Bambu Lab
Bambu Lab A1 mini
Filter a material table with this printer. The source URL is under Sources & notes.
- Nozzle max300 °C
- Bed max80 °C
- Enclosure—
- HardenedNo
- AMS / MMUAMS lite
Sources & notes
The Bambu Lab A1 mini lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 80 °C, according to https://bambulab.com/en/a1-mini/tech-specs. Checked 2026-10-14.
Source checked 14 October 2026.
| Maximum nozzle | 300 °C |
|---|---|
| Maximum bed | 80 °C |
| Enclosure | Not listed |
| Stock nozzle hardened | No |
| Direct drive | Not listed |
| AMS or MMU | AMS lite; AMS, AMS 2 Pro, and AMS HT need the AMS hub |
Bambu Lab lists a 300 °C maximum hot end temperature, an 80 °C maximum build plate temperature, and a stainless steel nozzle.
The FAQ says a hardened steel nozzle is required for carbon-fiber or glass-fiber filament and is not the pre-installed nozzle.
Enclosure is not stated on the specification table checked here.
Questions
What maximum nozzle temperature does the Bambu Lab A1 mini list?
300 °C, according to https://bambulab.com/en/a1-mini/tech-specs.
What maximum bed temperature does the Bambu Lab A1 mini list?
80 °C, according to https://bambulab.com/en/a1-mini/tech-specs.
Is the A1 mini enclosed?
Enclosure is not stated in the source checked for this record.
Does the A1 mini ship with a hardened nozzle?
The source describes a stock nozzle that is not hardened.
Materials on this printer
Open a material to see which listed limits the A1 mini can meet.