Bambu Lab A1 mini
Bambu Lab A1 mini against 62 PA/CF products: 0 fit, 60 cannot reach the full recommended range, 2 cannot print this material at a recommended temperature, and 0 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Bambu Lab PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Bambu Lab PA6-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Bambu Lab PAHT-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Creality Hyper PA6-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ELEGOO PAHT-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone PA6-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D ePAHT-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D PA6 PA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| extrudr DuraPro CF PA12 | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Inland Carbon Fiber Nylon | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Polymaker PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Polymaker PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Prusament PA11-CF | Outside limits | The listed bed temperature starts at 95 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| SUNLU PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU PA6-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| 3DEA PA6-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| 3DXTech PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| 3DXTech PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| AzureFilm PA6 Carbonfiber nylon | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberlogy Nylon PA12+CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberlogy Nylon PA12+CF5 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberlogy PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Fiberon PA12-CF10 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberon PA6-CF20 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Fiberon PA612-CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FiberThree F3 PA CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FiberThree F3 PA CF Lite | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FiberThree PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FiberThree PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FilamentPM PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FilamentPM PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FormFutura LUVOCOM 3F PAHT CF 9742 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura LUVOCOM 3F PAHT CF 9891 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FormFutura PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FormFutura STYX PA6-CF15 | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| IEMAI CF-PA12 | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| IEMAI CF-PA6 | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Inslogic PA12-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Inslogic PA6-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| MatterHackers PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Paramount 3D PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| PrimaCreator PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| PrimaCreator PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| PrimaCreator Primaselect PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| PrimaCreator Primaselect PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| PrimaSelect PA6 NylonPower | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Print With Smile PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Professional LAB PA12-CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| QIDI Tech PA12-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ROSA3D Filaments PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| SainSmart PA12 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| SainSmart PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| SmartPrint PA12-CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum PA12 CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum PA6 CF15 | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Spectrum PA6 Low Warp CF15S | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Tectonic 3D PA11 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Tectonic 3D PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Tectonic 3D Zephyr CF MC CF PA11 | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| TINMORRY PA6 CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab A1 mini against 62 PA/CF products: 0 fit, 60 cannot reach the full recommended range, 2 cannot print this material at a recommended temperature, and 0 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare