temperature?
The listed bed maximum of 120 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.