Outside limits
Bambu Lab PA6-CF on the P1P
As an Amazon Associate we earn from qualifying purchases.
P1P needs a hardened nozzle for this filament.
- Nozzle250–290 °C
- Bed80–100 °C
- Speedup to 100 mm/s
- Dry—
- Density1.09 g/cm³
P1P maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab P1P with Bambu Lab PA6-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed PA6-CF nozzle temperature?
The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C.
Can the P1P reach the listed bed temperature?
The listed bed maximum of 100 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.