Bambu Lab P2S
Bambu Lab P2S against 62 PA/CF products: 44 fit, 1 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 17 are missing an essential check. Manufacturer page checked 15 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Bambu Lab PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PA6-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PAHT-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Hyper PA6-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PAHT-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone PA12-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone PA6-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ePAHT-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PA12-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PA6 PA-CF | — | Nozzle temperature is not in our current sources. | |
| extrudr DuraPro CF PA12 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland Carbon Fiber Nylon | — | Nozzle temperature is not in our current sources. | |
| Polymaker PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament PA11-CF | Partial | The listed bed range reaches 115 °C (239 °F), above this printer's maximum of 110 °C (230 °F). This printer cannot reach the full recommended range. The low end, 95 °C (203 °F), is within that maximum. | |
| SUNLU PA12-CF | — | Nozzle temperature is not in our current sources. | |
| SUNLU PA6-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PA6-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm PA6 Carbonfiber nylon | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Nylon PA12+CF15 | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Nylon PA12+CF5 | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberon PA12-CF10 | — | Nozzle temperature is not in our current sources. | |
| Fiberon PA6-CF20 | — | Nozzle temperature is not in our current sources. | |
| Fiberon PA612-CF15 | — | Nozzle temperature is not in our current sources. | |
| FiberThree F3 PA CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree F3 PA CF Lite | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura LUVOCOM 3F PAHT CF 9742 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura LUVOCOM 3F PAHT CF 9891 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura STYX PA6-CF15 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-PA12 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-PA6 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic PA12-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic PA6-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect PA6 NylonPower | — | Nozzle temperature is not in our current sources. | |
| Print With Smile PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB PA12-CF15 | — | Nozzle temperature is not in our current sources. | |
| QIDI Tech PA12-CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart PA12 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint PA12-CF15 | — | Nozzle temperature is not in our current sources. | |
| Spectrum PA12 CF15 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PA6 CF15 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PA6 Low Warp CF15S | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D PA11 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Zephyr CF MC CF PA11 | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PA6 CF | Fits | P2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab P2S against 62 PA/CF products: 44 fit, 1 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 17 are missing an essential check. Manufacturer page checked 15 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare