Fits
Bambu Lab PETG HF on the P2S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle230–260 °C (446–500 °F)
- Bed65–75 °C (149–167 °F)
- Speedup to 300 mm/s
- Dry65 °C (149 °F) for 8 h
- Density1.28 g/cm³
Print at 230–260 °C (446–500 °F) nozzle, 65–75 °C (149–167 °F) bed. Dry 8 h at 65 °C (149 °F) if it's been open. Listed speed up to 300 mm/s.
P2S maximums: nozzle 300 °C (572 °F), bed 110 °C (230 °F).
Sources & notes
Bambu Lab P2S with Bambu Lab PETG HF: P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 15 October 2026.
Bambu Lab PETG HF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The P2S technical specifications list a hardened steel nozzle, a 300 °C maximum nozzle temperature, and a 110 °C maximum heatbed temperature.
The product page describes printing with the door closed, a shatter-safe front glass, and a chamber that seals heat. The X2D comparison labels the P2S enclosed.
The product page also says the chamber is ready at 50 °C. That is chamber air, not the heatbed maximum stored here.
Filament odometry on the specification is supported with AMS. The page does not say an AMS is in the box, and it does not name the extruder direct drive.
Questions
Can the Bambu Lab P2S reach the listed PETG HF nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 300 °C (572 °F).
Can the P2S reach the listed bed temperature?
The listed bed maximum of 75 °C (167 °F) is within this printer's maximum of 110 °C (230 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.