Bambu Lab Support for ABS on the K1C

Search Amazon

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle—
Bed80–100 °C
Speedup to 100 mm/s
Dry80 °C for 4 h
Density1.16 g/cm³

Bed 80–100 °C. No nozzle temperature on the source. Dry 4 h at 80 °C if it's been open. Listed speed up to 100 mm/s.

Nozzle—

Bed80–100 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

K1C maximums: nozzle 300 °C, bed 100 °C.

Filament page · K1C

Sources & notes

Creality K1C with Bambu Lab Support for ABS: Nozzle temperature is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Bambu Lab Support for ABS technical data sheet · checked 14 October 2026 · Printer source · Filament JSON

Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.

Questions

Can the Creality K1C reach the listed Support for ABS nozzle temperature?

Nozzle temperature is not in our current sources.

Can the K1C reach the listed bed temperature?

The listed bed maximum of 100 °C is within this printer's maximum of 100 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

A hardened nozzle is not recorded for this filament.