Fits
Overture High Speed PLA on the P1S
P1S can reach the listed nozzle and bed.
- Nozzle190–220 °C
- Bed25–60 °C
- Speedup to 300 mm/s
- Dry50 °C for 7 h
- Density—
P1S maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab P1S with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 14 October 2026. Printer source checked 14 October 2026.
Overture High Speed PLA product page · checked 14 October 2026 · Printer source · Filament JSON
The P1S specification table lists a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate. The shell is plastic and glass.
Bambu Lab describes the P1S as a fully enclosed body and says fiber-reinforced filament is not recommended until the extruder and hotend are upgraded.
The P1 series page describes a direct-drive extruder and AMS multi-color printing.
Questions
Can the Bambu Lab P1S reach the listed High Speed PLA nozzle temperature?
The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C.
Can the P1S reach the listed bed temperature?
The listed bed maximum of 60 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.