FilamentFacts

Outside limits

Polymaker Polylite ASA on the SV08 Max

Buy

As an Amazon Associate we earn from qualifying purchases.

SV08 Max cannot reach the listed nozzle temperature.

Nozzle235–260 °C
Bed90–110 °C
Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

SV08 Max maximums: nozzle 300 °C, bed 100 °C.

Filament page · SV08 Max

Sources & notes

Sovol SV08 Max with Polymaker Polylite ASA: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.

Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.

Filament source · Printer source · Filament JSON

Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.

Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.

Questions

Can the Sovol SV08 Max reach the listed Polylite ASA nozzle temperature?

The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C.

Can the SV08 Max reach the listed bed temperature?

The listed bed range reaches 110 °C, above this printer's maximum of 100 °C.

Is an enclosure required?

Enclosure required is not listed for this filament.

Is a hardened nozzle recorded?

A hardened nozzle is not recorded for this filament.