Incomplete
Prusament PETG V0 on the XL
Not enough published numbers to say if XL can print this.
- NozzleNot listed
- BedNot listed
- SpeedNot listed
- Dry—
- Density1.27 g/cm³
XL maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa XL with Prusament PETG V0: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed PETG V0 nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the XL reach the listed bed temperature?
Bed temperature is not listed for this filament.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.