Bambu Lab
Bambu Lab P2S
Filter a material table with this printer. The source URL is under Sources & notes.
- Nozzle max300 °C (572 °F)
- Bed max110 °C (230 °F)
- Enclosureenclosed
- HardenedStock
- AMS / MMUAMS
Sources & notes
The Bambu Lab P2S lists a maximum nozzle temperature of 300 °C (572 °F) and lists a maximum bed temperature of 110 °C (230 °F), according to https://bambulab.com/en/p2s/specs. Manufacturer page checked 2026-10-15.
Source checked 15 October 2026.
| Maximum nozzle | 300 °C (572 °F) |
|---|---|
| Maximum bed | 110 °C (230 °F) |
| Enclosure | enclosed |
| Stock nozzle hardened | Yes |
| Direct drive | — |
| AMS or MMU | AMS |
The P2S technical specifications list a hardened steel nozzle, a 300 °C maximum nozzle temperature, and a 110 °C maximum heatbed temperature.
The product page describes printing with the door closed, a shatter-safe front glass, and a chamber that seals heat. The X2D comparison labels the P2S enclosed.
The product page also says the chamber is ready at 50 °C. That is chamber air, not the heatbed maximum stored here.
Filament odometry on the specification is supported with AMS. The page does not say an AMS is in the box, and it does not name the extruder direct drive.
Questions
What maximum nozzle temperature does the Bambu Lab P2S list?
300 °C (572 °F), according to https://bambulab.com/en/p2s/specs.
What maximum bed temperature does the Bambu Lab P2S list?
110 °C (230 °F), according to https://bambulab.com/en/p2s/specs.
Is the P2S enclosed?
Recorded as enclosed.
Does the P2S ship with a hardened nozzle?
The source describes a hardened stock nozzle.
Materials on this printer
Open a material to see which listed limits the P2S can meet.