Fits
Bambu Lab PLA Basic on the A1
A1 can reach the listed nozzle and bed.
- Nozzle190–230 °C
- Bed35–45 °C
- Speedup to 300 mm/s
- Dry50 °C for 8 h
- Density1.24 g/cm³
A1 maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab A1 with Bambu Lab PLA Basic: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 45 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Bambu PLA Basic technical data sheet V3.0 · checked 14 October 2026 · Printer source · Filament JSON
The A1 FAQ states a maximum hotend temperature of 300 °C and a maximum heatbed temperature of 100 °C.
The same FAQ says the printer is pre-installed with a 0.4 mm stainless steel nozzle. Hardened steel nozzles are sold separately.
The FAQ does not call the frame open or enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab A1 reach the listed PLA Basic nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C.
Can the A1 reach the listed bed temperature?
The listed bed maximum of 45 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.