Bambu Lab Support for ABS on the XL

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Bed 80–100 °C. No nozzle temperature on the source. Dry 4 h at 80 °C if it's been open. Listed speed up to 100 mm/s.

Nozzle—

Bed80–100 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

XL maximums: nozzle 290 °C, bed 120 °C.

Sources & notes

Prusa XL with Bambu Lab Support for ABS: Nozzle temperature is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.

Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.

Questions

Nozzle temperature is not in our current sources.

The listed bed maximum of 100 °C is within this printer's maximum of 120 °C.

Whether an enclosure is required is not in our current sources.

A hardened nozzle is not recorded for this filament.