Bambu Lab Support for ABS
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed80–100 °C
- Speedup to 100 mm/s
- Dry80 °C for 4 h
- Density1.16 g/cm³
Those settings follow the Bambu Lab Support for ABS technical data sheet. Where an older database figure disagrees, the note is under Sources & notes.
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Not enough data
- A1 miniBed range only partly in reach
- P1PNot enough data
- P1SNot enough data
- X1CNot enough data
- MK4SNot enough data
- Core One+Not enough data
- XLNot enough data
- K1CNot enough data
- CentauriNot enough data
- Kobra 3 MaxBed range only partly in reach
- Q1 ProNot enough data
- SV08 MaxNot enough data
Colors
- White#FFFFFF
Related
Answers
Sources & notes
Bambu Lab Support for ABS (PVA) lists no nozzle temperature on the sheet and 80–100 °C bed, from Bambu Lab Support for ABS technical data sheet (https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_Support_for_ABS_Technical_Data_Sheet.pdf?v=1721786140), checked 2026-10-14.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab Support for ABS technical data sheet · Safety sheet · Brand site · Page JSON
Full specifications
| Material | PVA |
|---|---|
| Nozzle temperature | — |
| Bed temperature | 80–100 °C |
| Print speed | up to 100 mm/sVolumetric flow was not on the source. |
| Volumetric flow | — |
| Drying | 80 °C for 4 h |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | — |
| Spool weight | 500 g |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.05 mmRecorded by the Open Filament Database. It is a required field there, including conventional values. |
| Recorded density | 1.16 g/cm³Recorded by the Open Filament Database. It is a required field there, including conventional values. |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Manufacturer page checked | 14 October 2026Bambu Lab Support for ABS technical data sheet |
| Dataset imported | 13 October 2026Open Filament Database generation date, not a lab test. |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab A1 mini | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1P | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1S | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab X1 Carbon | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 110 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa MK4S | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa CORE One+ | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa XL | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Creality K1C | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Elegoo Centauri Carbon | — | Nozzle temperature is not in our current sources. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Anycubic Kobra 3 Max | Partial | Nozzle temperature is not in our current sources. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Qidi Q1 Pro | — | Nozzle temperature is not in our current sources. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Sovol SV08 Max | — | Nozzle temperature is not in our current sources. The listed bed maximum of 100 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
Questions
What nozzle temperature does Bambu Lab Support for ABS recommend?
A recommended nozzle temperature for Bambu Lab Support for ABS is not in our current sources.
What bed temperature does Bambu Lab Support for ABS recommend?
Bambu Lab Support for ABS lists a recommended bed temperature of 80–100 °C on the manufacturer technical data sheet.
What print speed does Bambu Lab Support for ABS list?
Bambu Lab Support for ABS lists a print speed up to 100 mm/s on the manufacturer technical data sheet. Volumetric flow is not on that sheet.
Does Bambu Lab Support for ABS require an enclosure?
An enclosure requirement is not in our current sources. No chamber temperature is listed either.
Does Bambu Lab Support for ABS require a hardened nozzle?
A hardened-nozzle requirement is not in our current sources.
How should Bambu Lab Support for ABS be dried?
Dry Bambu Lab Support for ABS for 4 h at 80 °C, from the manufacturer technical data sheet.
What spool weights does Bambu Lab Support for ABS come in?
Listed spool weights: 500 g.
What is the price per kilogram of Bambu Lab Support for ABS?
Price per kilogram is not in our current sources.
Provenance
Open Filament Database
License MIT. Record. Repository. Fields: brand, colors, densityGCm3, diameterToleranceMm, diametersMm, material, product, spoolWeightsG.
Bambu Lab Support for ABS technical data sheet
License Manufacturer technical data sheet. Record. Repository. Fields: bedTempC, speeds.printMmS, drying.