Bambu Lab X2D
Bambu Lab X2D against 113 ASA products: 95 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 15 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA Aero | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab Matte ASA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-GF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ASA+ | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro Matte ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum ASA Extrafill | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| Polymaker ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart ASA-GF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| 3DPower ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA 3DXMax | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Dolos Color Shifting | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Galactic | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA-GF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Original | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Prime | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Silk ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Matte ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberon Fiberon ASA-CF 08 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA Basic | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX CF10 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Flame Retardant | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Foaming | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Kevlar | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ReForm – rApollo | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| IEMAI ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| iSANMATE ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA-CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Mosaic ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X CF CF ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite ASA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA-Aero | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA 5Kevlar | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA GF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA GF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA 275 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA CF | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA Kevlar | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X CF10 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X GF10 | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum X Gf10 GF ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | — | Nozzle temperature is not in our current sources. | |
| TINMORRY ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Voxelab ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Winkle ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Matte ASA | Fits | X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab X2D against 113 ASA products: 95 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 15 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare